Report Output to mail
Hi all.
Could you pls let me know how to send the alv report output to mail. Thanks in advance.
Cheers,.
sami.
hi,
try this..
GOTO SE80 -> write the Package name :- SBCOMS
in this package you find lot of ways to send mail.
hope this helps
Regards
RItesh J
Similar Messages
-
Sedn report output to mail in d2k 10g
Hi
i want to send report output to mail .
i set
DESTYPE = mail
DESNAME = i gave mail id in initial values
I put the rdf in server and ran cucurent request from application but i am not getting the mail
any one help me tell what other steps i have to do
Regardshi,
try this..
GOTO SE80 -> write the Package name :- SBCOMS
in this package you find lot of ways to send mail.
hope this helps
Regards
RItesh J -
Very urjent how to send report output in mail
hi experts,
how to send report output in mail which function module should i use wht parameters should i pass.
thanks in addavnce,
points to be awarded.CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
destination = '026c'
copies = count
list_name = 'VATS_ASBUILT'
list_text = v_list
immediately = 'X'
release = 'X'
new_list_id = 'X'
expiration = days
line_size = 132
line_count = 65
layout = 'X_65_132'
* sap_cover_page = 'X'
* cover_page = 'X'
receiver = 'SAP*'
department = 'VATS'
no_dialog = 'X'
IMPORTING
out_parameters = params
valid = valid.
SUBMIT zppr_vats_asbuilt WITH p_aufnr EQ v_aufnr
TO SAP-SPOOL WITHOUT SPOOL DYNPRO
SPOOL PARAMETERS params
AND RETURN.
SELECT SINGLE rqident FROM tsp01 INTO l_spoolno
WHERE rqtitle = v_list .
* convert report to PDF format
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = l_spoolno
no_dialog = 'X'
TABLES
pdf = l_ipdf
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
EXIT .
ENDIF.
Now comes the part to send the mail
try.
* -------- create persistent send request ------------------------
send_request = cl_bcs=>create_persistent( ).
clear document.
* -------- create and set document with attachment ---------------
* create document from internal table with text
document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = text
i_length = '12'
i_subject = '' ).
*changing the content of the attachment
binary_content[] = l_iobjbin[].
*change the name of the PDF attachment
concatenate 'Build ID' s_buildid_i 'Rev' v_buildid_rev
into i_att_sub separated by space.
* add attachment to document
call method document->add_attachment
exporting
i_attachment_type = 'PDF'
i_attachment_subject = i_att_sub
i_att_content_hex = binary_content.
*setting the option to send an e-mail more than 50 characters
call method send_request->set_message_subject
exporting
ip_subject = t_sub.
* add document to send request
call method send_request->set_document
exporting
i_document = document.
* --------- set sender -------------------------------------------
* note: this is necessary only if you want to set the sender
* different from actual user (SY-UNAME). Otherwise sender is
* set automatically with actual user.
sender = cl_sapuser_bcs=>create( 'VATSUPPORT' ).
call method send_request->set_sender
exporting
i_sender = sender.
*Send the list based on receivers list obtained
loop at l_ireclist.
AD_SMTPADR = l_ireclist-receiver.
* --------- add recipient (e-mail address) -----------------------
* create recipient - please replace e-mail address !!!
recipient = cl_cam_address_bcs=>create_internet_address(
AD_SMTPADR ).
* add recipient with its respective attributes to send request
call method send_request->add_recipient
exporting
i_recipient = recipient
i_express = 'X'.
ENDLOOP.
call method send_request->set_status_attributes
exporting
i_requested_status = 'E'
i_status_mail = 'E'.
* To send the mail immediately
call method send_request->set_send_immediately( 'X' ).
* ---------- send document ---------------------------------------
call method send_request->send( ).
commit work. -
How to send ALV report Output through mail in background !
Hi ,
I had an ALV Report. I want to send this report output to patricular email id every day ! Presenty i do this manually. I run the report and send the output to the particular email address. Now i want to schecule the report daily in background and the out put of the report should be mailed to particular email ids in background itself. How can i do this ?
Is there and method or setting through which we can do this ?
RegardsHi Nau,
For this requirement you will have to write another program.
This program will convert the spool requests into PDF document and sends an email to the recipients that you specify.
These are the threads which are already posted in The SDN.
*http://wiki.sdn.sap.com/wiki/display/Snippets/Converts+spool+request+into+PDF+document+and+emails*
*<a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="353650"></a>*
*<a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="902985"></a>*
You need to use the Function module :
-- Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
I will provide you with the code to get this functionality.
*& Form SEND_EMAIL
form SEND_EMAIL .
DATA: t_mailpack TYPE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_mailhead TYPE solisti1 OCCURS 0 WITH HEADER LINE,
t_mailbin TYPE solisti1 OCCURS 0 WITH HEADER LINE,
t_mailtxt TYPE solisti1 OCCURS 0 WITH HEADER LINE,
t_mailrec TYPE somlreci1 OCCURS 0 WITH HEADER LINE.
DATA: wa_maildata TYPE sodocchgi1,
l_filename(50) TYPE c,
l_fldname(30) TYPE c,
l_fldval(100) TYPE c,
l_lines TYPE i,
l_text TYPE text128 .
DATA: w_email_subrc TYPE i.
DATA: w_ship like vbfa-vbeln.
CLEAR: wa_maildata,
t_mailtxt,
t_mailbin,
t_mailpack,
t_mailhead,
t_mailrec.
REFRESH: t_mailtxt,
t_mailbin,
t_mailpack,
t_mailhead,
t_mailrec.
*-- Fill output file
*- Fill header
CLEAR: t_mailbin.
* t_mailbin[] = pdf_tab[].
t_mailbin[] = it_att[]. "Uthaman
*This line is added to get the shipment no in Subject Line
SELECT SINGLE * FROM vbfa WHERE vbelv EQ nast-objky
AND vbtyp_v EQ c_vbtyp_v_j
AND vbtyp_n EQ c_vbtyp_n_8.
w_ship = vbfa-vbeln.
shift w_ship left deleting leading '0'.
*-- File name
if nast-kschl EQ 'ZFPL'.
CLEAR l_filename.
CONCATENATE 'Packing List -'
sy-datum+4(2) sy-datum+6(2) sy-datum(4) '.PDF' INTO l_filename.
*-- Creation of the document to be sent File Name
wa_maildata-obj_name = 'Packing List'.
*-- Mail Subject
CONCATENATE l_filename '-' 'Shipment No -' w_ship INTO wa_maildata-obj_descr SEPARATED BY space.
*-- Mail Contents
t_mailtxt-line = 'Packing List'.
APPEND t_mailtxt.
ENDIF.
if nast-kschl EQ 'ZFBA'.
CLEAR l_filename.
CONCATENATE 'Booking Advice -'
sy-datum+4(2) sy-datum+6(2) sy-datum(4) '.PDF'
INTO l_filename.
*-- Creation of the document to be sent File Name
wa_maildata-obj_name = 'Booking Advice'.
*-- Mail Subject
CONCATENATE l_filename '-' 'Shipment No -' w_ship INTO wa_maildata-obj_descr SEPARATED BY space.
*-- Mail Contents
t_mailtxt-line = 'Packing List'.
APPEND t_mailtxt.
ENDIF.
*-- Prepare Packing List
*-- Write Packing List (Main Subject)
CLEAR: l_lines, t_mailpack.
DESCRIBE TABLE t_mailtxt LINES l_lines.
* READ TABLE t_mailtxt INDEX l_lines.
t_mailpack-doc_size = ( l_lines - 1 ) * 255 + STRLEN( t_mailtxt ).
* CLEAR t_mailpack-transf_bin.
t_mailpack-transf_bin = ' '.
t_mailpack-head_start = 1.
t_mailpack-head_num = 0.
t_mailpack-body_start = 1.
t_mailpack-body_num = l_lines.
t_mailpack-doc_type = 'RAW'.
APPEND t_mailpack.
t_mailhead = l_filename.
APPEND t_mailhead.
*-- Write Packing List (Attachment)
CLEAR: l_lines, t_mailpack.
DESCRIBE TABLE pdf_tab[] LINES l_lines.
