Report on stock and serail number

Hi,
Can anybody help me with the possible reports in R/3 to see the stock and the serail number other than MMBE
thanks in advance
Hemanth

hi,
Wht is this Serial no. your looking for??
If you want reports then you can check:
MB52, MB53, MB5B etc...
Hope it helps..
Regards
Priyanka.P

Similar Messages

Data Mismatch: Plant level stock and Serial Number collection

Hi,
I am working with stock in SM.
I want the plant level stock and the serial number collection for the serialised material. The value coming for the plant stock is 20 (Eg. MATNR = 50004050) and the corresponding serial number collection is 27. But the values in plant stock and in the serial number collection should be one and the same.
For getting the plant stock I'm using the MARA and MARC table. For getting the serial number collection I'm using EQUI and EQBS table.
When I increase the stock using the transaction MB1C and movement type 561, I'm giving the serial numbers for the material. The issued serial numbers are coming in the serial number collection correctly but the stock at the plant level is not getting updated properly. Please let me know from where I can get same stock.
Thanks in Advance,
Mohan

This could happen, if the status of serial number is wrongly updated to ESTO. From where are you taking serial numbers?Physically what is right the qty showing plant stock or the qty showing serial number? May be you go and check the history of the serial number to see if it is really available in stock.
Also it can be serial number is optional so though the stock is reduced but serial number is not captured while issuing so the stock at plant level is less but serial number is more,
If this is the case, reconciallation directly from tables will be difficult.
Regards
Sangeeta
Edited by: Sangeeta Khurana on May 4, 2011 12:34 AM

Single report showing stock and sale prices

Dear SD Wizards.
Am seeking to know if any standard report exists which would show me a the existing stock alongwith the valid selling price maintained for the item.
I do understand it's from two different areas and such instances are best through developed reports, but just trying and learning to know if there exists some report for this. This is a useflu info for the sales team, as most of you all would agree.
Thanks and regards,
Tariq

Sales price for material you can get from Tcode V/LD with pricing report as 15 - Material Price.
But you will not get current stock overview with it.
And yes, your understanding is correct. You might need to develop a Z report for the same.
Regards
JP

Stock and Values in Alternative Unit of Measure

Dear Experts,
Can anybody suggest me any Standard Report for Stock and Value in Alternative Unit of Measure.
Regards,
vgl
Edited by: vglokam on Aug 16, 2010 8:56 AM

Hi,
you cannot take stock report with alternate UoM. Alternate UoM is for "ORDERING" purpose only and not for SKU.
Arul

160 GB stock drive...can anyone report make and model number?

Although there may be more than one supplier to Apple of the 160 GB drive which is offered as a downgrade option, can anyone report back the make and model number of what they have received?
Thank you,
John

According to this posting
http://episteme.arstechnica.com/eve/forums/a/tpc/f/174096756/m/408003050831?r=73 6007850831#736007850831
the person indicates that they received a Seagate 7200.9 single platter.

PR and PO should be display in IWBK report for stock item.

Hi Exterts,
Our client requirement is to display PR and PO number in IWBK report for stock item as well.
I know PR and PO can be display in IWBK report for non-stock item but how we can display PR and PO for stock item,as PR is generated through MRP for stock item.
Please share your ideas on this.
Regards
Vishu

Vishu,
In typical MRP settings you "procure to stock" not "procure to order".
This means that there is no direct link between the PM/CS orders and any PR/POs created via MRP.
Subsequently you will not be able to show this data in IWBK.
However, we are currently designing a customer-specific report similar to IWBK that also counts the number of open POs for a given material on a PM/CS work order. The user can then navigate to ME2M (PO list) or MD04 (stock requirements list) to get further details.
PeteA

MB5B Report for Date Wise Stock and Value

Hi,
I am Taking MB5B Report for Date Wise Stock and Value.
But I have one doubt all stocks is coming or not in these report like Unrestrected Stock,Return Stock.Blocked stock,Transist stock,Restrected Stock,qty Inspection Stock.
I have another Doubt in these report three Stock type indicaters are there like these.
1.Storage Location / Batch Stock
2.valuated Stock
3.Special Stock.
But i have one doubt what is defferent these
1.Storage Location / Batch Stock
2.valuated Stock

Hi Prasad,
Yes MB5B report consider the Unrestricted, Quality, Blocked, Transit stock and restricted stock. Not sure about Return Stock.
If you select the Storage location/Batch stock radio button then the system will display all the possible stock from the storage location and the corresponding batch also.
If you select Valuated stock radio button then system will show only the valuated stock not the Non-valuated stock. Because Non-valuated material type is available in SAP system will not show those stock suppose if you select the Valuated stock radio button.
Regards
Karthick

Stock report with value and qauntity for given date not month wise

Hi gems,
can any body give me the standard report for Stock value and qauntity for given date not month wise at storage location level

Hi
check the report S_P00_07000139 with the option inventory and raw material report- detail and selection date (from, to date same). List will give opening & closing balances with goods movment and their values.
Thanks

Report for Reorder point, safety stock, current stock and fixed lot size

Hi,
Purchasing Dept. is looking for a report which can give list of materials falling below the reorder point, so that they can go ahead and create procurement proposals for those materials.
They also want to see the Reorder Point, Safety Stock, current stock and fixed lot size in the same report.
Let me know if there ia any standard report availbale which displays the same or any approach to get the same.
Thanks in Advance.
Regards,
Shankar Goud.

