Report on PO status

is there any report / transaction which is used to monitor PO status
thank you

hi,
you can use the ME2N etc transaction and use the dynamic selection shift + F4 for selecting the field and then execute...system will show all the doc with the given status....
and can also make use of selection parameter if req..
or
Create an SQVI query and use the table EKKO/EKPO and check the status....
Regards
Priyanka.P

Similar Messages

  • ISE 1.2 - Posture Detail Assessment - enforcement audit mode report not show status for non-compliant

    ISE 1.2 - Posture Detail Assessment - enforcement audit mode report not show status for non-compliant.
    - For old version 1.1.4 it can be reported for non-compliant, How can I generate report for this? 
    Thanks
    Kosin Usuwanthim

    It used to be in there (id 226635 is the last one with it); should I clean it up a bit and put it back with a bit more of a disclaimer?

  • Report for PO status

    Hello Experts ,
    Can you tell me the standard report for the status of PO as in GR qty , value , in voiced qty & value etc & open qty & value ??
    Regards

    hi,
    There is no direct report, but for a single material you can check the PO history from ME2N etc reports...
    After executing the report there is the PO history tab...in it can see it individually...
    But from the table you can see collectively...
    Hope it helps..
    Regards
    Priyanka.P

  • CJE0 - Reports to be able to report on 'system status'

    Hi there,
    Is there already an ability in CJE0 reports, or other reports, to be able to report on 'system status' (Project status) in the dynamic selections by another name?  If not can we get it added as a field choice in the dynamic selections list?
    Thank you,
    Barbara

    Hi,
    This thread will help you.
    /message/5463977#5463977 [original link is broken]
    Regards

  • PC - Generating a 'Dashboard' report on the status of the controls already planned for the 1st quarter of 2014, shows the control with status Submitted.

    Hi;
        I have a problem in GRC-PC I can't solve. My User is generating a 'Dashboard' report on the status of planned for the 1st quarter of 2014 (compliance controls), this controls not planned, but presented the control with status Submitted.
    I appreciate any help...
    Thanks all....
    Regards....

    kaeandcolesmon,
    If you open the recovery drive (partition) it should only have a single folder (Recovery).
    To make sure that your not saving restore points to that drive.
    See:
    Start, Control Panel, System, System Protection tab. Make sure the D drive partition is set to OFF so that it does not save there.
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • Need a report on delivery status and response status for capaign recipients

    hi, i need to make a report on delivery status and response status for capaign recipients but cannot find them in the campaign subject area nor the campaign response subject area, any idea?
    thanks

    Correct the Campaign Response History is the report you are looking for. The fields that may be helpful to you are.
    Response status - This shows message opened, click-thru's, opt outs etc
    Delivery status - Hard bounce, soft bounce etc
    To get more details from the above results add the following.
    Response type - This will show the URL that was clicked on a click-thru in case you have multiple links tracked in one email. It will also show the reason for hard bounces. This is important because not all hard bounces will trigger the "Never Email" flag to be checked. This occurs for emails with the bounce statuses of Bad Address,
    Address Moved or Unknown Address only.

  • I want to use spiceworks to report on the status of bitlocker across multiple

    I want to use spiceworks to report on the status of bitlocker across multiple customer sites and domains, I didn't want to use MBAM as it is complicated and I just wanted to report if bitlocker was enabled or not.
    There have been a lot of discussions but I was looking for some thoughts and experiences that were concise on the whole process ie how to implement spiceworks across multiple sites, and then into the reporting. Or is that too much to ask in one discussion?
    Thanks!
    This topic first appeared in the Spiceworks Community

    If you are talking abount the ID is Settings>iCloud you will have to get the persions to give you the ID andpassword or get them to remove the iPod from their account
    Find My iPhone Activation Lock: Removing a device from a previous owner’s account
    also see:
    iCloud: Find My iPhone Activation Lock in iOS 7

