Report Output appears diffrently

Hi,
The alignment of the labels Report Output appears differently in the different 3 views:
a) Report Output viewed on the screen.
b) Report Output viewed on the paper after screen.
c) Report Output viewed on the Layout Editor of the Report Writer.
If you have some solution or work around,Pl give the feedback.
Thanks & Regards
Vishal
null

user10101961 wrote:
Hi,
Oracle report output file getting line duplication. If its 2 line, the o/p get 4 lines. If its 3 lines, the o/p get 9 lines. If its 4 lines, the o/p get 16 lines. How to resolve this issue,
Regards
S.ArunWhat is the type of this concurrent program?
Can you post the code here?
Thanks,
Hussein

Similar Messages

BI Report output appear wider than normal

Hi,
We upgraded the BI system from BI 7.0 to BI 7.1. After upgrading the BI development system, we found some changes in the Web report output. One of them is below:
The columns (all columns, char and key figure) appear wider than normal. So we are wasting lot of space in the report. Is there any setting on the web template, or elsewhere, to u2018auto sizeu2019 the columns?
Please reply to this thread if you know the answer. Points will be assigned.
Thanks in advance,
PReddy

Hi PReddy,
you can use modification module com.sap.ip.bi.rig.ColumnWidth in the Web item analysis to set fixed column widths...
http://help.sap.com/saphelp_nw04s/helpdata/en/47/9fa3facf9e3c5ce10000000a421937/frameset.htm
Also check this notes on relevance if it is an upgrade error:
The column width for multiline header cells is too large
SAP Note Number: [1297254 |https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31323937323534%7d]
Column width is incorrect if line selection is activated
SAP Note Number: [1291760 |https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31323931373630%7d]
Column width is too wide if there is a hierarchy in column
SAP Note Number: [1321152|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31333231313532%7d]
Regards
Andreas

Discoverer report - Output from Discoverer plus is not the same as Discoverer desktop

As a part of Upgrade project we are migrating the discoverer reports from 11i (11.5.10.2) to R12 (12.1.3) .After migrating to R12, for a custom discoverer report the output given by discoverer desktop is correct (24 rows for a scenario). But the report output from Discoverer plus does not show the credit transactions (2 rows). The output from Discoverer plus shows only 22 rows (24 - 2), which is incorrect. The query is the same in Discoverer desktop and Discoverer plus.
Please let me know why these transactions that are appearing when the report is run from discoverer desktop are not appearing in discoverer plus. Is there any setup in discoverer plus for this?
Regards,
Brajesh

Pretty hard to answer a question like this. Best bet would be to copy the existing discoverer plus book and start removing conditions, fields, etc until those two rows from desktop show up and see if you can work it out.

Issue while downloading the alv report output in spreadsheet format .

Hi,
I have a report output, whenever I try to download it in the spreadsheet format to my desktop,
I get the following issue:
Say the correct material number is 10833340001218999 or 10030000063207001
(This appears in the report output)
But in the excel file the number is displayed as 10833340001218900 and 10030000063207000.
Please help.
Regards,
Sucharita.

Hi Sucharita,
The reason for your problem could be that in excel 2007, characters more that 15 are replaced with 0.
Or you can try downloading the data using FM 'GUI_DOWNLOAD' , if currently you are using stadard SAP functionality of data downloading.
Best Regards,
Vishal.

PDF Attachments in Report output.

Hi Gurus,
I have a Smartform Print program. My Business needs it the Smart form output is send to E-mail as PDF attachment.
But the exact requirement is ,
They need it a summury report before sending to E-mail.
In the report output The Smart form appears as an PDF atachment. If he clicks that attachment user can able to open and see the attachment. And beside the attachment there is one check box. If he checks the check box and click on E-mail button, then only the PDF should goes to E-mail as PDF attachment.
Here my question how we can place the PDF attachments in Report output.
If any one have suugestion or samle code send it to me.
Thanks and Regards
Srihari.

Hi,
If you have to display the pdf attachment in the report output, you may try using CL_GUI_PDFVIEWER. Have a look at this code sample as to how to implement it
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d8bb0975-0e01-0010-2192-bd1fffd80cae]
Regards,
Vikranth

Problem when dowloading the ALV report output to Excel Sheet.

