Report Page Size
greetings,
The problem is that by default the page skip in report 6i is after 12 inch but for our check printing case we have 3 cheques in 11 inch paper. we have so
designed our report such that three cheque data are printed in designated location in the preprinted stationary paper but when it comes to the next page it is not printing properly becoz it skips after
12 inch paper but the size of the three cheques together is 11 inch so the printing is not taking place in the designated position in the cheque. so if u
could me an idea it will be of very useful.
Thanking u
Regards
Shyam
Hi Paliyath
Then it looks like you are running reports in character mode. If this is the case, modify "Report Width" and "Report Height" under "Character Mode" against the section object.
Regards
Sripathy
Similar Messages
-
Setting Report Page Size in Ecplise Designer 1.0
Hello all,
I am trying to use Crystal Reports for Eclipse V1.0, and when using the ReportDesigner, I can't find a way to set the size of the report page I am laying out. by default, it seems to be an 8.5 x 11 inch page, but it defaults to Landscape mode. Anyone know how to change the layout of a report to be Portrait format?
Thanks,
MattUpgrade to version 2 and Test again.
Also check the sample applications from above tabs. -
Change report page size dynamically -URGENt
Hi,
I am developing one report for super market, and as per the req. of super market I want to control the page size during the runtime only.
Pleas help me regarding this.
Thanns in advance.
SharadYou can't actually change the page size.
But there are some things may help in this respect.
In the report layout you can have some frames that include different layouts for the same data and print those frames conditionally.
Or you may use two different .rdf for two different page sizes. -
I am using BI publisher in APEX to generate PDF report. Data is displayed only on paper size 8.5 X 11 regardless any paper size I select i.e. Letter 8.5x11, Legal 8.5x14, Tabloid 11x17, Custom 8.5x20.
You need to specify the paper size in the RTF template. Iif you are using RTF templates? If not its an APEX issue and needs to be addressed by them
Tim -
Programmatically Change Page Size
I have a main crystal report that has two sub reports in it. Which subreport is displayed is determined by formula logic in the suppress option of the section expert.
My issue revolves around the page size requirements for the two sub reports. One sub report MUST be printed on letter size paper (8.5 x 11) and the second sub report MUST be printed on legal size paper (8.5x14). Crystal is applying the page size set in the "main" report to both sub reports. Does anyone know of a way to change a reports page size at run time, without manual intervention?
I'm working with Crystal XI.
Thanx in advance.Hello,
I moved your post to the BOE forums. In CR 2008 you can set paper orientation for each section but you cannot change paper size. Your options may be setting up a double print job, Print first page and then second page etc. on a separate schedule.
Unless you use the SDK the BOE forum may be able to help you configure this suggestion. OnDemand report viewing should give you a manual option to print but again but not sure if it's configuable through the viewers themselves.
You may want to create a support case in Service Market Place and work directly with a support engineer.
Thank you
Don -
Formatting webI issue: page size such as othe normal US sizes are missing.
In a WebI report formatting "//page layout > page size", the report page size issue of other normal US sizes are missing. Such as: 11x17 inches. Is there a way we can include these page sizes?
I face a somewhat similar issue. We have existing reports in Reporting Services - that can present the complete data in one page PDF and similar page creation in webi is just not possible. With sections and data seperation the whole report comes in 3 or 4 pages and no recourse to manipulate page size.
I hope BO provides more enhancements to Webi - once adhoc users start creating reports they expect to see formatting that's traditionally present in canned reports -
How to create a report with different page sizes
Hi,
I would like to create a report with different page sizes, it's possible to do it with diadem?
When I change the layout parameters, changes afect to all sheets...
Is there a way to change page size individually for each sheet?
Thanks in advance.
MarcHi Marc,
You can use the DocStart and DocEnd commands along with the PicPrint command to spool multiple print commands to the same output PDF file using the direct printer approach. This should enable you to programmatically specify the page size differently for each sheet that you add to the print job.