  • SPA112 / SPA122 Report Rule - Delta / Status outputs

    Hi,
    I've been playing with the Report Rule and the documentation is not very clear when it comes to the two report options: --delta and --status
    If I set the Report Rule to [--status]http://myserver/posthandler.php, I see the request coming in but the content of the POST is the actual config file (flat-profile) instead of the status (flat-status). Same goes when using the --delta
    I am using 1.3.1 to test but I am sure 1.3.2 is probably not working as well.
    Have anyone ever been able to generate a delta and/or get the content of the ATA status.xml file? I can get it from the URL (http://my_ata_ip/admin/status.xml) but would be neat to get it remotely too.
    Thanks,
    Benoit

    I assume you are following Cisco SPA112, SPA122, SPA232D Analog Telephone Adapters Provisioning Guide
    I see no --status nor --delta modifiers mentioned in Report_Rule option description. Just --key modifier is described here.
    It seems that neither --status nor --delta modifiers are supported on SPA1[12]2.
    As far as I know, status and delta reports are supported on SPA IP Phones (e.g. SPA[35]xx) only.  The --delta is supported from 7.4.9c firmware onward, the --status has been introduced with 7.5.3 version. See Cisco Small Business IP Telephony Provisioning Guide for more information related to provisioning of this product line devices..
    Rate useful responses. It will help others to found solutions.

  • Reporting Services Point status message errors.

    My Reporting Services Point seems to work OK -all reports are available and run correctly both through the console and via the website. However, I am seeing the following warning in the SMS_SRS_REPORTING_POINT status messages every hour:
    "The SQL Reporting Services datasource on Reporting point server "Databaseserver.contoso.com" is missing or has been changed outside of Configuration Manager.  It will be rebuilt based on the RSP configuration."
    Here's what I think is causing the issue, but I don't know how to solve it.
    The reports database is on the same remote SQL server as my site database. Because these site systems were installed automatically through the SCCM installation process, they show up in the Servers and Site Systems Role without an intranet FQDN. However,
    when I add the RSP to the database server, it creates a new entry because when manually adding site systems SCCM insists on automatically adding the intranet FQDN. So I now have two separate entries for the same server:
    \\DBServer01 - component server, site database server, site system
    \\DBServer01.contoso.com - component server, reporting services point, site system
    Any thoughts on how to stop these errors?

    Yes, I know this is an old post, but I’m trying to clean them up.
    In the past when I have seen this, they will automatically clean themselves up after a few days. (aka up to a week later). Have it clean itself up yet?
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Does anyone have a daily report for system status?

    Basically, I am looking for an automated daily report to give me the status of jobs and workflows.  I am having a hard time finding the talbes and relationships for all the jobs, workflows, and tasks in the CMDB.
    Once I know where to find all the pieces, I can take it from there.

    Sounds like a job for OpsMgr. 
    - Get on the floor, do that dinosaur

  • XL Report for stock status

    I am trying to create a stock status report that shows all items grouped by item group, their quantity on hand, item cost, and total value.  We need to have a subtotal by item group.  I thought that XL Reporter would do this easily, but I am having difficulty.
    In the Report Composer, I can create the listing of items with descriptions, quantities, and item costs, grouped by item group.  Of course, I cannot perform the calculation to get the value of each item (quantity * cost).  When I generate the report into the Report Designer, there are no errors and the design appears to be created OK.  But when I run the report, the spreadsheet comes up completely blank except for column headers.
    Can anyone tell me what the problem is?

    XL reporter is based on the concepts of Dimensions, Light Dimensions and Measures.
    >> partial extract from XL Reporter FAQ.
    28. When I create a query within the Report Composer that uses the dimension called GL Accounts and add the attribute Account Name then refresh the query it produces data as expected. However when the query is executed in Excel it does not produce any data. What am I doing wrong?
    The query only contains dimensions and not measures. It is not possible to generate data with a query that does not contain a measure field type within Excel. Excel and the composer pick up data in different ways, therefore it is possible you will see data in the composer, however in excel you will not. Until a measure is added no data is produced.
    Do check the URL for complete XL reporter FAQ: Check FAQ No.28
    https://websmp107.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_HIER_KEY=701100035871000371280&_OBJECT=011000358700001325372005E&_SCENARIO=01100035870000000183&
    For further information, check the following URL:
    https://websmp107.sap-ag.de/~sapidb/011000358700003984512006E.pdf
    You can check the following URL to understand : Creating a Profit & Loss Report Using XL Reporter
    https://websmp107.sap-ag.de/~sapidb/011000358700001160462006E.pdf
    Hope this information helps in providing solution to your actual requirement.
    Regards
    Satish

  • Report on Daily Status Of Process Chains

    Hi all,
    I need a report on process chain where daily i can check the status of the Chains executed, failed, logs, start time, end time, log ID, Job Type, Run Time, Last Update ( User name ), Duration, Source System.
    Is there any Standard Report on this, if not how can i achieve this.
    If yes whats the report name.
    Regards,
    av.

