Report on Technical Content

Hi BW BeX Gurus,
   Daily we have dataloads for 8 hrs. After the dataloads we prepare a checklist by going into Manage Datatargets screen for each datatarget(Cubes and ODS's),then we note down number of records transferred and added . This is how we do it MANUALLY on daily basis.
This is quite lenghty process.
   Now can we automate the above process by creating
a report one at a shot to get all the transfered/added records for all the datatargets loaded with data on daily basis ?
   Is it possible by creating a query over Technical statistics cube? If there are anyother solutions Please
let me know.
Cheers
Thx in Advance
Rajesh

Hi,
A customised tool using ABAP is very much possible to develop. But I would suggets its better to get details from the tables that have the informations on data load instead of the Technical Content Cube.
Check tables like:
RSDDSTATWHM , RSREQDONE.
This tool can have features like:
1. User can give the datasource name or Infosource name or Data target name or a date range or just a single date to get a report on the data load details like the Infopackage name, datasource name, type of load, number of records loaded, status of the load, process chain name if that infopackage is within a process chain, start time of the load, finish time of the load etc.
2. You can use this tool everyday even for monitoring the any data load to know the complete information related to a data load based on the input criteria mentioned in point 1.
One more solution is to use RSDDSTAT* tables data to be loaded into Technical Copntent cube and use BEx for reporting for this cube.
assign points if useful ***
Thanks,
Raj

Similar Messages

Slow Moving Item Scenario - Technical content for Queries

Hello
Due to preparations for upgrade to BW 7.30 we would make an analysis of not or seldom used BEx reports (queries, workbooks, etc.)
All of unused objects should be deleted in advance of an upgrade.
I checked if there is a query which shows slow moving items for queries.
Is there any technical content (query) which reports this scenario for BEx objects?
Thanks for any advise.

follow steps in this doc:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/11291595-0501-0010-c881-e02c27261b55

Urgent-Issue with Technical Content.

Hi experts,
we have activated the technical content.Now we are Initilize and run deltas with Process Chain.
Under one of the Infosource loading the datatarget(0BWTC_C02),i have the following standard delivered infopackages
1) Delta - OLAP Transaction Data
2) OLAP Transaction Data Initialization
3) OLAP Transaction Data: Delta Initialization
4) Transaction Data OLAP - Delta
5) Transaction Data OLAP - Delta Initialization
I have checked all these infopackages,i dont see any difference when i tried to compare the selection conditions and datatargets.
Now my question is
1) How do i select which infopackage should be in the process chains?
2) Also do we need to create and delete indexes for the technical content cubes too?
Please advise
thanks in advance
kiran

Hi sunil,
I appreciate your reply.
Issue 1:My question was as i have 5 Standard infopackages with no differences.If you see my first posting.How should i consider which infopackage to choose for in my Process Chain?
Ex: As i see 3 Init Infopackages witht he same name.How should choose which onfopackage to include for the process chain?
Also i see 2 delta infopackages witht almost the similar name.How should i consider which infopackage to include for the process chain.
Issue 2: I do understand that indexes are deleted before loading data for better loading performance and then indexes are created for reporting perfomances.
But my question was do we have to create/delete indexes for Technical content too.What is the recommended solution?What are the Pros and Cons?
Hope i am clear with my questions this time.
thanks in advance
kiran

Variable in technical content

Hi all,
In the TECHNICAL CONTENT of my system I have a variable for the Exchange Rate Type (0RTYPE)called Z_RTYPE. When I run a query that use the currency conversion type this variable pops up in the variable screen, but it is not specifically added to my query.
Because this is not added to my query I cannot see this variable in the "Query Properties", which I need to be able to sort it.
Is there some way to add this variable from the technical content to my query?
Best regards,
TMV

Hi Pank,
For all the Queries/Workbooks for which you want to collect Stats and see them in Reports, you have to activate or mark them/relevant Infoproviders in Datawarehousing Workbench.Tools> BI Statistics Settings.
For the new statistics, you have to determine the objects for which you want to update the statistics and to what level of detail. You call this dialog from the Data Warehousing Workbench. It has changed completely from the previous statistics functionality.
In addition, you can manually assign a priority to the queries, InfoProviders and process chains. This priority is evaluated in the statistics. This can be used to establish a ranking or to exclude objects from the display in a report.
Please search in SAP Help, you will get more stuff.
http://help.sap.com/saphelp_nw70/helpdata/en/43/15c54048035a39e10000000a422035/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/ef/372242c4e05033e10000000a155106/frameset.htm
Thanks
CK

Technical content ** NW 2004s ** Please help

Hi,
When i check the reports of the technical content, i can only see the the Techcnical name of the Info Package.
Even if i choose display as " Key & Text " still unable to see the Ipak descreption in the report.
I have checked old 3.X statistics, i think, its the same issue there aswell.
Please help.
Thanks,
Nisha

