Report on Total U/R stock and Open PO quantity

Dear Friends,
Is there any standard report or table which gives the present unrestricted usage stock and Open purchase order stock for all materials in a storage location or material group as selection instead of single material. If we can have open Puchase requisition quantity also in report then it will be more helpful.
Thanks for timely help ......
Best Regards
Varsit

Hello Varsit,
There is not stardard report available for this information, but you can link EKPO, EKBE (PO history) table and MARD table to get this information. For Purchase requisition, you can use EBAN table.
Hope this helps
Regards
Arif Mansuri

Similar Messages

  • Report  showing list of order confirmations and open/close reservations?

    Hi
    Can we have any standard report having list of  order confirmations and open/close reservations in SAP PM ?
    Regards
    Pooja

    Hi Pooja,
    Try IW12, Display Document flow, if you are looking for a combined report of Order confirmations and Material status.There are various other reports related to order confirmations and Material status seperately. For material status you can use IWBK.
    Better place to post PM questions is in Enterprise Asset management Forum.
    Warm regards,
    Srinivas Potluri

  • Open PR Quantity and Open PO Quantity

    Dear Friends, Good Morning..
    Please suggest me...
    I need to create a report with Inventory + PO + Plan data.
    In case of PO I need
    Open PR Quantity  and
    Open PO Quantity
    Open PO Quantity : I'm getting from 0PUC_C01 InfoCUbe i.e.
    Open PO Quantity =  PO Qty -  GR Qty.
    But how can I get Open PR Quantity  please help me.
    Thanks
    Gnaga

    Hi,
    I dont see anything like open PR quantity. u cant have GR based on PR, even if it is an internal order an STO has to be cretaed out of this PR.
    Check for more with ur functional consultant and design acordingly.
    regards
    Joga

  • Open PO Quantity and Open PR Quantity

    Dear Friends,
    How can we get Open PO Quantity and Open PR Quantity?.
    I used 2LIS_02_ITM, 2LIS_02_SCL to 0PUR_C01 Cube and 0PUR_DS03 DSO and I have done lots of R & D by using restrictions i.e. Delivery Completed indicator, I'm getting GR Qty, but not Open PO Qty..
    And in teh same way how can I get Open PR Qty?. From EBAN table, I can create Generic DS, But is the any SAP Defined DS's apart from 0DF_IS_DFS_32
    Thanks
    Ganga.

    HI,
    Check the below link for EBAN which will help you in getting a generic datasource working like a standard datasource to get details of EBAN.
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10b68b99-022e-2a10-999d-c4dc9ec24a59&overridelayout=true
    Thanks,
    Arun

  • Report by month with Valuated stock and special stock by storage location

    Dear All,
    I need a report similar to MCBE with stock level (including "storage loc/batch Stock" plus "special stock(Q)") by plant and storage location.
    I try it with MCBE tcode, but i only get  "storage loc/batch Stock" in column named valuated stock. Also I can obtain that information in MB5B tcode, but I cannot get data by storage location, only plant.
    Does anyone know how can solve it?
    Thanks in advance,
    Sebastiá

    Hi,
    Use MC.9 T.code.
    click on "switch drilldown" and select storage location.
    Regards
    Hari

  • Po list showing the total amount with advances given & open GR quantity

    Hi Gurus,
    My client need to know the list of total p/os showing its gross total amount only (& not with the line items) with the advances rendered to them & its open GR quantity against total qunatity mentioned.
    I hv tried in ME80FN, ME2N, ME2L ME2M..etc and all other reports but the system is showing the same with the line items. Kindly advise.
    Regds
    Prashant Bijutkar

    Prashant,
    All three informations will not be available in one report(gross total amount  not with the line items and the advances rendered to them & its open GR quantity against total qunatity mentioned).
    You have to dovelop this report. please take help from technical consultant.
    One more thing the open GR quantity will always at PO line item level not at header level.
    Regards,
    Manish

  • Report Based Total - when??

    Hi,
    sometimes I get the issue that when I put totals on groups in reports they are only correct when I have un-ticked 'report based total', but at other times, sometimes with the same source, it works fine....
    I have trawled the site on advice around report based totals, but can anyone give me a definitive rule for when 'report based total' will definitely work, and when it will definitely not work, and if there are any areas of grey between these where the 'safer' option is to un-tick report based total.
    My reason for the request is that I am putting together an answers guide which includes specific advice on our repository, and I would like to be able to give the advice, against each business area of whether to use 'rbt' or not.
    Finally am I correct that the only benefit to using report based total is one of speed?
    My version is 10.1.3.4
    Many thanks,
    Robert.

    Hi,
    This will be used for "Oracle BI Server will calculate the total based on the entire result set, before applying any filters to the measure columns".
    Refer:
    http://docs.oracle.com/cd/E14571_01/bi.1111/e10544/creatingviews.htm
    http://gerardnico.com/wiki/dat/obiee/11g
    http://gerardnico.com/wiki/dat/obiee/answer
    Thanks
    Deva
    Edited by: Devarasu on Dec 20, 2011 5:29 PM

  • Open PIR quantity, unconverted Pld orders and open Prod/ STO orders

    Dear all,
    How to deal with open PIR quantity, unconverted planned orders and open production/ STO orders in the next MRP run? Do we need to delete/ reduce them manually?
    Thanks and Regards,
    Raghu

    Hi Shiva,
    Thanks for your immediate response. I have still some confusion.
    Last month, I have material A with Production order quantity of 30000.
    'A' has a component 'B' which is an in-house produced material. Three planned orders each of 10000 were generated for B. Of these two planned orders were converted to production orders. One is still in planned order form.
    This month I am not going to use this planned order of B. I get new requirement for A. So during MRP run I get the planned orders for B also.
    For the last month requirement, as I have not converted one planned order of B to prod order, there will an open quantity of A prod order in this plant and open STO quantity in another plant. Again the PIR will also be not reduced to the same extent. If I reduce the PIR manually or through some reorganization, what about the open quantity of prod order and STO
    I think I can TECO the prod order of A. Is there any such thing for STO also?
    Thanks and Regards,
    Raghu

  • Reports for Itemwise ageing and Stock with opening and closing

    Dear All,
    Is there any default reports in SAP for Item wise ageing and the stock status with
    opening stock,In and Out stock and closing stock
    for a given period.
    Regards,
    Shyam

    Hi,
             Thanks for the quick reply.....But is there any accurate query for that....Bcoz i found a query which shows the qty but nothing is coming in the value...
    Regards,
    shyam

