Report on Real Time Cube and Master data

Dear Experts,
I am new to BI. I have created real time cube using some characteristics and top of that I built 3 reports with referring to Master data.
And in the 3 reports, I have used different characteristics for all the report expect one ( common in all the reports).
Now I have to create consolidated report using all the characteristics. I have build some sample reports but getting not assigned where there is no data.
How can I achieve this?
Thanks in advance,
Saravanan R

Hi suman,
Thanks for your reply .
I have attached the screen shot of the output. I have created the Infoset using info objects and real time cube, on top of that I have created query.
this is the problem am facing can please suggest on this .

Similar Messages

  • Bi 7.0 for cube and master data steps

    hi friends,
    can u give me step by step comparision between bi 7.0 and bi 3.0 for cube ods and master data, ple explaing me what are the steps difference for those in bi 7.0 .
    and reporting is same or any difference in bi 7.0 .
    other than sap.help.com material, if u have any other or any screen shots. ple send me.
    Thanking u
    suneel.

    what abt master data, in master data we are using only transfer rules, here also we are using transformation and dtp again.
    Yes we would be using transformations and DTP's on the masterdata too. but the system would prompt to make IO a infoprovider in order to use the new functionality. There is another work around for it, but we can discuss it later, orelse search the forum for that option, i have replied to couple of questions regarding that.
    what abt reporting any things other than calculated kf restricted kf, filters rows columns, free chaststics, variables, any chnages in screen.
    The basic functionality of all the above mentioned objects havent changes, and the query designer itself, there are hell a lot of changes in the appearance and it will take a while to get used to it and find your way with all the functionalities.
    i have doubt bps menas businees planning simulation what is this, bec i have idea we can use transactional cube and transactional ods for write accress for planninmg also
    BPS is something I have no clue abt... (you dont see me answering in Business planning forum)

  • Using Non cumulative key figure in Real time cube

    Hi gurus,
    I have used non cumulative key figure in a real time cube and when i tried to enter some data using RSINPUT ,it is giving an error and the data is not getting saved.
    Can anyone please tell me how to use the Non cumulative key figure in the Real time cube .
    Thanks in advance
    Regards,
    Ravikanth

    Hi Ravi,
          Please make sure that when you use a non cumulative key figure iun your real time info cube, then choose a time reference characteristic for that key figure.
    Then, this time reference characteristic applies for all the non-cumulative values of the InfoCube and must be the u201Csmallestu201D of the time characteristics present in the InfoCube.
    For more detaisl, refer to the [http://help.sap.com/saphelp_nw70/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm]
    Thanks & Regards,
    Balajee.

  • Request does not save for real time cube

    Hello,
    I have created the real time cube  and copied the data from the actual cube.
    I have careted the MP on top of actual adn real time cube.
    created the aggregation level -> Planning function etc.
    I have created the input query and trying make some modification and then clicking on save the data.
    I am getting the message that " data is saved " but request is not getting generated in BW for the real time cube... The real time cube is set to planning.
    Appreciate your immediate help.
    Thanks

    Data is saved ... resolved
    Thanks

  • Odd behavior on web template used to update real-time cubes

    Hello all
    This is my first time posting on this forum so please excuse any blunders.
    I have a situation wherein 2 queries (one built on an aggregate level which is set up on a multiprovider containing a real-time cube and the other built on an aggregate level set up directly on a real-time cube) are being used to update data. For both of these queries, I'm trying to fill in fields such as user, created by, time, date etc. These fields are being filled in the custom class "ZCL_LOC_CR_LINE_ITEM" and all of the settings are correct for the aggregation level/infoproviders.
    However, I'm encountering 2 problems. Firstly, for one of these queries on the web template, the fields I want filled are not getting filled in by the exit. In fact, I put hard-code break points in the exit's DERIVE method but the control is not even going in there. But for the other query, the control flows into the user-exit correctly when I hit the return key after populating all of the remaining characteristic fields on the input screen. Secondly, for the first query, the fields are not input-enabled. But I've set up both queires to be more or less similar in the sense that the fields to be populated in the user-exit are not on the query screen etc. I'm stumped and would appreciate some help from the experts out there.
    Regards
    Sam