    Hi fresher BW,
    U can put ur Process chain in <b>RSPCM</b> (Monitor the process chain) & give ur mail id & give an Interface it will give daily report on that process cahin ( IF u schdule that process Chain Daily).
    Go to RSPCM.
    Click on Add chain( It is just like create button) select ur process cahin which u want to get details daily.
    Thanks,
    kiran.

  • One report to check status of project/wbs(TECO/REL)+ available budget

    Dear All,
    Please advice. Is there any report (one for all ) which can show Status of project/wbs + available budget of a project. I tried cns43, cn41 and report s_alr. But it shows in different tcode/report. Hopefully there is a standard report that can show these in one report.
    Many thanks in advance.
    Nies

    CN41 shows the Current Budget and not Original Budget.
    If Available Budget in your terms means difference between Current Budget and Actual, you can include a column 'Difference' from menu.
    Select the Column Budget 1st, Menu Edit>Comparison> Choose Actual Cost.
    The output shows the difference and percentage. Problem now is you can't view the status.I can't think of anything standard which exactly gives the ouput columns you are expecting.
    Regards
    Sreenivas

  • Reports Queue Manager - Status Information

    Hi there,
    I would like to know if you can get status information from the reports queue manager.
    For your information: We are still using Forms/Reports 6i but looking forward to use 10g via web frontend.
    1.) In detail I would like to control the 'number of jobs'. Our frontend (RWRQM60.EXE) only shows the first 990 (up to 1.000) entries, via 'queue => properties' I can see the total number of jobs.
    Is there a way to get the number of jobs via SQL or by another programmatically way (we prefer .NET)?
    2.) The reason why I need this information is because of a limit of 9999 reports in queue manager. After this amount of reports the report server raises a 'REP-0177: Error while running in remote server' and the 10.000 job will NOT be send to the queue!
    Is there a way to expand the number from 9.999 jobs to more .. for example 30.000 jobs?
    Thanks for your help ..
    Michael

    Currently no, not easily. we intend to fix this for Reports 7.0.
    Regards
    The Oracle Reports Team http://technet.oracle.com

  • SCCM 2012 monitoring - Site Status - Reporting Services Point - Status Critical

    Hi all,
    I have noticed that the Site Status under Monitoring shows Reporting services point as in Critical state though we do not see anything wrong with SCCM as such (at least we haven't been reported any problems thus far). There is nothing in the event viewer
    on SQL Server. Just wanted to know how to resolve this issue. Could you help?
    When I try to open status messages for Reporting Services (for any days) it does not return anything as if there are no status messages for this role. Also, could you let me know the log file locations/names for Reporting services point?