  • Report on pending order qty,opening stock, and closing stock

    Any standard Report available on pending order qty against opening stock, and closing stock.
    Points assured
    Mohan

    Hi Mohan
    There is no report in standard SAP for stock in transit that is what you are refering to Pending order Qty & opening stock.
    You can get report in ME2M, ME2L for pending PO's.
    In MD04 you will get all these stock, PO Qty, & Closing stock but this is for individual material this has to be made customized report in reporting format same thing we have done in one of our project.
    Regards

  • Opening Stock and Closing Stock

    Hi,
      I have one requirement to get a opening stock and closing stock of all materials,  based on the plant date and mat type.
    Could u tell me the flow of tables one by one
    Its is possible to get the opening stock and closing stock of all materials.
    Please Guide Me.
    Thanks & Regards,
        Dhanush.S.T

    go through this....
    *& Report  Z_OPEN_CLOSE                                                *
    REPORT  Z_OPEN_CLOSE MESSAGE-ID YW2 LINE-SIZE 231 LINE-COUNT 45
    NO STANDARD PAGE HEADING.
    Type Declaration *
    TYPE-POOLS SLIS.
    Tables *
    TABLES: MKPF, " Material Document: Header Data
            MSEG, " Material Document: Item Data
            MARA,
            MARD,
            S031,
            EKKO,
            EKPO,
            LIKP,
            MAKT,
            J_1IWRKCUS,
            T001W,
            WB2_V_MKPF_MSEG2,
            MMIM_REP_PRINT,
            YW2_STKMOVEMENTS,
            YPLNT,
            MARDH.
    Internal Tables *
    DATA: I_WERKS LIKE J_1IWRKCUS OCCURS 0 WITH HEADER LINE.
    DATA: BEGIN OF I_YPLNT OCCURS 0,
             PPLNT LIKE YPLNT-PPLNT,
             WPLNT LIKE YPLNT-WPLNT,
          END OF I_YPLNT.
    DATA: BEGIN OF I_MKPF OCCURS 0,
            MBLNR LIKE MKPF-MBLNR,
            MJAHR LIKE MKPF-MJAHR,
            BUDAT LIKE MKPF-BUDAT,
            VGART LIKE MKPF-VGART,
            BWART LIKE MSEG-BWART,
            MATNR LIKE MSEG-MATNR,
            WERKS LIKE MSEG-WERKS,
            LGORT LIKE MSEG-LGORT,
            MENGE LIKE MSEG-MENGE,
            MEINS LIKE MSEG-MEINS,
            KUNNR LIKE MSEG-KUNNR,
            ZEILE LIKE MSEG-ZEILE,
            XAUTO LIKE MSEG-XAUTO,
            SHKZG LIKE MSEG-SHKZG,
            MATNR1 LIKE MSEG-MATNR,
          END OF I_MKPF.
    DATA: BEGIN OF I_MARDH OCCURS 0,
           WERKS LIKE MARDH-WERKS,
           MEINS LIKE MARA-MEINS,
           MATNR LIKE MARDH-MATNR,
           LGORT LIKE MARDH-LGORT,
           LABST LIKE MARDH-LABST,
           LFGJA LIKE MARDH-LFGJA, "Added -MB
           LFMON LIKE MARDH-LFMON, "Added -MB
           PERIO(6),
           INSME LIKE MARDH-LABST,
           EINME LIKE MARDH-LABST,
           SPEME LIKE MARDH-LABST,
           RETME LIKE MARDH-LABST,
           O_STK LIKE MARDH-LABST, " Opening Stock
           C_STK LIKE MARDH-LABST, " Closing Stock
          END OF I_MARDH.
    DATA: BEGIN OF I_MARD OCCURS 0,
           WERKS LIKE MARD-WERKS,
           MATNR LIKE MARD-MATNR,
           LGORT LIKE MARD-LGORT,
           LABST LIKE MARD-LABST,
           INSME LIKE MARD-LABST,
           MEINS LIKE MARA-MEINS,
           EINME LIKE MARD-LABST,
           SPEME LIKE MARD-LABST,
           RETME LIKE MARD-LABST,
          END OF I_MARD.
    DATA: I_MARD1 LIKE I_MARD OCCURS 0 WITH HEADER LINE.
    DATA: I_MARDH1 LIKE I_MARDH OCCURS 0 WITH HEADER LINE.
    DATA: BEGIN OF I_MKPF1 OCCURS 0,
            MBLNR LIKE MKPF-MBLNR,
            WERKS LIKE MSEG-WERKS,
            MATNR LIKE MSEG-MATNR,
            BUDAT LIKE MKPF-BUDAT,
            BWART LIKE MSEG-BWART,
            MJAHR LIKE MKPF-MJAHR,
            VGART LIKE MKPF-VGART,
            LGORT LIKE MSEG-LGORT,
            MENGE LIKE MSEG-MENGE,
            MEINS LIKE MSEG-MEINS,
            XAUTO LIKE MSEG-XAUTO,
            SHKZG LIKE MSEG-SHKZG,
          END OF I_MKPF1.
    DATA: BEGIN OF I_MKPF2 OCCURS 0,
           WERKS LIKE MSEG-WERKS,
           MATNR LIKE MSEG-MATNR,
           BUDAT LIKE MKPF-BUDAT,
           BWART LIKE MSEG-BWART,
           MJAHR LIKE MKPF-MJAHR,
           VGART LIKE MKPF-VGART,
           LGORT LIKE MSEG-LGORT,
           MENGE LIKE MSEG-MENGE,
           MEINS LIKE MSEG-MEINS,
           XAUTO LIKE MSEG-XAUTO,
         END OF I_MKPF2.
    DATA: BEGIN OF I_FINAL5 OCCURS 0,
           WERKS LIKE MSEG-WERKS, " Plant
           MATNR LIKE MSEG-MATNR, " Material
           LGORT LIKE MSEG-LGORT, " Storage Location
           BUDAT LIKE MKPF-BUDAT, " Posting Date
           MTART LIKE MARA-MTART, " Material Type
           SPMON LIKE S031-SPMON, " Month
           MAKTX LIKE MAKT-MAKTX, " Description
    meins(3), " UOM
            MEINS LIKE MSEG-MEINS,
            O_STK LIKE MARDH-LABST, " opening stock
            TRECEP LIKE MARDH-LABST, " total receipts
            PRODU LIKE MARDH-LABST, " Net Receipts - Production
            RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
            SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
            TDISP LIKE MARDH-LABST, " total dispatches
            CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
            OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
            TLOSS LIKE MARDH-LABST, " Total Loss
            TRLOSS LIKE MARDH-LABST, " Transit Loss
            WHLOSS LIKE MARDH-LABST, " Warehouse Loss
            C_STK LIKE MARDH-LABST, " Closing Stock
            TRFSTK LIKE MARDH-LABST, "Transfer stock
            MENGE LIKE MSEG-MENGE,
            OTHADJ LIKE MARDH-LABST,
          END OF I_FINAL5.
    DATA: BEGIN OF I_FINAL OCCURS 0,
            WERKS LIKE MSEG-WERKS, " Plant
            MATNR LIKE MSEG-MATNR, " Material
            BUDAT LIKE MKPF-BUDAT, " Posting Date
            MTART LIKE MARA-MTART, " Material Type
            SPMON LIKE S031-SPMON, " Month
            MAKTX LIKE MAKT-MAKTX, " Description
    meins(3), " UOM
            MEINS LIKE MSEG-MEINS,
            O_STK LIKE MARDH-LABST, " opening stock
            TRECEP LIKE MARDH-LABST, " total receipts
            PRODU LIKE MARDH-LABST, " Net Receipts - Production
            RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
            SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
            TDISP LIKE MARDH-LABST, " total dispatches
            CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
            OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
            TRFSTK LIKE MARDH-LABST, "Material Transfer stock
            TRLOSS LIKE MARDH-LABST, " Transit Loss
            WHLOSS LIKE MARDH-LABST, " Warehouse Loss
            TLOSS LIKE MARDH-LABST, " Total Loss
            C_STK LIKE MARDH-LABST, " Closing Stock
            OTHADJ LIKE MARDH-LABST,
           END OF I_FINAL.
    DATA: I_FINAL1 LIKE I_FINAL OCCURS 0 WITH HEADER LINE.
    DATA: BEGIN OF I_FINAL_TEMP OCCURS 0,
            WERKS LIKE MSEG-WERKS, " Plant
            MATNR LIKE MSEG-MATNR, " Material
            MTART LIKE MARA-MTART, " Material Type
            MAKTX LIKE MAKT-MAKTX, " Description
            MEINS LIKE MSEG-MEINS,
            O_STK LIKE MARDH-LABST, " opening stock
            TRECEP LIKE MARDH-LABST, " total receipts
            PRODU LIKE MARDH-LABST, " Net Receipts - Production
            RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
            SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
            TDISP LIKE MARDH-LABST, " total dispatches
            CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
            OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
            TRFSTK LIKE MARDH-LABST, "Material Transfer stock
            TRLOSS LIKE MARDH-LABST, " Transit Loss
            WHLOSS LIKE MARDH-LABST, " Warehouse Loss
            TLOSS LIKE MARDH-LABST, " Total Loss
            C_STK LIKE MARDH-LABST, " Closing Stock
            OTHADJ LIKE MARDH-LABST,
          END OF I_FINAL_TEMP.
    For Materials
    DATA: BEGIN OF I_MARA OCCURS 0,
           MATNR TYPE MARA-MATNR,
           MTART TYPE MARA-MTART,
           MEINS LIKE MARA-MEINS,
           LABST TYPE MARD-LABST,
           MAKTX LIKE MAKT-MAKTX,
          END OF I_MARA.
    DATA: BEGIN OF I_STKMVMNTS OCCURS 0,
           BWART LIKE MSEG-BWART,
           SHKZG LIKE MSEG-SHKZG,
           VZBEW LIKE YW2_STKMOVEMENTS-VZBEW,
          END OF I_STKMVMNTS.
    DATA: BEGIN OF I_FINALT OCCURS 0,
           WERKS LIKE MSEG-WERKS, " Plant
           MATNR LIKE MSEG-MATNR, " Material
           BUDAT LIKE MKPF-BUDAT, " Posting Date
           MTART LIKE MARA-MTART, " Material Type
           SPMON LIKE S031-SPMON, " Month
           MAKTX LIKE MAKT-MAKTX, " Description
    meins(3), " UOM
           MEINS LIKE MSEG-MEINS,
           O_STK LIKE MARDH-LABST, " opening stock
           TRECEP LIKE MARDH-LABST, " total receipts
           PRODU LIKE MARDH-LABST, " Net Receipts - Production
           RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
           SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
           TDISP LIKE MARDH-LABST, " total dispatches
           CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
           OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
           TRFSTK LIKE MARDH-LABST, "Material Transfer stock
           TRLOSS LIKE MARDH-LABST, " Transit Loss
           WHLOSS LIKE MARDH-LABST, " Warehouse Loss
           TLOSS LIKE MARDH-LABST, " Total Loss
           C_STK LIKE MARDH-LABST, " Closing Stock
           OTHADJ LIKE MARDH-LABST,
           MONTH(8) ,
          END OF I_FINALT.
    DATA: IMKPFT LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
    DATA: IMKPFT1 LIKE I_MKPF1 OCCURS 0 WITH HEADER LINE.
    DATA: IMARDT LIKE I_MARD OCCURS 0 WITH HEADER LINE.
    DATA: IMARDHT LIKE I_MARDH OCCURS 0 WITH HEADER LINE.
