Report output not using full page.

I have a report that does not use the full screen to display.  The output display on about a 1.5 to 2 inch section of the page and the rest is white space.  How do I get it to use the full page?

Hi Raymist123,
If I understand correctly, the issue which you occurred is that the report content only displayed about 1.5 to 2 inch. As per my understanding, I think this issue is caused by the report content including all the report items (table, matrix, list, chart,
gauge, text boxes etc.) is only occupied 1.5 to 2 inch on the report design surface. If in this case, we can try to expand the sizes of all the report items to fix the issue. And please make sure that the PageSize of the report have set to 8.5 x 11.
If this issue is still existed, could you please post the screenshot about the design surface and the all the size properties? Then we can make further analysis.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

  • How can I print just a part of the page and not the full page with Adobe Reader v 10.1.2?

    how can I print just a part of the page and not the full page with Adobe Reader v 10.1.2? I need to print a engineering print with lot of information but information is too small in letter size and I don't have a plotter.

    Two ways to print a portion of a page: zooming or using the Snapshot Tool.
    ZOOMING:
    Zoom into the area you want to print.
    Click the Print icon.
    Under "Pages to Print", make sure "Current view" is selected under "More options" (you may need to click "More options" to open it).
    If you aren't satisfied with the preview, try clicking "Fit" under the Size button.
    SNAPSHOT
    Choose Edit > Take A Snapshot.
    Drag a rectangle around the area you want to print. 
    Click the Print icon.
    Under "Pages to Print", make sure that "Selected Graphic" is selected under "More options".
    To enlarge the snapshot to fit the sheet of paper, choose "Fit" under the Size button.
    Hope this helps!

  • On myspace home page and inbox page it will not show full page it is in the center,hard to read

    MY MYSPACE HOME PAGE AND INBOX PAGE IS NOT SHOWING FULL PAGE...ALL GONE TO THE CENTER
    == URL of affected sites ==
    http:// www.myspace.com/orangebyrd

    I did control and 0 and it worked,,thanks,thanks,thanks... (first time I did it wrong I hit ctr 1 and 0...)...Oh I am so glad I have it fixed ,cannot thank you enough..........Jean
    WOW, I am so thrilled to get it back to normal...whoever helped me God Bless You...

  • Firefox is not loading full page it is stopping in between by showing done

    i am .net/html developer,i am getting strangeproblem .. firefox is not loading full pages of my websites it is stopping in between by showing a blank page and displaying done at the bottom when i inspect thru the firefox in the console i can see few responses of ajax calls not all what could be the problem.
    this problem is occuring for shtml page in which i am calling ajax calls .
    thanks in advance
    vamshi

    Please see the screen shot of partially loaded page

  • XML Publisher report output in RTF format does not display full page

    Hi,
    We have one XML Publisher report, the output of report in RTF format is not getting displayed in Full Page in normal way (MS Word -->View menu --> Print layout) but we can see full page display when we do MS Word -->View menu --> Outline.
    Appreciate your valuable inputs on this.
    Is this a template issue or any profiles needs to be set.
    Thanks
    Vijay

    Do you have any header and footer on your template?
    If you have any header and footer then try to adjust it as of to display full page.
    Thanks
    Yasar

  • Report cannot print in full page

    Hi all,
    I have generated the report and when view on screen, the format is ok but when submitted to printer, the report output does not show in full page, right hand side of the paper is blank off.
    I am using report v.6.0.8.25.0
    Rgds
    Lim

    Hi,
    Under Report Builder directory you will find one directory which contains printers file with extensions of PRT, check the setting their.
    Thanks
    Shishu Paul

  • How to get report output in center of page

    hi
    i made one report.
    output is coming properly but its coming on left side of the page i want it should come on center of the page .
    so please help me .
    thanks in advanced.

    i am not enough sure what  you want but you can use justification
    write : / var centered."left-justified or right-justified .
    or you have to format like
    write : /pos(len) Var.
    i.e like
    write : /5(10) var.
    regards
    shiba dutta