    Regarding yor first quesiton, if the exit is not being reached, then most likely you have not correctly defined the characteristic relationship in the planning modeler.  For it all to work, go to the planning modeler for the infoprovider that you are deriving the characteristics.  Ensure that your source characteristics are all contained in the aggregatin level being used by the planning query in question.  Also ensure that none of the target characteristics are contained in the aggregation level.
    Also, make sure that the "inactive" checkbox is not marked for the individual characteristic relationships.
    Note that whether or not the query is on an multiprovider or a real-time sube, the characteristic relationships are always defined directly on the underlying real-time cube.
    Regarding the second question, for a query to be input-ready:
    -There must be a real-time cube in the query directly (or indirectly via mutliprovider)
    -The query must start up in change mode (or be switched into change mode)
    -Cell(s) must be defined as input ready either by their settings in the row or column
    -Every characteristic in the aggregation level must be fully qualified (including currency,UOM, or any nav attributes used as selections)
    - note that when using a mulitiprovider, it is necessary to specify the real-time infocube name in the planning cell/row/col selections
    If all of the above are met, try drilling down in the query once it is presented and see if anything is unaccounted for

  • Cawe see who is planning ( using the real time cube ) currently?

    Hi friends,
    I have a real time cube and users are updating through BEx 7 Planning worksheet.
    Can i see which user is accessing the worksheet and doing planning?
    Please help me in this regard.
    aanand

    Go to tcode RSPLSE, third tab 'Lock' and specify the RT cube name. It will show you all the users that are holding locks currently and their lock records. You can also look at the last locking conflict in the next tab.

  • Error while data loading in real time cube

    HI experts,
    I have a problem. I am loading data from a flat file.The data is loading correctly till the DSO but when i am trying to load it into the cube it is giving an error.
    The cube is  a real time cube for PLANING. I have chnaged the status to allow data loading but still the DTP is giving an error.
    It shows an error "error while extracting from DataStore" and some RSBK 224 ERROR and rsar 051 error.

    What was the resolution to this issue.  We rae having the same issue only with external system (not a flat file).  We get the  RSAR 051 with a return code of 238 error message, like it is not even getting to the rfc connection (DI_SOURCE).  We have been facing this issue for a while and even opened up a message with SAP.

  • Impact of real time cube on query performance and OLAP cache

    Hi:
    We have actual and plan cubes both setup as real time cubes (only plan cube is being planned against, not actual cube) and both cubes are compressed once a day.
    We are planning on implementing BIA accelerator and have questions related to query performance optimization:
    1/ Is there are any query performance benefits in changing the actual cube to be a basic cube (using program SAP_CONVERT_NORMAL_TRANS) if the F table is fully compressed
    2/ Can OLAP cache be leveraged for the queries run against the real time cubes e.g. actual cubes
    3/ What is the impact on BIA of having the actual cube as real time (whetehr or not there is data being loaded/planned during the day in that cube)
    Thank you in advance,
    Catherine

    1) Is there are any query performance benefits in changing the actual cube to be a basic cube (using program SAP_CONVERT_NORMAL_TRANS) if the F table is fully compressed
    From the performance point of view, tha actual cubes i.e std cubes are relatively better.
    2) Yes OLAP cache can be leveraged for bringing up the plan query but all the calculations are done in the planning buffer.
    3) Not sure.

  • How to write data from query into Real time cube?

