Report Output Display Probem

Hi Gurus,
My Report output is having multiple pages,
Here my problem is, there is a large gap between each page,
how to reduce this gap?here sy-pagno is showing '1' even my
output is having multiple pages.please advice me.
Thanks & Regards,
Vijaya.

No Jay it is eating of my output,
First line of my program is as below
REPORT zxxxx NO STANDARD PAGE HEADING
                LINE-SIZE 170
                LINE-COUNT 65(1)
                MESSAGE-ID 00.
i am getting the exact width for my output with the above..
Thanks & Regards,
Vijaya.

Similar Messages

WBS element field to Depreciation Simulation Report output display

Hi SAP Experts,
We need to Add the WBS element field to Depreciation Simulation Report output display (S_ALR_87012936)
Could please give your valuable inputs
Thanks
Hari Pothula

HI Javed,
We have capitalized with WBS element but not displaying in simulation report.
All configurations done in in ACSET and activation Account assignment objects
Thanks
Hari

Bold font in report output display

Dear All,
Will any one let me know how to set BOLD font in the report output display?
Thanks,
Ranjan

<b>u cannot use this in 4.7</b>
REPORT ZFONT NO STANDARD PAGE HEADING LINE-SIZE 80 LINE-COUNT 65.
Start of print-control
NEW-PAGE PRINT ON.
PRINT-CONTROL FUNCTION 'SF000'.
WRITE: / 'This is CPI 20'.
SKIP.
PRINT-CONTROL FUNCTION 'SF020'.
WRITE: / 'This is CPI 6'.
SKIP.
PRINT-CONTROL FUNCTION 'SF008'.
WRITE: / 'This is CPI 12'.
Depending on your SAP printer device, this may also work
PRINT-CONTROL FONT 1 LPI 6.
you can try to change font and LPI numbers
WRITE: / 'font 1 lpi 6'.
PRINT-CONTROL FONT 2 LPI 6.
WRITE: / 'font 2 lpi 6'.
PRINT-CONTROL FONT 3 LPI 6.
WRITE: / 'font 3 lpi 6'.
End of print-control
NEW-PAGE PRINT OFF.
*--- End of Program

Problem In report output display when i run in the background

Hi,
In a classical report i am printing around 17 fields the width of the report out put is around 800 characters.
If i run the report in the fore ground it running perfectly. But the thing is when i give large selection is it GETTING ' TIMED OUT ' as it is running more than an Hour.
so i wanted to run it in the back ground to avoid TIME OUT problems.
But when i run in the backgroud i am not getting full out put in the SPOOL request(SIZE of the report output may causing the problem) .
Pls come up with some solutions
Thanks in advance

Try increasing the spool length..
Refer this link for doing so.
Spool List output display > 255 char when the rpt is run in Background
Thanks
mahesh

XML report output displays xml code instead of pdf

Hi,
My Release is R12.1.1, An xml report whose output is set as pdf. when running this report output is coming as xml code instead of pdf
another xml report ouput is coming in word instead of pdf
is there any additional settings required to display in pdf format
eventhough i configured pasta.csg & ixlib.cfg files
Thanks,
Alig
Edited by: user12257829 on Jun 2, 2010 11:41 PM
Edited by: user12257829 on Jun 2, 2010 11:41 PM

Hi,
Helios
Even i tried both MOS documents u have referenced, as both reports compeleting normally without any error
one thing i want to know can application use the same pasta.cfg file for pdf and text format
as i have a single pasta.cfg configured
Thanks
Alig
Edited by: user12257829 on Jun 3, 2010 1:18 AM
Edited by: user12257829 on Jun 3, 2010 1:18 AM

View output from report output,display with null row

Hi ,
I view report output through browser,but the output content include with a null row inside.

