Report on PR's released

Experts,
Is there a standard report/ or an easy way for me to get the list of all PR's released in an year - Basically I am looking for the following info:
u2022     Requisition Number
u2022     Date
u2022     Amount
u2022     Description
u2022     Requestor (Last Name, First Name)
u2022     Requestor Title
u2022     Approver (Last Name, First Name)
u2022     Approver Title
u2022     Co Code
u2022     Cost Center
Thanks,

Hi,
Use Report ME5A with input Scope of List ALV.
then choose the layout with fields as per your requirement.
Harish

Similar Messages

Using SQVI to generate report of open and released delivery schedule lines

All,
I'm using SQVI to generate an excel spreadsheet for some buyers to show open released schedule lines because they are a 1 line item per scheduling agreement company.
I used the logical database MEPOLDB instead of a table joint and pulled fields from EKKO(vendor, SA #,&purchasing group), EKPO(Material Number), EKEH(schedule line type), and EKET(delivery date, scheduled qty,previous qty).
Does this sound like I'll get the results I want on paper as long as I use the right selection criteria, because the report I'm getting isn't quite what I expect? I am unable to identify which lines are authorized to ship vs. trade-off zone, planning, etc. in the report thus far.

Hi Mark,
I have faced same requirement. I am not sure about transporting to TST and PROD. I done by this way.
After generating SQVI program in DEV , I assigned that program to a transaction and tested in DEV. Later i have regenarated SQVI in Production. then I assigned the generated Program to same transaction in DEV. And transported the Tcode assignment of program to Production..
About authorization , if its not sensitive report, BASIS can restrict at transaction level.
Regards,
Ravi.

Report for POs pending Release (approval) and POs overdue (past deliv date)

Hi All,
In ME2N - std report for POs. How do I set the selection critieria in order to get the following information
1. POs pending Approval (subject to Release Strategy)
2. POs pending delivery from Vendor where the delivery date requested in the POs is past. (How does Selection parameter WE101 help in this report.? How to show how many days past requested delivery date in the PO?)
Thanks in advance

Dear,
1. POs pending Approval (subject to Release Strategy) : -
Enter ME2N, select Dynamic Selection.
Here click on Purchasing Document Header,
Double click on Release Indicator field and assign "X" ,
Then souble click on Subject to release and also give "Yes" indicator then click on execute you get list of purchase order which is unrelease.
2) POs pending delivery from Vendor: -
Enter ME2N, Select selection parameter WE101,
Here you can find list of pending purchase order, You can see document date or delivery date from change layout to find out how it is past.
Regards,
Mahesh Wagh

Report with information about release documents in VKM1

Hello
I need to know if exists some report that gives me more information about release documents in transaction VKM1. What user releases some document? How many documents a credit account had been release or block in a year or between dates?
The transaction VKM2 just gives the release date of the document and not the user.
Where I can find more information?
Regards
Daniel Teles

Hi,
There is a field to know which account is the parent account, but you can't have others informations from the parent account except the name. In the new R16, you have others field called "Parent Account external unique ID" and "Parent Integration ID". What can I do with this field? Is it possible to display the parent account phone field in the report?
regards

Report from Purchase Requisition Release to creation of PO

Hello everyone,
I have a question.
We at our company use Purchase Release strategy.
we release a purchase requisition from transaction me54n and after that a team picks the requisition up in ME57 and make a PO from there.
My question is there a SAP report that shows data from the date the requisition was released until the Purchase Order was made?
Thank you all for your help

Hi
I don't think so you will get date iwse report but you can try this..
Go in ME5A report and there give status B-(Po create) and execute report you will get PR list for which Po is created in system
Regards
Kailas Ugale

Standard SAP Report - Payments blocked and released

Hi Experts,
We are having a requirement where the payment will be blocked for the invoices generated through Invoicing Plan.
But we need a report " To know the status of payments blocked and released according to the invoicing plan". Do we have any standard SAP report on this requirement?
By
Prabhu

Hi,
Use t.code: FBL1N , enter company code & select document type "KZ" in dynamic selection
and then select & execute for....
1.Open Items in status segment for not paid to vendor
2.Cleared Items in status segment for paid to vendor
Regards,
Biju K

Early watch report: Update of Frontend Release recommended

Anybody knows what file/object that is checked for the correct release in BI frontend check in the Earlywatch report ?
We are running GUI 7.10 on the PC´s checked but still the report says something like:
PC Name Current Frontend Rel. Current Front. Patc Recommended Front. Rel. Recom. Frontend Patch
XXX 3.50 11 7.00 16

Hi, Did you find something related with this issue? I got the same message every week.