' Print PDF Page by Page.VBS
OPTION EXPLICIT
Dim i, Path, OldPrintName
Path = AutoActPath & "2D Stacked"
Call DataDelAll
Call DataFileLoad(Path & ".TDM")
PDFFileName = Path & " Page by Page.pdf"
IF FileExist(PDFFileName) THEN Call FileDelete(PDFFileName)
OldPrintName = PrintName
PrintName = "winspool,DIAdem PDF Export,LPT1:" ' Set to PDF printer
PDFResolution = "72 DPI" ' "2400 DPI" , "default"
PDFOptimization = TRUE
PDFFontsEmbedded = FALSE
PDFJPGCompressed = "high"
PrintOrient = "landscape" ' orient paper
Call PrintMaxScale("GRAPH") ' auto-max, see alternative margin setting variables below
PrintLeftMarg = 0.181
PrintTopMarg = 0.181
PrintWidth = 10.67
'PrintHeigth = 7 (read-only)
Call WndShow("REPORT")
Call DocStart ' Begin multi-page document/print job
FOR i = 1 TO 4
Call PicLoad(Path & ".TDR")
Call GraphSheetNGet(1)
Call GraphSheetRename(GraphSheetName, "Page " & i)
Call PicUpdate
Call PicPrint("WinPrint") ' Add a page to be printed
NEXT ' i
Call DocEnd ' End multi-page document/print job
PrintName = OldPrintName
Call ExtProgram(PDFFileName)
Brad Turpin
DIAdem Product Support Engineer
National Instruments -
Crystal report 9 com+ pdf page size
Post Author: edp
CA Forum: Exporting
I build a dll with vb6 which indoor is present a report (pippo.dsr). The dll was insert in a COM+ application of our server. When i open the COM+ structure and the from an asp page i use the dll will be create a file .pdf perfectely. When i close the COM+ structure the same page asp will create a file .pdf with a strange page size (half of A4 format). Someone know the reason ? RegardsHi Alias,
Please ensure that the "reset page number after" is unmarked in the section expert on the grouping that this displaying in the report.
Regards,
Zack H. -
By default the page size in D2k reports (forms 6i) is 80 colum i.e. 8 1/2x11.
How can i enlarge the page size..i.e. i want to make if fanfold 15x12 inch i.e. 132 colum .How do i go about it?
please help.Hi Rajeev,
Set the Unit of Measurement in the Report property inspector, and then set the Height and Width in the Section (Header, Main or Trailer) property inspector.
Navneet. -
How We Can Change Page Size During Report Run Time
Hello !
How We Can Change Page Size During Report Run Time .
How can we stop to change the column name when we amend a sql in report data model.
Thanks !
nullhello sohail
1. question - i'm afraid this cannot be done ... bit in report 6 and newer you have posibility to divide your report in 3 parts (former header, body, trailor) and each part can have diferent page siz, orientation , ...
2. question - best is give each column in your statements in one report diferent alias. when you have to chnge something, alias will remain same ...
try this: select 1 as fist_column, 1 as second_column from dual
hope this helsp -
Setting the page size of a report to 5.5height and 8.5 width(size-inches)
Hi,
I want to set the report's page size on a dot matrix printer(for PAYSLIP) to 5.5 inches height * 8.5 inches width. But i'm not able to define my own size through the printer(custom size or user defined size). Some how i cannot see the custom size in the printer settings. Is there any way where i can define the size for the report. The report output is genrated to a pdf format. Will the settings remain same once generated to pdf format. Please let me know if there's any solution for this. Its very urgent.
Thanx.
Anu.Someone plaese reply to this.
-
Physical page size in reports 9i
Greetings all.
I am trying to create a report to print on multiform dot matrix epson printer. The height of the pre-printed form is 5.5".
Is it possible in graphics (bitmap) mode to define a custom size? Or is it only possible to do the same in charater mode?
I am able to do the settings on the printer control panel but the program settings always override and there is no custom size available in the page setup.
Please help!!
Thanks in advance.
MaheshHi Mahesh
You need to perform three task to design your report:
1. In Reports property palette, change the Unit of
dimesion. You can design the report in any of
different units i.e characters (charcater and bitmap
mode), points (bitmap), inches (bitmap) and centimeter.
