Report on Stock in storage bin

Dear Guru
My client wants a report where in MF60 they will get the required quantity to be transferred from raw storage location  to production location.They want a report in which the stock to be transferred  from raw storage location is in which storage bin.
Is there any standard report for this
regards
sam

Hi,
You can also use this report : LS26 to get an overview display per material.
Or you can use LS03n per WM,storage stpe, storage bin to get history.
Thanks
Silas

Similar Messages

  • No stock at storage bin level

    hello,
    during outbound delivery creation, we need to do picking though transfer order.  but the system cannot find stock at storage bin level....
    how can we create stock at storgare bin level ?
    regds
    pamela

    Please check the stock for that item in LS24. If exists note down the storage type.
    Check whether the Storage type search sequence exists for that particulare storage type in the TO by creating it manually. Create TO --> Click Storage type srch seq in the top and then check whether the storage type exists in the search. If not enter the storage type and push stock figures in the top and enter the qty needed and save it. Hope it helps.
    Edited by: Mohanaselvan Jayaraj on May 3, 2011 10:23 PM

  • T.code for viewing stock at storage bin

    Hi all,
    What is the t. code used for viewing the stock at storge bin?I know this is WM question but your help is appreciated.
    Regards,
    Shailendra

    Hi,
    Following are the T-Codes:
    LS26   Warehouse stocks per material
    LI05    Inventory History for Storage Bin
    LX02   Stock List
    LX03   Bin Status Report
    MB52  List fo warehouse stocks on hand
    Regards,
    Suresh' D.

  • Create the stock in storage bin level

    Hai all
         while i am doing transfer of order it is asking that storage unit type and the material stock is not maintained in storage bin .
    can anybody tell me how to maintain the stock in bin level .please help me is there any tcode for that
    regards
    satish

    Dear Satish
    A storage type generally contains several storage spaces or slots. These are called storage bins in Warehouse Management (WM). The storage bin is the smallest available unit of space in a warehouse. The storage bin therefore describes the position in the warehouse where the goods are or can be stored.
    Since the address of a storage bin is frequently derived from a coordinate system, a storage bin is often referred to as a coordinate. The coordinate 01-02-03 for example, can refer to a storage bin in row 1, stack 2, and level 3.
    You assign each storage bin to a specific warehouse number and storage type according to its location. You must also assign each storage bin to a storage section.
    You can also define the following additional characteristics of a storage bin:
             --> Maximum weight
             --> Total capacity
             --> Fire containment section
             --> Storage bin type (for example, for small or large pallets)
    With certain stock placement strategies, the storage bin type plays a significant role in optimizing the automatic search for a storage bin in connection with the pallet type. For example, you can define the WM putaway strategy to place large industrial pallets into a specific large bin type and smaller pallets into small bins.
    <i><b>For information on how to define storage bins, call up the Implementation Guide (IMG) for Warehouse Management and see under Master Data --> Storage Bins .</b></i>
    Generally speaking, you can use any combination of letters and numbers for a storage bin coordinate with the exception of certain alphanumeric characters that are used for stock placement strategy P (according to pallet or storage unit type).
    When goods are placed into storage, the system selects coordinates in ascending order according to specific sort criteria, and assigns the next available storage bin based on the coordinate structure you define for creating bins.
    Thanks
    G. Lakshmipathi

  • How to clear stock from storage bin and delete bins?

    Hi All
    For the development of prototype we have made some dummy warehouse structure and made stock movements with dummy bins. Now we wanted to go for real implementation. Before we made actual configurations, we wanted clear all dummy data. Can anyone suggest the standard process for clearing the stock, storage bins?
    Thanks
    Sasidhar Gupta

    Hi Sasidhar.
    is it non production system.
    If yes you can move all this stock in some other storage type as dummy with dummy name.
    and you can use all built as actuals.
    or do PI and remove all stock from system as not actual stock .
    and if its non production system then why are u worrying about all this. Let it be and start building your system as you require.
    Regards
    Suraj

  • List of stock by storage bin

    Hi,
    I need to display a list of materials by storage bin. How to display in this list the quantity and valuation of stock for each material and for each storage bin.
    Thanks for your comments and suggestions.

