Report on running services/processes?

is it possible to create a report on running services, we are just starting to look at the reporting possiblities but we have a need to target and remove a certain service. The novell ZAM7 did not uninstall itself on a bunch of our windows 2000 machines when ZCM was deployed and now that the old ZEn server is gone we suspect slowness on booting those pc's due to the ZAM. So if we could report on the cclient.exe service running on certain machines that would help us track them down and remove the ZAM.

Originally Posted by rvhskent
is it possible to create a report on running services, we are just starting to look at the reporting possiblities but we have a need to target and remove a certain service. The novell ZAM7 did not uninstall itself on a bunch of our windows 2000 machines when ZCM was deployed and now that the old ZEn server is gone we suspect slowness on booting those pc's due to the ZAM. So if we could report on the cclient.exe service running on certain machines that would help us track them down and remove the ZAM.
I foudn a round about way to get the information i wanted via a canned report, Zen hasa canned report that ideintifies asset inventory software and because i was looking for zam 7 it reported all instances of it, so now i can go ahead and clean off the machines that for whatever reason still have it.

Similar Messages

SQL Server 2005 agent job runs a SSIS package ( Analysis Services Processing Task) fails

Hi,
SQL Server 2005 standard edition.
I have a SSIS package which has a Analysis Services Processing Task. I have tested the package in BIDS and it runs ok. But when I created a agent job and run it from the job it reports error:
Code: 0xC0012024 Source: Analysis Services Processing Task Description: The task "Analysis Services Processing Task" cannot run on this edition of Integration Services.
It requires a higher level edition.
This is the result of select @@version
Microsoft SQL Server 2005 - 9.00.4035.00 (Intel X86) Nov 24 2008 13:01:59 Copyright (c) 1988-2005 Microsoft Corporation Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
Any idea?

Hi,
SQL Server 2005 standard edition.
I have a SSIS package which has a Analysis Services Processing Task. I have tested the package in BIDS and it runs ok. But when I created a agent job and run it from the job it reports error:
Code: 0xC0012024 Source: Analysis Services Processing Task Description: The task "Analysis Services Processing Task" cannot run on this edition of Integration Services. It
requires a higher level edition.
This is the result of select @@version
Microsoft SQL Server 2005 - 9.00.4035.00 (Intel X86) Nov 24 2008 13:01:59 Copyright (c) 1988-2005 Microsoft Corporation Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
Any idea?
Anyway, I have found a work around:
http://technet.microsoft.com/en-us/library/ff929186.aspx

Configure Report to run from Self service

I would like to know is there any procedure or document to run the Oracle Report
through self service in Oracle Applications using Report server i.e. using rwcgi60 .
Regards
Muhammad Ali

Check the "Concurrent Processing" chapter in OAF dev guide. It explains everything.
--Shiv

How to know what reports are running by looking at SSReproting Services to see what reports are running and also any clue of which application is using the reporting services?

How to know what reports are running by looking at SSReproting Services to see what reports are running and also any clue of which application is using the reporting services?

To see what reports are running, take a look at the execution log views that are available in the database. Which views that are available are dependent on your version of SSRS.
http://technet.microsoft.com/en-us/library/ms159110.aspx
To see which application is using SSRS is a little more difficult. You can turn HTTP logging on, which will give you an idea of where connections are coming from, so you can see IP addresses. You can also look at the execution log view to see
user accounts. So, depending on your environment and use of service accounts, this could be easy, or difficult.
http://technet.microsoft.com/en-us/library/bb630443.aspx
If all else fails you can look for clues in the SSRS logs. Good luck...

Running a process prevent calling any service control in the application

I created a process project which chained a few web services. I also created a HelloWorld service which is not related to the process at all. I then created a pageflow in the web project. The pageflow calls the HelloWorld service control.
The problem I met is the after I run the process, I could not run the pageflow. The below exception is thrown. The domain I was running is a portal domain extended with Integration configuration. Any solution, clue ....
Thanks in advance.
An error has occurred:
An exception occurred in the action hello
EJB Exception: ; nested exception is:
com.bea.control.ServiceControlException: SERVICE FAULT:
Code:java.io.FileNotFoundException
String:Response: '403: Forbidden' for url: 'http://localhost:7001/AlertSrv/alert/HelloWorld.jws'
Detail:
END SERVICE FAULT
caused by: : com.bea.control.ServiceControlException: SERVICE FAULT:
Code:java.io.FileNotFoundException
String:Response: '403: Forbidden' for url: 'http://localhost:7001/AlertSrv/alert/HelloWorld.jws'
Detail:
END SERVICE FAULT