* READ TABLE pdf_tab INDEX l_lines.
t_mailpack-doc_size = ( l_lines - 1 ) * 255 + STRLEN( t_mailbin ).
t_mailpack-transf_bin = 'X'.
t_mailpack-head_start = 1.
t_mailpack-head_num = 1.
t_mailpack-body_start = 1.
t_mailpack-body_num = l_lines.
t_mailpack-doc_type = 'PDF'.
t_mailpack-obj_name = l_filename.
t_mailpack-obj_descr = l_filename.
t_mailpack-obj_langu = 'E'.
APPEND t_mailpack.
*-- Set recipients
tables : ztotcemail.
SELECT SINGLE * FROM vbfa WHERE vbelv EQ nast-objky
AND vbtyp_v EQ c_vbtyp_v_j
AND vbtyp_n EQ c_vbtyp_n_8.
CLEAR vttk.
SELECT SINGLE * FROM vttk WHERE tknum EQ vbfa-vbeln.
SELECT SINGLE * FROM ztotcemail WHERE tplst = vttk-tplst
AND lifnr = vttk-tdlnr.
IF SY-SUBRC EQ 0.
t_mailrec-receiver = ztotcemail-smtp_addr. "'Here you will give the email address'.
t_mailrec-rec_type = 'U'.
APPEND t_mailrec.
ENDIF.
**-- Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_maildata
put_in_outbox = 'X'
* commit_work = 'X' " N-16
TABLES
packing_list = t_mailpack
object_header = t_mailhead
contents_bin = t_mailbin[]
contents_txt = t_mailtxt[]
receivers = t_mailrec
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
OTHERS = 99.
w_email_subrc = sy-subrc.
IF sy-subrc EQ 0.
MESSAGE s000(zotc) WITH 'Email output sent successfully'.
ELSE.
MESSAGE s000(zotc) WITH 'Can not send email output'.
ENDIF.
endform. " SEND_EMAIL
Hope the above information will be helpful.
Regards,
Kittu -
How to send the ALV report output in mail
Dear all,
I have developed an ALV report.I need to send this output in the mail.Can anyone help me with the sample code of how to do this.Hi Ramya,
Check the links below :
http://wiki.sdn.sap.com/wiki/display/Snippets/Sending+Mail
http://wiki.sdn.sap.com/wiki/display/Snippets/AbapEMAILProgram
http://wiki.sdn.sap.com/wiki/display/ABAP/SendMessagetoExternalemailidandSAPUseridvia+ABAP
They will explain you to send an email.
Regards,
Kittu -
Dear Oracle gurus,
when i choose to send oracle report in mail format it generates an .eps file.
kindly help me how to open this file.
thanksThis is a common question in this forum or in the oracle community. Try searching first and save your time.
I do search one for you How to send Oracle report automatically in form... | Oracle Community
Hamid -
Excel problem while sending report output as mail!!
Hi,
I am sending an excel file as attachment in the mail id provided on the selection screen but once we open the attachment the first column value is not displayed in excel , but if we click on the excel cell twice , it does display the content otherwise it's seen as blank ..what may be the reason?
I am using FM SO_DOCUMENT_SEND_API1 for sending mail...
Points for sure .....
Regards
GunjanHello,
DO like this:
CONSTANTS: CON_CRET TYPE X VALUE '0D', "OK for non Unicode
CON_TAB TYPE X VALUE '09'. "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
*constants:
* con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
* con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
INTO IT_ATTACH SEPARATED BY CON_TAB.
CONCATENATE CON_CRET IT_ATTACH INTO IT_ATTACH.
APPEND IT_ATTACH.
LOOP AT IT_EKPO INTO WA_CHAREKPO.
CONCATENATE WA_CHAREKPO-EBELN WA_CHAREKPO-EBELP
WA_CHAREKPO-AEDAT WA_CHAREKPO-MATNR
INTO IT_ATTACH SEPARATED BY CON_TAB. " Check here
CONCATENATE CON_CRET IT_ATTACH INTO IT_ATTACH. " Check here
APPEND IT_ATTACH.
ENDLOOP.
VAsanth -
How to send report output from SUBMIT statement
Hi,
I need to develop one report whcih can be use to send any report output in mail as attachment in txt of execl format. So i will be using SUBMIT statement to execute the report in my new report and i need to convert the reportout in txt or excel format and need to send as attachment in mail. This new report can be use to execute any report which may have ALV GRid, Normal outout screen. So what could be the best way to develop this kind of report.
Br,
Piyush>
piyush mathur wrote:
> Hi Suhas,
>
> LIST_TO_ASCI will give me data in lines. and its difficult to separate the columns in another internal table for attachment file. As this report is going to use to send any report output so i can not fixed the delimiter. So i am looking some function which can split the data in columns when I am reading from List.
> Br,
> Piyush
No need to seperate nothing additionally, this will come automatically in the attached file. Draft below
DATA list_tab TYPE TABLE OF abaplist.
SUBMIT your_report EXPORTING LIST TO MEMORY
AND RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = list_tab
EXCEPTIONS
not_found = 1
OTHERS = 2.
DATA string_tab TYPE list_string_table.
"use table type appropriate for attchement
DATA ascii_tab TYPE soli_tab.
CALL FUNCTION 'LIST_TO_ASCI'
TABLES
listasci = ascii_tab
listobject = list_tab.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = 'C:\test.txt'
filetype = 'ASC'
TABLES
data_tab = ascii_tab.
DATA go_email_doc TYPE REF TO cl_document_bcs.
go_email_doc = cl_document_bcs=>create_document(
i_type = 'TXT'
go_email_doc->add_attachment( i_attachment_type = 'TXT'
i_attachment_subject = 'My Attachment'
i_att_content_text = ascii_tab ).
Regards
Marcin -
Sending report output via E-mail (excel pivoted format)
Hi all,
i have a written a report where i need to send the report output to somebody via
E-mail.i am sending this report output via E-mail successfully.The receiver receives, my output in excel format.but this excel is not <b>pivoted</b>.
i want , the receiver should get my output in pivoted excel format.i.e my output data should be exactly fit in the excel sheet.
now the columns in excel sheet are overlapping.once i double clicked, the columns are getting separated.i do not want to double click.i want all the columns should come properly i.e excel field length should be adjusted as per the output field length.
i am giving my coding below.plz suggest how i can do the above thing .it's urgent.
any idea will be highly appreaciated.
Regards
if not p_email1 is initial.
perform fill_report_csv.
perform f_send_internet_mail.
endif.
FORM fill_report_csv.
data : l_text(232) type c,
v_matnr1(21) type c,
v_matnr(21) type c,
v_matkl(14) type c,
v_maktx(45) type c,
v_ttlstk(14) type c,
v_verpr(14) type c,
v_werks(14) type c,
v_lgort(14) type c,
v_char(10) type c,
v_stks type p ,
v_po(40) type c,
v_qty(13) type c,
v_qty1 type sy-datum,
v_date(15) type c,
v_date1(15) TYPE C,
v_name(35) type c,
v_eknam(18) type c,
v_lifnr(15) type c,
l_po(40) type c,
v_matnr(20) type c,
l_rate(11) type p decimals 5,
l_flag type c.
concatenate c_equal c_colon 'PO no.' c_colon
into v_po.
concatenate c_equal c_colon 'Material no.' c_colon
into v_matnr.
concatenate c_equal c_colon 'Description.' c_colon
into v_maktx.
concatenate c_equal c_colon 'Due Qty.' c_colon
into v_qty.
concatenate c_equal c_colon 'Del Date.' c_colon
into v_date.
concatenate c_equal c_colon 'Vendor.' c_colon
into v_name.
concatenate c_equal c_colon 'Buyer.' c_colon
into v_eknam.
concatenate c_equal c_colon 'Vendor Code.' c_colon
into v_lifnr.
concatenate
v_po v_matnr v_maktx v_qty
v_date v_name v_eknam v_lifnr
into i_download
SEPARATED BY con_tab.
append i_download .
clear : v_po,v_matnr, v_maktx, v_qty, v_date, v_name, v_eknam,v_lifnr .
clear wa_output.
loop at i_output into wa_output.
on change of wa_output-ebeln.
clear v_lines.
loop at i_eket into wa_eket
where ebeln = wa_output-ebeln.
v_lines = v_lines + 1.
clear wa_eket.
endloop.
