Report on Sync Status
Hi, I would like to know if its possible to get a report each day that shows the successful or unsuccessful status of the Software Update Point. I can see it in the console under Monitoring, but I really need an email sent to me on a daily basis
that reports this. I do realize that it will send me an email if it is unsuccessful, but for management/policy purposes, I need to show that successful sync every day.
Yes it is possible to do it will be a custom report. Once you create it you can use the SSRS email subscription service to get this email.
Keep in mind that I do work for Enahnsoft but I assume this is the type fo thing that you are looking for.
http://www.enhansoft.com/blog/junes-free-ssrs-report-is-list-of-wsus-sync-states-by-site
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ
Similar Messages
-
ISE 1.2 - Posture Detail Assessment - enforcement audit mode report not show status for non-compliant.
- For old version 1.1.4 it can be reported for non-compliant, How can I generate report for this?
Thanks
Kosin UsuwanthimIt used to be in there (id 226635 is the last one with it); should I clean it up a bit and put it back with a bit more of a disclaimer?
-
CUCM 8.6.2 LDAP User Delete Pending LDAP Sync Status Inactive
BE6K ver 8.6.2
Client has a user who recently got married. They changed her account information in Active Directtory to reflect her new last name. At that point CUCM shows her as
Delete Pending
LDAP Sync Status Inactive
CUC shows
LDAP User has been deleted.
The user still exists in both CUC and CUCM and is actively takign and receiving calls. User has VM access.
Shorrt of deleting the user in AD and recreating her, is there a way to force this to re-sync?
Thanks
MattThen that's expected to happen, for all purposes to CUCM/CUC eyes, msmith no longer exists and will be deleted, and a new user mjones now will be imported.
Depending on when the change was done and when CUCM detected this, it might take up to 48 hours maximum to delete the user
You'll need to associate everything to the new user, and also add that new user into CUC.
Or switch back her userID to the old one, and just change the surname for directory purposes.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk -
Hello Experts ,
Can you tell me the standard report for the status of PO as in GR qty , value , in voiced qty & value etc & open qty & value ??
Regardshi,
There is no direct report, but for a single material you can check the PO history from ME2N etc reports...
After executing the report there is the PO history tab...in it can see it individually...
But from the table you can see collectively...
Hope it helps..
Regards
Priyanka.P -
CJE0 - Reports to be able to report on 'system status'
Hi there,
Is there already an ability in CJE0 reports, or other reports, to be able to report on 'system status' (Project status) in the dynamic selections by another name? If not can we get it added as a field choice in the dynamic selections list?
Thank you,
BarbaraHi,
This thread will help you.
/message/5463977#5463977 [original link is broken]
Regards -
Hi;
I have a problem in GRC-PC I can't solve. My User is generating a 'Dashboard' report on the status of planned for the 1st quarter of 2014 (compliance controls), this controls not planned, but presented the control with status Submitted.
I appreciate any help...
Thanks all....
Regards....kaeandcolesmon,
If you open the recovery drive (partition) it should only have a single folder (Recovery).
To make sure that your not saving restore points to that drive.
See:
Start, Control Panel, System, System Protection tab. Make sure the D drive partition is set to OFF so that it does not save there.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus -
Need a report on delivery status and response status for capaign recipients
hi, i need to make a report on delivery status and response status for capaign recipients but cannot find them in the campaign subject area nor the campaign response subject area, any idea?
thanksCorrect the Campaign Response History is the report you are looking for. The fields that may be helpful to you are.
Response status - This shows message opened, click-thru's, opt outs etc
Delivery status - Hard bounce, soft bounce etc
To get more details from the above results add the following.
Response type - This will show the URL that was clicked on a click-thru in case you have multiple links tracked in one email. It will also show the reason for hard bounces. This is important because not all hard bounces will trigger the "Never Email" flag to be checked. This occurs for emails with the bounce statuses of Bad Address,
Address Moved or Unknown Address only. -
Multiple 'Reporting (Project Sync)' entries in Queue Jobs
We have a Project Server 2013 implementation that includes around 30 projects. We found, that "randomly" several entries of the job type 'Reporting (Project Sync)' are submitted at the same time (within a few minutes) into the queue. The exact
number seems to depend on the project, and varies typically between 20 and a few hundred entries. All of the entries are processed successfully, but I am not sure, if that behavior is by-design.
If it is not, what can be the cause of the malfunction? I have not found any queue-related error in the ULS logs (that are rather large, > 100 MB even with standard logging settings, when these entries are processed) / Windows log.