    DATA: T_FINAL LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
    DATA: IMKPFT2 LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
    FCAT is used for the field catalog
    DATA: FCAT TYPE TABLE OF SLIS_FIELDCAT_ALV WITH NON-UNIQUE DEFAULT KEY
                      WITH HEADER LINE INITIAL SIZE 0,
    for excluding the ICONs from the application toolbar
          FEXC TYPE TABLE OF SLIS_EXTAB WITH NON-UNIQUE DEFAULT KEY
                     WITH HEADER LINE INITIAL SIZE 0,
    FS_LAYO is used for Grid Layout
          FS_LAYO TYPE SLIS_LAYOUT_ALV,
    FEVENTS to handle the events TOP OF PAGE & USER_COMMAND
          FEVENTS TYPE TABLE OF SLIS_ALV_EVENT WITH NON-UNIQUE DEFAULT KEY
                     WITH HEADER LINE INITIAL SIZE 0,
    FHEADER is used for List header
          FHEADER TYPE TABLE OF SLIS_LISTHEADER WITH NON-UNIQUE DEFAULT KEY
                     WITH HEADER LINE INITIAL SIZE 0,
    sort is used for sorting
          FSORT TYPE TABLE OF SLIS_SORTINFO_ALV WITH NON-UNIQUE DEFAULT KEY
                     WITH HEADER LINE INITIAL SIZE 0,
          FCAT1 TYPE TABLE OF SLIS_FIELDCAT_ALV WITH NON-UNIQUE DEFAULT KEY
                    WITH HEADER LINE INITIAL SIZE 0,
          FS_LAYO1 TYPE SLIS_LAYOUT_ALV,
          GT_LIST_TOP_OF_PAGE1 TYPE SLIS_T_LISTHEADER,
          FEVENTS1 TYPE TABLE OF SLIS_ALV_EVENT WITH NON-UNIQUE DEFAULT KEY
                 WITH HEADER LINE INITIAL SIZE 0,
           FHEADER1 TYPE TABLE OF SLIS_LISTHEADER WITH NON-UNIQUE DEFAULT  
                  KEY WITH HEADER LINE INITIAL SIZE 0,
           G_STATU_071 TYPE SLIS_FORMNAME VALUE 'Z_PFSTATUS',
           ALV_VARIANT1 LIKE DISVARIANT.
    Variable Declaration *
    TYPES: TRFF_TYPE_DEC_6_5(6) TYPE P DECIMALS 5.
    DATA: FYEAR(4),
          MON(2),
          FYEAR1(4),
          MON1(2),
          OBAL LIKE MARD-LABST,
          CBAL LIKE MARD-LABST,
          INDEX TYPE I,
          COUNT,
          COUNT1 TYPE I,
          O_STK TYPE P DECIMALS 3,
          C_STK TYPE P DECIMALS 3,
          V_MJAHR LIKE MKPF-MJAHR,
          MONTHS TYPE TRFF_TYPE_DEC_6_5,
          MONTH TYPE I.
    Global variables for handling ALV functionality
    DATA: ALV_KEYINFO TYPE SLIS_KEYINFO_ALV,
          ALV_VARIANT LIKE DISVARIANT,
          ALV_LAYOUT TYPE SLIS_LAYOUT_ALV,
          ALV_REPID LIKE SY-REPID,
          ALV_PRINT TYPE SLIS_PRINT_ALV,
          ALV_DETAIL_FUNC(30),
          ALV_DEFAULT_VARIANT LIKE DISVARIANT-VARIANT,
          ALV_COLOURIZE_FIELDS LIKE MMIM_REP_PRINT-COLOR.
    RANGES: R_BUDAT FOR MKPF-BUDAT.
    *Added by Prabhu for year on 26.4.05.
    DATA: IDATE LIKE R_BUDAT OCCURS 0 WITH HEADER LINE.
    Selection Screen Elements *
    SELECTION-SCREEN BEGIN OF BLOCK BLK WITH FRAME TITLE TEXT-001.
      SELECT-OPTIONS: S_WERKS FOR MARD-WERKS OBLIGATORY NO INTERVALS.
      PARAMETER: P_SPMON LIKE S031-SPMON NO-DISPLAY .
      SELECT-OPTIONS: S_MATNR FOR MARA-MATNR OBLIGATORY,
                      S_LGORT FOR MSEG-LGORT NO-EXTENSION NO INTERVALS,
                      S_MBLNR FOR MKPF-MBLNR,
                      S_BUDAT FOR MKPF-BUDAT OBLIGATORY .
    SELECTION-SCREEN END OF BLOCK BLK.
    SELECTION-SCREEN BEGIN OF BLOCK BLK3 WITH FRAME TITLE TEXT-004.
          PARAMETER : MTART LIKE MARA-MTART DEFAULT 'FERT' NO-DISPLAY.
    SELECTION-SCREEN END OF BLOCK BLK3.
    SELECTION-SCREEN BEGIN OF BLOCK BLK2 WITH FRAME TITLE TEXT-003.
    SELECTION-SCREEN END OF BLOCK BLK2.
    ADDED BY PRABHU FOR DAY-WISE REPORT.
    SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-007.
      PARAMETERS: D1 RADIOBUTTON GROUP P1 DEFAULT 'X',
                  M1 RADIOBUTTON GROUP P1,
                  Y1 RADIOBUTTON GROUP P1.
    SELECTION-SCREEN END OF BLOCK B3.
    SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-006.
    PARAMETERS: ALV_DEF LIKE DISVARIANT-VARIANT.
    SELECTION-SCREEN END OF BLOCK B2.
    DATA: S_BUDAT1 LIKE S_BUDAT OCCURS 0 WITH HEADER LINE."prabhu
    Initialization *
    INITIALIZATION.
      PERFORM ALV_INIT.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR ALV_DEF.
      PERFORM ALV_F4.
    At Selection Screen
    *AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_spmon.
    PERFORM monat_f4.
    At Selection Screen *
    AT SELECTION-SCREEN.
    checking for the layout
      PERFORM ALV_CHECK.
    authorisation check for the Plant
    PERFORM auth_check.
    Validation for the Plant
      PERFORM VALIDITY_CHECK.
      IF MTART NE 'FERT'.
        MESSAGE E041 WITH 'Material Type must be FERT Only...'.
      ENDIF.
      IF D1 = 'X'." On 26.4.05.
        P_SPMON0(4) = S_BUDAT-LOW0(4).
        P_SPMON4(2) = S_BUDAT-LOW4(2).
      ELSE.
        P_SPMON0(4) = S_BUDAT-LOW0(4).
        P_SPMON4(2) = S_BUDAT-LOW4(2).
      ENDIF.
      LOOP AT S_BUDAT.
        IF S_BUDAT-HIGH IS INITIAL.
          S_BUDAT-HIGH = S_BUDAT-LOW.
          MODIFY S_BUDAT.
        ENDIF.
      ENDLOOP.
      IDATE-LOW = S_BUDAT-LOW.
      IDATE-HIGH = S_BUDAT-HIGH.
      CALL FUNCTION 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