Hi Srilatha,
I have applied the SAP Note 1088038 and tried loading 0tctprcsvar_text.
When i have checked in PSA, i can see the descreption of the Ipak.
But, if i maintain the master data and see that, the long descreption is blank.
Its not getting populated.
Please advise.
Thanks,
Nisha

Implement BI 7.0 Technical Content

Hi Experts,
I have a requirement to implement BI 7.0 Technical Content.I have ckecked in Dev System and they activated most of the Technical Content Cubes.Do I need to activate technical content queries and How should I run reports?what can I need to track by running reports and How can I run reports.Please provide me some useful steps.Thanks for your time.
Thanks,
Visu.

Check this one.
Link is working please check it again.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90080703-4331-2a10-cd98-9c1e95acdea0
If you need some lights see the following links please.
/thread/663047 [original link is broken]
http://help.sap.com/saphelp_bw30b/helpdata/en/eb/3c8c3bc6b84239e10000000a114084/content.htm
Regards.

Technical Content - Query Execution

Hi,
I have recently activated the Technical Content.
How do I identify the number of the times the query has been executed by the user? I found one column 'Number of Navigations' in the BW-Statistics workbook. What is this meant for ?
Thanks
Ramesh Ganji

hi Ramesh,
oss note 130696 -Performance trace in BW-Helps may explain the meaning.
to identify number of times query executed, there is keyfigure 0TCTSTAUIK - frequency,
check if helps business content query 0BWTC_C10_Q021
http://help.sap.com/saphelp_nw2004s/helpdata/en/68/84353cf261303de10000000a11402f/frameset.htm
you can utilize infoobjects OTCTQUERY, 0TCTSTAUIK (frequency), 0TCTUSERNM, 0TCTNAVCTR from multiprovider 0BWTC_C10
most user-run queries
130696 -Performance trace in BW-Helps
Symptom
How can you monitor the performance of a query in BW?
Other terms
Performance, tracing, BW, query, report, time
Solution
1) Activate the saving of statistical data for each InfoCube
-> BW Admin Workbench - Tools -> BW Statistics for Infoproviders ->
Select the "OLAP" field for the InfoCube.
3) Execute report/query
2) Analyze the RSDDSTAT table using Transaction SE16
Access, for example, using the InfoCube name or the user name or the
timestamp
1. Times that are saved:
QTIMEOLAPINIT
Time of the initialization of the query (for example, loading query in OLAP, compiling if required)
QTIMEOLAP
Time that the OLAP processor required
QTIMEDB
Time the database + network required to select the transaction data. The time is measured from when the SQL command is send to the database, and it is stopped when the requested data reaches the application server. This time therefore includes the transport on the network and the selection on the database.
QTIMEVARDP
Time the user required to enter the variables
QTIMEUSER
Time the user required between the navigation steps
QTIMECLIENT
Time of data formatting in the frontend
The time measurment starts when the OLAP processor has completed the data formatting. The data is then sent to the frontend (EXCEL). The time is stopped when the frontend (BW add-in in EXCEL) has inserted all data in the worksheets (writing the contents and formatting cell, if required). The time therefore includes the transport on the network with the RFC connection and the output in the frontend.
TIMECHAVLREAD
Time required to read master data
TIMEAUTHCHECK
Runtime of the authorization check.
TIMEREST
Time that could not be assigned in more detail (should be equal to 0; if this is not the case, something in the internal processing of the OLAP processor occured differently than expected.)
QRUNTIMECATEGORY
Time of a navigation step (QTIMEOLAPINIT + QTIMEOLAP + QTIMEDB + QTIMEEXCEL + QTIMECHAVLREAD) rounded to the next higher scaling (1,10,100,1000 ... seconds). As of 1.2B, this is rounded to 1,2,3, ... 10,20,30,...100,200,300,... seconds.
1. Data regarding the size of the query:
QDBSEL
Number of the records that had to be read on the database
QDBTRANS
Number of records that the database transferred to the server
QNUMCELLS
Number of cells that were transferred to the frontend
QNUMRANGES
Number of formattings that were transferred to the frontend
RECCHAVLREAD
Number of master data records to be read
1. In addition, the following is saved:
QAGGRUSED
Name of the aggregate used
QNACHLESEN
Indicator: Query reads during each navigation step
1. Administrative information
STATUID
Key of the table; link in view RSDDSTAT_V
QSESSION
All data for a call of the frontend (between start and end of the frontend) is compounded with this unique GUID.
QNAVSTEP
The navigation steps of a QSESSION are numbered in ascending order
QNUMOLAPREADS
Number of read operations OLAP processor for each navigation step
HANDLE
In the frontend, each embedded query has a separate, sequential number (handle)
If you want to analyze a certain query, start it and filter the values from the table afterwards: Selection options: infocube, user name, queryid (can be determined in the report monitor (Transaction RSRT)-> Technical information). The STARTTIME (UTC time) tells you whether you have found the correct session.
You can recognize a session because the QSESSION is always assigned the same ID. The sequence of the navigation steps is saved in QNAVSTEP. However, you can also determine it using the STARTTIME.