    Here it is... I have replaced server names with a dummy name.
    =================
    Reporting Services URL from Registry [http://SCCMSQLSERVER/ReportServer/ReportService2005.asmx]~  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:23:31.588-60><thread=6072 (0x17B8)>
    Reporting Services is running  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:23:31.596-60><thread=6072 (0x17B8)>
    Retrieved datasource definition from the server.  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:23:31.616-60><thread=6072 (0x17B8)>
    Confirmed version [10.50.4000.0] for the Sql Srs Instance.  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:23:31.641-60><thread=6072 (0x17B8)>
    Retrieved datasource definition from the server.  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:23:31.686-60><thread=6072 (0x17B8)>
    Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ConfigMgr_PRI  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:23:31.686-60><thread=6072 (0x17B8)>
    Loading localization resources from directory [F:\SMS_SRSRP\SrsResources.dll]   $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:23:31.713-60><thread=6072 (0x17B8)>
    Looking for 'English (United Kingdom)' resources  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:23:31.715-60><thread=6072 (0x17B8)>
    Looking for 'English' resources  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:23:31.716-60><thread=6072 (0x17B8)>
    Found resources for 'English'  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:23:31.716-60><thread=6072 (0x17B8)>
    Next security configuration at [02/09/2014 13:31:30]  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:23:32.338-60><thread=6072 (0x17B8)>
    Root Folder exists  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:23:32.338-60><thread=6072 (0x17B8)>
    Successfully checked that the SRS web service is healthy on server SCCMSQLSERVER.DOMAIN~  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:23:32.338-60><thread=6072 (0x17B8)>
    ~Waiting for changes for 1 minutes  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:23:32.339-60><thread=6072 (0x17B8)>
    Timed Out...~  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:24:32.336-60><thread=6072 (0x17B8)>
    Reporting Services URL from Registry [http://SCCMSQLSERVER/ReportServer/ReportService2005.asmx]~  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:24:32.347-60><thread=6072 (0x17B8)>
    Reporting Services is running  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:24:32.357-60><thread=6072 (0x17B8)>
    Retrieved datasource definition from the server.  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:24:32.377-60><thread=6072 (0x17B8)>
    Confirmed version [10.50.4000.0] for the Sql Srs Instance.  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:24:32.404-60><thread=6072 (0x17B8)>
    Retrieved datasource definition from the server.  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:24:32.451-60><thread=6072 (0x17B8)>
    Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ConfigMgr_PRI  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:24:32.451-60><thread=6072 (0x17B8)>
    Loading localization resources from directory [F:\SMS_SRSRP\SrsResources.dll]   $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:24:32.478-60><thread=6072 (0x17B8)>
    Looking for 'English (United Kingdom)' resources  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:24:32.480-60><thread=6072 (0x17B8)>
    Looking for 'English' resources  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:24:32.481-60><thread=6072 (0x17B8)>
    Found resources for 'English'  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:24:32.481-60><thread=6072 (0x17B8)>
    Next security configuration at [02/09/2014 13:31:30]  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:24:33.160-60><thread=6072 (0x17B8)>
    Root Folder exists  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:24:33.161-60><thread=6072 (0x17B8)>
    Successfully checked that the SRS web service is healthy on server SCCMSQLSERVER.DOMAIN~  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:24:33.161-60><thread=6072 (0x17B8)>
    ~Waiting for changes for 1 minutes  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:24:33.161-60><thread=6072 (0x17B8)>
    Timed Out...~  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:25:33.159-60><thread=6072 (0x17B8)>
    Reporting Services URL from Registry [http://SCCMSQLSERVER/ReportServer/ReportService2005.asmx]~  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:25:33.168-60><thread=6072 (0x17B8)>
    Reporting Services is running  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:25:33.188-60><thread=6072 (0x17B8)>
    Retrieved datasource definition from the server.  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:25:33.237-60><thread=6072 (0x17B8)>
    Confirmed version [10.50.4000.0] for the Sql Srs Instance.  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:25:33.264-60><thread=6072 (0x17B8)>
    Retrieved datasource definition from the server.  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:25:33.462-60><thread=6072 (0x17B8)>
    Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ConfigMgr_PRI  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:25:33.462-60><thread=6072 (0x17B8)>
    Loading localization resources from directory [F:\SMS_SRSRP\SrsResources.dll]   $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:25:33.539-60><thread=6072 (0x17B8)>
    Looking for 'English (United Kingdom)' resources  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:25:33.541-60><thread=6072 (0x17B8)>
    Looking for 'English' resources  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:25:33.542-60><thread=6072 (0x17B8)>
    Found resources for 'English'  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:25:33.542-60><thread=6072 (0x17B8)>
    Next security configuration at [02/09/2014 13:31:30]  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:25:34.796-60><thread=6072 (0x17B8)>
    Root Folder exists  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:25:34.797-60><thread=6072 (0x17B8)>
    Successfully checked that the SRS web service is healthy on server SCCMSQLSERVER.DOMAIN~  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:25:34.797-60><thread=6072 (0x17B8)>
    ~Waiting for changes for 1 minutes  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:25:34.797-60><thread=6072 (0x17B8)>
    Timed Out...~  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:26:34.795-60><thread=6072 (0x17B8)>
    Reporting Services URL from Registry [http://SCCMSQLSERVER/ReportServer/ReportService2005.asmx]~  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:26:34.804-60><thread=6072 (0x17B8)>
    Reporting Services is running  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:26:34.813-60><thread=6072 (0x17B8)>
    Retrieved datasource definition from the server.  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:26:34.834-60><thread=6072 (0x17B8)>
    Confirmed version [10.50.4000.0] for the Sql Srs Instance.  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:26:34.859-60><thread=6072 (0x17B8)>
    Retrieved datasource definition from the server.  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:26:34.904-60><thread=6072 (0x17B8)>
    Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ConfigMgr_PRI  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:26:34.905-60><thread=6072 (0x17B8)>
    Loading localization resources from directory [F:\SMS_SRSRP\SrsResources.dll]   $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:26:34.940-60><thread=6072 (0x17B8)>
    Looking for 'English (United Kingdom)' resources  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:26:34.942-60><thread=6072 (0x17B8)>
    Looking for 'English' resources  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:26:34.943-60><thread=6072 (0x17B8)>
    Found resources for 'English'  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:26:34.943-60><thread=6072 (0x17B8)>
    Next security configuration at [02/09/2014 13:31:30]  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:26:35.724-60><thread=6072 (0x17B8)>
    Root Folder exists  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:26:35.725-60><thread=6072 (0x17B8)>
    Successfully checked that the SRS web service is healthy on server SCCMSQLSERVER.DOMAIN~  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:26:35.725-60><thread=6072 (0x17B8)>
    ~Waiting for changes for 1 minutes  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:26:35.726-60><thread=6072 (0x17B8)>
    Timed Out...~  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:27:35.723-60><thread=6072 (0x17B8)>
    Reporting Services URL from Registry [http://SCCMSQLSERVER/ReportServer/ReportService2005.asmx]~  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:27:35.731-60><thread=6072 (0x17B8)>
    Reporting Services is running  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:27:35.752-60><thread=6072 (0x17B8)>
    Retrieved datasource definition from the server.  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:27:35.776-60><thread=6072 (0x17B8)>