Hi ,
I am dowloading the ALV report output to Excel Sheet.
There is field Condition Unit(KOMP-KMEIN) in the output of the ALV, this has values PC and CSE , but when I download to Excel Sheet, CSE is appearing as CSE ,but PC is appearing as ******.
Can you please help me in knowing the reson for this.
Regards,
Madhu.

hi
refer to following link
http://www.****************/Tutorials/ALV/ColorSALV/Demo.htm
http://www.sap-img.com/abap/download-to-excel-with-format-border-color-cell-etc.htm
Cheers
Snehi
Edited by: snehi chouhan on Jul 11, 2008 12:42 PM

Report output in XML format

Is it possible to save (or export) report output in XML format, it is ok with either WebI or DeskI report, here we are concerned about output format not what type of report we can use to produce the output in XML format.
Thank you,
Srini

Hi Srinivas,
Only options available in WEBI or DESKI is to save documents in Excel or PDF format.
As a workaround you can use Excel as an intermediate between your WEBI or DESKI document to XML format.
When you try to save WEBI document in XML Data format you may get following Error because the Excel sheet does not contain any XML format that requires.
u201CCan Not save XML data because the workbook does not contain any XML mappingsu201D
Solution:
1. Excel cannot save all or part of your workbook as XML Data if you have not created one or more mapped ranges.
2. If you haven't added an XML map to your workbook, or your data is not contained within an XML list, then you can save your workbook in the XML Spreadsheet file format.
If you have added an XML map to your workbook, follow these steps to map XML elements to your worksheet:
1. On the Data menu, point to XML, and then click XML Source to open the XML Source task pane.
2. To map one or more elements to your worksheet, select the elements in the XML Source task pane. To select nonadjacent elements, click one element, and then hold down CTRL and click each element.
3. Drag the selected elements to the worksheet location where you want them to appear.
I Hope this helps to find the path of solution with Ease.
Thanks...
Pratik

Reports output format

Hi all,
How to save a report output in "RTF" format in client system..
As I set the REPORT_DESFORMAT to 'RTF'
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESFORMAT,'RTF')
I'm unable to see the report in client machine as they appear in reports cache folder on server.
my server os is windows server 2008 and my client os is windows 7.
Thanks & Regards...

You cannot save a file directly to a client PC. After running the report you have to open the generated file in the browser (with web.show_document, plenty of examples in this forum) and the user can then save the document on his PC.

Forms sending report output horizantally in excel...

Hi....when I send my group above report output to exel it arranges each group horizantally. For example if there are two master groups 'A' & 'B' each of them having 500 child rows, then in excel fristly appears the Group 'A' with its 500 child records downwards. And group 'B' appears ahead of Group 'A' instead of down to Group 'A'. Is it not possible to arrange output in excel like that of oracle reports previewer???

Is there no one to answer this???

Need to download the report output list to a Excel file.

Hi,
I have a report output list, which i need to download to an Excel file, could any body suggest how to do this with out writing the ws_download.
My report data is coming from two internal tables, one internal table for left side reprt display and another internal table for right side report display, both the internal tables having the same fields.
suggest me how to combine these two internal table data in one internal table.
2 internal table structure is same but data is different.
Sunil

Hi,
in the o/p list use the below menu path.
LIST>SAVE/SEND>FILE,
then a pop-up window with different formates will appear,then choose u r required format.
Thanks,
Anji

Reports6i:hiding frame outlines in report output

i'am a newbie .
stuck up in creating the reports.
after i compile, in the report output ,i;am still able to see the frame outlines and repeating frame outlines,text oulines.data is fetched correctly.
pls suggest me wht to do, to avoid this
thx
pls help me

Go to Report Layout. Select the frame . There will be three buttons with color palettes on the left (Fill color, line color and text color). Click on the Line color (second one) and Press No Line Button. Now the frame lines will not appear on the output
Thanks
V Viswanathan

Junk report output

Hi,
I am using the following Reports version - 6.8.11.3 and running
on the client.The report output on Screen appears as junk
characters like Greek or Latin characters. Some times it
appears good.This problem occurs for the character mode reports.
Do we need to make any settings in registry to avoid this.
Thanks in Advance
Arthi

Hi
What is your database/application characterset? - AL32UTF8
NLS_LANG : AMERICAN_AMERICA.WE8ISO8859P1
concurrent request log file
-------------------+
XXTC Custom: Version : UNKNOWN
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XXTCM_SUPPLIER_SOA module: XXTC Supplier Statement
Current system time is 16-APR-2013 10:40:18
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_VENDOR_NUM_FROM='2'
P_VENDOR_NUM_TO='2'
P_INVOICE_DATE_TO='2013/04/16 00:00:00'
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
AMERICAN_MALAYSIA.AL32UTF8
Enter Password:
Report Builder: Release 10.1.2.3.0 - Production on Tue Apr 16 10:40:19 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Output file size:
446
------------- 1) PRINT   -------------
Printing output file.
Request ID : 607096
Number of copies : 0
Printer : noprint
Finished executing request completion options.
Concurrent request completed successfully
Current system time is 16-APR-2013 10:40:20
Thanks Sanjay
Edited by: 993525 on Apr 16, 2013 11:38 AM