        EXPORTING
           I_DATE_FROM = IDATE-LOW
           I_DATE_TO = IDATE-HIGH
       IMPORTING
    E_DAYS =
          E_MONTHS = MONTH
    E_YEARS =
      DATA: I(3) TYPE C.
      I = S_BUDAT-LOW+4(2).
      CLEAR: R_BUDAT.
      REFRESH: R_BUDAT.
    *added by Prabhu for Only for Oneday.on 18.5.5
      IF MONTH EQ '0'.
        MONTH = MONTH + 1.
      ENDIF.
    *added by Prabhu for Only for Oneday.on 18.5.5
      DO MONTH TIMES.
        R_BUDAT-LOW = S_BUDAT-LOW.
        APPEND R_BUDAT.
      ENDDO.
      I = 0.
      LOOP AT R_BUDAT.
        R_BUDAT-LOW4(2) = S_BUDAT-LOW4(2) + I.
        I = I + 1.
        R_BUDAT-LOW+6(2) = '01'.
        MODIFY R_BUDAT.
      ENDLOOP.
      LOOP AT R_BUDAT.
        CALL FUNCTION 'RP_LAST_DAY_OF_MONTHS'
           EXPORTING
             DAY_IN = R_BUDAT-LOW
           IMPORTING
             LAST_DAY_OF_MONTH = R_BUDAT-HIGH
          EXCEPTIONS
            DAY_IN_NO_DATE = 1
            OTHERS = 2
        MODIFY R_BUDAT.
      ENDLOOP.
      LOOP AT R_BUDAT.
        IF R_BUDAT-LOW4(2) = S_BUDAT-LOW4(2).
          R_BUDAT-LOW = S_BUDAT-LOW.
          MODIFY R_BUDAT.
        ENDIF.
        IF R_BUDAT-HIGH4(2) = S_BUDAT-HIGH4(2).
          R_BUDAT-HIGH = S_BUDAT-HIGH.
          MODIFY R_BUDAT.
        ENDIF.
    For Summary on 26.4.05.
        IF Y1 = 'X'.
          CLEAR R_BUDAT.
          REFRESH R_BUDAT.
          R_BUDAT-LOW = S_BUDAT-LOW.
          R_BUDAT-HIGH = S_BUDAT-HIGH.
          APPEND R_BUDAT.
          CLEAR R_BUDAT.
        ENDIF.
      ENDLOOP.
    At Selection Screen *
    AT SELECTION-SCREEN OUTPUT.
    Start of Selection *
    START-OF-SELECTION.
      V_MJAHR = P_SPMON+0(4).
    Get plant distinction warehouse/production
      PERFORM GET_PLANT_DISTINCTION.
    Collect the data from various tables
      PERFORM GETDATA_FG_STOCK.
    here the number of rows in the output table is found
      PERFORM OUTPUT_TABLE_CHECK.
    here the top of the page code is written, that is to be displayed
    in the output
      PERFORM Z_TOP_OF_PAGE.
    here ALV layout properties are set
      PERFORM Z_LAYOUT_SETTINGS.
    ALV EVENTS for TOP OF PAGE and for USER COMMAND
      PERFORM Z_ALV_EVENTS.
    The field catalog is defined for the Primary List is defined in
    the subroutine CREATE_FIELD_CATALOG include program ZPRRDOCR_FCAT
      PERFORM Z_CREATE_FIELD_CATALOG.
    This is for displaying the output
      PERFORM Z_REUSE_ALV_GRID_DISPLAY.
    *& Form getdata_fg_stock
    Getting data from standard tables
    FORM GETDATA_FG_STOCK.
    For getting the Start date & end date of the month
    PERFORM get_month_dates.
    Getting the Opening Stock from MARDH table
      IF MON EQ '01'.
        MON1 = MON.
        FYEAR1 = FYEAR.
        MON = '12'.
        FYEAR = FYEAR - 1.
      ELSE.
        MON1 = MON.
        FYEAR1 = FYEAR.
        MON = MON - 1.
        FYEAR = FYEAR.
      ENDIF.
      PERFORM GET_RECORDS_FROM_DB.
    *added for Month Summary on 26.4.05.
      LOOP AT R_BUDAT.
        S_BUDAT-LOW = R_BUDAT-LOW.
        S_BUDAT-HIGH = R_BUDAT-HIGH.
    *for Month
        P_SPMON0(4) = S_BUDAT-LOW0(4).
        P_SPMON4(2) = S_BUDAT-LOW4(2).
    *for summary.
        IF Y1 = 'X'.
          LOOP AT S_BUDAT.
            S_BUDAT1-SIGN = 'I'.
            S_BUDAT1-OPTION = 'NB'.
            S_BUDAT1-LOW = S_BUDAT-LOW.
            S_BUDAT1-HIGH = S_BUDAT-HIGH.
            APPEND S_BUDAT1.
            CLEAR S_BUDAT1.
          ENDLOOP.
        ENDIF.
        IMKPFT[] = I_MKPF[].
        IMKPFT2[] = I_MKPF[].
        IMARDT[] = I_MARD[].
        IMARDHT[] = I_MARDH[].
        PERFORM MONTH_WISE.
        PERFORM PROCESS_MOVEMENTS.
        PERFORM CALCULATE_OPENING_STOCK.
        PERFORM UPDATE_NON_TRANSACTION_ITMS.
        PERFORM DELETE_EMPTY_RECORDS.
        CLEAR: IMARDHT,IMARDT,IMKPFT1,IMKPFT,I_FINAL,I_FINAL5.
        REFRESH: IMARDHT,IMARDT,IMKPFT1,I_FINAL,I_FINAL5,IMKPFT.
      ENDLOOP.
      CLEAR: R_BUDAT.
      REFRESH: R_BUDAT.
    *end of changes for month.
    ENDFORM. " getdata_fg_stock
    FORM MONAT_F4 *
    F4-Hilfe für Monat *
    FORM MONAT_F4.
      DATA: BEGIN OF MF_DYNPFIELDS OCCURS 1.
              INCLUDE STRUCTURE DYNPREAD.
      DATA: END OF MF_DYNPFIELDS.
      DATA: MF_RETURNCODE LIKE SY-SUBRC,
             MF_MONAT LIKE ISELLIST-MONTH,
             MF_HLP_REPID LIKE SY-REPID.
      FIELD-SYMBOLS: .
    Wert von Dynpro lesen
      GET CURSOR FIELD MF_DYNPFIELDS-FIELDNAME.
      APPEND MF_DYNPFIELDS.
      MF_HLP_REPID = SY-REPID.
      DO 2 TIMES.
        CALL FUNCTION 'DYNP_VALUES_READ'
          EXPORTING
            DYNAME               = MF_HLP_REPID
            DYNUMB               = SY-DYNNR
          TABLES
            DYNPFIELDS           = MF_DYNPFIELDS
          EXCEPTIONS
            INVALID_ABAPWORKAREA = 01
            INVALID_DYNPROFIELD  = 02
            INVALID_DYNPRONAME   = 03
            INVALID_DYNPRONUMMER = 04
            INVALID_REQUEST      = 05
