Report or Function Moule to delete a BEX Report ?

Hi,
is there a program, report or function module to delet a report ?
Thank You
Best Wishes
Martin

Hi martin ,
U can able to delete the query from BEx query designer or from BI.
IN sap Bex query designer, just by opening the query menu -->delete query .
the other way to delete the query is BY using the table RSZDELETE . with that u can able to delete the bex query, CKF, RKF etc..
plz follow the below link for detail
http://dev.diditho.net/2010/07/05/sap-bw-copy-delete-query-and-workbook/
Thanx
Edited by: Ravichandra.bi on Aug 22, 2011 8:14 PM
Edited by: Ravichandra.bi on Aug 22, 2011 8:19 PM

Similar Messages

WEBI Report values Double as compared to BI/BEX Report.........

Hi,
I am trying a report in BOBJ. When I run the WEBI report it doubles the Column values as compared to BI report. There are no filters, conditions or anything in the report. Tried purging the data and running the report but no change. has anyone come across this situation and if so how did you resolve it? Please let me know.
Thanks...... ShruMaa

Hello Shruti,
as you refer to a Webi problem I recommend to post this query to the [BusinessObjects Web Intelligence|SAP BusinessObjects Web Intelligence; forum.
This forum is dedicated to topics related to the creation and design of Web Intelligence documents using the Web Intelligence Report Panels. This includes areas such as universe connectivity, prompts, charting, formatting, filters, and formulas.
It is monitored by qualified technicians and you will get a faster response there.
Also, all Webi queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

Best approach to "migrate" from BEX reports to Webi reports ?

Hello,
i have read lots of documents regarding best practices on how to built webi reports and universes on top of BW.
But i can't find any document about best approach, not in performance way of thinking but in best way of using reports.
i mean: when end users are coming from bex reports (where they can drill down through hierarhies and use free filters ) to webi reports (where layout is quite beatiful and user can change it easely), this is not the same way of consuming reports.
I come from BO world and are new on reporting on top of BW.
for me webi is good for quite static layout reporting where data is clear and available.of course you can have prompts for interactivy and more accurate reporting. Drill down is just a functionality but is not the real purpose of the report tool.
So ,according to me there is a gap between both tools (BEX and WEBI) but end users are the same.
So i 'm wondering if you have any feedback for the best approach to build webi reports where end users are coming from bex reporting.
And how to choose between prompts, drill-down (with available filters on top of the window), fold/unfold and input controls or just having diffrent levels of hierarchies in the table/ section/ breaks but without drill down (because if you drill down, report begins weird with diffrent levels) ...?
So , if you have any feedback , advise....
thanks in advance,
Rgds,

Hi,
WEBI don't replace BEX reports, is for different audience, in fact BEX is for OLAP reports and analysis.
You can find some answer in this page
[FAQ: The Future of SAP NetWeaver Business Intelligence in the Light of the NetWeaver BI & Business Objects Roadmap|FAQ - The Future of SAP NetWeaver Business Intelligence in the Light of the NetWeaver BI&Business Objects Roadmap [original link is broken]|FAQ]
spercific for What is the future of the BEx Query Designer? you can read here
[FAQ - The Future of SAP NetWeaver Business Intelligence in the Light of the NetWeaver BI&Business Objects Roadmap [original link is broken]#section11] and here [FAQ - The Future of SAP NetWeaver Business Intelligence in the Light of the NetWeaver BI&Business Objects Roadmap [original link is broken]#section3]
The idea is to use the rigth tool for the rigth job.
You can find more information here [http://www.sdn.sap.com/irj/sdn/edw], [http://www.sap.com/solutions/sapbusinessobjects/index.epx], [http://www.sap.com/solutions/sapbusinessobjects/newsevents/index.epx], [http://www.sap.com/community/flash/BusinessIntelligenceAGuideforMidsizeCompanies.pdf]
I hope this help you.
Best regards.