    Confirmed version [10.50.4000.0] for the Sql Srs Instance.  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:27:35.813-60><thread=6072 (0x17B8)>
    Retrieved datasource definition from the server.  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:27:35.902-60><thread=6072 (0x17B8)>
    Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ConfigMgr_PRI  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:27:35.902-60><thread=6072 (0x17B8)>
    Loading localization resources from directory [F:\SMS_SRSRP\SrsResources.dll]   $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:27:35.954-60><thread=6072 (0x17B8)>
    Looking for 'English (United Kingdom)' resources  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:27:35.956-60><thread=6072 (0x17B8)>
    Looking for 'English' resources  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:27:35.957-60><thread=6072 (0x17B8)>
    Found resources for 'English'  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:27:35.957-60><thread=6072 (0x17B8)>
    Next security configuration at [02/09/2014 13:31:30]  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:27:36.728-60><thread=6072 (0x17B8)>
    Root Folder exists  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:27:36.729-60><thread=6072 (0x17B8)>
    Successfully checked that the SRS web service is healthy on server SCCMSQLSERVER.DOMAIN~  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:27:36.729-60><thread=6072 (0x17B8)>
    ~Waiting for changes for 1 minutes  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:27:36.730-60><thread=6072 (0x17B8)>
    Timed Out...~  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:28:36.727-60><thread=6072 (0x17B8)>
    Reporting Services URL from Registry [http://SCCMSQLSERVER/ReportServer/ReportService2005.asmx]~  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:28:36.738-60><thread=6072 (0x17B8)>
    Reporting Services is running  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:28:36.747-60><thread=6072 (0x17B8)>
    Retrieved datasource definition from the server.  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:28:36.769-60><thread=6072 (0x17B8)>
    Confirmed version [10.50.4000.0] for the Sql Srs Instance.  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:28:36.799-60><thread=6072 (0x17B8)>
    Retrieved datasource definition from the server.  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:28:36.848-60><thread=6072 (0x17B8)>
    Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ConfigMgr_PRI  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:28:36.848-60><thread=6072 (0x17B8)>
    Loading localization resources from directory [F:\SMS_SRSRP\SrsResources.dll]   $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:28:36.875-60><thread=6072 (0x17B8)>
    Looking for 'English (United Kingdom)' resources  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:28:36.878-60><thread=6072 (0x17B8)>
    Looking for 'English' resources  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:28:36.878-60><thread=6072 (0x17B8)>
    Found resources for 'English'  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:28:36.878-60><thread=6072 (0x17B8)>
    Next security configuration at [02/09/2014 13:31:30]  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:28:37.496-60><thread=6072 (0x17B8)>
    Root Folder exists  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:28:37.497-60><thread=6072 (0x17B8)>
    Successfully checked that the SRS web service is healthy on server SCCMSQLSERVER.DOMAIN~  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:28:37.497-60><thread=6072 (0x17B8)>
    ~Waiting for changes for 1 minutes  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:28:37.497-60><thread=6072 (0x17B8)>
    Timed Out...~  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:29:37.494-60><thread=6072 (0x17B8)>
    Reporting Services URL from Registry [http://SCCMSQLSERVER/ReportServer/ReportService2005.asmx]~  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:29:37.503-60><thread=6072 (0x17B8)>
    Reporting Services is running  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:29:37.512-60><thread=6072 (0x17B8)>
    Retrieved datasource definition from the server.  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:29:37.534-60><thread=6072 (0x17B8)>
    Confirmed version [10.50.4000.0] for the Sql Srs Instance.  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:29:37.563-60><thread=6072 (0x17B8)>
    Retrieved datasource definition from the server.  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:29:37.610-60><thread=6072 (0x17B8)>
    Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ConfigMgr_PRI  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:29:37.610-60><thread=6072 (0x17B8)>
    Loading localization resources from directory [F:\SMS_SRSRP\SrsResources.dll]   $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:29:37.646-60><thread=6072 (0x17B8)>
    Looking for 'English (United Kingdom)' resources  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:29:37.648-60><thread=6072 (0x17B8)>
    Looking for 'English' resources  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:29:37.653-60><thread=6072 (0x17B8)>
    Found resources for 'English'  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:29:37.654-60><thread=6072 (0x17B8)>
    Next security configuration at [02/09/2014 13:31:30]  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:29:38.352-60><thread=6072 (0x17B8)>
    Root Folder exists  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:29:38.353-60><thread=6072 (0x17B8)>
    Successfully checked that the SRS web service is healthy on server SCCMSQLSERVER.DOMAIN~  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:29:38.353-60><thread=6072 (0x17B8)>
    ~Waiting for changes for 1 minutes  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:29:38.353-60><thread=6072 (0x17B8)>
    Timed Out...~  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:30:38.351-60><thread=6072 (0x17B8)>
    Reporting Services URL from Registry [http://SCCMSQLSERVER/ReportServer/ReportService2005.asmx]~  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:30:38.361-60><thread=6072 (0x17B8)>
    Reporting Services is running  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:30:38.370-60><thread=6072 (0x17B8)>
    Retrieved datasource definition from the server.  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:30:38.393-60><thread=6072 (0x17B8)>
    Confirmed version [10.50.4000.0] for the Sql Srs Instance.  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:30:38.432-60><thread=6072 (0x17B8)>
    Retrieved datasource definition from the server.  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:30:38.484-60><thread=6072 (0x17B8)>
    Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ConfigMgr_PRI  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:30:38.485-60><thread=6072 (0x17B8)>
    Loading localization resources from directory [F:\SMS_SRSRP\SrsResources.dll]   $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:30:38.520-60><thread=6072 (0x17B8)>
    Looking for 'English (United Kingdom)' resources  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:30:38.522-60><thread=6072 (0x17B8)>
    Looking for 'English' resources  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:30:38.530-60><thread=6072 (0x17B8)>
    Found resources for 'English'  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:30:38.531-60><thread=6072 (0x17B8)>
    Next security configuration at [02/09/2014 13:31:30]  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:30:39.270-60><thread=6072 (0x17B8)>
    Root Folder exists  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:30:39.270-60><thread=6072 (0x17B8)>
    Successfully checked that the SRS web service is healthy on server SCCMSQLSERVER.DOMAIN~  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:30:39.271-60><thread=6072 (0x17B8)>
    ~Waiting for changes for 1 minutes  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:30:39.271-60><thread=6072 (0x17B8)>
    Timed Out...~  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:39.268-60><thread=6072 (0x17B8)>
    Reporting Services URL from Registry [http://SCCMSQLSERVER/ReportServer/ReportService2005.asmx]~  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:39.277-60><thread=6072 (0x17B8)>
    Reporting Services is running  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:39.286-60><thread=6072 (0x17B8)>
    Retrieved datasource definition from the server.  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:39.308-60><thread=6072 (0x17B8)>
    Confirmed version [10.50.4000.0] for the Sql Srs Instance.  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:39.334-60><thread=6072 (0x17B8)>
    Retrieved datasource definition from the server.  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:39.380-60><thread=6072 (0x17B8)>
    Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ConfigMgr_PRI  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:39.381-60><thread=6072 (0x17B8)>
    Loading localization resources from directory [F:\SMS_SRSRP\SrsResources.dll]   $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:39.421-60><thread=6072 (0x17B8)>