    Hi All,
    Can anyone explain me step by step how to write data into a real time cube from front end queries.
    Thanks in advance

    Hi
    You can do this using Integrated Planning
    You need to create a aggregation level on the Real Time infocube and can create Planning function/sequence, Variables if needed.
    Then you can create query on this aggregation level and you can make the keyfigures Input ready in property pane and you can change the data and save it into cube.
    Please find below help link which clearly explains step by step about Integrated Planning like creating input ready queries etc.,
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/43/0c033316cd2bc4e10000000a114cbd/frameset.htm
    Regards
    Ravi

  • Error: 0271: Real Time Clock Error - Check Date and Time settings.

    Hello all,
    I have lenovo T430s laptop that is configured with Bitlocker encruptions and TPM PIN entry. I don't think that has anything to do with the error msg I am getting but here it is. Error: 0271: Real Time Clock Error - Check Date and Time settings.
    Press Esc to continue or F1 to enter setup. I am unable to get into BIOS or even the login screen for Windows 7.
    Any advice would be appreciated.

    Thanks to everyone for the help.  Just want to close this out.  I had a IBM/Lenovo technician here today and he replaced the CMOS battery.  Upon the change, the computer is fine being reconnected to the dock (the three times I tried it).  So it has been resolved with the battery.  Surprised by the incompatibility claim because I am not having issues now.  Wondering if it's just a USB 2.0 vs. 3.0 thing (and Lenovo trying to sell more peripherals, of course).
    Thanks!

  • Real Time Clock Error - Check Date and Time settings, System CMOS Checksum bad

    Hello everybody,
    Can help anyone to resolve my problem.
    I have an Thinkpad W520 (42823FG), BIOS 8BET60WW 1.4        When I disconect AC power and remove battery and connect again, I see this message on screen:
    "Real Time Clock Error - Check Date and Time settings, System CMOS Checksum bad
    Press Esc to continue or F1 to enter Setup"
    Is this a system board problem or CMOS battery problem ?
    Thank you

    Hello and welcome,
    It's probably (hopefully) just the CMOS battery.  The easiest way to find out is to just replace that battery.
    Page 85 of the Hardware Maintenance Manual:
    Hardware Maintenance Manual
    Here's an example of the battery.  I'm not recommending (or not) this vendor:
    http://www.ebay.com/itm/New-Lenovo-ThinkPad-W500-W510-W520-W530-W700-W701-W701ds-CMOS-RTC-Backup-BAT...
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Changes to Real-time cube through input-field entry

    Hello,
    I have created query on Real-time cube (which has some data ) and enabled input-entry field for one of the key figures.
    2).Created a "Push-button" to save the changes made in query.
    Issue : changes are not saved at cube level , when i press "Push" button.
    For Push button Properties, I used "Planning -specific Command" --> "Save"
    Pls. let me know possible reasons and solution to the problem.
    Thanks
    CP

    Hi,
    Check at first that you dont have a lock data issue (TCODE SM12).
    If you are using WAD or Query Analyzer, please double check the following:
    1) Your input-ready query must be created based on the aggregation level but not direct to the real-time infocube.
    2) In the Query Analyzer look into the query properties and check that Change Mode is marked on and the key figure properties on the PLANNING tabstrip check that you have at least one method for ready-input.
    3) In WAD Data Provider is linked to your input-ready query.
    4) Check your Analyzer web item looking for data binding to Data Provider just mentioned.
    5) Add a couple of push-buttons with SAVE_DATA command and RESET_DATA also.
    Please check step by step and try again.
    Hope this helps.

  • Hi All, please help me...Real time cube planning layout creation...