Thanks to Scott for correcting Manish's misdirection. I went looking for that option, didn't find it! :-/
I had created an application process to run "On New Session After Authentication" but I found it was actually running when the Login page was being displayed (I had the process write to the database each time it was run), before the user actually logged in. So it didn't know who the user was yet, which is needed to run my process. Ouch!
Since we're planning to change the authentication method for production, I'd really prefer to define an after-authentication process, but I guess I'll have to drop the code in the Authentication method's Post-Authentication Process.
- Stew

SCCM 2012 R2- Report that show running service

Is there a way to report running services on a client, and what user is running them?
Thanks in advanced for your help.

Just in case anyone needs it, here is the Query I used. Thanks for the answer above Jason :)
SELECT
SCCM_Ext.vex_GS_SERVICE.StartName0
,SCCM_Ext.vex_GS_SERVICE.Name0
,SCCM_Ext.vex_GS_SERVICE.DisplayName0
,SCCM_Ext.vex_R_System.Netbios_Name0
,SCCM_Ext.vex_R_System.Operating_System_Name_and0
,SCCM_Ext.vex_GS_SERVICE.PathName0
,SCCM_Ext.vex_GS_SERVICE.ServiceType0
,SCCM_Ext.vex_GS_SERVICE.StartMode0
,SCCM_Ext.vex_GS_SERVICE.Status0
,SCCM_Ext.vex_R_System.ResourceID AS [vex_R_System ResourceID]
,SCCM_Ext.vex_GS_SERVICE.ResourceID AS [vex_GS_SERVICE ResourceID]
,SCCM_Ext.vex_R_System.Resource_Domain_OR_Workgr0
FROM
SCCM_Ext.vex_GS_SERVICE
INNER JOIN SCCM_Ext.vex_R_System
ON SCCM_Ext.vex_GS_SERVICE.ResourceID = SCCM_Ext.vex_R_System.ResourceID
Skyhawk12

Service process is running in code page [MS Windows Latin 1 (ANSI), superse

All,
I am trying to create Integration service, getting errors on Windows.
Can anyone tell me where exactly where the service process is pulling the Latin 1(Ansi) settings from.
I am stuck on this setup.
regards
girish

you first create the Informatica repository and then you have to select it for integration services, therefore the properties of integration services such as a code page are controlled by repository 's properties.
If you follow all the steps from this guide, informatica will configure fine.

Report server run problem (urgent plz)