  • Report output not coming correctly

    Hi All,
    my query is like
    select 'gggohpoopiokoljmkjjg@@@@@' record from dual;
    where record string's length is more than 2000 characters.
    I am using oracle report for this purpose as i have some other validations associated with it.
    i am printing the report output in a flat file.i want ALL THE OUTPUT SHOULD COME IN ONE LINE.
    but this is not happenning so...for the string lengths more than 1000 it's coming in diff line.
    How can i make sure that my output file WILL BE IN SINGLE LINE.
    i tried in unix vi editor i can give 3000 charecters but it doesn't go to the second line.
    any help on this issue will be helpful
    thanks in advance

    If there's no easy way to do it, you may use a "special character", like chr(xx), as your long line delimiter to chop a line into a couple of lines. Then you write a very simple C program to post-process the report output file to remove these "special character".
    If all characters are possible in your report file, you may use a string as the delimiter.

  • RH 10: not use Master Page in Printed Docs

    I have a Master Page set up with a company logo and horizontal rules, which works great with the help topics. The problem occurs when I generate printed docs from the source files.
    Everything else works well enough to get by (I have some tweaking to do), BUT every single topic shows up with the rules and the company logo. I don't see anywhere to NOT apply the Master Page to the printed output. Is there a secret to not using the online help layout in the printed docs?
    thanks,
    Alia

    Master page headers and footers 100% guaranteed do not survive the trip to printed documentation. My guess is that in the master page your "headers" and "footers" have been created in the body section of the master page.
    Create a new topic attaching that master page in the process. Then unlink the master page from that topic. Do you still see the header and footer? If you do, my theory is proved. If you do not, post back.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Some Crystal Reports are not using the Cache Server

    Hi...we are currently running BOE XI R2 SP2.  I setup a server group with a Cache Server and a Page Server.  In the CMC, I set this cache server to keep reports cached for 15 minutes.  On the Process tab of some reports, I specifically set the report to use this new server group.  On some of the reports this works as expected.  For others, it does not appear to be since the cache folder's Date Modified date does not change.  So far the only similarity between the reports that do not use cache is that these reports have sub-reports.  Has anyone experienced this before?  If so, how did you resolve it? 
    Thanks!

    Hi Rich,
    the connectivity on the Designer an don the BusinessObjects system is identical. Is region the only characteristic being used in the report ? which connectivity did you use in Crystal Reports ?
    ingo

  • Time Capsule Not Using Full Capacity

    Good morning. I have a 1tb Time Capsule and use Time Machine to backup my iMac and my son's MBP.
    The Time Machine backup is reporting that 235gb of 998gb is available. But it's been "stuck" at about 235gb for weeks. It seems as if the system is not using all available capacity. Is this normal?
    I should note that at one time I had miscellaneous folders and files on the Time Capsule (from a PC). Would those miscellaneous files have somehow "blocked" access to the rest of the free space? I have removed those misc files, but still not seeing the system use my full drive capacity.
    Any ideas how to get the system to use the rest of the drive?
    Thanks in advance, John

    The Time Capsule is reporting on the space that backups are using on the drive. Backups are stored in a special container called a sparsebundle file.
    Sparsebundles behave differently than normal files. The sparsefundle expands as more data is added.But, it behaves differently when files are deleted.
    So, lets say that the sparsebundle is up to 100 GB.  Now, you delete 10 GB from your backups beasue you don't need the files any longer. So, you think you should see 90 GB now.
    The sparsebundlw will still show as a 100 GB. It will begin to "grow" again when more than 100 GB is present.

  • Do not get full page when click on bookmarked entry

    when click on bookmarked item - only get part of a page not full page? Why? how do I get the full page from clicking on a bookmark?
    using firefox 4 on win 7 - 64bit
    last (old) firefox worked fine!!!

    How are you saving a new bookmark?
    There 5 ways to save a new Bookmark in Firefox, the first 4 should offer to save the new bookmark in a folder:
    1.
    2. Right-click and select Bookmark this Page.
    3. Bookmarks > Bookmark this Page
    4. Double-click the Star that is on the right side of the Location bar.
    4a. (A single-click on the Star will save the new Bookmark to the Unsorted Bookmarks folder, without opening the Edit this Bookmark dialog.)
    5. Drag the website image in the URL bar into the Sidebar view of Bookmarks
    or to the Bookmarks menu bar item and then into the drop-down or onto the Bookmarks Toolbar

  • 6830 Not Printing Full Page

    Installed my new printer this morning using a wireless network.  Finally got that to work after 2 hours, but now it does not print a full page from Word, Excel, or web (only applications I tried).  It cancels the print about half-way down the page. Thanks.