Hi
That doesn't possible, so don't worry
what U need to consider is zoption-tdprogram has to have the name of main program, so the program where the variable are defined.
This field isn't usually filled, because the main program is the driver program (i.e the program where the sapscript is called), it need to fill it only if the program where the variable are defined is not the driver program.
So i believe this (your) code:
REPORT z_sapscript.
DATA TEST_NAME(20) TYPE c.
CLEAR usr01.
SELECT SINGLE * FROM usr01 WHERE bname = sy-uname.
zoption-tddest    = usr01-spld.        "Output device (printer)
zoption-tdimmed   = 'X'.               "Print immediately
zoption-tddelete = 'X'.               "Delete after printing
test_name = sy-uname.
CALL FUNCTION 'OPEN_FORM'
     EXPORTING
         application        = 'TX'
         device             = 'PRINTER'
         dialog             = 'space
         form               = 'Z_TEST_SAPSCRIPT'
         language           = sy-langu
         OPTIONS            = zoption
     IMPORTING
          language           = sy-langu
       EXCEPTIONS
         OTHERS     = 1.
IF sy-subrc 0.
LEAVE PROGRAM.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
     EXPORTING
         window        = 'MAIN'
     EXCEPTIONS
          element       = 1.
CALL FUNCTION 'CLOSE_FORM'
EXCEPTIONS
    unopened = 1
    OTHERS   = 2.
It should work now
Max

Report output display problem

I developed purchase register for vendor wise when i am displaying out put it is taking 4 lines gap for each vendor.
my output is coming as below.
Afton chemicals 100020 01.2.2008
sector 6             10021   02.2.2008
Mumbai.
here it is taking 4 line space
indian additives 123456 09.02.2008
sector 20           124567 10.02.3008
newdelhi
here it is taking 4 lines space
abatap chemicals 456789 12.03.2008
deonar                  123456 13.03.2008
mumbai
again 4 lines space it is taking.
i have given line-count 10.
in my pogram i have used with in loops
reserved 8 lines and back statement.
how to reduce space between each vendor.
i written code as ..
report puchase order line-count 10.
loop at output.
onchange of output-name1.
reserved 8 lines.
write: output-date , output-amount.
back.
endon.
write: output-billno.

Hi,
the reason for your program behaviour is the combination of reserve 8 lines. and the back. statement You could either reduce the number of 8 lines, try to do without back or use a simple skip.
Rgds.
Roman Weise

Displaying selection screen details in Alv Report output display as Header

Hi all,
May be somebody knows how I can show selected values with select-options in top_of_page using REUSE_ALV_GRID_DISPLAY.
This shoud work for all the reports and diff selection screens .
I need one dynamic process which will for display any report selection screen selected details.(Basically varient information of report).
Small example if possible, please.
Thanks in advance,
Rimas

Hi Thiru,
Thanks for the input.
This is my exact requirement.
Hi Experts,
I would like to Display / Print Select-options selected details in ALV Header.
Ex: Say suppose here i enter kunnr as 1000
                                        lifnr as    2000 to 4000
                                        p_langu as 'EN'.
                                       p_dir as 'C:\TEMP,
                                       p_upda as 'X'
for selection screen below.
SELECTION-SCREEN :BEGIN OF BLOCK blk1 WITH FRAME TITLE text-000.
SELECT-OPTIONS : s_kunnr FOR kna1-kunnr.
SELECT-OPTIONS : s_lifnr FOR lfa1-lifnr.
PARAMETER      : p_lanuge LIKE t002-spras DEFAULT sy-langu.
PARAMETER: p_dir LIKE rlgrap-filename
           DEFAULT text-003 LOWER CASE.
PARAMETERS: p_upd AS CHECKBOX DEFAULT 'X'.
I dont want to Hard code selection screen values like
DATA: header TYPE slis_t_listheader,
wa TYPE slis_listheader,
wa-typ = 'S'(093).
wa-key = s_lifnr .
wa-info = 'Vendor no".
APPEND wa TO header.
I want dynamic process for all of my selection screen values selected
hard code may be it will be fine small selection screen it will work.
Fur that i got one process to get dynamically through fm
Ex: DATA: irsparams TYPE rsparams OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
EXPORTING
curr_report = program
TABLES
selection_table = irsparams
EXCEPTIONS
not_found = 1
no_report = 2
OTHERS = 3.
loop at irsparams.
write : / irsparams-SELNAME.
write : / irsparams-SIGN.
write : / irsparams-OPTION.
write : / irsparams-LOW.
write : / irsparams-HIGH.
endloop.
I have done my requirement partially but i am failed to achive my full requirement.
Because
rsparams strcture is diff from slis_t_listheader.
Can any one help me for further assistence to display irsparams strcture data in alv header.
Thanks
Nag