    Hi All,
    Could you help me on below process please.
    Iam working with BI7.0. I have real time cube (daily sales) and user need to access and update/add records accordingly.
    So for this real time cube I have to create planning layout with the data. User can see that data and update/add.
    I dont how to create planning layout (i heared that rsplan) how to show the data.
    Also I need some help on ABAP, I need to map some fields from a table.
    Actually from a flat file iam uploading data into ODS. In ODS has 3 more extra infoObjects.
    Ex: Shopping mall code, tenent number and outlet number info i have to pick contract number from table with routine and pass that contact number into ODS one field. It means Contact number will not come from flat file, thats what need table and routine.
    So for that I have to create one table (SE11) with all the information. and i have write routine.
    I have to read flat file 2 fields( like A and B) and check the value in a table and get the value C and put into ODS one field. I have to do this with routines.
    In the table have A, B and C values. Table also I have to create. so also please can u tell me some steps.
    Could you please help on this. Also with process chains for this.
    Thanks in advance!
    anil

    Hi Anil,
    If you go to RSPLAN there you can go to Portal link (it must be configured properly in system)
    In portal there will be wizard where you can easily go step by step and create planning functions and sequences like below:
           1.      You choose the appropriate InfoProvider.
           2.      You create one or more aggregation levels.
           3.      You create one or more filters.
           4.      You create one or more planning functions.
           5.      You create a planning sequence.
           6.      You test the planning model.
    which is clearly explained in below link
    http://help.sap.com/saphelp_nw70/helpdata/en/43/1d2440301a06f4e10000000a422035/frameset.htm
    after doing this you can create a query on aggregates you have created above and then make query input ready i.e planning enabled for keyfigures you want like mentioned in below link:
    http://help.sap.com/saphelp_nw70/helpdata/en/43/1d023a41130bd5e10000000a422035/frameset.htm
    then you can run query in Analyzer and save it as a work book after proper drilldown which can be used as template.
    Hope you understood basic thing, as you going on doing u will know clearly every thing.
    Ravi

  • InfoObjects both appear in transaction data and master data

    Hi,
    If your transaction data has say infoObjects MMM, EEE, and TTT that you're loading daily or weekly, would you also enhance the infoObject MMM to have EEE and TTT as attributes. MMM has master data (attribuets and texts), and EEE and TTT are not key figures. If yes or no, what would be the reasoning for it?
    Thanks,
    Will

    Hi:
    <i>Thanks for the clear explanation. I am working with the material 0MATERIAL. I am enhancing some other InfoObjects for 0MATERIAL_ATTR and 0MATERIAL and at the same time those InfoObjects are being loaded as transactional data too. I am wondering and perplexed about why the requirement would include a view of the data based on the transacitonal load date and the master data load date per your explanation link? Would it have to do something with historical tracking of data?</i>
    1) Since most of the time, we use Business Content, IF it comes with oading both Master Data & Transaction Data same time, we go with it becuase we don't want to unnecessarily change deliverd Content.
    2) ANother good reason is Rememner, Master Data (e.g., for  0material) is not ONLY for the Cueb you are working on, BUT, its shared among other Cuebs in BW landscape. So, there si a agood chance that other Cube will use 0material, but doesnot have e.g., 0MATL_GROUP as transaction data. So, you should have Master Data that will be shared by all the Cubes/InfoProviders using it.
    3) Next, if your Master Data changes (and your Master Data is not Time Dependent), then you can go to Cube and see what was the value on the day you laoded the Cube (I guess I already said this info in prevous post, just to repeat).
    <i>Have you come across or implemented this requirement and why would anyone want to implement this approach to see data from the transactional and master data point of view in terms of the load date?</i>
    Yes, I had come across many examples similar to the one that I just stated.

  • Unable to create an universe on a query based on a real time cube

    Hello,
    I'm trying to create a universe on a BEx query. This query is based on a multiprovider which consists of one standard cube and one real time cube. I'm unable to see this query in the designer. I do see an empty folder with the name of the multi provider.
    I can create an universe directly on this multiprovider.
    Are there any specific setting for real time cube or is it a compatibility issue? Can an universe be created on a real time cube?
    Regards,
    Sameer

    Hi Sameer,
    Let me know if this SAP note helps: 1291966 - "Output Cache Directory" & "Enable Real Time Cache" options in Central Management Console

Maybe you are looking for