Report on PO No. and PO Creater

Hi Gurus,
Is there any standard report which gives PO No. and PO Creater Name??
Please tell me how can we solve this issue.
Thank You

hi,
check report ME2N , use the dynamic selection shift + F4...in the PO header details use the created by option and enter the data and execute it..
Regards
Priyanka.P

Similar Messages

Travel and Expenses / Create Expense report / Mileage Details

Hi all,
I have a requirement to do some validations whenever the user enters the license plate number in
ESS Travel and Expenses / Create Expense report / Mileage Details .The system must throw a message if the user enters a wrong license plate number.
How do i know whether this is ABAP WD iview or JWD iview.IS there any BADI or BAPI for the validations.
Where is the information about License plate getting saved.
I have created a custom infotype for my requirement. The license plate must be validated from the data present in this infotype.
Can someone post me some advice on this please.
Thanks,
Anil

Achieved by enhancing WDA Component FITE_VC_MILEAGE, view DETAILS_VIEW and added a post-method exit call to check if the licence plate entered by the users match the one saved on infotype 0017 or our custom infotype. So when the user clicks on either 'Accept' or 'Accept and New entry' buttons the license plate is check with the data stored on IT0017 or your custom infotype - If the license plate match then the user should be able to save the record but if this doesn't match then the system should throw an error message. created a custom message class in SE91.

My Trips and Expenses - Create new expense report is not coming up..

Hi,
We are facing a issue in T&E that, when we try to click on "Create new Expense Report" from My Trips and Expenses it is not coming up..
And same when we execute the backend application through SE80 it is coming fine.
Please anyone suggest the root cause..
Your help would be much appreciated...

Hi Veer,
Yes, I just tested this thing out in 11.1.1.5. Please find more details below.
1. I create a sample 'BIConsumer' user.
2. Logged into the BI Server.
3. Navigated to Catalog and clicked on New
4. I could get only two options 'Report Job' and 'Action Intelligence'.
To provide proper privileges,
1. Logged into BI Server as BIAdministrator.
2. Navigated to Administration -> Manage Privileges -> Catalog/
3. Given explicit permissions to 'BIConsumer' to create folders and 'My folders and Dashboard'.
To verify,
1. Logged back to BI Server as 'BIConsumer' user.
2. Now, in the catalog could see 'New Folder' option under 'My folders'
For further analysis, can you please check which roles this particular user is having? You can click on username at the top right corner -> My Account->Roles and Catalog Groups.
Thank you,
Dhar

Report for daily production and daily sales

Can you any body Please let me know which fields we should pick to create custom report containing production qty and sales qty day wise for each material

Hi Veesh,
Whats the scenario you using there? i mean to ask
Discrete
REM
or
PP-PI
Thanks & Regards,
Abu Arbab

Crystal Report for Sales, Delivery and Payment.

Hi Guys,
Need some expert advice over here. Currently, our sales team are using 3 separate report, one report on sales per month for each specific customers, one report on delivered amount per month for specific customers again and the last one report on payment received per month for specific customers as well.
We have the idea of joining this 3 report so that I can report on sales, delivery and payment all at once so that they can see the trend better. However, after trying for quite a few times, we fail to create a common joining between ORDR, ODLN and ORCT. Is there any possible way to work something out ?
I have thought of using subreport, but I just cant find the way to plug in the figure correctly.
Need some advice over there.
Thank you.
Best Regards,
Alex