            NO_FIELDDESCRIPTION  = 06
            UNDEFIND_ERROR       = 07.
        IF SY-SUBRC = 3.
    Aktuelles Dynpro ist Wertemengenbild
          MF_HLP_REPID = 'SAPLALDB'.
        ELSE.
          READ TABLE MF_DYNPFIELDS INDEX 1.
    Unterstriche durch Blanks ersetzen
          TRANSLATE MF_DYNPFIELDS-FIELDVALUE USING '_ '.
          EXIT.
        ENDIF.
      ENDDO.
      IF SY-SUBRC = 0.
    Konvertierung ins interne Format
        CALL FUNCTION 'CONVERSION_EXIT_PERI_INPUT'
          EXPORTING
            INPUT         = MF_DYNPFIELDS-FIELDVALUE
          IMPORTING
            OUTPUT        = MF_MONAT
          EXCEPTIONS
            ERROR_MESSAGE = 1.
        IF MF_MONAT IS INITIAL.
    Monat ist initial => Vorschlagswert aus akt. Datum ableiten
          MF_MONAT = SY-DATLO(6).
        ENDIF.
        CALL FUNCTION 'POPUP_TO_SELECT_MONTH'
          EXPORTING
            ACTUAL_MONTH               = MF_MONAT
          IMPORTING
            SELECTED_MONTH             = MF_MONAT
            RETURN_CODE                = MF_RETURNCODE
          EXCEPTIONS
            FACTORY_CALENDAR_NOT_FOUND = 01
            HOLIDAY_CALENDAR_NOT_FOUND = 02
            MONTH_NOT_FOUND            = 03.
        IF SY-SUBRC = 0 AND MF_RETURNCODE = 0.
    ASSIGN (MF_DYNPFIELDS-FIELDNAME) TO <MF_FELD>. " ==>> note 148804
    <MF_FELD> = MF_MONAT.
          CALL FUNCTION 'CONVERSION_EXIT_PERI_OUTPUT'
            EXPORTING
              INPUT  = MF_MONAT
            IMPORTING
              OUTPUT = MF_DYNPFIELDS-FIELDVALUE.
          COLLECT MF_DYNPFIELDS.
          CALL FUNCTION 'DYNP_VALUES_UPDATE'
            EXPORTING
              DYNAME               = MF_HLP_REPID
              DYNUMB               = SY-DYNNR
            TABLES
              DYNPFIELDS           = MF_DYNPFIELDS
            EXCEPTIONS
              INVALID_ABAPWORKAREA = 01
              INVALID_DYNPROFIELD  = 02
              INVALID_DYNPRONAME   = 03
              INVALID_DYNPRONUMMER = 04
              INVALID_REQUEST      = 05
              NO_FIELDDESCRIPTION  = 06
              UNDEFIND_ERROR       = 07. "<<== note 148804
        ENDIF.
      ENDIF.
    ENDFORM.                                                    "MONAT_F4
    *& Form get_month_dates
    Calculating the Month Start & End Date
    FORM GET_MONTH_DATES.
      IF M1 = 'X'.
        FYEAR = P_SPMON+0(4).
        MON = P_SPMON+4(2).
        CONCATENATE FYEAR MON '01' INTO R_BUDAT-LOW.
        R_BUDAT-SIGN = 'I'.
        R_BUDAT-OPTION = 'BT'.
        CALL FUNCTION 'BKK_GET_MONTH_LASTDAY'
          EXPORTING
            I_DATE = R_BUDAT-LOW
          IMPORTING
            E_DATE = R_BUDAT-HIGH.
        APPEND R_BUDAT.
        CLEAR S_BUDAT.
        REFRESH S_BUDAT.
        S_BUDAT-SIGN = 'I'.
        S_BUDAT-OPTION = 'BT'.
        S_BUDAT-LOW = R_BUDAT-LOW.
        S_BUDAT-HIGH = R_BUDAT-HIGH.
        APPEND S_BUDAT.
      ELSE.
        FYEAR = P_SPMON+0(4).
        MON = P_SPMON+4(2).
        CONCATENATE FYEAR MON '01' INTO R_BUDAT-LOW.
        R_BUDAT-SIGN = 'I'.
        R_BUDAT-OPTION = 'BT'.
        CALL FUNCTION 'BKK_GET_MONTH_LASTDAY'
          EXPORTING
            I_DATE = R_BUDAT-LOW
          IMPORTING
            E_DATE = R_BUDAT-HIGH.
        APPEND R_BUDAT.
      ENDIF.
    ENDFORM. " get_month_dates
    *& Form output_table_Check
    checking for records for output
    FORM OUTPUT_TABLE_CHECK .
      DESCRIBE TABLE I_FINALT LINES INDEX.
      IF INDEX EQ 0.
        MESSAGE I041 WITH TEXT-005.
        LEAVE LIST-PROCESSING.
      ENDIF.
    ENDFORM. "OUTPUT_TABLE_CHECK
    *& Form Z_TOP_OF_PAGE
    for setting the details in the top of page *
    has no formal paramters *
    FORM Z_TOP_OF_PAGE.
      DATA: V_MON(2),
      V_YR(40),
      V_FIN(18),
      V_FIN1(48),
      LOW(10),
      HIGH(10).
      V_MON = P_SPMON+4(2).
      V_YR = P_SPMON+0(4).
      FHEADER-TYP = 'H'.
      FHEADER-INFO = 'Stock Register Report (FG Stock)'.
      APPEND FHEADER.
      CLEAR FHEADER.
    *if m1 = 'X'.
    CONCATENATE 'Month = ' v_mon '.' v_yr INTO v_fin.
    fheader-typ = 'H'.
    fheader-info = v_fin.
    APPEND fheader.
    CLEAR fheader.
    *endif."prabhu on 18.5.5
      IF D1 = 'X'.
        CLEAR S_BUDAT.
        LOOP AT S_BUDAT.
          CONCATENATE S_BUDAT-LOW6(2) '/' S_BUDAT-LOW4(2) '/'
          S_BUDAT-LOW+0(4) INTO LOW.
          CONCATENATE S_BUDAT-HIGH6(2) '/' S_BUDAT-HIGH4(2) '/'
          S_BUDAT-HIGH+0(4) INTO HIGH.
          CONCATENATE 'Date = ' LOW ' - ' HIGH INTO V_FIN1.
          FHEADER-TYP = 'H'.
          FHEADER-INFO = V_FIN1.
          APPEND FHEADER.
          CLEAR FHEADER.
        ENDLOOP.
      ENDIF.
    ENDFORM. " Z_TOP_OF_PAGE
    *& Form Z_LAYOUT_SETTINGS
    this is done for setting the properties for the layout of the *
    grid *
    has no formal paramters *
    FORM Z_LAYOUT_SETTINGS.
      FS_LAYO-ZEBRA = 'X'. " Output in Zebra pattern
      FS_LAYO-DETAIL_POPUP = 'X'. " A popup window appears to give