    Update After getting NO help from HP and on this forum and being unable to scan or print a document on this piece of crap for a month.
    It has given me great pleasure to smash the printer into pieces the sound of breaking glass was music to my ears ( we have recently moved house and the receipt is lost so no refund available from the 5 month old printer.  
    Over the last 3 years I have bought a HP desktop / Ext hard drive/ 2 laptops and this printer only the ext hard drive had not required a repair.  the two laptops both has factory faults thankfully under European law I was given a full refund  the desktop failed requiring a return and free repair and now this.... I am not a violent man but we all know to get anything repaired when its not your fault is a nightmare of paperwork taking up to 6 months. 
    A hammer is SO MUCH MORE EFFICIENT.
    I declare I will NEVER buy HP ever again!

  • SSRS 2008 R2 report does not print the page header for a html content displaying on multiple pages

    Hi
    I need to display the html content from the database. The html content are quite long and can have content of 3-5 pages. Issue I  am facing is f the record has html content of 3-5 pages, then it does not print the page header (which is a separate tablix) on
    second page onwards.
    Nikesh Shah
    Nikesh Shah

    Hi Nikesh,
    According to your description, I’m not sure the meaning of Page header in your scenario. In Reporting Services, a page header that run along the top of each page, respectively. Headers can contain static text, images, lines, rectangles, borders, background
    color, background images, and expressions. But we couldn’t add tablix in the page header.
    If you are saying report header, a report header consists of the report items that are placed at the top of the report body on the report design surface. They appear only once as the first content in the report. So it cannot repeat in other pages.
    If you are saying tablix header, freezing column headers are different in table and matrix. For more details, please refer to the following thread:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/c8ddc1af-1bdf-4e72-8aab-0353c7cc848a/ssrs-report-freezing-row-and-column-while-scrolling-issue?forum=sqlreportingservices
    If there are any misunderstanding, please elaborate the issue for further investigation.
    Regards,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Video out not using full widescreen on a 23.5" monitor

    I have an Asus 23.5" LCD which I use for TV and my Xbox. Both use the widescreen how it should. But when I plug my Macbook into it, I get 2" bars on the left and right. However, if I uncheck "mirror display," my desktop background fills the entire screen. I mean, the second desktop, or the extended desktop uses the full widescreen format.

    Hi and welcome to Discussions,
    in 'Mirror Mode' both the internal and the external display use the same resolution, which with the MacBook is 1280 x 800.
    Only in 'Extended Mode' the internal and the external can use different resolutions.
    You might wanna check if the Asus LCD has an option to 'remove' the black borders, when using a resolution that is not the native (full) resolution of it.
    If this is possible, you might experience however a less sharper image on the Asus since it is not using its native resolution.
    Regards
    Stefan

Maybe you are looking for

  • Justification for using HashMap and not ArrayList

    Hi, I've recently completed a project for my course and now I'm doing the write up for it. Part of my project was to load a dictionary into a data structure. I went with a HashMap because I had code from a previous project to help implement it, the d

  • Why my ipod can not be detected in wimdows 8.1

    I received this message when I connect my ipod to my computer.....An ipod has been detected but it could not be identified. Please disconnect and reconnect the ipod. I have uninstalled itunes-reinstalled and tried other advice from apple website, but

  • How do I restore default US keyboard layout?

    I am running Tiger on a PPC. I recently chose Spanish to do some writing. I am unable to return my keyboard to the default US English layout even though it is now the only language chosen. Have followed directions for choosing language in system pref

  • Why does iMessage open when I"m chatting in google?

    Why does the login to iMessage window open up when I'm chatting through gmail?

  • ARE3 doc. no. is same as Internal No. doc.

    Dear All, Issue is regarding the No. ranges for ARE3. As When I create ARE3 Document, the no. range saved is same as Internal No. document. However I have assigned different no. ranges for both Internal Doc. no & ARE3 in SNRO. But still the same no.