Note: If a project is published, only a single entry of the job type 'Reporting (Project Sync)' is submitted to the queue, and the job entry has an Owner. In the other, "random" cases, the entries have no Owner at all.
We have a front end server and an application server in the farm, the queue runs on the application server. If I enable verbose logging, the ULS log of the front end server is full with these entries (Area: Project Server, Category: Queue) as the jobs being
inserted in the queue:
PWA:http://ProjectServer/PWA, ServiceApp:ProjectServerApplication, User:PROJECTSERVER\system, PSI: [QUEUE] [SENDER] queue id ProjectQ: BeginMessageGroup(group id 47463124-c2e8-e411-80e5-005056b44e34, correlation id 30eedb25-66d1-e411-80e4-005056b44e34,
message type ReportingWSSSync, priority MediumLowPriority): JobUID: 43463124-c2e8-e411-80e5-005056b44e34 Project:30eedb25-66d1-e411-80e4-005056b44e34 Job:43463124-c2e8-e411-80e5-005056b44e34
PWA:http://ProjectServer/PWA, ServiceApp:ProjectServerApplication, User:PROJECTSERVER\system, PSI: [QUEUE] [SENDER] ProjectQ: Send( ProjectUID='30eedb25-66d1-e411-80e4-005056b44e34'. ForceFullSync='False'. SynchronizationType='Documents' ): ID: 1 GroupUID:
47463124-c2e8-e411-80e5-005056b44e34 Project:30eedb25-66d1-e411-80e4-005056b44e34 Job:43463124-c2e8-e411-80e5-005056b44e34
PWA:http://ProjectServer/PWA, ServiceApp:ProjectServerApplication, User:PROJECTSERVER\system, PSI: [QUEUE] [SENDER] ProjectQ: EndMessageGroup(): GroupUID: 47463124-c2e8-e411-80e5-005056b44e34 Project:30eedb25-66d1-e411-80e4-005056b44e34 Job:43463124-c2e8-e411-80e5-005056b44e34
PWA:http://ProjectServer/PWA, ServiceApp:ProjectServerApplication, User:PROJECTSERVER\system, PSI: successfully sent 1 job notifications to queue for site a04adc6f-5a3f-4209-9549-e3b28389df43 Project:30eedb25-66d1-e411-80e4-005056b44e34 Job:43463124-c2e8-e411-80e5-005056b44e34
Thanks a lot for any idea in advance!
Regards,
PeterWe have a Project Server 2013 implementation that includes around 30 projects. We found, that "randomly" several entries of the job type 'Reporting (Project Sync)' are submitted at the same time (within a few minutes) into the queue. The exact
number seems to depend on the project, and varies typically between 20 and a few hundred entries. All of the entries are processed successfully, but I am not sure, if that behavior is by-design.
If it is not, what can be the cause of the malfunction? I have not found any queue-related error in the ULS logs (that are rather large, > 100 MB even with standard logging settings, when these entries are processed) / Windows log.
Note: If a project is published, only a single entry of the job type 'Reporting (Project Sync)' is submitted to the queue, and the job entry has an Owner. In the other, "random" cases, the entries have no Owner at all.
We have a front end server and an application server in the farm, the queue runs on the application server. If I enable verbose logging, the ULS log of the front end server is full with these entries (Area: Project Server, Category: Queue) as the jobs being
inserted in the queue:
PWA:http://ProjectServer/PWA, ServiceApp:ProjectServerApplication, User:PROJECTSERVER\system, PSI: [QUEUE] [SENDER] queue id ProjectQ: BeginMessageGroup(group id 47463124-c2e8-e411-80e5-005056b44e34, correlation id 30eedb25-66d1-e411-80e4-005056b44e34,
message type ReportingWSSSync, priority MediumLowPriority): JobUID: 43463124-c2e8-e411-80e5-005056b44e34 Project:30eedb25-66d1-e411-80e4-005056b44e34 Job:43463124-c2e8-e411-80e5-005056b44e34
PWA:http://ProjectServer/PWA, ServiceApp:ProjectServerApplication, User:PROJECTSERVER\system, PSI: [QUEUE] [SENDER] ProjectQ: Send( ProjectUID='30eedb25-66d1-e411-80e4-005056b44e34'. ForceFullSync='False'. SynchronizationType='Documents' ): ID: 1 GroupUID:
47463124-c2e8-e411-80e5-005056b44e34 Project:30eedb25-66d1-e411-80e4-005056b44e34 Job:43463124-c2e8-e411-80e5-005056b44e34
PWA:http://ProjectServer/PWA, ServiceApp:ProjectServerApplication, User:PROJECTSERVER\system, PSI: [QUEUE] [SENDER] ProjectQ: EndMessageGroup(): GroupUID: 47463124-c2e8-e411-80e5-005056b44e34 Project:30eedb25-66d1-e411-80e4-005056b44e34 Job:43463124-c2e8-e411-80e5-005056b44e34
PWA:http://ProjectServer/PWA, ServiceApp:ProjectServerApplication, User:PROJECTSERVER\system, PSI: successfully sent 1 job notifications to queue for site a04adc6f-5a3f-4209-9549-e3b28389df43 Project:30eedb25-66d1-e411-80e4-005056b44e34 Job:43463124-c2e8-e411-80e5-005056b44e34
Thanks a lot for any idea in advance!