Based on what you have told me, then you should then join Sales Order, Delivery, Invoice and Incoming Payments into one.
The reason I say Invoice table also is because, you cannot directly link Delivery and Incoming Payments window.
Also you it is not enough that you link the ORDR, ODLN and ORCT, you will need to get the details from RDR1 and DLN1.
In SAP Business One, each line in SAP Business One can have a different Delivery documnet.
The TrgetEntry, TargetType will give you this information. For example, if a line for Sales Order has TargetType 15, then TrgetEntry will be the DocEntry in the ODLN. But if it TargetType is 13 it means the Sales order was converted directly to and Invoice and bypassed the creation of Delivery step, which is possible in SAP.
So here is how I think you will need to link Sales order and Delivery
RDR1.TrgetEntry INNER JOIN DLN1.DocEntry AND
RDR1.TargetType INNER JOIN DLN1.ObjType AND
RDR1.LineNum INNER JOIN DLN1.BaseLine
Now this could get a little more complicated if you do partial deliveries. For example if a line in your Sales Order has say 10 items and 6 of them are delivered using Delivery Note 123 and the remaining are delivered using Delivery Note 124, then the join will give you 2 different lines.
So basically you will need to link the tables in this fashion
ORDR <-> RDR1 <-> DLN1 <-> INV1 <-> RCT2 <-> ORCT
Unfortunately, this linking process can get complicated if you do not follow certain steps, like for example if you do not create a Delivery Note and converted your Sales order to Invoice. Then the link would be
ORDR <-> RDR1 <-> INV1 <-> RCT2 <-> ORCT
I hope I didn't confuse you.
Krishnan

Cannot delete reports, unless I close and open Eclipse/Tomcat

Please can someone help me.
I cannot delete reports. I have not worked out all the details yet but this is what I got so far...
First I thought it was a problem with my tomcat setup, I would deploy my WAR and run the app. After
viewing the report and closing the browser. I would not beable to delete the rpt file until I close Tomcat.
I have now got a similar problem within Eclipse. (as far as I can tell its the same problem but even worse)
If i create any report and design it or even a new blank report. And not do anything to it, just save it as a blank report. I then try delete the
report. Right click and then delete.
After a few seconds Eclipse brings up an error and says it cant delete the file, the reason it gives is
Problems encountered while deleting resources.
Could not delete 'C:\WorkSpace\Project\WebContent\Report1.rpt'.
    Problems encountered while deleting files.
      Could not delete: C:\WorkSpace\Project\WebContent\Report1.rpt.
I have tried creating a fresh new project and only one report. And I still get the error.
If I try delete the whole project perminatly it also gives the same error. (But deletes the default crystal report)
I have to close Eclipse and then open it again before I can delete the rpt files properly.
I have not always had this problem. It used to work fine (dont ask what I have done since
cause I would not beable to tell, sorry)
Hopefully someone can help me, as this is driving me insane, and having to stop and start Tomcat every
time I want to deploy a new test version is not really an option.
Cheers
Darren