    Looking for 'English (United Kingdom)' resources  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:39.423-60><thread=6072 (0x17B8)>
    Looking for 'English' resources  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:39.424-60><thread=6072 (0x17B8)>
    Found resources for 'English'  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:39.424-60><thread=6072 (0x17B8)>
    Confirmed the configuration of SRS role [ConfigMgr Report Users].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:40.088-60><thread=6072 (0x17B8)>
    Confirmed the configuration of SRS role [ConfigMgr Report Administrators].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:40.098-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:40.700-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:40.736-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Asset Intelligence].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:40.758-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Compliance and Settings Management].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:40.791-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Administrative Security].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:40.815-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Operating System].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:40.849-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Software Updates - A Compliance].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:40.870-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Software Updates - B Deployment Management].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:40.906-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Software Updates - C Deployment States].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:40.929-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Software Updates - D Scan].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:40.961-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Software Updates - E Troubleshooting].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:40.998-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Driver Management].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.033-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Task Sequence - Deployment Status].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.067-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Task Sequence - Deployments].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.099-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Task Sequence - Progress].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.127-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Task Sequence - References].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.155-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/State Migration].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.192-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Software Distribution - Application Monitoring].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.221-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Virtual Applications].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.265-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Software Distribution - Package and Program Deployment Status].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.303-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Software Distribution - Package and Program Deployment].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.326-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/User - Device Affinity].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.362-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Software Metering].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.381-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Status Messages].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.413-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Migration].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.432-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Device Management].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.470-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Status Messages - Audit].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.495-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Alerts].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.529-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Client Status].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.551-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Client Push].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.585-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - CD-ROM].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.609-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - Disk].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.642-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - General].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.666-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - Memory].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.700-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - Modem].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.724-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - Network Adapter].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.755-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - Processor].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.778-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - SCSI].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.815-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - Sound Card].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.835-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - Video Card].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.867-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Site - Client Information].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.888-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Site - Discovery and Inventory Information].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.924-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Site - General].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.952-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Site - Server Information].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.985-60><thread=6072 (0x17B8)>
    The security policy for folder [/ConfigMgr_PRI/Network Access Protection] is out of sync.  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.007-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Network Access Protection].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.042-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Power Management].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.073-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Wake On LAN].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.096-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Network].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.132-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Software - Files].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.156-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Software - Companies and Products].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.189-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Users].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.209-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Software Distribution - Collections].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.243-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Software Distribution - Content].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.268-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Out Of Band Management].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.298-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Endpoint Protection].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.320-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Status Messages/Status Messages - Hidden].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.349-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Endpoint Protection/Endpoint Protection - Hidden].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.367-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Software Distribution - Application Monitoring/Software Distribution - Application Monitoring - Hidden].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.397-60><thread=6072 (0x17B8)>