i am using developer9i, xp opereting system but i am not able to run report server . infact i dont know where report server reside and how configure report server. otn discussion forum gave me below instructions but i need step by step detail to run report server.
pls help me.
i want to see (Please reffer to Note:204538.1 on
Metalink ) but i could not access metalink.
registration does not alow me. i have no country on
country list and no Support Identifier (CSI, SAC,
Access Code etc.) . but i need access.
please help me. access with path
thanks
mostafizDear see this information this is metalink information
Note:204538.1
Subject: Common Reasons & Troubleshooting: "Unable to communicate with the Reports Server"
Type: BULLETIN
Status: PUBLISHED
Content Type: TEXT/X-HTML
Creation Date: 22-JUL-2002
Last Revision Date: 08-MAR-2005
PURPOSE
========
The main purpose of this document is to list the known causes of the "Unable to
communicate with the Reports Server" error. The terms Reports Server, CGI,
Reports Servlet are also described briefly for a better explanation of this error scenario.
This document includes the following sections :
I. Brief summary on the architecture of Reports Server, CGI and Reports
Servlet
II. Sources of errors encountered when running a report with Reports Server
III. How the CGI (or the Reports Servlet) communicates with the Reports
Server
IV. Possible reasons which lead to "Unable to communicate with the Reports
Server" error.
1) Reports Server is up and running
2) tnsnames.ora and sqlnet.ora problems
3) Effect of parameter "ORACLE_HOME"
4) Effect of parameter "maxconnect"
5) Passing very large parameters to reports server
6) A case specific to OAS 4.0.8.2
7) A case specific to WEBDB version 2.1.0.9.3
V. References
I. Brief summary on the architecture of Reports Server, CGI and Reports Servlet
=================================================================================
In order to understand the causes of the error "Unable to communicate with the
Reports Server", let's first briefly review the Reports Runtime Engines, Reports
Server, the Reports CGI, and Reports Servlet architecture.
There are 4 important layers in Reports Server architecture which should be
understood in order to clearly understand the error "Unable to communicate with
the Reports Server" :
1) The Runtime Engines : This is the main layer where the reports are actually
executed. On unix systems there are "rwrun60" and on NT systems there are
"rwrun60.exe" processes.
2) The Reports Server : The Reports Server recieves the job request and queues
it. When one of its runtime engines becomes available, it sends the
command line to that runtime engine for execution. On Unix systems it is
the "rwmts60" executable and on NT systems it is "rwmts60.exe".
3) The Reports CGI : The Reports Web CGI passes the request to the Reports Server.
The Reports CGI or Servlet converts the request to a command line that can be executed by the Reports Server and
submits it to the specified Reports Server. On Unix platforms this executable
is "rwcgi60" and on NTs it is "rwcgi60.exe.
4) The Reports Servlet : Its functionality and function is just the same as "Reports CGI", but it is
a program written in Java as difference to the CGI program (which is
written in C programming language).
The Reports Server may be running on the same server with the CGI program (or
servlet) OR may reside totally on another machine which does not necessarily have
the same Operating System. For instance CGI may reside in a Windows NT machine
while the Reports server may reside on a Unix box, or any other combination with
Unix-Linux-NT-2000, etc.
The reports are called with a URL similar to below with the CGI :
http://fully.qualified.server.name:PORT/dev60cgi/rwcgi60.exe?server=<REPSERVER>&other_parameters=...........
where fully.qualified.server.name is the name of the server where the Reports CGI
reside, and <REPSERVER> is the name of the server.
II. Sources of errors encountered when running a report with Reports Server
============================================================================
The Reports Web CGI (or the Reports Servlet) makes a call to the Reports Server
and asks it to place the output into some destination (defined by DESTYPE and
DESNAME parameters), then gives back the necessary response to the calling
program. For example if the DESTYPE is "cache", then the Reports server generates
the report to a file in a temporary place and gives it back to CGI and the CGI gives
it back to the calling program. Otherwise, if the DESTYPE is "file", the Reports Server
generates the report output to the requested file and the CGI replies back the
following message : "Report output was successfully written to requested
destination.".
If there is any error in this process, the related error message is returned. The
possible sources of errors can be categorized as follows :
1) The errors that are returned from Reports Server; like the Reports Server can
not find the requested RDF file or the report may be run to file and the
directory where the reports output is asked to be placed does not occur or
similar errors. (Usually the REP-XXXX errors)
2) Another possible cause of error is the errors returned by the RDBMS to the
Reports Server, for example a table not found error or things like that. Of
course from the CGI point of view these errors are again transmitted from the
Reports Server but in fact the error originates from the RDBMS. (Usually the
ORA-XXXX errors)
3) Another possible cause of errors is the CGI itself, for example when the CGI
executable can not connect to the requested Reports Server, then we get the
famous "Unable to communicate with the Reports Server". In this document we will
diagnose the common reasons of this last error.
III. How the CGI (or the Reports Servlet) communicates with the Reports Server
===============================================================================
Having said that "Oracle Reports Server CGI - Unable to communicate with the
Reports Server." error is returned back from the CGI itself, let's discuss the
issue of how the Reports CGI connect to the Reports Server. The name of the
Reports Server given in the URL with "server=....." parameter is, in fact, just
a special tnsnames alias, similar to aliases for database connect strings. As it is
important for the CGI to resolve the alias, the CGI needs to know the HOST name (or the
IP) of the machine where the Reports Server is running and the port on which the
Reports Server is listening. So a typical Reports Server alias is defined as follows :
REP60_<MACHINE>=(ADDRESS = (PROTOCOL = tcp)(HOST = <MACHINE>)(PORT = <PORT>))
This is defined in tnsnames.ora file, and the sqlnet.ora file is also used in
the name resolving operation.