Bex Report Designer is not previewing changes in QA

Hi All,
Please help... i am getting an unusual problem with bex report designer. I have created a bex report using report designer. This was then transported in to QA. In QA i opened my created report using report designer and clicked the print version button to preview the report in PDF format. This all worked correclty, however i noticed a spelling mistake in one of the custom text fields i am using.
So i put the report in a transport in dev, made the changes in dev and previewed in dev. Everything is ok here and i can see the change i made.
After this i transported the report to QA and when i open the report in report designer to preview the data i can see in design mode that the custom text field does HAVE the change i made so it is correct. The problem i am getting is though when i preview to see in PDF format the image i get is of the old preview with the spelling mistake.
SInce i have made more changes and i can see the changes in DEV and in QA in design mode but when i preview it shows me the old image from the 1st preview.
Please can anyone shed any light into this issue.
Kind regards
Forhad

Refreshed the JAVA server resolved issue

KF value is not Displayed in BEx Report ..where as cube, mpro end ok..!!

Hello Experts,
I ran a bex report. In that report KF some NetsSalesValue has not displayed in the BI Report for all the Sales Organiations where as other KFs has displayed the value for all the Sales Organizations.
For that i checked my end. BI report is pulling data from Cube --> Multiprovider --> Bex Report.
I myself checked KF value into Cube level, multiprovider KF level value is avaialable.
And also i checked, in the query properties is there any filters, RKF, CKF, but...i found the KF is a basic KF.
And also..i checked the whether the rollup has happened..properly or not and ran the query but no use.
For your info upto 3 days..back KF value has presented in the report. After that only this issue has encounterred.
I am in confusion where the exact issue will be.
If any body faced this kind of scenario is your project, kindly reply me.
For any more clarifications i will respond you immediately.
Thanks,
SN

Hi,
check aggregates,index etc for cube
check key figure selection as well in Multiprovider for respective Infoprovider
just create test query on Infoprovider and then on Multiprovider and see..
Check RSRT - regenerate the query
also see there are various options like execute+debug has ....just check them
Thanks and regards
Kiran

BW (BEX) Reports Vs Crystal Reports

Hello,
Could any one please let me know Breif about the Crystal Reports
Introduction of Crystal reports and how they differ from BW(BEx) Reports
Thanks

You can find some information in www.businessobjects.com or www.crystalreports.com for example the following.
http://www.businessobjects.com/global/pdf/solutions/xi_sap_insight.pdf

Bex Report Autosave?

Dear Friends ,
I have SD reports in BI,it is taking time to run reports.is there any possible to save bex reports automatically by giving desired location,so that my users open that folder and can see the reports.
Thnx
Seshagiri

Why don't you try saving them as workbook which user can access from the server.
You can broadcast them to user's mailbox daily with refreshed data automatically.

Delete hash value row in Bex report output

Hi All,
Can anybody suggest how can i remove hash value(not assigned) row in Bex report out put.
my report looks like this:
rows
project position
(hierarchy)
WBS element
(hierarchy)
Order
For each Project position and WBS element hierarchies, i did supress the " not assigned" tick in hiearchy attributes in RSH1.
but in colums i have budget as one of the column.
this budget comes from project position nodes to last node of WBS element but not in order, for order it will be blank but after this order a new row coming up with bold" Not assigned" with that budget amount against this not assigned.
My problem is how can i get rid of this not assinged entire row. I search so many links in SDN, they talk about just to replace the not assigned to some other value as blank or something like that.
Please suggest me how can i get rid of this.
i did tried to restrict Order with "#" but then the whole budget column getting blank.
Regards
Robyn.

HI Arun,
As i mentioned earlier, i have gone through these links, they just talk about replacing # value or Not Assigned to some other value or blank.
my issue is i need to get rid of that entire row.
when i drop proj def hierarchy ,then wbs hierachy starts, sometimes at the end of wbs hierarchy i get row with #
and sometimes after wbs hierarchy ,then order row then # row is coming.
even after i tick supress unassigned nodes in both Projdef and wbs hierarchies.
i am not supposed to simply replace #( not assigned) symbol or text with some other symbol or text ( thats what they discussing in these links).
i created that macro they said in those links but its just deleting # symbol to blank not the whole row.
hope i made my issue clear.
i have seen so many other links as well
[Re: Bex macros]
Regards
Robyn.