    The security policy for folder [/ConfigMgr_PRI/Network Access Protection] is out of sync.  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.418-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Network Access Protection].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.458-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Replication Traffic].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.492-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Upgrade Assessment].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.511-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/User Data and Profiles Health].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.542-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.571-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.599-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Asset Intelligence].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.632-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Compliance and Settings Management].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.656-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Administrative Security].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.689-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Operating System].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.709-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Software Updates - A Compliance].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.742-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Software Updates - B Deployment Management].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.767-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Software Updates - C Deployment States].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.800-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Software Updates - D Scan].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.822-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Software Updates - E Troubleshooting].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.856-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Driver Management].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.880-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Task Sequence - Deployment Status].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.911-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Task Sequence - Deployments].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.932-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Task Sequence - Progress].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.966-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Task Sequence - References].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.988-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/State Migration].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.020-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Software Distribution - Application Monitoring].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.045-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Virtual Applications].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.078-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Software Distribution - Package and Program Deployment Status].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.113-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Software Distribution - Package and Program Deployment].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.137-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/User - Device Affinity].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.170-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Software Metering].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.193-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Status Messages].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.227-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Migration].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.247-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Device Management].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.280-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Status Messages - Audit].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.306-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Alerts].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.339-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Client Status].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.361-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Client Push].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.395-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - CD-ROM].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.415-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - Disk].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.445-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - General].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.467-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - Memory].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.497-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - Modem].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.518-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - Network Adapter].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.550-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - Processor].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.570-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - SCSI].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.602-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - Sound Card].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.625-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - Video Card].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.655-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Site - Client Information].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.676-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Site - Discovery and Inventory Information].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.710-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Site - General].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.731-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Site - Server Information].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.762-60><thread=6072 (0x17B8)>
    The security policy for folder [/ConfigMgr_PRI/Network Access Protection] is out of sync.  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.785-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Network Access Protection].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.821-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Power Management].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.852-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Wake On LAN].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.878-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Network].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.899-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Software - Files].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.933-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Software - Companies and Products].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.967-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Users].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.994-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Software Distribution - Collections].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:44.027-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Software Distribution - Content].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:44.052-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Out Of Band Management].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:44.084-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Endpoint Protection].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:44.106-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Status Messages/Status Messages - Hidden].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:44.135-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Endpoint Protection/Endpoint Protection - Hidden].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:44.153-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Software Distribution - Application Monitoring/Software Distribution - Application Monitoring - Hidden].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:44.186-60><thread=6072 (0x17B8)>
    The security policy for folder [/ConfigMgr_PRI/Network Access Protection] is out of sync.  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:44.209-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Network Access Protection].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:44.250-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Replication Traffic].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:44.284-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/Upgrade Assessment].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:44.304-60><thread=6072 (0x17B8)>
    Confirmed the security policy for folder [/ConfigMgr_PRI/User Data and Profiles Health].  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:44.338-60><thread=6072 (0x17B8)>
    Root Folder exists  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:44.339-60><thread=6072 (0x17B8)>
    Successfully checked that the SRS web service is healthy on server SCCMSQLSERVER.DOMAIN~  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:44.339-60><thread=6072 (0x17B8)>
    ~Waiting for changes for 1 minutes  $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:44.339-60><thread=6072 (0x17B8)>