2. Set the Dimension. Report can have any length and any
width. Because printer pages may be smaller or larger
then report, the concept of physical pages versus
logical pages are used in Reports. A logical page is
the size of one page of your actual report. You need
to set this ratio in reports properties.
3. Set the required page size in Reports section
properties. There are three sections: header,
body/margin and Reports trailer.
Hope this helps!
Thanks
The Oracle Reports Team -
PHYSICAL PAGE SIZE IN REPORT DESIGNER 2.5
I have designed a report in character mode and it prints on a page size of 15" * 5.5". Only one record is printed on one page. I have set the page size at design time and looks fine. I have also defined page as 130 * 33 characters. But when you run the report and send it to printer, and the end of each record page feed skips one page. i.e. printer feeds 11" paper or 66 line paper. Now how can I make the printer to set page size 5.5" or 33 lines.
Thank you.Check on your printer defintion file and modify it to match with your page size or print area. Hard work to modify from standard
HP files to legal (242x66) and letter (88(?)x134) since nobody or vendor or Oracle
provide (max)many columns and rows on letter and legal. I had to modify two special printer define files. I am glad to print exact layout to the HP printer without contact any vendor or Oracle. Also I dropped my special files to Window NT shared disk area and Later I am only person to run Oracle Report 2.5 output at my personal computer. Therefore you must work very hard to test, test, test and understand PCL language script for your need or this page size than standard letter or legal. Sam -
Setting Page size in crystal report
Hi,
I have designed a report for cheque. I have set the page size as 3 inches breadh and 8 inches length. When I preview the report crystal report designer it is showing as per the dimension i mentioned above. But when I open the report in my application it is showing in the A4 size. My application is developed in java. Please help me to display this report in my application as per the page size I mentioned.HttpServletRequest request = (HttpServletRequest) pageContext.getRequest();
HttpServletResponse response = (HttpServletResponse) pageContext.getResponse();
CrystalReportViewer viewer = new CrystalReportViewer();
viewer.setOwnPage(true);
viewer.setOwnForm(true);
viewer.setHasExportButton(true);
viewer.setHasLogo(false);
viewer.setDisplayGroupTree(this.isGroupRpt());
viewer.setHasToggleGroupTreeButton(this.isGroupRpt());
viewer.setPrintMode(CrPrintMode.ACTIVEX);
viewer.setEnableLogonPrompt(false);
ReportViewerResponse reportResponse =
(ReportViewerResponse) request.getSession().getAttribute(
ReportServerConstants.REPORT_RESPONSE);
if (reportResponse != null)
viewer.setReportSource(reportResponse.getReportSource());
viewer.processHttpRequest(request, response, pageContext.getServletContext(), null); -
8x6 page size in crystal reports
Hi All,
I have created 8x6 page size for printing of voucher in crystal reports. While taking print when I select this size it takes as landscape. When I change it to portrait it changes size as 6x8.
Is there any solution for this?
Thanks & Regards,
SheetalOh dear I fear you are having the same problem I have which is if you create a report where the vertical dimensions are greater than the horizontal dimensions it switches it automatically to landscape.
Sadly I have not found a solution yet as you can read in my post Printing Problem
Hopefully somebody can help us both out.
Maybe you are looking for
-
When turns on now it goes to choose language page and is just like a brand new ipod except I have no way of being able to put music on as I always get told to restore which doesnt solve problem
-
Mac Book Pro won't see my iTunes Library on an external drive
I have a brand new Mac Book Pro and my iTunes Library is on an external drive. My computer won't see this Library even if I change the location under Preferences. All I can see are my purchases from the iTunes Store on my iCloud. I don't want to c
-
Bit of an odd one that had me scratching my head. I have a development system consisting of a PC running a 7842R, acquiring analogue and digital data from the FPGA, loading it into a shared variable, and reading it out within a timed loop on the host
-
Reg logic required for selection-screen.
Hi, i have one requirement on selection screen 2 radio button 1 for service 2 for account Parameter FILE LOCALFILE Filename If the radiobutton ACCOUNT is selected the default name for file will be: Rev_acc_com_&system_time_stamp&.d
-
How to edit menu down arrows?
In my horizontal menu navigation bar, the down arrows are too far from text. How to edit?