Deletion of filter components from Bex Report in BI 7.0 via back end.

Hi,
I want to delete 2 filter field components from the BI 7.0 report via back end. Im using the Tcode RSZDELETE and giving the variable element UID, Inforprovide name, query tech name. But when i excute it says empty selection.
Other than this is there any way to delete query components at back end???
Regards,
Nisha

Thanks for the reply!
This is to delete the variable created??
My requirement is query specific , the restriction on the IO , ie the variable to be removed via back end.. that means deletion from that report..
hope my statement is clear enough to give me some light .
Thanks
Nisha

RFC connection Error While run BEx Report

Hi All
I got BI 7.0 and create new user with roles only access: TR: RRMX to see only BEx Reporting... I create basically new customize role and put only one transcation code RRMX and assigned to user...
When goto BEx designer I got that error
rfc error received user has no rfc authorization for function group syst.
I am not sure what kind of authrouzation user need to only view BEx Reporting...
But when I put SAP_ALL in that profile same user, thats works fine, but I don't want to give SAP_ALL to user...
2nd question same look like BEx Analyzer the side bar when I click open nothing happend and it writedown like German language..
Please advised

Hi Alls
I am Angeline again, I resolved that problem and want to shair with you guys....
1.     Tr: PFCG and click on Maintain roles
2.     Role Name: Z_RUN_QUERIES
3.     Click on Authorization Tab Saved Entry
4.     In Edit mode Select the template: S_RS_RREPU and adopt reference (Business Content)
5.     Expand u2018Business Explorer u2013 Componentsu2019
6.     Selected: u201CType of a reporting component Calculated key figure, query restricted
7.     key figure u2013 template structure and click on Edit
8.     Un-Check REP Query
9.     Generate the Profile
10.     Create Transport number
11.     click on user TAB and define user name in it
12.     click User compare and complete compare and saved the entry
13.     TR: SU01 in User click on Roles and define Z_RUN_QUERIES and profile
Thanks

Short Dump when the Bex-Report scheduled for Broadcast

Hi Guru's
I am getting the short dump when I am scheduling the Bex-Report for Broadcasting. Need your help to reslove this issue.
Thanks
Navin
Note
The following error text was processed in the system BDV : The current application triggered a termination with a short dump.
The error occurred on the application server spdbwd01_BDV_05 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Form: INTERNAL_ERROR of program SAPLSDCL
Form: PHIO_GET_CONTENT_ACCESS of program SAPLSDCI
Function: SDOK_PHIO_GET_CONTENT_ACCESS of program SAPLSDCI
Function: SKWF_PHIO_CONTENT_ACCESS_GET of program SAPLSKWF_CONTENT
Method: COPY_MIME_TO_FOLDER of program CL_RSRA_KWF_UTILITIES=========CP
Method: GET_STYLESHEET of program CL_RSRA_KWF_TMPL==============CP
Method: CONSTRUCTOR of program CL_RSRA_KWF_TMPL==============CP
Method: SET_TEMPLATE_FOLDER of program CL_RSRA_ENGINE_BC=============CP
Method: CONSTRUCTOR of program CL_RSRA_ENGINE_BC=============CP
Method: EXECUTE_SINGLE of program CL_RSRA_JOB===================CP

HI Navin,
Check the short dump analysis in T-code ST22.
and also check the Information Broadcast Settings / Configuration
Check the error for Emails in t-code SCOT. BASIS Consultants will help you on this issue.
Regards
Daya Sagar

Is it possible to Display BW Bex report iviews in Tabbed Interface?