Hi Merry,
Thanks for getting back to me.
My reports within Eclipse seem to be behaving themselves now and dying gracefully without and hassles,
so I dont know what fixed that problem as I have not made any changes or done any updates. One of
those things I guess.
With regards to TOMCAT still having a handle on the reports, As far as I am aware I am putting the
report source in session
Below is my JSP that loads the report
I store report name in session via a servlet and set all the DB connection details in the servlet also.
imports....
try {
   String reportName = session.getAttribute("Report").toString();
   ReportClientDocument clientDoc = (ReportClientDocument) session.getAttribute(reportName);
   if (clientDoc == null) {
      clientDoc = new ReportClientDocument();
      // Open report
      clientDoc.open(reportName, OpenReportOptions._openAsReadOnly);
      // ****** BEGIN LOGON DATASOURCE SNIPPET ****************
         //Call the process to set all the database detail retrieved from web.xml
         // Custom function to set the connection details
         ReportFunctions.setConnection(clientDoc);
      // ****** END LOGON DATASOURCE SNIPPET ****************
      // Store the report document in session
      session.setAttribute(reportName, clientDoc);
   // ****** BEGIN CONNECT CRYSTALREPORTPAGEVIEWER SNIPPET ****************
      // Create the CrystalReportViewer object
      CrystalReportViewer crystalReportPageViewer = new CrystalReportViewer();
      //set the reportsource property of the viewer
      IReportSource reportSource = clientDoc.getReportSource();
      crystalReportPageViewer.setReportSource(reportSource);
      // set viewer attributes
      crystalReportPageViewer.setOwnPage(true);
      crystalReportPageViewer.setOwnForm(true);
      crystalReportPageViewer.setDisplayGroupTree(false);
      crystalReportPageViewer.setHasToggleGroupTreeButton(false);
      crystalReportPageViewer.setHasPrintButton(false);
      crystalReportPageViewer.setEnableDrillDown(false);
      // Process the report
      crystalReportPageViewer.processHttpRequest(request, response, application, null);
   // ****** END CONNECT CRYSTALREPORTPAGEVIEWER SNIPPET ****************
   } catch (ReportSDKExceptionBase e) {
    out.println(e);
So far its very basic.
How best can I kill and clean up once the web page is closed. I have tried a few options but dont seem to
know the best way,
I tried "onbeforeunload" but I dont know if this is the best practice,
I have a session listener with sessionDestroyed but have not learnt how to envoke this correctly, or atleast when to correctly call it. And then I dont know how to clean out any loaded reports from here.
I have used
request.getSession().invalidate();
at the end of my JSP but that destoys everything everytime a user does anything on the page, (selecting any of the buttons on the report)
I am still learning everyday, and so I appoligise for questions that I should really know, am being pushed into the deep end here so trying my best :).
Thanks again.
Cheers
Darren
Sorry for bumping this back the list, but I am at my wits end as how best to "clean out" the reports
once they have been closed or timed out.
Surely there must be a way to release all objects (be it a actaul rpt file or the classes12.jar) once the
reports have been viewed and closed.
Even if there is something I can load via another servlet that destroys anything that has to do
with the main website.
Thanks and again sorry for moving this back up the list. If i get no replies, ill assume this is impossible
and that the only way to upload a new version of a report is to shut the whole Tomcat service and
make the changes.
Cheers
Edited by: Darren Jackson on Dec 3, 2008 12:31 PM

SQL Query (updateable report) Region - Conditionally Hide and Set Values

SQL Query (updateable report) Region - Conditionally Hide and Set Values
Outline of requirement :-
Master / Detail page with Detail updated on same page using SQL Query (updateable report).
The detail region has the following source
SELECT item_id,
       contract_id,
       CASE WHEN hardware_id IS NOT NULL THEN
               'HA'
            WHEN backup_dev_id IS NOT NULL THEN
               'BD'
            WHEN hardware_os_id IS NOT NULL THEN
               'HS'
       END item_type,
       hardware_id,
       backup_dev_id,
       hardware_os_id
FROM   "#OWNER#".support_items
WHERE contract_id = :P26_CONTRACT_IDThe table support_items implements arced relationships and has the following columns
CREATE TABLE SUPPORT_ITEMS
ITEM_ID         NUMBER                        NOT NULL,
CONTRACT_ID     NUMBER                        NOT NULL,
HARDWARE_ID     NUMBER,
BACKUP_DEV_ID   NUMBER,
HARDWARE_OS_ID NUMBER
)A check type constaint on support_items ensures that only one of the fk's is present.
      (    hardware_id    IS NOT NULL
       AND backup_dev_id IS NULL
       AND hardware_os_id IS NULL
OR    (    hardware_id    IS NULL
       AND backup_dev_id IS NOT NULL
       AND hardware_os_id IS NULL
OR    (    hardware_id    IS NULL
       AND backup_dev_id IS NULL
       AND hardware_os_id IS NOT NULL
      )    Hardware_Id is a FK to Hardware_Assets
Backup_dev_id is a FK to Backup_Devices
Hardware_os_id is a FK to Hardware_op_systems
The Tabular Form Element based on item_type column of SQL query is Displayed As Select List (based on LOV) referencing a named list of values which have the following properties
Display Value     Return Value
Hardware Asset    HA
Backup Device     BD
Computer System   HSThe Tabular Form Elements for the report attributes for hardware_id, backup_dev_id and hardware_os_id are all Displayed As Select List (Based on LOV).
What I want to do is only display the Select List for the FK depending on the value of the Select List on Item Type, e.g.
Item_Type is 'HA' then display Select List for hardware_id, do not display and set to NULL the Select Lists for backup_dev_id and hardware_os_id.
Item_Type is 'BB' then display Select List for backup_dev_id, do not display and set to NULL the Select Lists for hardware_id and hardware_os_id.
Item_Type is 'HS' then display Select List for hardware_os_id, do not display and set to NULL the Select Lists backup_dev_id and hardware_id.
There are properties on elements to conditionally display it but how do we reference the values of the SQL query Updateable region? they are not given a page item name?
Also on the Tabular For Elements there is an Edit tick against a report item - however when you go to the Column Attributes there is not a property with which you can control the Edit setting.
What's the best way of implementing this requirement in APEX 3.1?
Thanks.