Upgrading from CRYSTAL REPORTS XI TO X1 RELEASE 2

Post Author: speed_champ
CA Forum: Migration to XI R2
Hi there
We have crystal reports XI running on our production server. We have now our application converted to Visual Studio 2005 and in order to use crystal reports with Visual Studio 2005 we need to upgrade to crystal reports Release 2 version.
If we decide to update with Release 2 version , should the production servers need also be updated ? Or when the application built in VS 2005 is deployed to production will deploy the Release 2 version crystal dlls to the server which already has Crystal Reports XI.
Any information will be advisable.
Thanks again
speed champ

Post Author: rodneyaz
CA Forum: .NET
I'm having the same issue. Worked fine for me in XI, but stopped working when I upgraded XI to XI R2.
Please post a follow-up if you get this resolved! Thanks!
RodneyAZ

Unable to run report in DS 10g Release 2

Hi,
I have no any application server. I am running my application by using the OC4J of Oracle DS 10g Release 2. But I am unable to run report. What I will do? Please.................
Mahfuz.
Edited by: user10239690 on Sep 9, 2008 11:23 PM

wrong thread
Tony
Edited by: Tony Garabedian on Sep 10, 2008 10:21 AM

Crystal Report Server - how to release concurrent user license

Hi all,
I have a client using Crystal report server 2008, they have 25 concurrent user license.
On all the services, the timeout properties is using the default 20 minutes timeout.
If user close a session by pressing the X, instead of clicking Logout, it did not release the license.
Example, instead of recording 12 active user session, it seems to show 15 user sessions where CR server shows that one of the users has 3 sessions open when in fact he only has one session.
Is there a way to resolve that?
From the forum post, I found one of them indicating that there is no solution to this. Is it true? I hope I am just missing something.

There are no session release tools built into XI other than restarting the CMS. If you want you can use SDK code [such as this |http://johnnyye.com/blog/2008/08/12/business-objects-xi-session-removal-tool/]to accomplish a psuedo session management.
In the current version of CRS the cms or code are the 2 best options. I'd keep a look out for changes in future service packs but I'm not aware of anything specific that will be done.
Regards,
Tim

Z report from table VBRK - Release to Accounting indicater

Hello,
Creating a Zreport from table VBRK, and only want to pick billing documnets which are released to Accounting. Is there an indicater in table VBRK, VBRP, or KONV, or somewhere else where i can filter these records.
Thanks

Hi
You can use the table VBUK field BUCHK, ie, if VBUK-BUCHK = 'A'.
The best manner is the view M_VMCFA. If you see in SE11 you can see as works for the field VBRK-RFBSK.
Regards
Eduardo
Edited by: E_Hinojosa on Sep 7, 2011 4:18 PM

Why does the "Dispose Report.vi" doesn't release memory used by report

I have prepared report that includes a few tables After finishing printing, the amount of memory used by my application is bigger. Next printing of the raport lead to crash the LabView because of lack of memory.
It also cause mu application to work slowly.
The amount of used memory is checked by the Task Manager. My operating system is Windows NT 4.

This issue has been reported to R&D, and they are currently going through the VIs and the dll to track down all the memory leaks.
You can go through the VIs and edit them so that every open reference has a reference close. This will not fix all of the leaks but might be enough to get your program working.
Jeremy Braden
National Instruments

Multiple Reporting Currency Setup in Release 11.5.9

Hi,
I need a clarification:
Can one any tell me about the feature of Multiple Reporting Currency (MRC)implementation in Oracle Apps 11.5.9??
Whether it is a newly introduced feature in apps or will it come as existing feature in 11.5.9 instance.
If the MRC setup is already existing in the same instance, Do we definitely require any additional patch to implement MRC in 11.5.9??
Pl. respond if anyone knows the answer.
Regards
Ram

Can any one had implemented Multiple Reporting Currency Concept in Oracle Apps 11.5.9??
Respond....
Thanks/Ram

Report RFKLBU10: Missing Parameter for Logical filename in Release ERP 2005

Hello Experts,
Report RFKLBU10 in Sap Release 4.6c hat a parameter "Old dataset logical name".
The new version of this report in SAP Release ERP 2005 there is no such parameter.
Is this a SAP-Bug ?
Best regards,
Mike

There are no Export or Print events accessible for the viewer
Since it sounds like you are creating the reportdocument object in your click event, the settings on this object become out of scope on successive postbacks executed by other events.
to get around this without major changes, you can place your "report" object in session in this event and retrieve it from session on successive postbacks. This should solve your problems around navigation, printing and exporting. What you will need to do is check if the session object exists (usually in page_load or page_initialze) and if so, retrieve it from session and bind it to the viewer's reportsource. If the session object does not exist, then do nothing (ie you have not clicked your button yet that retrieves the parameter values from session and loads the report). Also, in your click event you can check if the report session object exists and if so, remove it so that it can be re-created with your new parameter values (ie i'm assuming the only time you want to set parameter values is in this event).
Dan

Report for Service Eetry Sheet Release Status

I have created a Service Entry Sheet which has 4 Levels of approval. How will I come to know which level is completed and which one is pending?
Is there any standard report available?

Hi,
then create z report
use
     ESSR-FRGGR - release group
     ESSR-FRGSX - release strategy
     ESSR-FRGZU - release status
     ESSR-FRGKL - release indicator
     ESSR-FRGRL - release not yet completely effected
Regards
Kailas Ugale

Report on PR's released

Similar Messages

Maybe you are looking for