Technical Content - Delta Initialization

Hi,
While loading the Technical Content data, Do I need to run the Transactions - Delta Initialization infopackages everytime before I run the delta info packages.
Please help.
Thanks
Ramesh Ganji

Hi AHP,
I have executed both with text / without text infopackages for both 0TCTTQUERY & 0TCTQUERID.
I also checked the query by displaying key and name. Is is showing as #.
Post that I checked the Statistics cube. In cube some rows are blank without any query name, infocube name. But the frequency is having the value. May be because of this it is showing in the report.
Thanks
Ramesh Ganji

Steps in Technical Content (0TCT*)

Hello,
Please let me know the steps are correct or something is missing.
1) Activate the Technical content just like business content (say activating cube 0TCT_C03: Data Manager Statistics )
2) Check the extractor in BW, t-code RSA3 (self system) to see number of records
3) Load the data using infopackage and schedule delta
4) Run the standard query on this cube
Just need some clarification on "Activating Data Transfers for BW Statistics". This can be found in menubar Tools --> BI Statistics Setting. I can understand that here you can activate and de-activate individually the processes for saving and transferring data. But if we dont do this, can't we see the data in reports. Is this mandatory?
Please advice
Regards
Pank SAP

Hi Pank,
For all the Queries/Workbooks for which you want to collect Stats and see them in Reports, you have to activate or mark them/relevant Infoproviders in Datawarehousing Workbench.Tools> BI Statistics Settings.
For the new statistics, you have to determine the objects for which you want to update the statistics and to what level of detail. You call this dialog from the Data Warehousing Workbench. It has changed completely from the previous statistics functionality.
In addition, you can manually assign a priority to the queries, InfoProviders and process chains. This priority is evaluated in the statistics. This can be used to establish a ranking or to exclude objects from the display in a report.
Please search in SAP Help, you will get more stuff.
http://help.sap.com/saphelp_nw70/helpdata/en/43/15c54048035a39e10000000a422035/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/ef/372242c4e05033e10000000a155106/frameset.htm
Thanks
CK

Testing BW Statistics (Technical Content)

Hello ever one,
need some help in testing BW Statistics.
I have install all standard 6 cube and 1 multiprovider in Dev.
Every thing went fine,I am facing problem in testing,
as i am comparing BW Statistics Report out come with
BW objects (such as Cube/ODS-records/deleted records)
which are no where matching with BW Statistics report.
Is their any specific setting i have missed out coz of this
its not giving correct report ?
or some thing else need to be done for testing.
please let me know.
Thanks & Regards.

MWM,
Is this with respect to :
1. Requests being deleted ?
2. Selective deletion ?
Also what is the nature of mismatch - the records do not tally ?
2. There are no records in statistics ?
Try refreshing stats for the cubes and then reload technical content once again.. also check the same in table RSDDSTAT.
Arun

Need information regarding Technical Content

Hi
What is the work involved in activating Technical content ( not BI Content ).
How to do the testing on Technical Content ?
Please provide me some links or documents regarding Technical Content.
Thanks in Advance.
<Moderator Message: Please search the [help|http://help.sap.com] for the information you are looking for>
Edited by: Siegfried Szameitat on Jun 1, 2011 1:58 PM

Hello,
ODI is an ELT product and not a Reporting one.
To work correctly with this tool you need good knowledge about Databases ans SQL.
About the market I can't answer you, I know that a new ODI major release will go out in 2009 and i think that all will depend on, this release is announced as totally different of the last one.
Essbase is one of the technology which is managed by the product, I don't really see the need for planning knowledge...
In ODI you can work with different DB, coding in SQl or directly in OS language, Java or Jython which are the only accepted language (if i'm right).
Hope to be helpfull,

Impact of transporting some of the Technical Content Cubes

Hi All,
We are on BI 7.0.
We would like move only 5 of the cubes from Technical Content. We activated all the 11 cubes using Standard Report.
Questions:
1. I read in some of the threads Technical Content needs to be activated manually in the target systems...<b> i'm thinking we can transport it</b>.
2. I want to transport only 5 Cubes... <b>i don't think transporting these 5 cubes models without any other is not problem.</b>
Let us know your view.
Thanks inadvance!
Nagesh Ganisetti.