IV. Possible reasons which lead to "Unable to communicate with the Reports Server" error.
==========================================================================================
The possible reasons for the "Unable to communicate with the Reports Server" error :
1) Reports Server is up and running :
Make sure that the Reports Server is really running on the specified server
and listening on the specified port. For details have a look at above
explanations for tnsnames alias of the reports server. And because of this the
CGI could not establish a connection to the Reports Server.
2) tnsnames.ora and sqlnet.ora problems :
As described above, the CGI resolves the details for the reports server using
the "tnsnames.ora" and "sqlnet.ora" files. There may be a problem with them,
here are the possible configuration problems :
a) There is no alias in the tnsnames.ora file for this Reports Server
b) The CGI looks into the wrong directory for the "tnsnames.ora" and "sqlnet.ora"
files. By default the CGI checks the $ORACLE_HOME/net80/admin directory for
these scripts, where the $ORACLE_HOME is the home of the Forms & Reports
installation. Please note that in a typical 9iAS 1.0.X installation there
are two ORACLE_HOME's, one is for the iAS and the other is for the tools,
usually the home for the tools is a directory with name "806" on NT and
"6iserver" on unix systems. By defining TNS_ADMIN in the environment, one
can override the search path for these two files.
The TNS_ADMIN variable can be defined in one of the following places :
i) In the environment : On MS Windows platforms check the "Settings
--> Control Panel --> System". On NTs check the environment TAB and in
Win2K systems check the "Environment Variables" button on Advanced tab.
ii) In "6iserver.conf" file. Details are as follows : The main configuration
file for Apache server is "httpd.conf" file which resides in
$IAS_HOME/Apache/Apache/conf directory. In this file there is a line to
include "oracle_apache.conf" and in this "oracle_apache.conf" file
there is a line to include "$ORACLE_HOME/conf/6iserver.conf" file. And
in this file the TNS_ADMIN variable could be defined as follows :
SetEnvIf Request_URI "rwcgi60" TNS_ADMIN=c:\orant\network\ADMIN
Please note that by defining it this way, the TNS_ADMIN will only be defined
for "rwcgi60" calls, so the other parts of the 9iAS will not be affected by
this setting.
c) In sqlnet.ora the "names.default_domain" is set but in tnsnames.ora the
domain is not defined in the alias description. For example if the
"names.default_domain=world" is present and active in "sqlnet.ora" file
then in the "tnsnames.ora" the alias of the reports server should also have
the ".world" extension appended at the end. And another cause is of course
the vice versa for this. If there is no "names.default_domain" is defined
in the "sqlnet.ora" then the alias in "tnsnames.ora" should not have the
domain extension.
Another important point that should be checked is, if TNS_ADMIN is defined
as described above then the search path is as follows, first the directory
defined by TNS_ADMIN is searched, if the "tnsnames.ora" file is not found in
this directory then $ORACLE_HOME/net80/admin is checked. (And on unix systems
/var/opt/oracle is also checked). These directories are only checked if the file
is not present, so if the "tnsnames.ora" file is present in TNS_ADMIN directory
but the alias is not present, then the other directories are not checked at all.
Let us assume that the tnsnames.ora file is present in the TNS_ADMIN directory but
there is no "sqlnet.ora" files here, then the sqlnet.ora file is checked in
$ORACLE_HOME/net80/admin directory, which could cause the same problem if the
"names.default_domain" is defined in this file.
All the above will result in, CGI to unable to resolve the alias in tnsnames.ora
file so it will not be able to establish a connection to the Reports Server.
3) Wrong "ORACLE_HOME" setting :
Wrong ORACLE_HOME setting. This is usually the case for Reports Servlet,
because the environment settings are defined in "jserv.properties" file for the
servlets and the setting here will effect both the Reports Servlet and the
setting for Oracle JSP and other servlets. So the other servlets or Oracle JSP
may need to set ORACLE_HOME to home of HTTP server while the reports server needs
it to be set to the TOOLS_HOME directory. In this case the best alternative is
not to set ORACLE_HOME in this directory and leave it to registry or defined the
ORACLE_HOME in "6iserver.conf" file just like the TNS_ADMIN defined above. For
details please have a look at the following document :
Note 179609.1 "Getting an error Unable to communicate with the Reports Server
using RWSERVLET"
4) Effect of parameter "maxconnect" :
Another common case for this error is that the CGI request reaches the Reports Server but
the Reports Server refuses connection. The main cause for this case is, that the Reports Server
configuration parameter "maxconnect" is defined too low, there are long running reports on the
server or the server is too busy at that time. Usually a second try some
later time results in a successful connection. If this is the case, the end user
may think that the problem is occasional. For details on this case please
have a look at the following document :
Note 125265.1 "Unable to communicate with the Reports Server"
5) Passing very large parameters to reports server :
Another known reason for this error is, if you are passing large parameters
to the Reports Server which exceeds sqlnet transmission blocks then the request may
end up with this error. To test it try with small parameter values. If you hit
this case, the solution is to increase the SDU (Session data unit size) and the TDU
(Transport unit data size) parameters in tnsnames.ora file, for details please
have a look at the following document :
Note 197358.1 "Passing large parameters to Reports show up a Reports Server
error"
6) A case specific to OAS 4.0.8.2 :
If you are using OAS instead of iAS, and the error appeared after
upgrading to 4.0.8.2 then this is caused because the 4.0.8.2 is using RSF
(Required Support Files) version 8.1.6 and the Reports 6i is using 8.0.6 and the
two could not reside in the same ORACLE_HOME directory. So the solution for this
problem is to create a new batch file and use it from which the actual CGI
executable is called. For details please see the following document :
Note 116754.1 "After applying OAS 4.0.8.2 CGI and Cartridge cannot communicate
to report server"
7) A case specific to WEBDB version 2.1.0.9.3 :
Another known case for this error is with WEBDB version 2.1.0.9.3 or less.
If you are using these old versions of WEBDB as HTTP listener, please have a
look at the following document :
Note 95426.1 "URL Not Found When Calling Oracle Developer Report from WebDB Site"