Regards,
Peter -
FIM Reporting initial sync running long time
We have installed FIM Reporting last month , afterwards our FIM reporting initial sync powershell script is running from last month to Sync FIM data with SCSM server , but still only half data is synced with SCSM server ,
we have 4 server
1. Server1 --FIM server
2. Server2 -- FIM database
2. Server3 -- SCSM service manager and SQL server Databases for Service manager and Data warehouse
4. Server4 -- Data warehouse server
As FIM initial sync script is taking long time to sync so we found some errors in Server 4 (Data warehouse server) multiple times during ETL jobs running.
Error screen shot
Please give some suggestions to make FIM initial sync fasterPlease try Resume-FIMReportingInitialSync instead of starting initial sync once again.
Sadly Initial Sync is very long and even on test environments it can take a long time.
But it seems that data from FIM was successfully moved to reporting database, but it hasn't been calculated by Service Manager correctly between its databases.
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer. -
Is there an "about:sync" status page displaying information such as
- number of devices active on the account
- when each device was last syncedYou can go to about:sync-tabs to see a list of other devices that have tab sync enabled.
-
I want to use spiceworks to report on the status of bitlocker across multiple
I want to use spiceworks to report on the status of bitlocker across multiple customer sites and domains, I didn't want to use MBAM as it is complicated and I just wanted to report if bitlocker was enabled or not.
There have been a lot of discussions but I was looking for some thoughts and experiences that were concise on the whole process ie how to implement spiceworks across multiple sites, and then into the reporting. Or is that too much to ask in one discussion?
Thanks!
This topic first appeared in the Spiceworks CommunityIf you are talking abount the ID is Settings>iCloud you will have to get the persions to give you the ID andpassword or get them to remove the iPod from their account
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
also see:
iCloud: Find My iPhone Activation Lock in iOS 7 -
SPA112 / SPA122 Report Rule - Delta / Status outputs
Hi,
I've been playing with the Report Rule and the documentation is not very clear when it comes to the two report options: --delta and --status
If I set the Report Rule to [--status]http://myserver/posthandler.php, I see the request coming in but the content of the POST is the actual config file (flat-profile) instead of the status (flat-status). Same goes when using the --delta
I am using 1.3.1 to test but I am sure 1.3.2 is probably not working as well.
Have anyone ever been able to generate a delta and/or get the content of the ATA status.xml file? I can get it from the URL (http://my_ata_ip/admin/status.xml) but would be neat to get it remotely too.
Thanks,
BenoitI assume you are following Cisco SPA112, SPA122, SPA232D Analog Telephone Adapters Provisioning Guide
I see no --status nor --delta modifiers mentioned in Report_Rule option description. Just --key modifier is described here.
It seems that neither --status nor --delta modifiers are supported on SPA1[12]2.
As far as I know, status and delta reports are supported on SPA IP Phones (e.g. SPA[35]xx) only. The --delta is supported from 7.4.9c firmware onward, the --status has been introduced with 7.5.3 version. See Cisco Small Business IP Telephony Provisioning Guide for more information related to provisioning of this product line devices..
Rate useful responses. It will help others to found solutions. -
SCCM 2012 monitoring - Site Status - Reporting Services Point - Status Critical
Hi all,
I have noticed that the Site Status under Monitoring shows Reporting services point as in Critical state though we do not see anything wrong with SCCM as such (at least we haven't been reported any problems thus far). There is nothing in the event viewer
on SQL Server. Just wanted to know how to resolve this issue. Could you help?
When I try to open status messages for Reporting Services (for any days) it does not return anything as if there are no status messages for this role. Also, could you let me know the log file locations/names for Reporting services point?Here it is... I have replaced server names with a dummy name.