Hi,
There is no standard report because this is meant to be managed by the MRP run.
The MRP lists show all materials that have a problem (such as stock below reorderpoint) but MRP generates requirements for these anyway and so all you need to do is to look for the MRP generated requirements (requisitions?) and you have your list?
Are you using MRP?
If so then please use the standard functions in MRP to get this.
If not, then WHY NOT?
Steve B

Valuation class wise stock report for opening and closing stock

Dear all,
My Clint is asking the report for the opening stock and closing stock with respect to valuation class is there any standard report is available please guide me
regards
pramod

Dear sir,
in my case matarial is split valuated matarial, matarial is maintained with two valuation classes
when seeing the report MB5B its not showing the price valuation class vise, its showing combined together only, again i am using the MC.9 there also same problem its not showing both the valuation class vise price its showing only one valuation class price, if we check for another valuation class price for that particular matarial its telling no data is availabel for the valuation class
regards
pramod

Report on Total U/R stock and Open PO quantity

Dear Friends,
Is there any standard report or table which gives the present unrestricted usage stock and Open purchase order stock for all materials in a storage location or material group as selection instead of single material. If we can have open Puchase requisition quantity also in report then it will be more helpful.
Thanks for timely help ......
Best Regards
Varsit

Hello Varsit,
There is not stardard report available for this information, but you can link EKPO, EKBE (PO history) table and MARD table to get this information. For Purchase requisition, you can use EBAN table.
Hope this helps
Regards
Arif Mansuri

Custom Report for the Stock and Stock value for a specific date

Hi SAP Gurus,
Is there any SAP standard t-code or any logic to get the transcations (additions (for example: Purchases) and subtractions (Sales) to the inventory) for a particular materials in a plant and with Total Stock and also Total Stock value when that particular transaction happened?
Our system is R/3 4.7
I looked at the MB5B, MBCE, MBCA, MC44, MB51 and some other standard T-codes but could not find the total stock value at the time of Transaction happened.
The history tables MBEWH and MARDH are updated after the month end closing procedures, right, which means I will have the inventory value changing every month if material has Price "S".
Thank you,
-Harter

Hi Harter,
Unfortunately, you cannot see in a single tcode the value of stock and stock quantity on a specific date. As you yourself have pointed out, we only have to make use of the history table MBEWH, MARDH for the month wise stock quantity and value. Along with that you should also make use of the table MBEW to take teh stock quantity and value. So the total value of stock on a particular date will be
Stock qnty = MBEWH value until the previous month (for teh specific valuation class, period etc) + MBEW value for the present date.
But this will nto work out if you want to find out teh stock quantity and stock value on a past date basis. For past data, only m onthwise data is available. For this anyway you can refer to MC.1 and so on reports.

Report on current stock and safety stock

Hi,
I want to have the report on current stock and safety stock.
In MC.9 it gives wrong safety stock. When I go to cross check the safety stock in material master & in MC.9 I see differences.
Thanks,
Kiran

You can user tcode MC.9 or MC.5 to know valuated stock available at given plant. Stock lying in Returns (MB52) will not be a part of this report as it non-valuated stock.
The stock in the accounting view of the material master considers stock at plant level including stock in Transit (Intra & Inter plant stock trasnfers) & special stock like stock issued to vendor , consigment stock etc which is valuated at plant level.
whereas and stock in the plant stock view of the material master does not consider such special stocks hence there will always difference in both veiws.
For Physical stock as on particular date you can consider MB5B report with radio button "Storage location/Batch Stock" wherein you will get Quantity issued & Qunatity received in those SLOC along with Opening stock & Closing stock for the specified period.
use tcode
MBLB to know stock at vendor.
MB54 - Consignment Stock.

PO reporting that can capture PO number, PO value and cost center

Dear SAP expert and gurus,
Would like to seek for your professional advise and consult on which report in MM that can capture the PO number, PO value and cost center.
Kindly advise.
Thank you
Regards
Leonard Tan

ME80FN is a good report that captured the PO number and amount. However, the cost center is not being captured here. is there any suggestion?
ME2K is not an ideal report to user cause, user requires the data to be shown in one line instead of 2 to 3 line.
Is there any report like ME80FN can be captured PO number, PO value and Cost Center.
Thank you
Regards
Leonard Tan

PO,GR and IR number report

Dear All,
Is there any std report which gives GR and IR number for the respective PO's.
Regards

Hi
Go to T-CODE : ME2M here under scope of List select "ALLES " & execute here you will get report with GR & IR Number against PO,
Regards
Edited by: Ranganath Mysore on May 4, 2010 1:14 PM

Report on stock and serail number

Similar Messages

Maybe you are looking for