On Windows you can create a Report Services:
rwserver -install server=repserverYou have to choose different names for all servers, like your collegue cannot create a server with the same name. You can start/stop this Report server in Services (control panel). Configuration files can be found under $ORACLE_HOME/reports/conf
Martin

Error with Scheduling a Report to run in SSRS 2000

Getting the below error when trying to schedule the report to run.
I can run the report just fine as a stand-alone and not thru the scheduler.
I have several others that run just fine in the same way.
ReportingServicesService!processing!5d4!8/24/2010-01:15:02:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Query execution failed for data set 'DataSource1'., ;
Info: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Query execution failed for data set 'DataSource1'. ---> System.Data.Odbc.OdbcException: ERROR [01004] [AcuCorp, Inc.][AcuODBC Driver][ISAM]Unable to open xfd file
at System.Data.Odbc.OdbcConnection.HandleError(HandleRef hrHandle, SQL_HANDLE hType, RETCODE retcode)
at System.Data.Odbc.OdbcCommand.ExecuteReaderObject(CommandBehavior behavior, String method)
at System.Data.Odbc.OdbcCommand.ExecuteReader(CommandBehavior behavior)
at System.Data.Odbc.OdbcCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
at Microsoft.ReportingServices.DataExtensions.CommandWrapper.ExecuteReader(CommandBehavior behavior)
at Microsoft.ReportingServices.ReportProcessing.a1.v()
--- End of inner exception stack trace ---

Hi Brian,
Looking at the error, the server is not able to get to the data source. If you are using ODBC, make sure the server machine has access to the file.
The exception is coming from your ODBC driver.
ERROR [01004] [AcuCorp, Inc.][AcuODBC Driver][ISAM]Unable to open xfd file
Brad Syputa, Microsoft Reporting Services This posting is provided "AS IS" with no warranties.

Installing Patch 9.2.0.5: Weird "Stop Running Services" Screen

Hi to all.
I found this issue in several places, including this forum, but I never saw a working proposal for a satisfying solution. Installing Oracle Patch 9.2.0.5 over a 9.2.0.1-Installation on XP Pro, I was confronted with a "Stop Running Services" screen, that listed ALL running Windows Services, even the most basic ones, which are required for a working OS and cannot/should not be stopped. Of course I had stopped the Oracle listener and instance services (including the recovery service, omtsreco.exe).
I found using TASKLIST.EXE or LISTDLLS.EXE, that many Oracle DLLs like ORAPLS9.DLL were used by a command "svchost -k netsvcs". But I could not find out, where and for what reason this command is launched and how I can prevent this launching without hazarding the system. The string "netsvcs" can not be found in the registry, for instance.
At least, somehow I managed to do the job, but I cannot exactly recall all the steps I took! At the "Stop Running Services" screen I chose "Abort current component and continue installation", and after install finished (it said something like "install finished with errors" or that like), I was left with a non-functioning Oracle client. Whopee! It told me "Bad function entry point" when I tried to start SQL*Plus. Desperately, I started the patch installation a second time. THIS time I installed OUI 10.1.0.2 as a first step (which I did NOT during the first round), and then started patch install. Strangely, this time I was presented another flow of dialogs (Sorry, but I missed to make notes about the exact titles and the dialog flow), which took MUCH MUCH longer ("Analyzing Dependencies" for example, took 1.5 hours to complete), and I really do not know, how or whether I was confronted with a "Stop Running Services" issue), but after all I really managed to complete the second try successfully, and the client functions worked again (SQL*Plus reported the correct version, 9.2.0.5).
Before I'm driven through this hell again (I have to patch several workstations running 9.2.0.1), I'd like to know,
- Whether the issue has been solved, that the "Stop Running Services Screen" lists
most basic services like "Event Manager". Could it have been caused by using the
wrong OUI version or under what circumstances will it appear?
- Secondly, what is this mysterious "svchost -k netsvcs" (netsvcs = NETSerViCeS ?)
locking many of the DLL files in the Oracle "BIN" folder. It is definitely NOT
one of the Oracle listener or instance services (all of which start with "Oracle").
How can this service be disabled or be prevented from loading the Oracle DLLs?
Sorry for the long story and partially unclear details, since I do not recall all of the long installation session. Any input is welcome.
Werner