Hi,
Is their a way to display BW BEx Report Iviews in Tabbed Interface?
My requirement is to show four BEx Reports using 4 tabs on a page. Can we achieve this functionality in portal? If yes can some one guide me how to proceed?
Regards
Sai Krishna Reddy

why not have a webtemplate with tabbed interace and use that webtemplate to create BWP iview?
check out the following how to document on this subjec.
<a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5074a890-0201-0010-a489-dd05902a28c8">How to Create Buttons and TabStrips in BI Web Applications</a>
Regards
Raja

Date Format Issue IN BEX REPORT

Hi Experts,
we are working on BW 3.5.
we have a ODS where data is uploaded through flat file and there are 5 to 7 date field all made of Z infoobjects.
So now the user is putting the data for these Date fields as 20110901 = 1st sep2011. but in report its coming as 09/01/2011
when i checked all the Z fields that are created for this date fields have reference character as Date
only one field is character so it is coming correct as given by the user
but rest all are appearing in different format . In ODS also the date is coming as 09/01/2011
now the user want all the data to be in the same format as given by HIM.
I cant even change the properties of these Z info object removing the reference info object 0Date and make them character string.
so now please suggest how to upload the date given by the user as it is without changing the format and also how to change the format for the back data as its flat file so No data can be deleted.
thankkkkkkkks

hello
Bex analyzer is an excel add-in. Date formats are based on your regional settings.
If you want to have a different date format in the sap gui then you have to change your user profile in sap system.
Flat file upload needs the date format in a database format (YYYYMMDD).
You can transform the date in the transformation step with rules or with a routine( abap coding).
Thank you
Yiannis

BEx report : Time diff HH:MM average Issue

Hello Guys
below is my Issue with BEx report.
I have a table with has d1 and d2 and t1 and t2.
I want the diff between them in only HH:MM, using any of the function modules.
I have got the HH:HH value into my DSO.
Then I converted the HH:HH into HH:MM in the BEx.
Now my report requirement.
I want to display the report with yearly , monthly and daily information -
let say my boss wants to compare Average time ( HH:MM) between June and July of 2007.
the report should be
year ++++++++ month ++++++ daily ++++++++ rec#++++++++ diff
2007++++++++ June++++++++ 01++++++++ 123++++++++ 31.36
2007++++++++ June++++++++ 01++++++++ 124++++++++ 11.23
2007++++++++ June ++++++++ 03 ++++++++ 152 ++++++++ 18.21
2007++++++++ July ++++++++ 01++++++++ 157 ++++++++ 12.27
2007++++++++ July++++++++ 08 ++++++++ 124 ++++++++ 15.33
now when you look at the above report layout.....what i want is to display the average time ( diff) for month of june and july.
so the average time diff of the month of june will be ( total time / record count ). same for july.
so the result should be for
JUNE - (32.36 + 11.23 + 18.21) / 3
JULY - (12.27+15.33) / 2
also it should convert the decimals (MM) into hours after 60.
I am getting the sub total for month June as ((32.36 + 11.23 + 18.21) / 3).
Its not converting the MM in HH even after 60 Min. say for example its showning 40:67. but the correct value should be 41:07
hope you got my issue.could you please suggest the solution as to how can i get the correct value under the month sub- total.
thanks,
pratap.

Hello venku chittidi ,
Thanks for the reply.
But the User wants to display the values in HH:MM instead of MM.
would it be possible to calcuate HH:MM from HH:HH in the transformation.
thanks
pratap.

Which function module to delete job log?

Hi, I submit report via jobname and jobcount. After I close job and run it, we can see jobname is still in job log by SMX. But client doesn't want to see it, so who can kindly tell me which function module can delete jobname from job log?
Thanks a lot.
Jack

try CALL FUNCTION 'BP_JOB_DELETE'
If you have used JOB_OPEN before the SUBMIT to create the job, you can automatically delete the job upon successful completion by setting the parameter DELANFREP = 'X' in the JOB_OPEN function call.. this way the user will only see the logas for cancelled/aborted jobs..
~Suresh
Message was edited by: Suresh Datti

Report or Function Moule to delete a BEX Report ?

Similar Messages

Maybe you are looking for