    Am not in front of the system, but if am right MBEW has fields called valuation area which is plant, matnr you should find in both tables.
    Check by doing the join of the said fields, if the system does not allow joins on MBEW table then use abap statements to read value.
    Hope the above helps.

  • WM::system is not placing the stock another storage bin

    hi friends
         system is not check fill the stock to another bin ..system is placing the stock in same bin...what are the cofiguration required?
    with regards
    dinesh
    Edited by: code acess on Jun 15, 2011 10:47 AM
    Edited by: code acess on Jun 15, 2011 10:48 AM

    hi SAP FC
                       Iam using putaway strategy is "L" ..storage is determing in the system ..every thing is working fine except placing  stock to another bin
    with regards
    dinesh
    Edited by: code acess on Jun 15, 2011 11:18 AM

  • Addition to stock in storage bin

    Hi,
    in the customizing LE-WM-Master data-Define Storage Type  I have defined for storage type 500 that addition to stock is not allowed, so all the bins created in this storage type are not going to allow addition to stock even though in materials master this indicator is marked?
    MY requirement is to not allow addition to stock to the bins if some material is placed in that bin even if there is available capacity, but this is true for 99% of the bins, meaning I need for 5 bins in particular, system allow addition to stock because I want to place in there 10 different materials that are really small compared to all other materials.
    How can I achieve this?
    Regards

    Hi Jürgen
    When thinking of this setting you told me everything will work perfec if it worked, but even if I put in the customizing of storage type Addition to stock "M"  and in the material master I mark the flag for addition to stock this does not work as spected, when I receive a PO with 2 materials on it, they go to 902, then I try to process the posting change notice but I get error no destination storage bin could be found in storage type XXX
    These 2 materials have the same storage section, and I have correctly defined a strategy to place accordingly this storage section,
    The current putaway is L next empty bin, and if I change to "I" addn to stock then system allows the putaway but just for one materials automatically, with the second one I still get the error but If I manually type the bin of the storage section then It allows putaway too.
    Can you explain what needs to be done to allow putaway of stock in a storage type wich is divided into 3 storage sections, 2 of them are assigned to two bins each (2X2=4), and the last storage section is linked only to one bin.
    The rare thing here is that in the first 2 storage section that have 2 bins each, I can put material on it only one palled on each bin, if for some reason only half pallet is placed, then no more stock can be placed there, How to check this capacities?
    And for last the strategy is that system tries to putaway first in storage section 1, if no empty bin then try in sto section 2, and if no empty bin there, then it should go to storage section 3 (wich has only one bin attached) but I want to make this bin like infinite capacity so if there is no room in the first two storage sections (4 bins) then it will go to the las storage section wich can allow addition to stock and mix storage.
    Please your inputs will be really appreciated

  • Move stock between storage bin

    Hello,
    We have some materials created in the past and are created in dummy storage bin.
    Now we need to move this materials to the correct storage bin. How can I do move X units from a storage bin to other storage bin. Create a TR between storages bin??
    Other question, how can I create manually with GR, a material in a storage bin, I mean how can associate a material to a storage bin.
    Thanks

    As per your statement I understand you are facing problem while TO creation through LT10. It seems you are getting destination bins which are blocked.
    Storage bins get blocked if there is an open inventory document.If you are looking for a specific bin which is blocked then clear the relevant inventory document. Also it is possible that due to some reason supervisor blocks specific bin ,you can see it in LS06 & unblock it.
    Hope this help you.
    Regards,
    Prashant

  • WM - Report for stock with storage time

    Hi Guru,
    How can I get a report with material_name, quantity, and their storage time?
    e.g. part A putaway on 2008/1/1,  100 EA
    The report will show:
    material    Qty          storage time
    part A     100 EA     (2008/12/10 - 2008/1/1)
    We want to find out the stock which have a long storage time - dead stock.
    Thanks,

    Hi,
    Information that comes from WM can be misleading. Even if you have the stock long ago, WM movements may happen within the WH for that material (and this does not mean IM movement but the quant-data in WM may change).
    I think you should consider the use of dead stock and slow moving stock reports (MC46 , MC50). MC.A report can also be used to get information on goods movements.
    Of course, depending on your WM strategy and processes you can extract the necessary information. E.g. in LX02 you can see the GR date, SLED/BBD, the already mentioned last movement, last removal, etc - check the layout.
    Regards,
    Csaba