Report output displaying all rows in a single line

Sometimes
Edited by: 845142 on Mar 17, 2011 11:12 AM

Hi,
There might be some mistake in your layout. the print direction should be down.
Look at the below link for more information:
http://oracleapps4u.blogspot.com/2011/03/layout-mode-print-direction.html
Some guide lines in developing the report layout:
http://oracleapps4u.blogspot.com/2011/03/layout-guidelines-to-increase-report.html
If this didnt help you. detail more about your problem

Report output displaying displaying as *

Hi Experts,
I searhed all the thread could'nt get a solution ,While displaying the data in BEX, it is displaying as '*' for keyfigures. Though the data is available. I transported this quey from quality to production every thing fine quality system no issues but this problem in production system only i Tried NODIM option issue not solve . In ouput level bex analzer right click k in formula option data displaying but this locally only is displaying i want to this in query designer level .Can any one suggets me on this issue.
Regards.
Rk

You either have a mix of units, currencies or currency types in your columns. It is probably true that you didn't have the same volume/valid data in the Q system versus the P system. You probably don't have any of these as options for filters in your query so to check this go into the Infoprovider for this query and check, using the ListCube tcode, to see what types of data you actually have in the infoprovider. You will probably see that there is a mix of data based on the units or currencies.

Printing issue of report output list display

Dear All,
I need to print the report output display list. So, for this I have used the following code. But it's not printing.
Will you please check the below code and kindly let me where should I change/modify in the code.
START-OF-SELECTION.
SET PF-STATUS 'ZGUI_STATUS1'.
END-OF-SELECTION.
AT USER-COMMAND.
CASE sy-ucomm.
    WHEN 'PRNT'.
     DATA: l_params TYPE pri_params,
           l_valid TYPE c,
           l_arc_params TYPE arc_params.
     CALL FUNCTION 'GET_PRINT_PARAMETERS'
       EXPORTING
         destination            = l_v_usr01-spld
         copies                 = 1
         list_name              = 'TEST'
         list_text              = 'Test NEW-PAGE PRINT ON'
         immediately            = 'X'
         line_size              = 220
         release                = 'X'
         mode                   = 'CURRENT'
         no_dialog              = 'X'
       IMPORTING
         out_archive_parameters = l_arc_params
         out_parameters         = l_params
         valid                  = l_valid
       EXCEPTIONS
         archive_info_not_found = 1
         invalid_print_params   = 2
         invalid_archive_params = 3
         OTHERS                 = 4.
NEW-PAGE PRINT ON PARAMETERS l_params ARCHIVE PARAMETERS
                          l_arc_params NO DIALOG.
      PERFORM display_data.
      NEW-PAGE PRINT OFF.
ENDCASE.
Many Thanks,
Ranjan