1. I read in some of the threads Technical Content needs to be activated manually in the target systems... YOU CAN ONLY ACTIVATE IN DEV AND TRANSPORT
2. I want to transport only 5 Cubes... YOU CAN COLLECT THE 5 CUBES AND TRANSPORT JUST THEM.
Hope this helps
EmJay
--- Assign points if helpful

Help to find the technical Content

I want to install Technical Content in BI 7.0 system, I ran the job RSTCC_ACTIVATE_ADMIN_COCKPIT and it is running, now after
this what are the steps. I need
1. 0TCT_C01 what is mapping datasource 0tct_ds01 but i do not find this when i go to TR- RSOR in BI Content installation.
I guess it will after the job RSTCC_ACTIVATE_ADMIN_COCKPIT is finished
also i think i have to install the process chains manually in RSOR
Please guide me since I want to see the loading time for all my DTP's and Infopakages can i use
"Runtimes of BI Application Objects" Report, what is OLAP Time is it the the time it took for extarction
Below is my requirement: Please help how to go about this
1. Data Load Time for New GL Model for all IP'S and DTP's per dat loading
2. How Many Users use the New GL report
3. How many infoobject are used in report
Thanks
Poonam Roy

Hi Poonam Roy,
Whole installation is defined in the note 934848. Once the installation is done you need to schedule the process chains to load the cubes.
Relevant documents:
1004166: Missing documents in help portal for Admin Cockpit
BI Query Runtime Statistics :
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/e3807a6df402d3e10000000a1553f7/frameset.htm
Admin Cockpit:
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/08a75d19e32d2fe10000000a11466f/frameset.htm
"Runtimes of BI Application Objects" gives the runtime of the BI application object i.e Workbooks and Templates.
1. Data Load Time for New GL Model for all IP'S and DTP's per dat loading
ANS: Check the queries defined on the cube 0TCT_MC22 & 0TCT_MC23.
2. How Many Users use the New GL report
ANS: Build your our query on the cube 0TCT_MC01 all the relevant information is present there.
Regards,
Srilatha

Actions of the APD logged in the technical content

Hey experts,
I am trying to clean up the bw system. Therefore, I created check queries on the technical content.
I have received a certain result.
I am tempted to delete certain queries, since they were not executed fo ra certain time. After having talked to a collegue, he told me that these queries are used on the analysis process designer (APD).
Can you tell me, if actions of the APD are logged in the technical content or not?
BR
Marcus

Hi,
Search them in following tables if anything is available
Queries
RSZELTDIR
Directory of the reporting component elements
RSZELTTXT Texts of reporting component elements
RSZELTXREF Directory of query element references
RSRREPDIR
Directory of all reports (Query GENUNIID)
RSZCOMPDIR Directory of reporting components
RSZRANGE Selection specification for an element
RSZSELECT
Selection properties of an element
RSZELTDIR
Directory of the reporting component elements
RSZCOMPIC
Assignment reuseable component <-> InfoCube
RSZELTPRIO Priorities with element collisions
RSZELTPROP Element properties (settings)
RSZELTATTR
Attribute selection per dimension element
RSZCALC Definition of a formula element
RSZCEL
Query Designer: Directory of Cells
RSZGLOBV
Global Variables in Reporting
RSZCHANGES Change history of reporting components
Workbooks
RSRWBINDEX List of binary large objects (Excel workbooks)
RSRWBINDEXT
Titles of binary objects (Excel workbooks)
RSRWBSTORE
Storage for binary large objects (Excel workbooks)
RSRWBTEMPLATE
Assignment of Excel workbooks as personal templates
RSRWORKBOOK Where-used list for reports in workbooks
Thanks and regards
Kiran

BI Technical Content in BI 7.0

Hi Experts,
Could any one help me in installing the BI Technical content in BI 7.0.
Please give me step by step procedure and tell me which are the Infocubes and Multiproviders i need to install.
Thanks,
Mansi.........

Hi,
please go through on below mention steps:
1.     In the administrator workbench, click the Business     Content bar on the left side and then click to set the default source systems.
2. The default source systems are displayed. Click to accept them &       continue. Double click Object Types.
1.     Click     and then select the collect automatically option i.e., BW will collect related objects for the infoproviders to be selected.
       4.   Click     and select the in dataflow before and afterwards             option. Now the infoobject & the object on which the infoobject depends will   be collected and activated together.
        5. Now we will select a Business content object and activate it. Click Select                objects under Infocubes to locate the required infocubes.
       6. Select the required infoobjects and then click
           Now the selected infocubes along with the respective infoobjects will be              transferred for installation.
       7. Click install and then select install to activate the selected infoobject and the              associated objects.
       8. The install in background option can be used when activating a large object.

Report on Technical Content

Similar Messages

Maybe you are looking for