Maybe you are looking for

  • Faded-Out / Trimmed DDL's Selected Text  in Adobe Reader X(10)

    Hi folks, My PDF form look good in all the preceding versions of Adobe Reader, but after upgrading to Adobe Reader X(10), the drop-down list box's selected text is getting faded-out/trimmed from it's right-side as you can see in the enclosed image. B

  • C3-01 Swipe to Unlock kill the Alarm!

    hi 1-When I set an alarm , in alarm time , when I swipe to unlock , the alarm stopped , It just stopped. it didn't even snooz. after I wake up I swipe to unlock and enter the lock code and toch the alarm and then it shows , snooz in -- times. The ala

  • Drilldown on row defined as a structure

    Would it be possible to put the char Cost centers at the Free characteristic section and drilldown to the row to see the list of Cost centers for a structure?

  • Podcast not updating from RSS into iTunes

    Hi, I am having a problem with iTunes not updating the most recent iteration of the XML file. URL for the file: http://strategiccoach.com/promotions/teamsuccess/team-success-rss.xml Episodes 1-7 appear in iTunes, but any newer podcasts are not being

  • How can I change the speed of slides for each song on the custom list?

    Hello - I am working on an anniversary slideshow in iphoto on my Mac.  It contains 145 photos.  I have a custom playlist of two songs.  I want to adjust the speed of the slideshow in the beginning to be slower because the song is slower.  Then I want