=================
Reporting Services URL from Registry [http://SCCMSQLSERVER/ReportServer/ReportService2005.asmx]~ $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:23:31.588-60><thread=6072 (0x17B8)>
Reporting Services is running $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:23:31.596-60><thread=6072 (0x17B8)>
Retrieved datasource definition from the server. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:23:31.616-60><thread=6072 (0x17B8)>
Confirmed version [10.50.4000.0] for the Sql Srs Instance. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:23:31.641-60><thread=6072 (0x17B8)>
Retrieved datasource definition from the server. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:23:31.686-60><thread=6072 (0x17B8)>
Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ConfigMgr_PRI $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:23:31.686-60><thread=6072 (0x17B8)>
Loading localization resources from directory [F:\SMS_SRSRP\SrsResources.dll] $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:23:31.713-60><thread=6072 (0x17B8)>
Looking for 'English (United Kingdom)' resources $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:23:31.715-60><thread=6072 (0x17B8)>
Looking for 'English' resources $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:23:31.716-60><thread=6072 (0x17B8)>
Found resources for 'English' $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:23:31.716-60><thread=6072 (0x17B8)>
Next security configuration at [02/09/2014 13:31:30] $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:23:32.338-60><thread=6072 (0x17B8)>
Root Folder exists $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:23:32.338-60><thread=6072 (0x17B8)>
Successfully checked that the SRS web service is healthy on server SCCMSQLSERVER.DOMAIN~ $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:23:32.338-60><thread=6072 (0x17B8)>
~Waiting for changes for 1 minutes $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:23:32.339-60><thread=6072 (0x17B8)>
Timed Out...~ $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:24:32.336-60><thread=6072 (0x17B8)>
Reporting Services URL from Registry [http://SCCMSQLSERVER/ReportServer/ReportService2005.asmx]~ $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:24:32.347-60><thread=6072 (0x17B8)>
Reporting Services is running $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:24:32.357-60><thread=6072 (0x17B8)>
Retrieved datasource definition from the server. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:24:32.377-60><thread=6072 (0x17B8)>
Confirmed version [10.50.4000.0] for the Sql Srs Instance. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:24:32.404-60><thread=6072 (0x17B8)>
Retrieved datasource definition from the server. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:24:32.451-60><thread=6072 (0x17B8)>
Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ConfigMgr_PRI $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:24:32.451-60><thread=6072 (0x17B8)>
Loading localization resources from directory [F:\SMS_SRSRP\SrsResources.dll] $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:24:32.478-60><thread=6072 (0x17B8)>
Looking for 'English (United Kingdom)' resources $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:24:32.480-60><thread=6072 (0x17B8)>
Looking for 'English' resources $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:24:32.481-60><thread=6072 (0x17B8)>
Found resources for 'English' $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:24:32.481-60><thread=6072 (0x17B8)>
Next security configuration at [02/09/2014 13:31:30] $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:24:33.160-60><thread=6072 (0x17B8)>
Root Folder exists $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:24:33.161-60><thread=6072 (0x17B8)>
Successfully checked that the SRS web service is healthy on server SCCMSQLSERVER.DOMAIN~ $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:24:33.161-60><thread=6072 (0x17B8)>
~Waiting for changes for 1 minutes $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:24:33.161-60><thread=6072 (0x17B8)>
Timed Out...~ $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:25:33.159-60><thread=6072 (0x17B8)>
Reporting Services URL from Registry [http://SCCMSQLSERVER/ReportServer/ReportService2005.asmx]~ $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:25:33.168-60><thread=6072 (0x17B8)>
Reporting Services is running $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:25:33.188-60><thread=6072 (0x17B8)>
Retrieved datasource definition from the server. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:25:33.237-60><thread=6072 (0x17B8)>
Confirmed version [10.50.4000.0] for the Sql Srs Instance. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:25:33.264-60><thread=6072 (0x17B8)>
Retrieved datasource definition from the server. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:25:33.462-60><thread=6072 (0x17B8)>
Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ConfigMgr_PRI $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:25:33.462-60><thread=6072 (0x17B8)>
Loading localization resources from directory [F:\SMS_SRSRP\SrsResources.dll] $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:25:33.539-60><thread=6072 (0x17B8)>
Looking for 'English (United Kingdom)' resources $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:25:33.541-60><thread=6072 (0x17B8)>
Looking for 'English' resources $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:25:33.542-60><thread=6072 (0x17B8)>
Found resources for 'English' $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:25:33.542-60><thread=6072 (0x17B8)>
Next security configuration at [02/09/2014 13:31:30] $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:25:34.796-60><thread=6072 (0x17B8)>
Root Folder exists $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:25:34.797-60><thread=6072 (0x17B8)>
Successfully checked that the SRS web service is healthy on server SCCMSQLSERVER.DOMAIN~ $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:25:34.797-60><thread=6072 (0x17B8)>
~Waiting for changes for 1 minutes $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:25:34.797-60><thread=6072 (0x17B8)>
Timed Out...~ $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:26:34.795-60><thread=6072 (0x17B8)>
Reporting Services URL from Registry [http://SCCMSQLSERVER/ReportServer/ReportService2005.asmx]~ $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:26:34.804-60><thread=6072 (0x17B8)>
Reporting Services is running $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:26:34.813-60><thread=6072 (0x17B8)>
Retrieved datasource definition from the server. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:26:34.834-60><thread=6072 (0x17B8)>
Confirmed version [10.50.4000.0] for the Sql Srs Instance. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:26:34.859-60><thread=6072 (0x17B8)>
Retrieved datasource definition from the server. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:26:34.904-60><thread=6072 (0x17B8)>
Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ConfigMgr_PRI $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:26:34.905-60><thread=6072 (0x17B8)>
Loading localization resources from directory [F:\SMS_SRSRP\SrsResources.dll] $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:26:34.940-60><thread=6072 (0x17B8)>
Looking for 'English (United Kingdom)' resources $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:26:34.942-60><thread=6072 (0x17B8)>
Looking for 'English' resources $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:26:34.943-60><thread=6072 (0x17B8)>
Found resources for 'English' $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:26:34.943-60><thread=6072 (0x17B8)>
Next security configuration at [02/09/2014 13:31:30] $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:26:35.724-60><thread=6072 (0x17B8)>