Dear Amit,
The font size is not increasing, in-fact, if I use the code like the below, it's not even printing, I am checking different ways,
DATA: lay   TYPE pri_params-paart,
      lines TYPE pri_params-linct,
      rows TYPE pri_params-linsz.
AT USER-COMMAND.
CASE sy-ucomm.
    WHEN 'PRNT'.
      lay = 'X_60_85'.
      lines = 60.
      rows = 85.
      DATA: l_params TYPE pri_params,
            l_valid TYPE c,
            l_arc_params TYPE arc_params.
      CALL FUNCTION 'GET_PRINT_PARAMETERS'
        EXPORTING
         destination            = l_v_usr01-spld
          destination            = 'LPIN'
          copies                 = 1
          list_name              = 'TEST'
          list_text              = 'Test NEW-PAGE PRINT ON'
          immediately            = 'X'
          layout                 = lay
          line_count             = lines
          line_size              = rows
         line_size              = 220
          release                = 'X'
          mode                   = 'CURRENT'
          no_dialog              = 'X'
        IMPORTING
         out_archive_parameters = l_arc_params
          out_parameters         = l_params
          valid                  = l_valid
        EXCEPTIONS
          archive_info_not_found = 1
          invalid_print_params   = 2
          invalid_archive_params = 3
          OTHERS                 = 4.
      NEW-PAGE PRINT ON   PARAMETERS l_params NO DIALOG.
      PERFORM display_data.
      NEW-PAGE PRINT OFF.
ENDCASE.
Kindly let me know if you have some new answer?
Kind Regards,
Ranjan

How can we format the download file as it is as report output.

hi all,
I have a issue, when i execute the program the the report output displays on output screen.
now, in menu when i down load this output data into a word file the format is not correct i.e. it is not as it is in report output screen.
how we can correct this output format, when we download in word format file through menu.
pls help me on this .its very urgent.
thanks!
vipin

Vipin,
U will have to use OLE methods to format your MS-WORD output.
Check the tcode DWDM for sample code
Also check out the threads:
Get WORD Options with OLE
Re: OLE and MS Word
Also search in code samples with OLE-MSWORD
Reward if helpful,
Karthik

Alignment issue in Report Print display

Dear All,
I need to print the Japanese text from the report output display. PResently I am trying but I am facing problems with line alignements, they are not printing properly in the paper. Please advice me.
Thanks
Ranjan

Hi Ranjan,
Try to find a japanese font type that use the same 'character space' for all the characters, as the COURIER font does. If you check for example the COURIER uses the same number of pixels for 'l' and 'm', and TIMES doesn´t. That is what I mean.
Hope this helps,
Gabriel P.

Is it possible to create editable columns in report output?

Hi guys,
I want to create a column in report output displayed using Write statement as editable such that User can change the value at the output after display.
Let me know the possible solutions.
Thanks,
GURU

hi,
use this statment
WRITE: num1 INPUT
After entering or changing the value
MODIFY LINE 1 FIELD VALUE num1 FROM num1
this Line 1 may differ according to ur prigram
Reward points if helpful
Regards,
priya

Displaying selection criteria in ALV report output

Hello,
Ive been using REUSE_ALV_GRID_DISPLAY function module to display my report content in ALV.
My reports selection criteria has parameters, select options, checkboxes and radio buttons. As part of the ALV output, I want to display the criteria that the user had selected in the selection screen. I was hoping to do that via parameter "i_callback_top_of_page" and fill the selection criteria in the header area. I'm using REUSE_ALV_COMMENTARY_WRITE to fill the header area.
However, the header area takes too much of view space in the output if I put all the selection screen information in it.
Is there a way to make the header area scrollable? What is a good way of displaying the selection criteria information as part of the report output?
Appreciate your help.
ss

Hi SS,
1. The purpose of displaying / writring
   selection information
   in alv is
   for identifying what the user has seleccted,
   directly from the report (when its printed)
2. So, the option of priting/writing
   it on the TOP of alv, is ok.
3. However, U can also choose to WRITE
it at the BOTTOM (instead of top)
4. Try to utilise maximum spacing (horizontally)
   field1 : abcd      fidl2 = xyz field3 = ppp
   field4 : mnc       etc.         etc.
regards,
amit m.

Report Output Display Probem

Similar Messages

Maybe you are looking for