Report on 'the number of calls' on an IVR Option menu

Dear NetPro gurus,
My customer has an IVR on UCCX which works fine.  However, they have recently add in an 'Option 6' where when PSTN caller press on it, it will redirect the call out to an 1800 number onto the PSTN.
The call connects perfectly fine.  What my customer wants is to have a report on how many PSTN caller press on this newly created Option 6 of the IVR. 
For all the other 5 IVR options, they all have an individual CSQ assigned to them and there is a 'Set Enterprise Call Info' step to send the 'options selected' to UCCX.
However, for this Option 6, since there is no CSQ (because the call gets redirect to a PSTN number), is there any way i can script it so that it can be tally and identified by Cisco Historical Reports too?
I have spent a lot of time on this already so would appreciated if anyone can shed some light on this.
Cheers,
Hunt                  

Hi Hunt
There are quite a few posts on the subject on the forums.
Basically you can do one of these things:
1) Run an 'application summary' report - typically the count of 'flow out' calls will be the  number of calls sent to your 1800 number, if this is the only non-CSQ destination that your script sends calls to (e.g. if there are no other external numbers, voicemail, or internal DNs that you send the calls to other than via a CSQ).
2) Run a 'custom call variables' report and then count up the number of rows that have the info that you set on 'set enterprise call info' when the call was routed externally
3) If those aren't good enough, then you can produce a custom report to show the data in the format the customer wants. This would require some good SQL and Crystal skills...
Regards
Aaron HarrisonPrincipal Engineer at Logicalis UK
Please rate helpful posts...

Similar Messages

  • How to find the number simultaneous call at a given moment on UCCX ?

    Hello,
    I would to know how to find the number simultaneous call at a given moment on UCCX ?
    it's on UCCX or UCCX RTMT, I don't know thanks a lot for your help.
    Aubert

    Hi Gergely,
    I should made a report on the number simultaneous call at a given moment on UCC on the server (all calls on the server)..

  • What the number to call for unauthorized IN APP purchases?

    Does anyone know the number to call for "unauthorized" in app purchases?  Freq asked questions don't answers my purchases questions.

    Hi mbabecake,
    Happy Holidays!  The iTunes Store support is web based.  The resources below will explain how to review your purchase history and report any issues.  Click on the link below to get in touch with the iTunes Store Support team.
    See your purchase history in the iTunes Store - Apple Support
    http://support.apple.com/en-us/ht2727
    Report a problem or request a refund for a purchase made within the last 90 days.
    See your purchase history
    Click to open your account in iTunes.
    Sign in with your Apple ID. iTunes will open to your purchase history, and you'll see the items you purchased.
    Alternatively, you can:
    Open iTunes.
    Click iTunes Store.
    Click Sign In.
    Enter your Apple ID and password.
    Click your Apple ID and select Account from the drop-down menu.
    Next to Purchase History, click See All.
    It might take a moment for your Purchase History to appear.
    To see the details for a purchase, click the arrow to the left of the order date. Your most recent purchases are first.
    You'll see the date, time, and web order number in the top-right corner. If you don't recognize a purchase, see if it's one of these types of charges.
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/HT1933?viewlocale=en_US
    Report an problem with an item you bought from the iTunes Store, App Store, Mac App Store, or iBooks Store
    You can use your email receipt to report a problem. If you use Family Sharing and you have an problem with a shared item, ask the family member that bought the item to report the problem using the steps below.
    To report a problem with an item you bought, follow these steps:
    Find the email receipt for your purchase.
    Click Report a Problem under the item you're having a problem with.
    Enter the Apple ID and password you used to purchase the item, then click Report a Problem.
    Click Report a Problem next to the item you are having a problem with.
    Select your problem from the Choose Problem menu.
    Follow the onscreen instructions. You might be asked to describe the problem in a text field.
    Click Submit and we'll review your problem.
    I hope this information helps ...
    - Judy

  • How can i reduce the number of calls archived in recents

    How can i reduce the number of calls archived in recents

    You can't change that.  It's a function of the OS and cannot be altered.

  • Identify the number server calls using java

    how to identify the number server calls that are made for rendering the page, Also have each call transmission data too.using java language.

    What??? What are you talking about? What environment? What server?

  • How to count the number of calls that traversed the DB lookup node successfully

    Hi All,
    I need to obtain the number of calls that successfully traversed the DB  lookup node.
    Can you please let me know, what is the variable I need to add after the DB lookup node to capture the number of succesful calls.
    Kindly help.

    Hi Nirmala,
    I hope you are looking for how many calls passed the DBLookupnode in script.
    In DBLookup node you have a Right Branch and Wrong Branch.
    1) After the right branch, set an unused peripheral variable and store the Value "Success"
    2) For the wrong branch, set the same variable with the Value "Failure".
    You can execute a query against the HDS and have the numbers.
    Else you can setup a CallType as well before and after the node.
    Regards,
    Senthil

  • Brand new BT Decor 2100 "the number you called has...

    My line had a buzzing, so I called BT and they sent me an engineer. I cost me £198 for him to tell me that it was the fault of my old BT Vanguard phone...
    So, I bought a BT Decor 2100.  Now I can't make any calls at all, I just get "The number you called hasn't been recognised".
    Is there a test I can run to verify that my key tones are being generated correctly? 
    Solved!
    Go to Solution.