**-- Checking of page break
v_lines = sy-linno + v_lines .
if 55 < v_lines .
write:/0(161) sy-uline.
new-page.
endif.
clear v_lines.
loop at i_eket into wa_eket
where ebeln = wa_output-ebeln.
v_lines = v_lines + 1.
clear wa_eket.
endloop.
*-- Calculating the due qty.
wa_output-dumng = wa_output-menge - wa_output-wemng.
*-- Writing the Line items of the PO.
read table i_ekpo into wa_ekpo
with key ebeln = wa_output-ebeln
ebelp = wa_output-ebelp.
l_rate = wa_ekpo-netpr / wa_ekpo-peinh.
*-- Writing of PO detail
if wa_output-dumng gt 0 .
v_qty = wa_output-dumng.
v_date1 = wa_output-eindt.
v_maktx = wa_output-maktx.
if wa_output-maktx+0(1) = '"' .
concatenate c_equal wa_output-maktx
into v_maktx .
else .
concatenate c_equal c_colon wa_output-maktx c_colon
into v_maktx .
endif .
if wa_output-name1+0(1) = '"' .
concatenate c_equal wa_output-name1
into v_name .
else .
concatenate c_equal c_colon wa_output-name1 c_colon
into v_name .
endif .
v_name = wa_output-name1.
v_lifnr = wa_output-lifnr.
write wa_output-eindt to v_date1 DD/MM/YYYY.
concatenate '="' wa_output-ebeln '/'
wa_output-ebelp '"' into v_po .
concatenate '="' wa_output-matnr '"' into v_matnr .
concatenate c_equal c_colon wa_output-maktx c_colon
into v_maktx .
concatenate c_equal c_colon wa_output-dumng c_colon
into v_qty1 .
concatenate c_equal c_colon wa_output-eindt c_colon
into v_date1 .
concatenate c_equal c_colon wa_output-name1 c_colon
into v_name .
concatenate c_equal c_colon wa_output-eknam c_colon
into v_eknam .
concatenate c_equal c_colon wa_output-lifnr c_colon
into v_lifnr .
concatenate c_equal c_colon wa_mard-werks '/'
wa_mard-lgort c_colon
into v_lgort .
concatenate '="' wa_output-lifnr '"' into v_lifnr .
condense:v_po,v_matnr, v_maktx, v_qty, v_date, v_name, v_eknam,v_lifnr .
concatenate
v_po v_matnr v_maktx v_qty
v_date1 v_name v_eknam v_lifnr
into i_download
SEPARATED BY con_tab.
concatenate con_cret i_download INTO i_download .
append i_download .
endif.
clear : v_po,v_matnr, v_maktx, v_qty, v_date, v_name, v_eknam,v_lifnr .
endloop.
ENDFORM. " fill_report_csv
*& Form f_send_internet_mail
text
--> p1 text
<-- p2 text
FORM f_send_internet_mail.
Variables
data: it_packing_list like sopcklsti1 occurs 0 with header line,
it_contents like solisti1 occurs 0 with header line,
it_receivers like somlreci1 occurs 0 with header line,
it_attachment like solisti1 occurs 0 with header line,
gd_cnt type i,
gd_sent_all(1) type c,
gd_doc_data like sodocchgi1,
gd_error type sy-subrc.
data: it_message type standard table of SOLISTI1 initial size 0
with header line.
data : found_receiver type c,
v_title(80) type c,
l_text(180) type c.
Fill the document data.
gd_doc_data-doc_size = 1.
Adds text to email text table
append 'Pls see attached open purchase order report.' to it_message.
append '' to it_message.
concatenate 'Note: This is system generated report'
', figures may subject to actual physical count.'
into l_text separated by space.
append l_text to it_message.
Populate the subject/generic message attributes
CLEAR gd_doc_data.
READ TABLE i_download INDEX w_cnt.
gd_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( i_download ).
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SAPRPT'.
if p_asdate is initial .
concatenate p_title ' '
sy-datum sy-uzeit into v_title separated by space.
else .
concatenate p_title ' '
p_bldat p_cputm into v_title separated by space.
endif .
gd_doc_data-obj_descr = v_title .
gd_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = i_download[].
Describe the body of the message
clear it_packing_list.
refresh it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
describe table it_message lines it_packing_list-body_num.
it_packing_list-doc_type = 'RAW'.
append it_packing_list.
Create attachment notification
it_packing_list-transf_bin = 'X'.
it_packing_list-head_start = 1.
it_packing_list-head_num = 1.
it_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES it_packing_list-body_num.
it_packing_list-doc_type = 'XLS'.
it_packing_list-obj_descr = 'OPEN PURCHASE ORDER' .
it_packing_list-obj_name = 'PO.XLS' .
it_packing_list-doc_size = it_packing_list-body_num * 255.
APPEND it_packing_list.
assign SAP user smtp address from successful retrieval.
loop at p_email.
Add the recipients email address
found_receiver = 'X' .
it_receivers-receiver = p_email-low.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = ''.
it_receivers-notif_ndel = 'X'.
append it_receivers .
endloop .
Add default recipient email when unable to locate purc group email
if found_receiver is initial .
it_receivers-receiver = p_email.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = ''.
it_receivers-notif_ndel = 'X'.
append it_receivers.
endif .
Call the FM to post the message to SAPMAIL
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
exporting
document_data = gd_doc_data
put_in_outbox = 'X'
commit_work = 'X'
importing
sent_to_all = gd_sent_all
tables
packing_list = it_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = it_receivers
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
Store function module return code
gd_error = sy-subrc.
Get it_receivers return code
loop at it_receivers.
endloop.
Instructs mail send program for SAPCONNECT to send email.
wait up to 2 seconds.
if gd_error eq 0.
submit rsconn01 with mode = 'INT'
with output = ' '
and return.
endif.
ENDFORM. " f_send_internet_mailHi,
go through this link,
http://www.sapdevelopment.co.uk/reporting/email/emailhome.htm
you have some sample programs.
Regards,
Raghavendra -
Hi all,
i have a written a report where i need to send the report output to somebody via
E-mail.i am sending this report output via E-mail successfully.The receiver receives, my output in excel format.but this excel is not <b>pivoted</b>.
i want , the receiver should get my output in pivoted excel format.i.e my output data should be exactly fit in the excel sheet.
now the columns in excel sheet are overlapping.once i double clicked, the columns are getting separated.i do not want to double click.i want all the columns should come properly i.e excel field length should be adjusted as per the output field length.
i am giving my coding below.plz suggest how i can do the above thing .it's urgent.
any idea will be highly appreaciated.
Regards
if not p_email1 is initial.
perform fill_report_csv.
perform f_send_internet_mail.
endif.
FORM fill_report_csv.
data : l_text(232) type c,
v_matnr1(21) type c,
v_matnr(21) type c,
v_matkl(14) type c,
v_maktx(45) type c,
v_ttlstk(14) type c,
v_verpr(14) type c,
v_werks(14) type c,
v_lgort(14) type c,
v_char(10) type c,
v_stks type p ,
v_po(40) type c,
v_qty(13) type c,
v_qty1 type sy-datum,
v_date(15) type c,
v_date1(15) TYPE C,
v_name(35) type c,
v_eknam(18) type c,
v_lifnr(15) type c,
l_po(40) type c,
v_matnr(20) type c,
l_rate(11) type p decimals 5,
l_flag type c.
concatenate c_equal c_colon 'PO no.' c_colon
into v_po.
concatenate c_equal c_colon 'Material no.' c_colon
into v_matnr.
concatenate c_equal c_colon 'Description.' c_colon
into v_maktx.
concatenate c_equal c_colon 'Due Qty.' c_colon
into v_qty.
concatenate c_equal c_colon 'Del Date.' c_colon
into v_date.
concatenate c_equal c_colon 'Vendor.' c_colon
into v_name.
concatenate c_equal c_colon 'Buyer.' c_colon
into v_eknam.
concatenate c_equal c_colon 'Vendor Code.' c_colon
into v_lifnr.
concatenate
v_po v_matnr v_maktx v_qty
v_date v_name v_eknam v_lifnr
into i_download
SEPARATED BY con_tab.
append i_download .
clear : v_po,v_matnr, v_maktx, v_qty, v_date, v_name, v_eknam,v_lifnr .
clear wa_output.
loop at i_output into wa_output.
on change of wa_output-ebeln.
clear v_lines.
loop at i_eket into wa_eket
where ebeln = wa_output-ebeln.
v_lines = v_lines + 1.
clear wa_eket.
endloop.