Root Folder exists $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:26:35.725-60><thread=6072 (0x17B8)>
Successfully checked that the SRS web service is healthy on server SCCMSQLSERVER.DOMAIN~ $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:26:35.725-60><thread=6072 (0x17B8)>
~Waiting for changes for 1 minutes $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:26:35.726-60><thread=6072 (0x17B8)>
Timed Out...~ $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:27:35.723-60><thread=6072 (0x17B8)>
Reporting Services URL from Registry [http://SCCMSQLSERVER/ReportServer/ReportService2005.asmx]~ $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:27:35.731-60><thread=6072 (0x17B8)>
Reporting Services is running $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:27:35.752-60><thread=6072 (0x17B8)>
Retrieved datasource definition from the server. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:27:35.776-60><thread=6072 (0x17B8)>
Confirmed version [10.50.4000.0] for the Sql Srs Instance. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:27:35.813-60><thread=6072 (0x17B8)>
Retrieved datasource definition from the server. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:27:35.902-60><thread=6072 (0x17B8)>
Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ConfigMgr_PRI $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:27:35.902-60><thread=6072 (0x17B8)>
Loading localization resources from directory [F:\SMS_SRSRP\SrsResources.dll] $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:27:35.954-60><thread=6072 (0x17B8)>
Looking for 'English (United Kingdom)' resources $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:27:35.956-60><thread=6072 (0x17B8)>
Looking for 'English' resources $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:27:35.957-60><thread=6072 (0x17B8)>
Found resources for 'English' $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:27:35.957-60><thread=6072 (0x17B8)>
Next security configuration at [02/09/2014 13:31:30] $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:27:36.728-60><thread=6072 (0x17B8)>
Root Folder exists $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:27:36.729-60><thread=6072 (0x17B8)>
Successfully checked that the SRS web service is healthy on server SCCMSQLSERVER.DOMAIN~ $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:27:36.729-60><thread=6072 (0x17B8)>
~Waiting for changes for 1 minutes $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:27:36.730-60><thread=6072 (0x17B8)>
Timed Out...~ $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:28:36.727-60><thread=6072 (0x17B8)>
Reporting Services URL from Registry [http://SCCMSQLSERVER/ReportServer/ReportService2005.asmx]~ $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:28:36.738-60><thread=6072 (0x17B8)>
Reporting Services is running $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:28:36.747-60><thread=6072 (0x17B8)>
Retrieved datasource definition from the server. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:28:36.769-60><thread=6072 (0x17B8)>
Confirmed version [10.50.4000.0] for the Sql Srs Instance. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:28:36.799-60><thread=6072 (0x17B8)>
Retrieved datasource definition from the server. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:28:36.848-60><thread=6072 (0x17B8)>
Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ConfigMgr_PRI $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:28:36.848-60><thread=6072 (0x17B8)>
Loading localization resources from directory [F:\SMS_SRSRP\SrsResources.dll] $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:28:36.875-60><thread=6072 (0x17B8)>
Looking for 'English (United Kingdom)' resources $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:28:36.878-60><thread=6072 (0x17B8)>
Looking for 'English' resources $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:28:36.878-60><thread=6072 (0x17B8)>
Found resources for 'English' $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:28:36.878-60><thread=6072 (0x17B8)>
Next security configuration at [02/09/2014 13:31:30] $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:28:37.496-60><thread=6072 (0x17B8)>
Root Folder exists $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:28:37.497-60><thread=6072 (0x17B8)>
Successfully checked that the SRS web service is healthy on server SCCMSQLSERVER.DOMAIN~ $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:28:37.497-60><thread=6072 (0x17B8)>
~Waiting for changes for 1 minutes $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:28:37.497-60><thread=6072 (0x17B8)>
Timed Out...~ $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:29:37.494-60><thread=6072 (0x17B8)>
Reporting Services URL from Registry [http://SCCMSQLSERVER/ReportServer/ReportService2005.asmx]~ $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:29:37.503-60><thread=6072 (0x17B8)>
Reporting Services is running $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:29:37.512-60><thread=6072 (0x17B8)>
Retrieved datasource definition from the server. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:29:37.534-60><thread=6072 (0x17B8)>
Confirmed version [10.50.4000.0] for the Sql Srs Instance. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:29:37.563-60><thread=6072 (0x17B8)>
Retrieved datasource definition from the server. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:29:37.610-60><thread=6072 (0x17B8)>
Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ConfigMgr_PRI $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:29:37.610-60><thread=6072 (0x17B8)>
Loading localization resources from directory [F:\SMS_SRSRP\SrsResources.dll] $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:29:37.646-60><thread=6072 (0x17B8)>
Looking for 'English (United Kingdom)' resources $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:29:37.648-60><thread=6072 (0x17B8)>
Looking for 'English' resources $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:29:37.653-60><thread=6072 (0x17B8)>
Found resources for 'English' $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:29:37.654-60><thread=6072 (0x17B8)>
Next security configuration at [02/09/2014 13:31:30] $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:29:38.352-60><thread=6072 (0x17B8)>
Root Folder exists $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:29:38.353-60><thread=6072 (0x17B8)>
Successfully checked that the SRS web service is healthy on server SCCMSQLSERVER.DOMAIN~ $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:29:38.353-60><thread=6072 (0x17B8)>
~Waiting for changes for 1 minutes $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:29:38.353-60><thread=6072 (0x17B8)>
Timed Out...~ $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:30:38.351-60><thread=6072 (0x17B8)>
Reporting Services URL from Registry [http://SCCMSQLSERVER/ReportServer/ReportService2005.asmx]~ $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:30:38.361-60><thread=6072 (0x17B8)>
Reporting Services is running $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:30:38.370-60><thread=6072 (0x17B8)>
Retrieved datasource definition from the server. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:30:38.393-60><thread=6072 (0x17B8)>
Confirmed version [10.50.4000.0] for the Sql Srs Instance. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:30:38.432-60><thread=6072 (0x17B8)>
Retrieved datasource definition from the server. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:30:38.484-60><thread=6072 (0x17B8)>
Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ConfigMgr_PRI $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:30:38.485-60><thread=6072 (0x17B8)>
Loading localization resources from directory [F:\SMS_SRSRP\SrsResources.dll] $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:30:38.520-60><thread=6072 (0x17B8)>