  • How to remove storage bin stock

    our current client wants to empty out stock from storage bin. In inventory management there is no stock exist in storage location, but it is there in storage bin.
    Pls suggest ASAP

    Hey,
    Have a look at LX23 .. might be able to help ?!
    thanks,
    A
    Short text
    Stock Comparison Inventory Management / Warehouse Management
    Description
    Using this report you can generate an inventory comparison between the IM System (Inventory Management) and the WM System (Warehouse Management).
    On the selection screen, you can limit the area for comparison by entering the plant / storage location, plant / warehouse number or only the warehouse number.
    In addition to specifying the area, you can also determine the extent of information to be issued.  Here you have three options:
    1. "With bin inventory"
    In addition to generating the corresponding stock figures, you can also have a list of the corresponding WM bin quantities included.
    2. "All data on material"
    Even if only one difference occurs in one of the listed combinatations of material / batch / special stock indicator / supplier, all material combinations are listed. This can be very helpful when searching for errors.
    3. "Clear differences"
    If you mark this field, the system will generate a batch input session. By starting the batch input session, the differences to be cleared are removed in the IM system.  Negative WM stock figures and stock differences in returns will not be cleared.
    If you want to have a batch input file generated for the purpose of clearing the differences, it is important, for consistency reasons, that the materials in the respective warehouse are blocked in order that postings affecting stock figures can be prevented.
    CAREFUL: If you generate this session, all the material stocks belonging to the respective warehouse number are blocked completely, that is, for the duration of the program, no postings affecting the stock in the warehouse will be possible!
    Prerequisites
    The comparison is also possible for warehosue numbers managed on a decentralized basis.
    Output
    You receive a list with various materials. The list contains the following information, for example:
    The first line contains the plant, storage location, warehouse number, material number, total stock in inventory management, total stock in the warehouse, and the difference between the stocks.
    The following line contains the first combination of batch / special stock indicator / supplier (or sales document and item number for sales order stock) and stock category (Q,R,S, ), the stock figures in Inventory Management, in Warehouse Management, and the difference.
    If a batch input session is to be generated, the list contains a note in the log as to whether or not a session has been generated or behind the pushbutton "non-postable stocks", which materials could not be cleared because of negative stock figures or because they belong to returns stock.

  • Report for storage bins

    Hi gurus,
    Is there any standard report to see the storage bins report .It needs to show the storage bin,Material Number and Quantity in that storage bin.
    Please let me know is there such standard report.
            Points will be rewarded
    Its very very urgent... Please
             Thanks in Advance...
    Thanks and Regards
    Siri..

    Hi SIRI
    U can sse tables MARD and LAGP for getting the report output with the above mentioned fields.

  • Transferring of Storage Bins & Stock in newly Implemented Warehouse

    Dear all,
    I want to Transfer Storage Bins & Stock in newly Implemented Warehouse.
    Here IM is already there i.e there is stock in a IM.
    So please suggest.
    Regards,
    Rock

    Hi,
    Since you already have stock at IM level follow these steps:
    1. Create a dummy SLOC or use existing empty SLOC.
    2. Move stock to this SLOC using mvnt type 311
    3. Activate WM for current storage location,Deactivate TR creation for 311 mvt type in WM, uncheck negative stock for intrem storage type (922 or 921)
    4. Move stock back to WHS and create TOs using mvnt type 999 and transfer stock to respective storage bins. Since the storage bins are huge in number use LSMW tool to upload. Refer below link for better clarity.If the stock is in interim storage type transfer the stock to destination bins with 999 movement type. Thanking you.
    http://www.sap-img.com/warehouse/how-to-transfer-stock-to-storage-bin.htm
    Edited by: Padmasri Garapati on Oct 11, 2011 1:14 PM

  • Storage bin should display in MB52

    Hi All,
        Storage bin should display in MB52  T-code warehouse stock dispaly, Please guide me how it possible...
    Regards
    Hari

    Hi Hari,
    MB52 Tcode is only for display stock in Inventory Management Level/ storage location level. If you want display stock in storage bin level, you can use t-code :
    1. LX03   - Bin Status report
    2. LS26   - Total Stock per Material (Warehouse Management)
    3. LS24   - Bin Stock per Material
    I hope it can explain your problem.
    Pls rewards point if helpfull.
    Thanks
    Gunawan

  • What are the list of .stock by storage location

    hi, iwant to devlop the report to stock by storage location.give me description about a report to list of .stock by storage location. what are the functional spects for this report, what are the tables and fields we have to used for this report plz give me sample report.