**-- Checking of page break
v_lines = sy-linno + v_lines .
if 55 < v_lines .
write:/0(161) sy-uline.
new-page.
endif.
clear v_lines.
loop at i_eket into wa_eket
where ebeln = wa_output-ebeln.
v_lines = v_lines + 1.
clear wa_eket.
endloop.
*-- Calculating the due qty.
wa_output-dumng = wa_output-menge - wa_output-wemng.
*-- Writing the Line items of the PO.
read table i_ekpo into wa_ekpo
with key ebeln = wa_output-ebeln
ebelp = wa_output-ebelp.
l_rate = wa_ekpo-netpr / wa_ekpo-peinh.
*-- Writing of PO detail
if wa_output-dumng gt 0 .
v_qty = wa_output-dumng.
v_date1 = wa_output-eindt.
v_maktx = wa_output-maktx.
if wa_output-maktx+0(1) = '"' .
concatenate c_equal wa_output-maktx
into v_maktx .
else .
concatenate c_equal c_colon wa_output-maktx c_colon
into v_maktx .
endif .
if wa_output-name1+0(1) = '"' .
concatenate c_equal wa_output-name1
into v_name .
else .
concatenate c_equal c_colon wa_output-name1 c_colon
into v_name .
endif .
v_name = wa_output-name1.
v_lifnr = wa_output-lifnr.
write wa_output-eindt to v_date1 DD/MM/YYYY.
concatenate '="' wa_output-ebeln '/'
wa_output-ebelp '"' into v_po .
concatenate '="' wa_output-matnr '"' into v_matnr .
concatenate c_equal c_colon wa_output-maktx c_colon
into v_maktx .
concatenate c_equal c_colon wa_output-dumng c_colon
into v_qty1 .
concatenate c_equal c_colon wa_output-eindt c_colon
into v_date1 .
concatenate c_equal c_colon wa_output-name1 c_colon
into v_name .
concatenate c_equal c_colon wa_output-eknam c_colon
into v_eknam .
concatenate c_equal c_colon wa_output-lifnr c_colon
into v_lifnr .
concatenate c_equal c_colon wa_mard-werks '/'
wa_mard-lgort c_colon
into v_lgort .
concatenate '="' wa_output-lifnr '"' into v_lifnr .
condense:v_po,v_matnr, v_maktx, v_qty, v_date, v_name, v_eknam,v_lifnr .
concatenate
v_po v_matnr v_maktx v_qty
v_date1 v_name v_eknam v_lifnr
into i_download
SEPARATED BY con_tab.
concatenate con_cret i_download INTO i_download .
append i_download .
endif.
clear : v_po,v_matnr, v_maktx, v_qty, v_date, v_name, v_eknam,v_lifnr .
endloop.
ENDFORM. " fill_report_csv
*& Form f_send_internet_mail
text
--> p1 text
<-- p2 text
FORM f_send_internet_mail.
Variables
data: it_packing_list like sopcklsti1 occurs 0 with header line,
it_contents like solisti1 occurs 0 with header line,
it_receivers like somlreci1 occurs 0 with header line,
it_attachment like solisti1 occurs 0 with header line,
gd_cnt type i,
gd_sent_all(1) type c,
gd_doc_data like sodocchgi1,
gd_error type sy-subrc.
data: it_message type standard table of SOLISTI1 initial size 0
with header line.
data : found_receiver type c,
v_title(80) type c,
l_text(180) type c.
Fill the document data.
gd_doc_data-doc_size = 1.
Adds text to email text table
append 'Pls see attached open purchase order report.' to it_message.
append '' to it_message.
concatenate 'Note: This is system generated report'
', figures may subject to actual physical count.'
into l_text separated by space.
append l_text to it_message.
Populate the subject/generic message attributes
CLEAR gd_doc_data.
READ TABLE i_download INDEX w_cnt.
gd_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( i_download ).
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SAPRPT'.
if p_asdate is initial .
concatenate p_title ' '
sy-datum sy-uzeit into v_title separated by space.
else .
concatenate p_title ' '
p_bldat p_cputm into v_title separated by space.
endif .
gd_doc_data-obj_descr = v_title .
gd_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = i_download[].
Describe the body of the message
clear it_packing_list.
refresh it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
describe table it_message lines it_packing_list-body_num.
it_packing_list-doc_type = 'RAW'.
append it_packing_list.
Create attachment notification
it_packing_list-transf_bin = 'X'.
it_packing_list-head_start = 1.
it_packing_list-head_num = 1.
it_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES it_packing_list-body_num.
it_packing_list-doc_type = 'XLS'.
it_packing_list-obj_descr = 'OPEN PURCHASE ORDER' .
it_packing_list-obj_name = 'PO.XLS' .
it_packing_list-doc_size = it_packing_list-body_num * 255.
APPEND it_packing_list.
assign SAP user smtp address from successful retrieval.
loop at p_email.
Add the recipients email address
found_receiver = 'X' .
it_receivers-receiver = p_email-low.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = ''.
it_receivers-notif_ndel = 'X'.
append it_receivers .
endloop .
Add default recipient email when unable to locate purc group email
if found_receiver is initial .
it_receivers-receiver = p_email.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = ''.
it_receivers-notif_ndel = 'X'.
append it_receivers.
endif .
Call the FM to post the message to SAPMAIL
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
exporting
document_data = gd_doc_data
put_in_outbox = 'X'
commit_work = 'X'
importing
sent_to_all = gd_sent_all
tables
packing_list = it_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = it_receivers
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
Store function module return code
gd_error = sy-subrc.
Get it_receivers return code
loop at it_receivers.
endloop.
Instructs mail send program for SAPCONNECT to send email.
wait up to 2 seconds.
if gd_error eq 0.
submit rsconn01 with mode = 'INT'
with output = ' '
and return.
endif.
ENDFORM. " f_send_internet_mailans
-
Report output to convert to pdf and mail it to recepient
Hi
I'm using the below coding for converting the output of the program to pdf and then mail it to the recepient.The coding works for background processsing only can i do the same for online.In the write statement i'm using the sy-repid my program name and when i get the pdf mail i'm getting the name of the program but instead i need to get the output of my program.Can any one help me in correcting the coding to get the output in pdf format.I know where i'm going wrong but this is the first time i'm working with this so new to this....It would be better if i could run the program and get the convertions into pdf through mail instead of background processing.....Please change the coding below to get the same.....
DATA: gd_recsize TYPE i.
Spool IDs
TYPES: BEGIN OF t_tbtcp.
INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
wa_tbtcp TYPE t_tbtcp.
Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
gd_eventparm LIKE tbtcm-eventparm,
gd_external_program_active LIKE tbtcm-xpgactive,
gd_jobcount LIKE tbtcm-jobcount,
gd_jobname LIKE tbtcm-jobname,
gd_stepcount LIKE tbtcm-stepcount,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_sender_type LIKE soextreci1-adr_typ,
gd_attachment_desc TYPE so_obj_nam,
gd_attachment_name TYPE so_obj_des.
Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
gd_destination LIKE rlgrap-filename,
gd_bytecount LIKE tst01-dsize,
gd_buffer TYPE string.
Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
c_no(1) TYPE c VALUE ' ',
c_device(4) TYPE c VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
Write statement to represent report output. Spool request is created
if write statement is executed in background. This could also be an
ALV grid which would be converted to PDF without any extra effort
WRITE sy-repid.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
PERFORM get_job_details.
PERFORM obtain_spool_id.
Alternative way could be to submit another program and store spool
id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
to sap-spool
spool parameters %_print
archive parameters %_print
without spool dynpro
and return.
Get spool id from program called above
IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
PERFORM convert_spool_to_pdf.
PERFORM process_email.
if p_delspl EQ 'X'.
PERFORM delete_spool.
endif.