Looking for 'English (United Kingdom)' resources $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:30:38.522-60><thread=6072 (0x17B8)>
Looking for 'English' resources $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:30:38.530-60><thread=6072 (0x17B8)>
Found resources for 'English' $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:30:38.531-60><thread=6072 (0x17B8)>
Next security configuration at [02/09/2014 13:31:30] $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:30:39.270-60><thread=6072 (0x17B8)>
Root Folder exists $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:30:39.270-60><thread=6072 (0x17B8)>
Successfully checked that the SRS web service is healthy on server SCCMSQLSERVER.DOMAIN~ $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:30:39.271-60><thread=6072 (0x17B8)>
~Waiting for changes for 1 minutes $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:30:39.271-60><thread=6072 (0x17B8)>
Timed Out...~ $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:39.268-60><thread=6072 (0x17B8)>
Reporting Services URL from Registry [http://SCCMSQLSERVER/ReportServer/ReportService2005.asmx]~ $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:39.277-60><thread=6072 (0x17B8)>
Reporting Services is running $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:39.286-60><thread=6072 (0x17B8)>
Retrieved datasource definition from the server. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:39.308-60><thread=6072 (0x17B8)>
Confirmed version [10.50.4000.0] for the Sql Srs Instance. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:39.334-60><thread=6072 (0x17B8)>
Retrieved datasource definition from the server. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:39.380-60><thread=6072 (0x17B8)>
Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ConfigMgr_PRI $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:39.381-60><thread=6072 (0x17B8)>
Loading localization resources from directory [F:\SMS_SRSRP\SrsResources.dll] $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:39.421-60><thread=6072 (0x17B8)>
Looking for 'English (United Kingdom)' resources $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:39.423-60><thread=6072 (0x17B8)>
Looking for 'English' resources $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:39.424-60><thread=6072 (0x17B8)>
Found resources for 'English' $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:39.424-60><thread=6072 (0x17B8)>
Confirmed the configuration of SRS role [ConfigMgr Report Users]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:40.088-60><thread=6072 (0x17B8)>
Confirmed the configuration of SRS role [ConfigMgr Report Administrators]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:40.098-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:40.700-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:40.736-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Asset Intelligence]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:40.758-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Compliance and Settings Management]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:40.791-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Administrative Security]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:40.815-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Operating System]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:40.849-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Software Updates - A Compliance]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:40.870-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Software Updates - B Deployment Management]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:40.906-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Software Updates - C Deployment States]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:40.929-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Software Updates - D Scan]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:40.961-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Software Updates - E Troubleshooting]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:40.998-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Driver Management]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.033-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Task Sequence - Deployment Status]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.067-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Task Sequence - Deployments]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.099-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Task Sequence - Progress]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.127-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Task Sequence - References]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.155-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/State Migration]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.192-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Software Distribution - Application Monitoring]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.221-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Virtual Applications]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.265-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Software Distribution - Package and Program Deployment Status]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.303-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Software Distribution - Package and Program Deployment]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.326-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/User - Device Affinity]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.362-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Software Metering]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.381-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Status Messages]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.413-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Migration]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.432-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Device Management]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.470-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Status Messages - Audit]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.495-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Alerts]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.529-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Client Status]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.551-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Client Push]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.585-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - CD-ROM]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.609-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - Disk]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.642-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - General]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.666-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - Memory]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.700-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - Modem]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.724-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - Network Adapter]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.755-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - Processor]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.778-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - SCSI]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.815-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - Sound Card]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.835-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - Video Card]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.867-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Site - Client Information]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.888-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Site - Discovery and Inventory Information]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.924-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Site - General]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.952-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Site - Server Information]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:41.985-60><thread=6072 (0x17B8)>