Ok, "netsvcs" CAN be found in the registry, but I used FINDSTR.EXE to seach a UNICODE .REG file, and of course had no hits. Meanwhile, I learned more about SVCHOST.EXE and it's service groups, one of which is "netsvcs". In HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SvcHost, I found a value and a key named "netsvcs", the value contains this string (abbreviated):
"6to4
AppMgmt
AudioSrv
Browser
CryptSvc
helpsvc
xmlprov
wscsvc
WmdmPmSN".
These are the symbolic names of the services presented to me in the "Stop Running Services" screen! Now it's clear, why this screen appears, since "svchost -k netsvcs" is the process locking the Oracle DLLs.
But the question remains: WHY does "svchost -k netsvcs" need access to Oracle DLLs? Which system or application setting controls whether svchosts tries to load the DLLs?
Still puzzled. Werner.

RW-50004: Error code received when running external process.

Hi,
I am trying to install 11.5.10 on windows vista and receiveing following error.
RW-50004: Error code received when running external process. Check log for details. Running Database Install Driver for VIS Instance
When checked on the log file following is the error. Could anyone pls help me with this regard
There was an error while running the command - c:\OracleApps\visdb\9.2.0\temp\VIS_erp\adrun9i.cmd APPS APPS
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process.
"dbInstancecfg" file shows below error
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCVIS))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=erp.erp)(Port=1521))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 13-JUL-2008 05:48:04
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Starting tnslsnr: please wait...
TNS-12546: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00516: Permission denied
32-bit Windows Error: 5: Input/output error
addlnctl.cmd exiting with status 3
OpenSCManager failed
adsvdlsn.cmd exiting with status 1002
ERRORCODE = 1002 ERRORCODE_END
.end std out.
System error 1060 has occurred.
The specified service does not exist as an installed service.
.end err out.
File c:\OracleApps\visdb\9.2.0\appsutil\install\VIS_erp\afmkinit_inst.cmd not instantiated in the current pass, this file will not be executed
Executing script in InstantiateFile:
c:\OracleApps\visdb\9.2.0\appsutil\install\VIS_erp\afmkinit.cmd
script returned:
Sun 07/13/2008
05:48 AM
1 file(s) copied.
1 file(s) copied.
1 file(s) copied.
"afmkinit.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Skipping INSTE8_PRF
Skipping INSTE8_APPLY
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: c:\OracleApps\visdb\9.2.0\appsutil\install\VIS_erp
adsvdlsn.cmd INSTE8_SETUP 1002
AutoConfig is exiting with status 1

Thanks for the update and the link was informational.
Can I install following on windows vista? Pls confirm.
Oracle® Applications 11i Release 10.2 Media Pack for
Microsoft Windows (32-bit) No That's not possible, if you would like to use this machine for Applications then the OS needs to be changed or install vmware/Microsoft Virtual PC with a Certified Operating system to be able to use Applications.
Thanks
Ronald

Report Server Windows Service SQLEXPRESS Error 107 on startup

Hi,
After reviewing the top related threads I didn't find what I'm looking for. People either gave up, or shut down the service. I'd like to solve this.
After investigating the problem on my server, I find the Report Server is doing just fine and this appears to be a transient error during boot as the other MSDN threads have indicated; evidently the SQL server is not yet ready when Reporting Services
looks for it.
While we could ignore this error, most of us would like to only see errors that are real, otherwise the real errors can get lost in the noise. So,
1) If the Report Server Windows Service were delayed during boot, would that stop the error event from occurring?
2) Assuming the answer to #1 above is yes, how do I delay the Report Server Windows Service?
Thanks.
Best Regards,
Alan