IF sy-sysid = c_dev.
wait up to 5 seconds.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDIF.
ELSE.
SKIP.
WRITE:/ 'Program must be executed in background in-order for spool'
'request to be created.'.
ENDIF.
FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> '0000000000'
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
message s004(zdd) with gd_spool_nr.
gd_spool_nr = wa_tbtcp-listident.
MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
MESSAGE s005(zdd).
ENDIF.
ENDFORM.
FORM get_job_details *
FORM get_job_details.
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
ENDFORM.
FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att = gd_buffer.
APPEND it_mess_att.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
perform send_email using p_email2.
ENDFORM.
FORM send_email *
--> p_email *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject = 'Branch Revenue'.
gd_attachment_desc = 'Branch Revenue'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Branch Revenue,Profit and Commissions'.
APPEND it_mess_bod.
it_mess_bod = 'Message Body text, line 2...'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_mess_bod
it_mess_att
using p_email
'Branch Revenue'
'PDF'
gd_attachment_name
gd_attachment_desc
p_sender
gd_sender_type
changing gd_error
gd_reciever.
ENDFORM.
FORM delete_spool *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = ld_spool_nr.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables it_message
it_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
Thanks in advance.....Hi
Below is the code I was used to convert the sap script( Sales Order) to convert to PDf and send as an attachment.
Dev/UDD Id : EUR-770416 *
Author : M.Sreeram Kumar *
Date : 08-Apr-07 *
Request : DU1K933766
Description: Send an order confirmation to the multiple user in a *
PDF format via Email. *
Change Log *
Author : *
Date : *
Description : *
Request : *
Print of an order confirmation by SAPscript
REPORT zrep_email LINE-COUNT 100 MESSAGE-ID vn.
TABLES: komk, "Communicationarea for conditions
komp, "Communicationarea for conditions
komvd, "Communicationarea for conditions
vbco3, "Communicationarea for view
vbdka, "Headerview
vbdpa, "Itemview
vbdpau, "Subitemnumbers
conf_out, "Configuration data
sadr, "Addresses
tvag, "Reason for rejection
vedka, "Servicecontract head data
vedpa, "Servicecontract position data
vedkn, "Servicecontract head notice data
vedpn, "Servicecontract pos. notice data
vbpa, "Sales Document: Partner
kna1, "General Data in Customer Master
riserls, "Serialnumbers
komser, "Serialnumbers for print
tvbur, "Sales office
tvko, "Sales organisation
adrs, "Communicationarea for Address
fpltdr. "billing schedules
INCLUDE zrep_rvadtabl.
*INCLUDE yzrvadtabl.
*INCLUDE RVADTABL.
INCLUDE zrep_rvdirekt.
*INCLUDE yzrvdirekt.
*INCLUDE RVDIREKT.
INCLUDE zrep_vedadata.
*INCLUDE yzvedadata.
*INCLUDE VEDADATA.
DATA: retcode LIKE sy-subrc. "Returncode
DATA: repeat(1) TYPE c.
DATA: xscreen(1) TYPE c. "Output on printer or screen
DATA: BEGIN OF steu, "Controldata for output
vdkex(1) TYPE c,
vdpex(1) TYPE c,
kbkex(1) TYPE c,
kbpex(1) TYPE c,
END OF steu.
DATA: BEGIN OF tvbdpa OCCURS 0. "Internal table for items
INCLUDE STRUCTURE vbdpa.
DATA: END OF tvbdpa.
DATA: BEGIN OF tkomv OCCURS 50.
INCLUDE STRUCTURE komv.
DATA: END OF tkomv.
DATA: BEGIN OF tkomvd OCCURS 50.
INCLUDE STRUCTURE komvd.
DATA: END OF tkomvd.
DATA: BEGIN OF tvbdpau OCCURS 5.
INCLUDE STRUCTURE vbdpau.
DATA: END OF tvbdpau.
DATA: BEGIN OF tkomcon OCCURS 50.
INCLUDE STRUCTURE conf_out.
DATA: END OF tkomcon.
DATA: BEGIN OF tkomservh OCCURS 1.
INCLUDE STRUCTURE vedka.
DATA: END OF tkomservh.
DATA: BEGIN OF tkomservp OCCURS 5.
INCLUDE STRUCTURE vedpa.
DATA: END OF tkomservp.
DATA: BEGIN OF tkomservhn OCCURS 5.
INCLUDE STRUCTURE vedkn.
DATA: END OF tkomservhn.
DATA: BEGIN OF tkomservpn OCCURS 5.
INCLUDE STRUCTURE vedpn.
DATA: END OF tkomservpn.
DATA: BEGIN OF tkomser OCCURS 5.
INCLUDE STRUCTURE riserls.
DATA: END OF tkomser.
DATA: BEGIN OF tkomser_print OCCURS 5.
INCLUDE STRUCTURE komser.
DATA: END OF tkomser_print.
DATA: BEGIN OF tfpltdr OCCURS 5.
INCLUDE STRUCTURE fpltdr.
DATA: END OF tfpltdr.
DATA: pr_kappl(01) TYPE c VALUE 'V'. "Application for pricing
DATA: BEGIN OF char_val OCCURS 0,
atnam LIKE cabn-atnam,
atwrt LIKE ausp-atwrt,
END OF char_val.
FORM entry USING return_code us_screen.
CLEAR retcode.
xscreen = us_screen.
PERFORM processing.
IF retcode NE 0.
return_code = 1.
ELSE.
return_code = 0.
ENDIF.
ENDFORM. "ENTRY
FORM PROCESSING *
FORM processing.
PERFORM get_data.
CHECK retcode = 0.
PERFORM form_open USING xscreen vbdka-land1.
CHECK retcode = 0.
PERFORM logo_selection.
PERFORM form_title_print.
CHECK retcode = 0.
PERFORM write_header_info.
PERFORM validity_print.
CHECK retcode = 0.
PERFORM header_data_print.
CHECK retcode = 0.
PERFORM header_serv_print.
CHECK retcode = 0.
PERFORM header_notice_print.
CHECK retcode = 0.
PERFORM header_inter_print.
CHECK retcode = 0.
PERFORM header_text_print.
CHECK retcode = 0.
PERFORM item_print.
CHECK retcode = 0.
PERFORM end_print.
CHECK retcode = 0.
PERFORM form_close.
CHECK retcode = 0.
PERFORM zemail_process.
ENDFORM. "PROCESSING
S U B R O U T I N E S *
FORM ALTERNATIVE_ITEM *
A text is printed, if the item is an alternative item. *
FORM alternative_item.
CHECK vbdpa-grpos CN '0'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ALTERNATIVE_ITEM'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "ALTERNATIVE_ITEM
FORM CHECK_REPEAT *
A text is printed, if it is a repeat print for the document. *
FORM check_repeat.
CLEAR repeat.
SELECT * INTO *nast FROM nast WHERE kappl = nast-kappl
AND objky = nast-objky
AND kschl = nast-kschl
AND spras = nast-spras
AND parnr = nast-parnr
AND parvw = nast-parvw
AND nacha BETWEEN '1' AND '4'.
CHECK *nast-vstat = '1'.
repeat = 'X'.
EXIT.
ENDSELECT.
ENDFORM. "CHECK_REPEAT
FORM DELIVERY_DATE *
If the delivery date in the item is different to the header *
date and there are no scheduled quantities, the delivery date *
is printed in the item block. *
FORM delivery_date.
IF vbdka-lfdat = space AND
vbdpa-lfdat NE space AND
vbdpa-etenr_da = space.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_DELIVERY_DATE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDFORM. "DELIVERY_DATE
FORM DIFFERENT_CONSIGNEE *
If the consignee in the item is different to the header con- *
signee, it is printed by this routine. *
FORM different_consignee.
CHECK vbdka-name1_we NE vbdpa-name1_we
OR vbdka-name2_we NE vbdpa-name2_we
OR vbdka-name3_we NE vbdpa-name3_we
OR vbdka-name4_we NE vbdpa-name4_we.
CHECK vbdpa-name1_we NE space
OR vbdpa-name2_we NE space
OR vbdpa-name3_we NE space
OR vbdpa-name4_we NE space.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_CONSIGNEE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "DIFFERENT_CONSIGNEE
FORM DIFFERENT_REFERENCE_NO *
If the reference number in the item is different to the header*
reference number, it is printed by this routine. *
FORM different_reference_no.