>
Welcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and update your profile with a real handle instead of "user13515136".
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
I have a multi-row region that displays values and allows entries in a number of fields.Provide exact details of how this has been implemented. (An example on apex.oracle.com is always a good way to do this.)
I should like the fields to be conditional in that they do not permit entry, but still display, if certain conditions apply (e.g. older rows greyed out). Can this be done? Almost anything can be done, often in multiple ways. Which are appropriate may be dependent on a particular implementation, the skills available to implement it, and the effort you're willing to expend on it. Hence it's necessary to provide full details of what you've done so far...

Need help understanding MS SQL Server 2008R2 and Report Builder 3.0 and user access / priviledges.

Having Problems with connections and access. I have spent the last 2 days reading various threads regarding SQL Reporting Services pertaining to access and connections.
First, let me explain what I have done to date.
1) I am using Windows 7 - Home Premium.
2) I downloaded and installed MS SQL Server 2008 R2 Express. This was successful.
3) I downloaded Report Server 3.0 - This was successful.
4) In IE, I tried logging onto http://servername/reports, but this failed. After logging into IE
via ' Run Administrator', I was able to access URL.
Next, I updated the security / trust sites as explained in the
threads
Next, I went to Folder Setting and added my user name and granted all roles (Browser,
Content Manager, My
Reports, Publisher and Report Builder).
5) Now, I can log into Http://servername/reports using my normal windows 7 user account.
6) Next, I opened Report Builder 3.0. However, I am having trouble connecting to report
server. I tried connecting with
http://servername/reports, but this failed.
However, If I change URL to http://servername/reportserver, it works. BUT NOW, I have
another problem. When I
execute the RUN button to create report, I get a permission
error. "PERMISSION GRANTED TO USER ARE
INSUFFICIENT FOR PERFORMING THIS OPERATION".
7) Finally, I can not save reports to http://servername/reportserver when I select "Recent
Site and Servers". ERROR
MESSAGE: UNABLE TO OPEN OR SAVE REPORT
8) In my Reporting Services Configuration Manager:
Web URL = http://servername:80/ReportServer
Report Manager URL = http://servername:80/reports.
What is strange, the Report Manager URL works for IE URL and WEB URL works for
Report Builder connect (Even though it really does not work).
THREE QUESTIONS:
1) What URL should I use to connect in Report Builder.
2) How do I update my normal Windows 7 user so I can run reports when I connect to report
builder.
3) How can I save my reports so they are displayed in IE Reporting services. Note: I was
able to save report to
documents folder and import into IE Reporting Services.
4) And finally, is it possible to add report builder 3.0 as a tab in my IE Reporting Services. I
save seen samples of Reporting Services screens where the instructor has Report Builder
tab.
Thanks
Dan

To answer question 1... it should connect through /ReportServer
http://bretstateham.com/reporting-services-architecture-diagram%E2%80%A6/
Report Builder 3.0 is not a web application, it is a client side application can be used using the click-once or downloaded from Microsoft's website. If you are having issues, you might download and install it and try running it as an administrator.