Hi Alberto, (again :-))
Thank you kindly for your quick response.
I had already read that TechNet article, so thanks for confirming I am on the right track. But that article, nor it's children articles, doesn't explain how to stop the error, unless I looked at the answer and didn't recognize it.
But I do recognize your alternative answer which I think is the solution I should use.
So, if you don't mind helping with some very basic instruction/confirmation:
Batch file content: I understand batch files themselves quite well. I wouldn't have known how to do the instruction you gave without your help. Thanks again. After the step above when I want to start the service,
am I correct that the next line in the batch file would be:
Net start ReportServer
I looked at Properties for the 'SQL Server Reporting Services' and that's the service name that was listed. It also changed in the Administrative Tools > Services panel when I stopped and started the Report Server from the Reporting Services Configuration
Manager. (SVRTFS\MSSQLSERVER) (SVRTFS being the name of the server I am working with)
Batch file activation: Would you mind just confirming for me the
best way to have the batch file run on server boot. What's the
best place to save the batch file and what's the best way to ensure the batch file runs at the appropriate time?
You mentioned powershell. Is there a reason that would be better than a regular batch file? I'm still beginning and don't quite understand the difference between powershell and not powershell.
But I do want this process to be automatic which is where I think you are driving me.
Thanks.
Best Regards,
Alan

XML Pub: Purchase Order Report (Portrait) running too long

Hi:
"XML Pub: Purchase Order Report (Portrait)" running too long. It should be 1min. but now over 20min. This is 11.5.10.2 on unix.
The log file is like the following. It stops there. I checked another one ran before, there are more data...
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_report_type='R'
P_po_num_from='6640015'
P_po_num_to='6640015'
P_test_flag='N'
P_user_id='14955'
P_QTY_PRECISION='4'
P_fax_ind='N'
P_EMAIL_IND='N'
P_REQUEST_SOURCE='MANUAL'
Environment will now switch to UTF-8 code-set.
Parts of this log file may not display correctly
as a result. This is an expected behavior.
XML_REPORTS_XENVIRONMENT is :
/oracle/product/8.0.6finshdw/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /oracle/product/8.0.6finshdw/guicommon6/tk60/admin/Tk2M
otif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
===============================================
From the internal Manager log:
Process monitor session started : 29-APR-2011 12:35:56
Internal Concurrent Manager found node APPSNOTE2 to be down. Adding it to the l
ist of unavailable nodes.
Process monitor session ended : 29-APR-2011 12:36:00
Process monitor session started : 29-APR-2011 12:38:00
Process monitor session ended : 29-APR-2011 12:38:04
Process monitor session started : 29-APR-2011 12:40:04
Process monitor session ended : 29-APR-2011 12:40:09
Process monitor session started : 29-APR-2011 12:42:09
Internal Concurrent Manager found node APPSNOTE1 to be down. Adding it to the l
ist of unavailable nodes.
Process monitor session ended : 29-APR-2011 12:42:15
======================
please advise.

last lines of FNDCPGSC29793.tx
)]:BEGIN :[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.Processor.sleep()]:Waiting 10 seconds (10000 ms)
[ 1:STATEMENT:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.Processor.run()]:Running loop from the top.
-1:-1:PROCEDURE:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.Processor.processControlEvent(String)]:BEGIN (noEvent)
:-1:-1:STATEMENT:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.Processor.processControlEvent(String)]:Did not receive any control events.
-1:PROCEDURE:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsm.GSMQueueProcessor.process()]:BEGIN
:-1:PROCEDURE:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsm.GSMQueueProcessor.read()]:BEGIN
:-1:STATEMENT:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.Processor.run()]:Running loop from the top.
-1:-1:PROCEDURE:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.Processor.processControlEvent(String)]:BEGIN (noEvent)
:-1:STATEMENT:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.Processor.processControlEvent(String)]:Did not receive any control events.
:-1:PROCEDURE:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.SvcComponentMonitor.process()]:BEGIN
-1:-1:PROCEDURE:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.SvcComponentMonitor.startAutomaticComponents()]:BEGIN
-1:STATEMENT:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.SvcComponentMonitor.process()]:On-Demand monitoring will not occur this round; the count is 3 out of 5
[Apr 29, 2011 1:19:5 :-1:-1:STATEMENT:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.Processor.run()]:Resetting Error Count
[Apr 29, 2011 1:19:51 1:-1:PROCEDURE:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.Processor.sleep()]:BEGIN :1304097591452:Thread[ComponentMonitor,5,main]:0:-1:
-1:STATEMENT:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.Processor.sleep()]:Waiting 60 seconds (60000 ms)
[Apr 29, 2011 1:20:00 PM EDT] 1:-1:PROCEDURE:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.Processor.sleep()]:BEGIN
[Apr 29, 2011 1:20:00 PM EDT]: 4:-1:-1:STATEMENT:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.Processor.sleep()]:Waiting 10 seconds (10000 ms)
Edited by: user9231603 on Apr 29, 2011 10:22 AM
Edited by: user9231603 on Apr 29, 2011 10:25 AM