      FS_LAYO-DETAIL_TITLEBAR = TEXT-022.
      FS_LAYO-COLWIDTH_OPTIMIZE = 'X'.
    ENDFORM. " Z_LAYOUT_SETTINGS
    *& Form Z_ALV_EVENTS
    This is used for handling the events TOP OF PAGE and the USER *
    COMMAND event *
    has no formal paramters *
    FORM Z_ALV_EVENTS.
      CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
        EXPORTING
          I_LIST_TYPE = 0
        IMPORTING
          ET_EVENTS   = FEVENTS[].
      READ TABLE FEVENTS WITH KEY NAME = 'TOP_OF_PAGE'.
      IF SY-SUBRC = 0.
        FEVENTS-FORM = 'Z_TOPOFPAGE'.
        MODIFY FEVENTS INDEX SY-TABIX.
        CLEAR FEVENTS.
      ENDIF.
      READ TABLE FEVENTS WITH KEY NAME = 'USER_COMMAND'.
      IF SY-SUBRC = 0.
        FEVENTS-FORM = 'Z_USER_COMMAND'.
        MODIFY FEVENTS INDEX SY-TABIX.
        CLEAR FEVENTS.
      ENDIF.
    ENDFORM. "Z_ALV_EVENTS
    *& Form Z_CREATE_FIELD_CATALOG
    here the field catalog is created for the primary list *
    no formal parameters *
    FORM Z_CREATE_FIELD_CATALOG.
    for the Plant
      FCAT-FIELDNAME = 'WERKS'.
      FCAT-KEY = 'X'.
      FCAT-OUTPUTLEN = '000005'.
      FCAT-JUST = 'L'.
      FCAT-SELTEXT_M = 'Plant'.
      FCAT-DDICTXT = 'M'.
      FCAT-INTTYPE = 'C'.
      FCAT-DATATYPE = 'CHAR'.
      APPEND FCAT.
      CLEAR FCAT.
    for the Material Type
      FCAT-FIELDNAME = 'MTART'.
      FCAT-KEY = 'X'.
      FCAT-OUTPUTLEN = '000006'.
      FCAT-JUST = 'L'.
      FCAT-SELTEXT_M = 'MatTyp'.
      FCAT-DDICTXT = 'M'.
      FCAT-INTTYPE = 'C'.
      FCAT-DATATYPE = 'CHAR'.
      APPEND FCAT.
      CLEAR FCAT.
    for the Material No.
      FCAT-FIELDNAME = 'MATNR'.
      FCAT-KEY = 'X'.
    fcat-hotspot = 'X'.
      FCAT-OUTPUTLEN = '000018'.
      FCAT-JUST = 'L'.
      FCAT-SELTEXT_M = 'Material'.
      FCAT-DDICTXT = 'M'.
      FCAT-INTTYPE = 'C'.
      FCAT-DATATYPE = 'CHAR'.
      APPEND FCAT.
      CLEAR FCAT.
    for the Material Description
      FCAT-FIELDNAME = 'MAKTX'.
      FCAT-KEY = ''.
      FCAT-OUTPUTLEN = '000040'.
      FCAT-JUST = 'L'.
      FCAT-SELTEXT_M = 'Description'.
      FCAT-DDICTXT = 'M'.
      FCAT-INTTYPE = 'C'.
      FCAT-DATATYPE = 'CHAR'.
      APPEND FCAT.
      CLEAR FCAT.
    for the Unit of Measure
      FCAT-FIELDNAME = 'MEINS'.
      FCAT-KEY = ''.
      FCAT-OUTPUTLEN = '03'.
      FCAT-JUST = 'C'.
      FCAT-SELTEXT_M = 'UOM'.
      FCAT-DDICTXT = 'M'.
      FCAT-INTTYPE = 'C'.
      FCAT-DATATYPE = 'UNIT'.
      APPEND FCAT.
      CLEAR FCAT.
    for the Plant
      FCAT-FIELDNAME = 'MONTH'.
      FCAT-KEY = 'X'.
      FCAT-OUTPUTLEN = '08'.
      FCAT-JUST = 'L'.
      FCAT-SELTEXT_M = 'MONTH'.
      FCAT-DDICTXT = 'M'.
      FCAT-INTTYPE = 'C'.
      FCAT-DATATYPE = 'CHAR'.
      APPEND FCAT.
      CLEAR FCAT.
    for the Opening Stock
      FCAT-FIELDNAME = 'C_STK'.
      FCAT-HOTSPOT = ' '.
      FCAT-OUTPUTLEN = '000016'.
      FCAT-JUST = 'L'.
      FCAT-SELTEXT_M = 'Opening Stock'.
      FCAT-DDICTXT = 'M'.
      FCAT-INTTYPE = 'Q'.
      FCAT-DATATYPE = 'QUAN'.
    fcat-do_sum = 'X'.
      FCAT-JUST = 'R'.
      FCAT-NO_ZERO = 'X'.
      APPEND FCAT.
      CLEAR FCAT.
    for the Total Receipts
      FCAT-FIELDNAME = 'TRECEP'.
      FCAT-HOTSPOT = ' '.
      FCAT-OUTPUTLEN = '000016'.
      FCAT-JUST = 'L'.
      FCAT-SELTEXT_M = 'Total Receipts'.
      FCAT-DDICTXT = 'M'.
      FCAT-INTTYPE = 'Q'.
      FCAT-DATATYPE = 'QUAN'.
      FCAT-DO_SUM = 'X'.
      FCAT-JUST = 'R'.
      FCAT-NO_ZERO = 'X'.
      APPEND FCAT.
      CLEAR FCAT.
    for the Production
      FCAT-FIELDNAME = 'PRODU'.
      FCAT-HOTSPOT = ' '.
      FCAT-OUTPUTLEN = '000016'.
      FCAT-JUST = 'L'.
      FCAT-SELTEXT_M = 'Production'.
      FCAT-DDICTXT = 'M'.
      FCAT-INTTYPE = 'Q'.
      FCAT-DATATYPE = 'QUAN'.
      FCAT-DO_SUM = 'X'.
      FCAT-JUST = 'R'.
      FCAT-NO_ZERO = 'X'.
      APPEND FCAT.
      CLEAR FCAT.
    for the Other Plant Receipts
      FCAT-FIELDNAME = 'RECEP'.
      FCAT-HOTSPOT = ' '.
      FCAT-OUTPUTLEN = '000016'.
      FCAT-JUST = 'L'.
      FCAT-SELTEXT_M = 'Othr Plnt Recpts'.
      FCAT-DDICTXT = 'M'.
      FCAT-INTTYPE = 'Q'.
      FCAT-DATATYPE = 'QUAN'.
      FCAT-DO_SUM = 'X'.
      FCAT-JUST = 'R'.
      FCAT-NO_ZERO = 'X'.
      APPEND FCAT.
      CLEAR FCAT.
    Sales Return
      FCAT-FIELDNAME = 'SAL_RET'.
      FCAT-HOTSPOT = ' '.
      FCAT-OUTPUTLEN = '000016'.
      FCAT-JUST = 'L'.
      FCAT-SELTEXT_M = 'Sales Return'.
      FCAT-DDICTXT = 'M'.
      FCAT-INTTYPE = 'Q'.
      FCAT-DATATYPE = 'QUAN'.
      FCAT-DO_SUM = 'X'.
      FCAT-JUST = 'R'.
      FCAT-NO_ZERO = 'X'.
      APPEND FCAT.
      CLEAR FCAT.
    Total Dispatches
      FCAT-FIELDNAME = 'TDISP'.
      FCAT-HOTSPOT = ' '.
      FCAT-OUTPUTLEN = '000016'.
      FCAT-JUST = 'L'.
      FCAT-SELTEXT_M = 'Total Dispatches'.
      FCAT-DDICTXT = 'M'.
      FCAT-INTTYPE = 'Q'.
      FCAT-DATATYPE = 'QUAN'.
      FCAT-DO_SUM = 'X'.
      FCAT-JUST = 'R'.
      FCAT-NO_ZERO = 'X'.
      APPEND FCAT.
      CLEAR FCAT.