Reports output screen

I am using Developer Server 6 and Application Server 4.0.7 on NT
SP5.
When I use browser to run my app and run reports from a form
using run_product with destype=screen or preview, the Windows
Save File dialog appears instead of report output on screen.
Can anybody help me about this problem?.
Ruy
null

Hi Vishnu,
Try setting your desformat parameter to 'html'. You may also want
to check the value of the FORMS60_REPFORMAT environment variable.
Ensure that the value for this environment variable is 'html'
rather than 'HTML'. After setting the FORMS60_REPFORMAT
environment variable, restart the forms listener. I experienced
the same problem that you describe, and the above fix worked for
me.
Regards,
Thomson Attasseril
Ruy Chicaco (guest) wrote:
: Hi Vishnu,
: I have configured desformat='HTML', destype=FILE and
: desname=File_Name.html.
: The report saves the File_name.html in the server directory
: c:\temp with extension html.
: The virtual directory corresponding c:\temp is /web_img/ and is
: configured in Listener ows:www virtual directory page.
: When I call this file with web.show_document or executing
: http://ows.rjo.oec.com.br:80/web_img/file_name.html, the Save
as
: dialog appears.
: Ruy Chicaco.
: Vishnu Vadla (guest) wrote:
: : Ruy Chicaco ,
: : the problem is confirm your browsers file type extension
: : setting, iwhether it is htm or html, accordingly use the
: : destype parameter. if the browser doesnot indentify the
: : extension then it ask to save the file, thus displaying the
: : dialog box
: : Vishnu V.
null

Diagnostic Reporter Output Format?

Hello; I've just begun working with the Diagnostic Reporter piece that comes with the StorEdge 3x00 software, and I've generated reports and notifications in both XML and non-XML format.
I have no XML experience; when I receive the report in XML format, and I attempt to open in IE, it displays the XML coding for the report. If I open it in Firefox, it also displays the coding, but includes an error at the bottom saying that there "appears to be no style sheet" available for this XML file.
If I use the non-XML format, the report comes in a jumbled plain-text format. Some sections are tidy enough to be read, others aren't.
I've gone through Sun support, and the group that I was directed to stated that no one on their team has any experience with the Diagnostic Reporter tool.
Does anyone have any tools or tips for how to read or reformat the Diagnostic Reporter output? Thanks!

Hi,
While defining Template you have defined the output format as pdf,so edit the template and output format Excel.
Thanks & Regards
Srikkanth

Controlling web report output

Hi, I would like to find out how to control the web report output generated by the server. Any help and ideas would be most welcomed.
I'm trying to get rid of the extra pair of <html> </html> tags generated by the report server. Below is an example of the html output generated by the server
<html>
<head>
<base href="http://server_name:port/reports/rwservlet/getfile/HW/YX+JyF1XNS6sQmfjO3063/39488071.htm">
</head>
</html>
<html>
<head>
</head>
</html>
What I want is
<html>
<head>
<base href="http://server_name:port/reports/rwservlet/getfile/HW/YX+JyF1XNS6sQmfjO3063/39488071.htm">
</head>
</html>
Apart from manually removing the tag myself, I can't find any documentation on how to do that. Is that even possible? I also notice that if I try to use paginated html reports builder, it doesn't give me the extra pair of <html> tags.
Thanks,
genie

Hi Genie,
Currentlty it is not possible. This is something that will be possible in one of the upcoming releases / patches of Oracle Reports.
However, this extra pair <html> tags will appear ONLY when you send the output directly to the browser, ie, when you use destype=cache in your command. If you send the output to a file, ie, destype=file, there will be no extra <html> tags. When you generate a file from Builder, it is equivalent to destype=file, that is why you do not see these tags in the output file.
The reason for having these extra <html> tags is: when you send the output to browser, the browser needs a BASE url, ie, a base path where the browser will look for any images etc. This BASE url is not part of the HTML output, but is written by Oracle Reports to tell the browser where the associated images etc are located.
Navneet.

Report Output appears diffrently

Similar Messages

Maybe you are looking for