CHECK vbdpa-vbeln_vang NE vbdka-vbeln_vang
OR vbdpa-vbtyp_vang NE vbdka-vbtyp_vang.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_REFERENCE_NO'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "DIFFERENT_REFERENCE_NO
FORM DIFFERENT_TERMS *
If the terms in the item are different to the header terms, *
they are printed by this routine. *
FORM different_terms.
DATA: us_vposn LIKE vedpa-vposn.
DATA: us_text(1) TYPE c. "Flag for Noticetext was printed
IF vbdpa-zterm NE vbdka-zterm AND
vbdpa-zterm NE space.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_PAYMENT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
IF vbdpa-inco1 NE space.
IF vbdpa-inco1 NE vbdka-inco1 OR
vbdpa-inco2 NE vbdka-inco2.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_DELIVERY'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDIF.
Print different validity-data for the position
READ TABLE tkomservp WITH KEY vbdpa-posnr.
IF sy-subrc EQ 0.
vedpa = tkomservp.
IF vedpa-vbegdat NE space AND
vedpa-venddat NE space AND
NOT vedpa-vbegdat IS INITIAL AND
NOT vedpa-venddat IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_SERV1'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ELSEIF vedpa-vbegdat NE space AND
NOT vedpa-vbegdat IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_SERV2'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_SERV3'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDIF.
Notice-rules for the positions.
MOVE vbdpa-posnr TO us_vposn.
CLEAR us_text.
LOOP AT tkomservpn WHERE vposn = us_vposn.
vedpn = tkomservpn.
IF us_text IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_NOTTXT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
us_text = charx.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_NOTICE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDLOOP.
IF NOT us_text IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'EMPTY_LINE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDFORM. "DIFFERENT_TERMS
FORM END_PRINT *
FORM end_print.
PERFORM get_header_prices.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'PROTECT'.
PERFORM header_price_print.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'END_VALUES'.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'ENDPROTECT'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'SUPPLEMENT_TEXT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "END_PRINT
FORM FORM_CLOSE *
End of printing the form *
FORM form_close.
CALL FUNCTION 'CLOSE_FORM'
EXCEPTIONS
OTHERS = 1.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT =
RDI_RESULT =
TABLES
otfdata = t_otfdata
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SEND_ERROR = 3
SPOOL_ERROR = 4
CODEPAGE = 5
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF sy-subrc NE 0.
PERFORM protocol_update.
retcode = 1.
ENDIF.
SET COUNTRY space.
ENDFORM. "FORM_CLOSE
FORM FORM_OPEN *
Start of printing the form *
--> US_SCREEN Output on screen *
' ' = printer *
'X' = screen *
--> US_COUNTRY County for telecommunication and SET COUNTRY *
FORM form_open USING us_screen us_country.
INCLUDE zrep_rvadopfo.
INCLUDE yzrvadopfo.
INCLUDE RVADOPFO.
ENDFORM. "FORM_OPEN
FORM FORM_TITLE_PRINT *
Printing of the form title depending of the field VBTYP *
FORM form_title_print.
CASE vbdka-vbtyp.
WHEN 'A'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_A'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'B'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_B'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'C'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_C'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'E'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_E'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'F'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_F'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'G'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_F'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'H'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_H'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'K'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_K'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'L'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_L'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN OTHERS.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_OTHERS'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDCASE.
IF repeat NE space.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'REPEAT'
window = 'REPEAT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDFORM. "FORM_TITLE_PRINT
FORM GET_DATA *
General provision of data for the form *
FORM get_data.
DATA: us_veda_vbeln LIKE veda-vbeln.
DATA: us_veda_posnr_low LIKE veda-vposn.
CALL FUNCTION 'RV_PRICE_PRINT_REFRESH'
TABLES
tkomv = tkomv.
CLEAR komk.
CLEAR komp.
vbco3-mandt = sy-mandt.
vbco3-spras = nast-spras.
vbco3-vbeln = nast-objky.
vbco3-kunde = nast-parnr.
vbco3-parvw = nast-parvw.
CALL FUNCTION 'RV_DOCUMENT_PRINT_VIEW'
EXPORTING
comwa = vbco3
IMPORTING
kopf = vbdka
TABLES
pos = tvbdpa.
Fetch servicecontract-data and notice-data for head and position.
us_veda_vbeln = vbdka-vbeln.
us_veda_posnr_low = posnr_low.
CALL FUNCTION 'SD_VEDA_GET_PRINT_DATA'
EXPORTING
i_document_number = us_veda_vbeln
i_language = sy-langu
i_posnr_low = us_veda_posnr_low
TABLES
print_data_pos = tkomservp
print_data_head = tkomservh
print_notice_pos = tkomservpn
print_notice_head = tkomservhn.
PERFORM get_controll_data.
PERFORM sender.
PERFORM check_repeat.
PERFORM tvbdpau_create.
ENDFORM. "GET_DATA
FORM GET_ITEM_BILLING_SCHEDULES *
In this routine the billing schedules are fetched from the *
database. *
FORM get_item_billing_schedules.
REFRESH tfpltdr.
CHECK NOT vbdpa-fplnr IS INITIAL.
CALL FUNCTION 'BILLING_SCHED_PRINTVIEW_READ'
EXPORTING
i_fplnr = vbdpa-fplnr
i_language = nast-spras
TABLES
zfpltdr = tfpltdr.
ENDFORM. "GET_ITEM_BILLING_SCHEDULES
*& Form ITEM_BILLING_SCHEDULES_PRINT
This routine prints the billing shedules of a salesdocument *
position. *
FORM item_billing_schedules_print.
DATA: first_line(1) TYPE c.
first_line = charx.
LOOP AT tfpltdr.
fpltdr = tfpltdr.
Output of the following printlines
IF NOT fpltdr-perio IS INITIAL.
periodische Fakturen
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_BILLING_SCHEDULE_PERIODIC'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
bei periodischen nur eine Zeile
EXIT.
ELSEIF fpltdr-fareg CA '14'.
prozentuale Teilfakturierung
IF NOT first_line IS INITIAL.
CLEAR first_line.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_BILLING_SCHEDULE_PERCENT_HEADER'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_BILLING_SCHEDULE_PERCENT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ELSEIF fpltdr-fareg CA '235'.
wertmäßige Teilfakturierung
IF NOT first_line IS INITIAL.
CLEAR first_line.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_BILLING_SCHEDULE_VALUE_HEADER'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_BILLING_SCHEDULE_VALUE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ELSEIF fpltdr-fareg CA '3'.
Schlußrechnung
ENDIF.
ENDLOOP.
ENDFORM. "ITEM_BILLING_SCHEDULES_PRINT
*eject
FORM GET_ITEM_CHARACTERISTICS *
In this routine the configuration data item is fetched from *
the database. *
FORM get_item_characteristics.
REFRESH tkomcon.
CHECK NOT vbdpa-cuobj IS INITIAL.
CALL FUNCTION 'CUD0_GET_CONFIGURATION' "#EC EXISTS
EXPORTING
instance = vbdpa-cuobj
language = nast-spras
TABLES
configuration = tkomcon
EXCEPTIONS
OTHERS = 4.
ENDFORM. "GET_ITEM_CHARACTERISTICS
FORM GET_ITEM_PRICES *
In this routine the price data for the item is fetched from *
the database. *
FORM get_item_prices.
CLEAR: komp,
tkomv.
IF komk-knumv NE vbdka-knumv.
CLEAR komk.
komk-mandt = sy-mandt.
komk-kalsm = vbdka-kalsm.
komk-kappl = pr_kappl.
komk-waerk = vbdka-waerk.
komk-knumv = vbdka-knumv.
komk-vbtyp = vbdka-vbtyp.
ENDIF.
komp-kposn = vbdpa-posnr.
CALL FUNCTION 'RV_PRICE_PRINT_ITEM'
EXPORTING
comm_head_i = komk
comm_item_i = komp
language = nast-spras
IMPORTING
comm_head_e = komk
comm_item_e = komp
TABLES
tkomv = tkomv
tkomvd = tkomvd.