The security policy for folder [/ConfigMgr_PRI/Network Access Protection] is out of sync. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.007-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Network Access Protection]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.042-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Power Management]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.073-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Wake On LAN]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.096-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Network]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.132-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Software - Files]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.156-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Software - Companies and Products]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.189-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Users]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.209-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Software Distribution - Collections]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.243-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Software Distribution - Content]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.268-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Out Of Band Management]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.298-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Endpoint Protection]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.320-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Status Messages/Status Messages - Hidden]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.349-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Endpoint Protection/Endpoint Protection - Hidden]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.367-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Software Distribution - Application Monitoring/Software Distribution - Application Monitoring - Hidden]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.397-60><thread=6072 (0x17B8)>
The security policy for folder [/ConfigMgr_PRI/Network Access Protection] is out of sync. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.418-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Network Access Protection]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.458-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Replication Traffic]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.492-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Upgrade Assessment]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.511-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/User Data and Profiles Health]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.542-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.571-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.599-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Asset Intelligence]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.632-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Compliance and Settings Management]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.656-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Administrative Security]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.689-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Operating System]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.709-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Software Updates - A Compliance]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.742-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Software Updates - B Deployment Management]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.767-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Software Updates - C Deployment States]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.800-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Software Updates - D Scan]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.822-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Software Updates - E Troubleshooting]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.856-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Driver Management]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.880-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Task Sequence - Deployment Status]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.911-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Task Sequence - Deployments]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.932-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Task Sequence - Progress]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.966-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Task Sequence - References]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:42.988-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/State Migration]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.020-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Software Distribution - Application Monitoring]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.045-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Virtual Applications]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.078-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Software Distribution - Package and Program Deployment Status]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.113-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Software Distribution - Package and Program Deployment]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.137-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/User - Device Affinity]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.170-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Software Metering]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.193-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Status Messages]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.227-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Migration]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.247-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Device Management]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.280-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Status Messages - Audit]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.306-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Alerts]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.339-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Client Status]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.361-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Client Push]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.395-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - CD-ROM]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.415-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - Disk]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.445-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - General]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.467-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - Memory]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.497-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - Modem]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.518-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - Network