Reg: Report on GR Returns and IR Returns with PI 2005.1 700

Hi,
   I would like to report on GR Returns and IR retuns from Purchasing Datasources i.e. 2LIS_02_SCL(total returns).
   I created GR with 101 movement and GR with 102 movement. I checked in RSA3, i could see data with Procecs Key 002. But, i don't see any entry with process key 006. <u>Does any body investigated how these process keys attached to document changes? am i missing some thing?</u> I can able to calculate Actual Delived Qty and Invoice Qty, but i could't able to calculate total GR and IR Returns?.
We are on ECC 6.0 and PI 2005.1 700 and BI 7.0 .
Does any body have any idea about this.
Note: as of now i don't want to look into IM for return quantity. we don't have any Plans to implement IM.
Thanks in advance!
Nagesh Ganisetti.

Chetan,
   Both notes won't help... as you didn't understood my Issue. I was able to get actual Delivered or Invoiced Qty or Values. 1st won't help in my Case (This note is for how to calculate Invoice or GR value with Current Exachnge Rate instead of Original Exchange Rate).
I did all the settings for Purchasing. Some reason i couldn't able to generate any Entry with Process Key '6' or '7'.
Any idea where these process keys attached to these Documents. I want to debugg this, as you know i need to debugg while filling setup tables.
I would be very happy if you can share any Document on BI Objects Naming Conventions (Query or Cube or any BI Object).
Nagesh Ganisetti.

In the second leg STO GR and IR created withought doing Goods issue

Hi Guru's
Please can any one tell us user is created second leg STO withought doing good issue and Intercompany invoice, but he has been done GR and IR it is causing problem in MR11 report still outstanding.
i asked user to do GR cancelation or reversal, it is not possible because stocks released to QA. and GR and IR created with ref to PO

Hi,
We can not cancel GRN once it is released form QA or UD is made.

In the second leg STO GR and IR created without doing Goods issue and IV

Hi Guru's
Please can anyone tell us user is created second leg STO without doing good issue and Intercompany invoice, but he has been done GR and IR it is causing problem in MR11 report still outstanding.
i asked user to do GR cancelation or reversal, it is not possible because stocks released to QA. and GR and IR created with ref to PO

Hi,
We can not cancel GRN once it is released form QA or UD is made.

Migration report to move BP and OneOrder texts to def. lang (Note 1155979)

Hello CRM Colleagues,
with the procedure described in SAP Note 1155979 "Other users cannot display an entry in the text field" in SAP CRM 6.0 and higher you can define a default language in table COMC_TEXT_COMLNG that will be used for language-independent text fields. An example for such a field can be found in the details assignment block of Accounts, Contacts, Activities and Opportunities.
We where looking for this option since a long time. But here's our problem:
We use SAP CRM in production since 2005 and started with Version 4.0 using the PC-UI. In 2007 we've upgraded to 5.0 and still used the PC-UI. Now we're in the process of an upgrade to CRM 7.0. Our users use the languages English, German, Italian and Slovenian.
But the note 1155979 talks about a limitation:
"This note does not affect existing documents. To avoid problems, you should make the setting before production startup."
What I'm now looking for is a migration report that will take i.e. the text in language DE and move it to the now defined default language EN. So after running this report our users can also benefit from this change for already existing Accounts, Contacts, Opportunities and Activities.
Has anyone created such a report?
Best regards
Gregor

I've created a development request in the DSAG Net Migrations Report um die Geschäftspartner und OneOrder texte in eine Standardsprache zu verschieben (Hinweis 1155979) . If you're a DSAG Member please support this request.

Issues in Multiprovider Report, based on Purchase and Inventory Infocubes

Dear Gurus,
There are two reports (1. Report gives INVENTORY details and other report is linked to this report which displays PURCHASE data related to material on INV report Using RRI.) , user wants all the INV info along with PR, PO, PDATE, PRECIEPT.... in the same report.
To satisfy the above requirement, a multiprovider is created on the above of PUR, INV Infocubes, with Identify (assign) condition for 0CALDAY, 0MATERIAL, 0MAT_PLANT, 0PLANT. Does anymore Infoobject need to be included for assign condition?
Another Report Template is created to make it out. Time Variable for this Report is in "01.12.2010 - 31.12.2010" format, is this a valid time variable or do I need to create another which considers sys-datum-1.
Issue: I am unable to get the data for the Fields "Cur.Stock","Total Consumptionu201D, u201CAverage Consumptiom","Below from Consumption","CnsStckReceipts " and getting wrong data for "BLW SFTY"....
Your help is much appreciated.