ENDFORM. "GET_ITEM_PRICES
FORM GET_HEADER_PRICES *
In this routine the price data for the header is fetched from *
the database. *
FORM get_header_prices.
CALL FUNCTION 'RV_PRICE_PRINT_HEAD'
EXPORTING
comm_head_i = komk
language = nast-spras
IMPORTING
comm_head_e = komk
TABLES
tkomv = tkomv
tkomvd = tkomvd.
ENDFORM. "GET_HEADER_PRICES
*& Form HEADER_DATA_PRINT
Printing of header data like terms, weights .... *
FORM header_data_print.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'HEADER_DATA'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. " HEADER_DATA_PRINT
FORM HEADER_PRICE_PRINT *
Printout of the header prices *
FORM header_price_print.
LOOP AT tkomvd.
AT FIRST.
IF komk-supos NE 0.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_SUM'.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'UNDER_LINE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDAT.
komvd = tkomvd.
IF komvd-koaid = 'D'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TAX_LINE'.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'SUM_LINE'.
ENDIF.
ENDLOOP.
DESCRIBE TABLE tkomvd LINES sy-tfill.
IF sy-tfill = 0.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'UNDER_LINE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDFORM. "HEADER_PRICE_PRINT
FORM HEADER_TEXT_PRINT *
Printout of the headertexts *
FORM header_text_print.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'HEADER_TEXT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "HEADER_TEXT_PRINT
FORM ITEM_CHARACERISTICS_PRINT *
Printout of the item characteristics -> configuration *
FORM item_characteristics_print.
LOOP AT tkomcon.
conf_out = tkomcon.
IF sy-tabix = 1.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_LINE_CONFIGURATION_HEADER'
EXCEPTIONS
OTHERS = 1.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_LINE_CONFIGURATION'
EXCEPTIONS
OTHERS = 1.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. "ITEM_CHARACTERISTICS_PRINT
FORM ITEM_DELIVERY_CONFIRMATION *
If the delivery date is not confirmed, a text is printed *
FORM item_delivery_confirmation.
CHECK vbdpa-lfdat = space.
CHECK vbdpa-kwmeng NE 0.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_DELIVERY_CONFIRMATION'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "ITEM_DELIVERY_CONFIRMATION
FORM ITEM_PRICE_PRINT *
Printout of the item prices *
FORM item_price_print.
LOOP AT tkomvd.
komvd = tkomvd.
IF sy-tabix = 1.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_LINE_PRICE_QUANTITY'.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_LINE_PRICE_TEXT'.
ENDIF.
ENDLOOP.
ENDFORM. "ITEM_PRICE_PRINT
FORM ITEM_PRINT *
Printout of the items *
FORM item_print.
DATA: da_subrc LIKE sy-subrc,
da_dragr LIKE tvag-dragr.
CALL FUNCTION 'WRITE_FORM' "First header
EXPORTING element = 'ITEM_HEADER'
EXCEPTIONS OTHERS = 1.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
CALL FUNCTION 'WRITE_FORM' "Activate header
EXPORTING element = 'ITEM_HEADER'
type = 'TOP'
EXCEPTIONS OTHERS = 1.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
LOOP AT tvbdpa.
vbdpa = tvbdpa.
TVAG lesen um festzustellen ob abgesagte Positionen gedruckt werden
sollen
PERFORM tvag_select(sapmv45a) USING vbdpa-abgru
da_dragr
space
da_subrc.
IF da_dragr EQ space. "Print rejected item?
IF vbdpa-posnr_neu NE space. "Item
PERFORM get_item_serials.
PERFORM get_item_characteristics.
PERFORM get_item_billing_schedules.
PERFORM get_item_prices.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'ENDPROTECT'.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'PROTECT'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_LINE'.
PERFORM item_rejected.
PERFORM item_price_print.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'ENDPROTECT'.
PERFORM item_text_print.
PERFORM item_serials_print.
PERFORM item_characteristics_print.
PERFORM alternative_item.
PERFORM delivery_date.
PERFORM item_delivery_confirmation.
PERFORM item_billing_schedules_print.
PERFORM different_reference_no.
PERFORM different_terms.
PERFORM different_consignee.
PERFORM schedule_header.
PERFORM main_item.
ELSE.
PERFORM schedule_print.
ENDIF.
ENDIF.
ENDLOOP.
CALL FUNCTION 'WRITE_FORM' "Deactivate Header
EXPORTING element = 'ITEM_HEADER'
function = 'DELETE'
type = 'TOP'
EXCEPTIONS OTHERS = 1.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "ITEM_PRINT
FORM ITEM_REJECTED *
A text is printed, if the item is rejected *
FORM item_rejected.
CHECK NOT vbdpa-abgru IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_REJECTED'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "ITEM_REJECTED
FORM MAIN_ITEM *
A text is printed, if the item is a main item * -
Report output sending as an attachement through mail
we are facing one problem while sending report output as an attachement to specific mail-ids.
Every thing is working fine.But for each row upto 255 characteers only it is printig.
Remaining is not comming.
We are using Function Module SO_DOCUMENT_SEND_API1.
Please help us to solve this.
Regards,
Phanicheck this code sample
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5931ff64-0a01-0010-2bb7-ff2f9a6165a0">E-mail ABAP Report List output in HTML format</a>
Regards
Raja -
Report Output to be mailed as an attachment-On Schedule
Hi ,
I have a requirement to develop a oracle report with reportbuilder6i,the report output should be in excel format,needs to be run every monday and has to be mailed to some id [email protected]
While converting it to excel output emp.xls using text_io iam saving it in some location .I want that emp.xls to be mailed to an email id ,also the report has to be scheduled to run periodically.
If any one has done it,can u share the details and code.
Thanks in Advance.
Regards,
RojaAt the first outset, I dont think, this is possible. Moreover, this approach is definitely not recommended since it will severely impact on the system performance and if there is a Security Team, they will not allow to have this practice.
Normally, either we can send as PDF attachment to any internal user via email or this can also be sent externally via PDF. There is also an option to view as PDF from the existing output itself.
G. Lakshmipathi -
Link to SAP Report Output from SAP Mail Inbox
Hi Experts,
I wants to send a link of SAP ALV Report output screen to SAP mail inbox and if a user clicks that link ,the report output
screen should open and user has to see & interact the ouput of that ALV Report.how can i achieve this without webdynpro
and workflow.
Regards,
Veera.Hi Asif
When I said 'pdf/rtf/html/htmlcss', I meant any one of the above.
You need to run the report as:
rwrun60 <report_name> <connection_string> desformat=pdf destype=mail desname=<email_id> batch=yes
In case you want to mail as HTMLCSS, replace PDF in DESFORMAT option in the above command to:
DESFORMAT=HTMLCSS.
Regards
Sripathy -
Hi Experts,
Can you give an example program on mailing ALV report output to any ID.
Thanks in advance.
Regards,
RamHi ram
Here i'm posting u sample code try to execute it. It will convert all the data in the related tables to excel format and transfer it to respective mail id
*& Report ZTESTMAIL *
REPORT ZTESTMAIL .
tables: ekko.
parameters: p_email type somlreci1-receiver default
'[email protected]'.
types: begin of t_ekpo,
ebeln type ekpo-ebeln,
ebelp type ekpo-ebelp,
aedat type ekpo-aedat,
matnr type ekpo-matnr,
end of t_ekpo.
data: it_ekpo type standard table of t_ekpo initial size 0,
wa_ekpo type t_ekpo.
types: begin of t_charekpo,
ebeln(10) type c,
ebelp(5) type c,
aedat(8) type c,
matnr(18) type c,
end of t_charekpo.
data: wa_charekpo type t_charekpo.
data: it_message type standard table of solisti1 initial size 0
with header line.
data: it_attach type standard table of solisti1 initial size 0
with header line.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1,
gd_error type sy-subrc,
gd_reciever type sy-subrc.
t_object_header = 'Text.xls'. append t_object_header.
*START_OF_SELECTION
start-of-selection.
* Retrieve sample data from table ekpo
perform data_retrieval.
* Populate table with detaisl to be entered into .xls file
perform build_xls_data_table.
*END-OF-SELECTION
end-of-selection.
* Populate message body text
perform populate_email_message_body.