Adapter]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.550-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - Processor]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.570-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - SCSI]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.602-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - Sound Card]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.625-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Hardware - Video Card]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.655-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Site - Client Information]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.676-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Site - Discovery and Inventory Information]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.710-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Site - General]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.731-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Site - Server Information]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.762-60><thread=6072 (0x17B8)>
The security policy for folder [/ConfigMgr_PRI/Network Access Protection] is out of sync. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.785-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Network Access Protection]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.821-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Power Management]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.852-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Wake On LAN]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.878-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Network]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.899-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Software - Files]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.933-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Software - Companies and Products]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.967-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Users]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:43.994-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Software Distribution - Collections]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:44.027-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Software Distribution - Content]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:44.052-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Out Of Band Management]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:44.084-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Endpoint Protection]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:44.106-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Status Messages/Status Messages - Hidden]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:44.135-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Endpoint Protection/Endpoint Protection - Hidden]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:44.153-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Software Distribution - Application Monitoring/Software Distribution - Application Monitoring - Hidden]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:44.186-60><thread=6072 (0x17B8)>
The security policy for folder [/ConfigMgr_PRI/Network Access Protection] is out of sync. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:44.209-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Network Access Protection]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:44.250-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Replication Traffic]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:44.284-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/Upgrade Assessment]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:44.304-60><thread=6072 (0x17B8)>
Confirmed the security policy for folder [/ConfigMgr_PRI/User Data and Profiles Health]. $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:44.338-60><thread=6072 (0x17B8)>
Root Folder exists $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:44.339-60><thread=6072 (0x17B8)>
Successfully checked that the SRS web service is healthy on server SCCMSQLSERVER.DOMAIN~ $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:44.339-60><thread=6072 (0x17B8)>
~Waiting for changes for 1 minutes $$<SMS_SRS_REPORTING_POINT><09-02-2014 13:31:44.339-60><thread=6072 (0x17B8)> -
Reporting Services Point status message errors.
My Reporting Services Point seems to work OK -all reports are available and run correctly both through the console and via the website. However, I am seeing the following warning in the SMS_SRS_REPORTING_POINT status messages every hour:
"The SQL Reporting Services datasource on Reporting point server "Databaseserver.contoso.com" is missing or has been changed outside of Configuration Manager. It will be rebuilt based on the RSP configuration."
Here's what I think is causing the issue, but I don't know how to solve it.
The reports database is on the same remote SQL server as my site database. Because these site systems were installed automatically through the SCCM installation process, they show up in the Servers and Site Systems Role without an intranet FQDN. However,
when I add the RSP to the database server, it creates a new entry because when manually adding site systems SCCM insists on automatically adding the intranet FQDN. So I now have two separate entries for the same server:
\\DBServer01 - component server, site database server, site system
\\DBServer01.contoso.com - component server, reporting services point, site system
Any thoughts on how to stop these errors?Yes, I know this is an old post, but I’m trying to clean them up.
In the past when I have seen this, they will automatically clean themselves up after a few days. (aka up to a week later). Have it clean itself up yet?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
Does anyone have a daily report for system status?
Basically, I am looking for an automated daily report to give me the status of jobs and workflows. I am having a hard time finding the talbes and relationships for all the jobs, workflows, and tasks in the CMDB.
Once I know where to find all the pieces, I can take it from there.Sounds like a job for OpsMgr.
- Get on the floor, do that dinosaur
Maybe you are looking for
-
Help! coloring background one row for 3 seconds in JTable with SwingTimer
Hi, I am struggling with this for the past three days but cannot come up with a solution. I have a JTable and when i insert a new Row, i want to give that row a backgroundcolor for 3 seconds/ or let it blink for 3 seconds and then let it return to it
-
PROBLEM REGARDING GUI_DOWNLOAD IN .TDF FORMAT
hi , i am append the data into one internal table (iresult) . and internal table contain data row by row . when data is downloaded into destop it is storing in .TDF FILE FORMAT IS NOT DOWNLOADING IN .TDF FORMAT FILE AS IN FORMAT OF INTERNAL TABLES L
-
Converting a Word document with form fields to become a form fillable PDF file with email
We are trying to convert a number of word(97,and 2000) documents but it never works correctly. The converted PDF file is missing fields and the fields it does convert is one character long. The idea was to have LiveCycle just convert it without anyon
-
HI All, Is there a metric to know about the read write overhead in Arch Vs Windows 7. I am wondering how to quantify it as I am concerned that Linux has way too much disk read write load. Also I have a laptop with 4GB ram and just a 60 GB SSD, how ca
-
Hi All, I am unable create activity while creating DC. I have NWDI Developer role it has the required UME Actions. So I thought to add privileges to the ACL. When I am try to add the permissions to the track as per following sap help link (Step 5) th