  • Opening Stock and Closing Stock Calculation

    Hi,
         My report requirement is to display the material, opening stock for the lower date, closing stock for the higher date and the in between all stock operations..how to fetch the opening stock and closing stock for a particular  material ???.. what are the tables and fields for calculating them??..
    Thanks,
    Sri
    Edited by: Sri on Feb 13, 2009 8:33 AM

    Hi
    We have done a similar reports. One showing opening stock/Closing stock and another one showing all the transactions for a particular day. What we did was we developed a program to fetch data from MARD table for unrestricted, blocked & Qulaity stock(Our requirement talks only about these 3 stocks). And we scheduled the program exactly at system time 00.00 hrs with A class job.(today's closing day stock is nothing but tomorrow's opening stock)
      And for the second report which needs to pick all the transaction for a particular day, we picked it from MB51 entries. It is nothing but query between MKPF and MSEG.
    I hope this helps.

  • Custom Report for the Stock and Stock value for a specific date

    Hi SAP Gurus,
    Is there any SAP standard t-code or any logic to get the transcations (additions (for example: Purchases) and subtractions (Sales) to the inventory) for a particular materials in a plant and with Total Stock and also Total Stock value when that particular transaction happened?
    Our system is R/3 4.7
    I looked at the MB5B, MBCE, MBCA, MC44, MB51 and some other standard T-codes but could not find the total stock value at the time of Transaction happened.
    The history tables MBEWH and MARDH  are updated after the month end closing procedures, right, which means I will have the inventory value changing every month if material has Price "S".
    Thank you,
    -Harter

    Hi Harter,
    Unfortunately, you cannot see in a single tcode the value of stock and stock quantity on a specific date. As you yourself have pointed out, we only have to make use of the history table MBEWH, MARDH for the month wise stock quantity and value. Along with that you should also make use of the table MBEW to take teh stock quantity and value. So the total value of stock on a particular date will be
    Stock qnty = MBEWH value until the previous month (for teh specific valuation class, period etc) + MBEW value for the present date.
    But this will nto work out if you want to find out teh stock quantity and stock value on a past date basis. For past data, only  m onthwise data is available. For this anyway you can refer to MC.1 and so on reports.

  • Report on current stock and safety stock

    Hi,
    I want to have the report on current stock and safety stock.
    In MC.9 it gives wrong safety stock. When I go to cross check the safety stock in material master & in MC.9 I see differences.
    Thanks,
    Kiran

    You can user tcode MC.9 or MC.5 to know valuated stock available at given plant. Stock lying in Returns (MB52) will not be a part of this report as it non-valuated stock.
    The stock in the accounting view of the material master considers stock at plant level including stock in Transit (Intra & Inter plant stock trasnfers) & special stock like stock issued to vendor , consigment stock etc which is valuated at plant level.
    whereas and stock in the plant stock view of the material master does not consider such special stocks hence there will always difference in both veiws.
    For Physical stock as on particular date you can consider MB5B report with radio button "Storage location/Batch Stock" wherein you will get Quantity issued & Qunatity received in those SLOC along with Opening stock & Closing stock for the specified period.
    use tcode
    MBLB to know stock at vendor.
    MB54 - Consignment Stock.

  • Stock report in BW (valuated stock and Storage Location level)

    Dear All,
                Regards.We got an situation here,
    Case 1:  R3 (MB5B) (Both "Storage loc" and "Valuated stock" shows the same Stock Qty)
    1).The BW Stock Report shows values the Correct Values for "Receipt Qty" and "Issue Qty" with the Correct  "Quantity total Stock" aswell.
    Case 2 :   R3 (MB5B) (Stock is different between "Storage Loc" and "Valuated Stock")
    1).The BW Stock Report shows the  "Quantity Total Stock according to VALUATED STOCK Level(MB5B),but  the "Receipt Qty" and "Issue Qty" according to STORAGE LOCATION Level(MB5B) .
    We followed the "How to Handle Inventory "Doc with the proper sequence of Loading of Infosources and Compression.The data is sitting fine at the cube level.
    It would be great if someone can throw some Light on this issue,on how the Query shows a COMBO of both Valuated stock and Storage Location stock....Held up with this issue for quite sometime..Had a look at the   Oss Note (589024)...........
    Manythanks
    Arun

    HI,
    In Inventory we have two quantity fields given to satisfy the requirement.
    Valuated stock Qty - 0VALSTCKQTY
    Storage Location qty - 0TOTALSTCK
    You can make use of them based on your requirement. Hope this helps for you.
    Thanks,
    Arun

Maybe you are looking for