* Send file by email as .xls speadsheet
perform send_file_as_email_attachment
tables it_message
it_attach
using p_email
'Example .xls documnet attachment'
'XLS'
'filename'
changing gd_error
gd_reciever.
* Instructs mail send program for SAPCONNECT to send email(rsconn01)
perform initiate_mail_execute_program.
*& Form DATA_RETRIEVAL
* Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp aedat matnr
up to 10 rows
from ekpo
into table it_ekpo.
endform. " DATA_RETRIEVAL
*& Form BUILD_XLS_DATA_TABLE
* Build data table for .xls document
form build_xls_data_table.
*CONSTANTS: con_cret TYPE x VALUE '0D', "OK for non Unicode
*con_tab TYPE x VALUE '09'. "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
constants:
con_tab type c value cl_abap_char_utilities=>horizontal_tab,
con_cret type c value cl_abap_char_utilities=>cr_lf.
concatenate 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
into it_attach separated by con_tab.
concatenate con_cret it_attach into it_attach.
append it_attach.
loop at it_ekpo into wa_charekpo.
concatenate wa_charekpo-ebeln wa_charekpo-ebelp
wa_charekpo-aedat wa_charekpo-matnr
into it_attach separated by con_tab.
concatenate con_cret it_attach into it_attach.
append it_attach.
endloop.
endform. " BUILD_XLS_DATA_TABLE
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
* Send email
form send_file_as_email_attachment tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
data: ld_error type sy-subrc,
ld_reciever type sy-subrc,
ld_mtitle like sodocchgi1-obj_descr,
ld_email like somlreci1-receiver,
ld_format type so_obj_tp ,
ld_attdescription type so_obj_nam ,
ld_attfilename type so_obj_des ,
ld_sender_address like soextreci1-receiver,
ld_sender_address_type like soextreci1-adr_typ,
ld_receiver like sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
* Fill the document data.
w_doc_data-doc_size = 1.
* Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
* Fill the document data and get size of attachment
clear w_doc_data.
read table it_attach index w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + strlen( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
clear t_attachment.
refresh t_attachment.
t_attachment[] = pit_attach[].
* Describe the body of the message
clear t_packing_list.
refresh t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
describe table it_message lines t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
append t_packing_list.
* Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
describe table t_attachment lines t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
append t_packing_list.
* Add the recipients email address
clear t_receivers.
refresh t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
append t_receivers.
call function 'SO_DOCUMENT_SEND_API1'
exporting
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
importing
sent_to_all = w_sent_all
tables
object_header = t_object_header
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
* Populate zerror return code
ld_error = sy-subrc.
* Populate zreceiver return code
loop at t_receivers.
ld_receiver = t_receivers-retrn_code.
endloop.
endform.
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
* Instructs mail send program for SAPCONNECT to send email.
form initiate_mail_execute_program.
wait up to 2 seconds.
submit rsconn01 with mode = 'INT'
with output = 'X'
and return.
endform. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
* Populate message body text
form populate_email_message_body.
refresh it_message.
it_message = 'Please find attached a list test ekpo records'.
append it_message.
endform. " POPULATE_EMAIL_MESSAGE_BODY
*PARAMETERS: psubject(40) type c default 'Testing',
*p_email(40) type c default '[email protected]'. "use ur email id
*data: it_packing_list like sopcklsti1 occurs 0 with header line,
*it_contents like solisti1 occurs 0 with header line,
*it_receivers like somlreci1 occurs 0 with header line,
*it_attachment like solisti1 occurs 0 with header line,
*gd_cnt type i,
*gd_sent_all(1) type c,
*gd_doc_data like sodocchgi1,
*gd_error type sy-subrc.
*data: it_message type standard table of SOLISTI1 initial size 0
*with header line.
**START-OF-SELECTION.
*START-OF-SELECTION.
*Perform populate_message_table.
**Send email message, although is not sent from SAP until mail send
**program has been executed(rsconn01)
*PERFORM send_email_message.
**Instructs mail send program for SAPCONNECT to send email(rsconn01)
*perform initiate_mail_execute_program.
**& Form POPULATE_MESSAGE_TABLE
** Adds text to email text table
*form populate_message_table.
*Append 'Line1' to it_message.
*Append 'Line2' to it_message.
*Append 'Line3' to it_message.
*Append 'Test- 1' to it_message.
*endform. " POPULATE_MESSAGE_TABLE
**& Form SEND_EMAIL_MESSAGE
** Send email message
*form send_email_message.
** Fill the document data.
*gd_doc_data-doc_size = 1.
** DATA: TAB_LINES LIKE sy-tabix.
** DESCRIBE TABLE it_message LINES TAB_LINES.
** READ TABLE it_message INDEX TAB_LINES.
** gd_doc_data-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( it_message )
** Populate the subject/generic message attributes
*gd_doc_data-obj_langu = sy-langu.
*gd_doc_data-obj_name = 'SAPRPT'.
*gd_doc_data-obj_descr = psubject.
*gd_doc_data-sensitivty = 'F'.
** Describe the body of the message
** Information about structure of data tables
*clear it_packing_list.
*refresh it_packing_list.
*it_packing_list-transf_bin = space.
*it_packing_list-head_start = 1.
*it_packing_list-head_num = 0.
*it_packing_list-body_start = 1.
*describe table it_message lines it_packing_list-body_num.
*it_packing_list-doc_type = 'RAW'.
*append it_packing_list.
** Add the recipients email address
*clear it_receivers.
*refresh it_receivers.
*it_receivers-receiver = p_email.
*it_receivers-rec_type = 'U'.
** it_receivers-com_type = 'INT'.
** it_receivers-notif_del = 'X'.
** it_receivers-notif_ndel = 'X'.
*append it_receivers.
** Call the FM to post the message to SAPMAIL
*call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
*exporting
*document_data = gd_doc_data
*put_in_outbox = 'X'
*importing
*sent_to_all = gd_sent_all
*tables
*packing_list = it_packing_list
*contents_txt = it_message
*receivers = it_receivers
*exceptions
*too_many_receivers = 1
*document_not_sent = 2
*document_type_not_exist = 3
*operation_no_authorization = 4
*parameter_error = 5
*x_error = 6
*enqueue_error = 7
*others = 8.
** Store function module return code
*gd_error = sy-subrc.
** Get it_receivers return code
*loop at it_receivers.
*endloop.
*endform. " SEND_EMAIL_MESSAGE
**& Form INITIATE_MAIL_EXECUTE_PROGRAM
** Instructs mail send program for SAPCONNECT to send email.
*form initiate_mail_execute_program.
*wait up to 2 seconds.
*if gd_error eq 0.
*submit rsconn01 with mode = 'INT'
*with output = 'X'
*and return.
*endif.
*endform. " INITIATE_MAIL_EXECUTE_PROGRAM
Rewards if helpfull
Regards
Pavan
Maybe you are looking for
-
Windows Vista ODBC install failure error 126
I'm attempting to set up ODBC connections using Client 10.2.0.3 in Windows Vista 32-bit as administrator, following instructions in MetaLink Note 415166.1. I'm not successful and get error code 126. I've found similar complaints on web searches, but
-
This may be a silly question but, When viewing footage on an NTSC monitor, my footage looks quite different than it does in FCP on the computer screen. If I do color correction just based on the NTSC monitor for DVD output, will that DVD look the sam
-
Anyone knows what do do when iMac doesn't recognize any USB or Bluetooth?
Hello, if anyone can help, please. my iMac does not recognize anything I plug into the USB ports in the back. I can't use any keyboard or mouse or track pad. It does not recognize any bluetooth such as magic mouse, wireless keyboard or track pad. Whe
-
Does "Target table" and "Error Table" need to be in same DB as OWB's?
We get the following error ORA-00600: internal error code, arguments: [opixrb-3], [1036], ORA-01036: illegal variable name/number at the time of OWB execution OWB seems to successfully log the errors rows in the error table when a) target table and i
-
Problems with Disappearing Mapping in whcshdata.htm
Hi again, We're using RoboHelp 9, and have had successful context sensitive page help in past releases. Suddenly, all the "page help" is gone, i.e., the user receives only the "home" page of the help, no matter what page is open.The whcshdata.htm fil