Hi,
Please check the data in the underlying cube and also check teh multiprovder
data by t-code listcube.Make sure you have done the proper identation.
Thanks,
Saveen

SQL Server reporting server 2005 having error. 'The report server is not responding. Verify that report server is running and can be accessed from this computer'

Hi team,
I got below error message in SQL Server 2005 reporting service.
''The report server is not responding. Verify that report server is running and can be accessed from this computer'
also in reports, i am getting below error:
"The encrypted value for the "LogonCred" configuration setting cannot be decrypted. (rsFailedToDecryptConfigInformation)
Get Online Help
The report server has encountered a configuration error. See the report server log files for more information. (rsServerConfigurationError)
Get Online Help "
Please find below log:
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.4060.00</Product>
<Locale>en-US</Locale>
<TimeZone>Eastern Daylight Time</TimeZone>
<Path>F:\Program Files\Microsoft SQL Server\MSSQL.6\Reporting Services\LogFiles\ReportServer__07_28_2014_09_08_41.log</Path>
<SystemName>MFLDDDBS04</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 2</OSName>
<OSVersion>5.2.3790.131072</OSVersion>
</Header>
w3wp!webserver!1!7/28/2014-09:08:41:: i INFO: Reporting Web Server started
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing ConnectionType to '1' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration
file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Reporting Services starting SKU: Enterprise
w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Evaluation copy: 0 days left
w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information., CryptUnprotectData:
Win32 error:13;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. See the report server log files for more information.
   at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.UnprotectData(Byte[] data, Int32 dwFlags, Boolean transitoryData)
   at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.LocalUnprotectData(String data, Boolean transitoryData)
   at Microsoft.ReportingServices.Diagnostics.RSConfiguration.DecryptCatalogData(String encryptedData, String element)
   --- End of inner exception stack trace ---

Hi Vivek,
In Reporting Services, values for LogonUser, LogonDomain, and LogonCred are created when the report server connection is configured to use a domain account. As to the error that “The encrypted value for the "LogonCred" configuration setting cannot be decrypted”,
we can know that it relates to the domain account for report server connection.
To fix this issue, we can refer to the following steps:
Log in to SQL Server Database Engine in SQL Server Management Studio.
Under Security folder, give sufficient permissions for your domain account.
Open your Reporting Services Configuration (go to Start -> All Programs -> Microsoft SQL Server 2005 -> Configuration Tools -> Reporting Services Configuration)
Navigate to the Database Setup tab, select ‘Service Credentials’ as the Credentials Type, then type your domain account and password in there. Press Apply.
Restart the Report Server services.
Reference:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/2d05b404-83aa-4fb2-bba6-52b587e890ec/sql-2005-rs-configuration-tool-encryption-key-error
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Difference between Reporting Services Sharepoint Mode and Reporting Services Add In for Sharepoint 2013

Hi, We are building company site with Sharepoint 2013 Enterprise Edition and were wondering what is the difference between Reporting Services Sharepoint Mode and Reporting Services Add In for Sharepoint 2013? What are the roles/purposes of each one? What
happens if only Reporting Services Sharepoint Mode installed or vise versa.
Thank you in advance

Reporting Services in SharePoint mode is a service for displaying, managing, and creating SSRS reports within SharePoint. The addin is a pre-req for SharePoint that is used to display reports and is required for Reporting Services in Native or SharePoint
mode, but does not by itself do anything.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Report on PO No. and PO Creater

Similar Messages

Maybe you are looking for