Ability to schedule a report to run in background but No access to transact

Hi,
I want to give users ability to schedule a report to run in background but No access to transaction Sm37.
What can be the process/steps to work and morever if we do this is there any disadvantages that users
can face later...
<removed_by_moderator>
Thanks,
Barada
Edited by: Julius Bussche on Jan 28, 2009 1:12 PM

Sorry, I misread your question - thinking that the report should only be run in the background.
I agree with the others (also about SMX and SMXX to display their own jobs, but not change them afterwards), but which report (tree) is this?
You can still give the user an ability to maintain a variant via transaction VARCH though (no execute possibility) . It will check S_PROGRAM p_action VARIANT or look for a user specific protection flag.
But then the user can submit it online as well from other transactions. That is why I thought you were looking for a way to run it as low priority in the background only.
Cheers,
Julius

Error in Deploying the web service process

Hi all,
I will working on web service process in ebs server. In this server i had executed the web service process successfully.
After Restarting my ebs server i checked again the web service process , but it throws following error running the "Asant deploy-war" command.
Error is :
The following error occurred while executing this line:
/p01/oracle/pixcomn/java/oracle/apps/webservice/j2eetutorial15/examples/common/targets.xml:56:
An exception occurred while running the command. The exception message is: CLI171 Command deploy failed :
Application hello-jaxrpc is already deployed on other targets. Please use create-application-ref command to create reference to the specified target;
requested operation cannot be completed.
Please help how to solve this web service issue.
Thanks
Prabu

Hi Hussein,
I checked the Server log , i got the followinf log file.
[#|2012-02-03T13:11:34.993+0530|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|WEB0200: Configuration error in web module [hello-jaxrpc] (while initializing virtual server [server])
com.sun.enterprise.config.ConfigException: I/O error while loading deployment descriptor for: hello-jaxrpc
cause: The archive null does not contain deployment descriptor file WEB-INF/web.xml
     at com.sun.enterprise.instance.WebModulesManager.getDescriptor(WebModulesManager.java:398)
     at com.sun.enterprise.instance.WebModulesManager.getDescriptor(WebModulesManager.java:343)
     at com.sun.enterprise.web.VirtualServer.loadWebModuleConfig(VirtualServer.java:518)
     at com.sun.enterprise.web.VirtualServer.getWebModules(VirtualServer.java:365)
     at com.sun.enterprise.web.WebContainer.loadWebModules(WebContainer.java:837)
     at com.sun.enterprise.web.WebContainer.start(WebContainer.java:722)
     at com.sun.enterprise.web.PEWebContainer.startInstance(PEWebContainer.java:515)
     at com.sun.enterprise.web.PEWebContainerLifecycle.onStartup(PEWebContainerLifecycle.java:54)
     at com.sun.enterprise.server.ApplicationServer.onStartup(ApplicationServer.java:300)
     at com.sun.enterprise.server.PEMain.run(PEMain.java:294)
     at com.sun.enterprise.server.PEMain.main(PEMain.java:220)
Caused by: java.io.IOException: The archive null does not contain deployment descriptor file WEB-INF/web.xml
     at com.sun.enterprise.deployment.archivist.Archivist.readStandardDeploymentDescriptor(Archivist.java:233)
     at com.sun.enterprise.deployment.archivist.Archivist.readDeploymentDescriptors(Archivist.java:195)
     at com.sun.enterprise.deployment.archivist.Archivist.open(Archivist.java:131)
     at com.sun.enterprise.deployment.archivist.ApplicationArchivist.openArchive(ApplicationArchivist.java:673)
     at com.sun.enterprise.instance.WebModulesManager.getDescriptor(WebModulesManager.java:387)
Thanks
Prabu

Report on running services/processes?

Similar Messages

Maybe you are looking for