    Dear Radha Krishna,
    You can either use program RMMMBESTN (from SE38) or TCode MMBE. However, you can copy the above program into a 'Z' program and change the logic if your requirement is not served by the standard report or you want to enhance the same.
    Go through standard Reports:
    MMBE Stock Overview
    MB52 List of Warehouse Stocks on Hand
    MB53 Display Plant Stock Availability
    MB54 Consignment Stocks
    MB5B Stocks for Posting Date
    MB5K Stock Consistency Check
    MB5L List of Stock Values: Balances
    MB5T Stock in transit CC
    MB5W List of Stock Values
    MBBS Display valuated special stock
    MBLB Stocks at Subcontractor
    MBSF Release Blocked Stock via Mat. Doc.
    MBW1 Special stocks via WWW
    MC.1 INVCO: Plant Anal. Selection: Stock
    MC.5 INVCO: SLoc Anal. Selection, Stock
    MC.9 INVCO: Material Anal.Selection,Stock
    MC.D INVCO: MRP Cntrllr.Anal.Sel. Stock
    MC.H INVCO: Business Area Anal.Sel. Stock
    MC.L INVCO: Mat.Group Analysis Sel. Stock
    MC.P INVCO: Division Analysis Sel. Stock
    MC.T INVCO: Mat.Type Anal.Selection Stock
    MC48 INVCO: Anal. of Current Stock Values
    MC49 INVCO: Mean Stock Values
    MC50 INVCO: Analysis of Dead Stock
    MC8M Read Opening Stocks
    MCB) INVCO: Long-Term Stock Selection
    MCC4 Set Up INVCO Info Structs.from Stock
    MCH: RIS: STRPS/Mvmts + Stock - Selection
    MCKJ Selection version tree: Stock
    MCKR User-spec. sel. vers. tree: Stock
    MCNB BW: Initialize Stock Balances
    MCSK Call Standard Analyses of Stocks
    MD04 Display Stock/Requirements Situation
    ME27 Create Stock Transport Order
    ME2O SC Stock Monitoring (Vendor)
    MF65 Stock Transfer for Reservation
    MI35 Batch Input: Post Zero Stock Balance
    MIQ1 Batch Input: PhInvDoc. Project Stock
    MM73 Special Stocks: Preparation
    MM74 Archive Special Stocks
    MM75 Display Archive of Special Stocks
    MMBE_OLD Stock Overview
    MMN1 Create Non-Stock Material &
    MS04 Planning Scenario: Stock/Reqmts List
    MS29 Calculate Sim. Initial Stock
    Tables:
    MKPF Header: Material Document
    MSEG Document Segment: Material
    IKPF Header: Physical Inventory Document
    ISEG Physical Inventory Document Items
    SBSE Stock Mngmt Levels for Inventory Sampling
    SKPF Header Data: Inventory Sampling
    SLGH Elements of Stock Population
    SSCH Strata of Inventory Sampling
    T156 Movement Type
    MSKA Sales Order Stock
    MSKAH Sales Order Stock: History
    MSKU Special Stocks with Customer
    MSKUH Special Stocks at Customer: History
    MSLB Special Stocks with Vendor
    MSLBH Special Stocks at Vendor: History
    MSPR Project Stock
    MSPRH Project Stock: History
    MSSAH Total Sales Order Stocks: History
    MSSL Total Special Stocks with Vendor
    MSSQ Project Stock Total
    MSSQH Total Project Stocks: History
    http://goldenink.com/abap/files_in_sap.html
    http://www.erpgenie.com/abap/tables.htm
    Regards,
    Naveen.

Maybe you are looking for