    I decided to try one last test before sending my new phone back to Amazon, so I dialled my cellphone again, but this time very carefully.  Then I spotted the problem... the phone's keys #5 and #8 are transposed.  When I ignored this error, my calls worked.
    The keys cannot be removed without opening the case of the phone, and that would invalidate any warranty. So, I'll get a replacement.
    If only one of our phone numbers contained neither #5 nor #7 then we'd have spotted the problem sooner.  We both felt there was something "odd" when we were dialling, but didn't twig the transposition.
    Bizarrely, I almost added a humorous touch to my initial post, telling about the trick of transposing the buttons on the IBM 3720 tape drives, or the IBM 1403 printer.  One of our operators got sacked for playing this trick on his colleagues as an April Fool's prank.  I should have checked this possibility, but in my own defence, it's not April 1st...

  • TS2446 what is the number to call to enable disabled apple id

    what is the number to call to enable disabled apple id

    There is not number,
    Click Contact Us at the bottom of this page, then click Contact Itunes Support

  • The number I call is busy

    The voice prompt tells me the number is busy
    If the voice prompt tells you that the number you called is busy and you should try again later then in fact your contact’s number you entered in your Skype To Go account may be invalid.
    A common mistake is entering the country code twice. For example, if trying to call to Australia (+61), do not enter the country code “61” at the beginning of your contact’s number because the number is automatically amended with “+61” afterwards. To check your contact’s number you entered please go to your Skype To Go account overview and click on “edit” next to your contact’s number.
    If the problem still persists, try calling the number from Skype on your computer. If you get an error message then the number may in fact be invalid. Should the number ring normally, but not via Skype To Go, then please submit a ticket with customer service including your Skype To Go number, your contact’s number, and the time & date you tried calling.
    I always get a busy tone
    If you don’t get a voice prompt message but there is always a busy tone then please submit a ticket with customer service, including your Skype To Go number, your contact’s number, and the time & date you tried calling.
    Follow the latest Skype Community News
    ↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

    Voicemail is a carrier feature.  Check with your carrier

  • I'm an AT&T employee, what is the number to call to assist family & friends with billing issues?

    I'm an AT&T employee, what is the number to call to assist family & friends with billing issues? I've already checked with my director and he couldn't recall it either.  
    Thanks.
    [edited for privacy-please do not post personal or unique information such as but not limited to full names, employee ID numbers, email addresses, phone numbers, account numbers, etc.]

    There is no such number that I have ever heard of. There is an employee website for submitting service escalations, though.

  • Report showing the number of active users in the system

    All,
    There is a standard SAP report which shows the number of active users in the system (output same as AL08).
    Does anyone remember this?
    Cheers,
    Bidwan

    Hello Bidwan, 
    Are you talking about the report RSUSR000?
    Regards.
    Ruchit.

  • Classic Report limit the number of rows displayed

    Hi All,
    In my application I have a classic Report which show the data of a simple query. For lay-out reasons I want to limit the number of display to 5 instead of the default 15. I've looked in several forums and they told me that I have to set the number of rows in the report attributes.
    But it did not what I want. I'm Using APEX 4.1.0 on a Oracle 11G database
    My question is: How can I limit the maximum number of rows in a classic SQL Report.

    Hamertje16 wrote:
    In my application I have a classic Report which show the data of a simple query. For lay-out reasons I want to limit the number of display to 5 instead of the default 15. I've looked in several forums and they told me that I have to set the number of rows in the report attributes.And did you do so?
    But it did not what I want. I'm Using APEX 4.1.0 on a Oracle 11G databaseHow did it not do what you want? Displayed an error? Displayed no rows? Displayed 15 rows? Displayed some other number of rows? We can only help if we fully understand the nature of the problem.
    My question is: How can I limit the maximum number of rows in a classic SQL Report.To display 5 rows per page set the report's Number of Rows attribute to *5*.
    However, pagination settings get cached for the duration of the session. For this change to be instantly visible, either log out, restart the brower, and log in again, or manually re-request the page from the browser address bar, adding 'RP' in the ClearCache position in the URL.

  • How do I choose the number to call using Siri?

    How do I correctly choose the number when using siri?
    The issue I am having is this:
    me: " call Tom Smith"
    Siri: "calling Tom Smith, which number would you like to call?... Three: 07897332123 or work: 01811231234?"
    me: "three"
    Siri: "I am sorry I do not understand "three" which number would you like to call?
    How do I tell Siri to call the number listed as "three"?

    It might not be possible to get this to work. It sounds like, when you say "three", Siri is interpreting it as the number 3 rather than the word. You may have hit a limit of Siri's artificial intelligence engine.

  • Remove the number in call divert

    Hi
    I have a nokia X5800 and I have set up call divert and assigned another phone number to it.  Now, how do I remove that phone number in call divert?
    Any help will be appreciated. Thanks in advance.

    Call divert is actually a network function. All your phone does is to facilitate this function by sending codes to your network. Have a look at this link. It lists the codes that are sent by the phone when setting up the call diverts. You also have the option of dialling the codes manually. Call divert settings can also be changed by contacting your network.
    To change the divert number, you first deactivate the divert and you will be asked for the new number when reactivating. Alternatively just contact your network and ask them to do it for you. I find this simpler because there are just too many different types of diversion and it is easier to tell someone what you want then to try to figure out what each of them mean.

  • What's the Number to call and get help, What's the Number to call and get help

    Need help wit calling the apple people to remove a card number

    If you are looking for a phone number, try here. This lists phone numbers in every country where Apple support is available.
    Contacting Apple For Support and Service.
    http://support.apple.com/kb/HE57

Maybe you are looking for