Report Painter - adding columns with any texts.....

Hello !
Whether probably in Report Painter to create additional columns (adhered to columns of data) and to write there manually demanded texts for lines ?

Hello - I don't see Insert Diving Line after I click Insert Blank Line.
Where is that?
If I insert a blank line and then double click on the blank line to add a line like the following: "__________" for sub totals, etc, I can't. I can only add another characteristic or formula in the blank line.
Please help and thanks for your help!

Similar Messages

Is it possible to add new columns with format "Text" once a table is linked to a form

Is it possible to add new columns with format "Text" once a table is linked to a form in Numbers for iPhone or is it impossible and thus a serious bug?(Rating stars and numeric vales seem to work.)
Those bugs happen both for new speadsheets as well as existing onces, like the demo. When you are in the form only the numeric keyboard shows up.
Pat from the Apple Store Rosenstrasse/Germany approved that it looks like a Bug during the Numbers Workshop I was in: It is not possible to add new columns with format "Text". I reported the error for Version 1.4 but there is no update nor do I get statement of understanding the issue.

Hi Knochenhort,
I see what you are talking about now. Without knowing how the program actually works, I think this is what's going on:
When you add a new column to an already existing table (with already existing formats), the new cells come already formatted like the previous column. So when you add a column to the end of the demo table, the cells are already formatted like stars, and when you add a column to the beginning, they're already formatted like number.
I think this is why it's different when if you add columns to a table with blank (unformatted) columns. In that case, the new cells aren't already "tainted" with a set format, so you can change to text format without issue.
It seems like the problem is that you can't format cells that are already formatted as "number" as "text" format (even if it doesn't look like they are, because they are blank). IMO, this is a bug! This is why you don't see this issue when adding columns to a new table, because the new cells don't already come with a format.
To workaround, you can highlight the body cells after adding the new column, and delete the cells. This will "clear" the formatting, so you can then go in the inspector, format them as text, and the correct keyboard will pop up.
Hope that helps!

Report Painter: Change descriptions with *

Hi
I have a doubt: In the Report Painter >> the fields with * Color Blue. Is possible to change the description or is Standard ??
Merry christmas

Please search for available information before posting, do not post basic questions.
Thread locked.
Thomas

HT1222 I updated my iphone 4 with ios 7.1.1 and now there is no sound with any text, any mail, application updates, no vibre call sound....its just vibrate i checked all settings plz help

I updated my iphone 4 with ios 7.1.1 and now there is no sound with any text, any mail, application updates, no vibre call sound....its just vibrate i checked all settings plz help

i have the same problem.and i found out, if my iphone vibrates,there is a new message, but its not shown.
if i restart my iphone after these vibrations, the new messages appear.very strange.
i hope Apple will fix this problem soon.

Report painter - Choosing column heading text

Hi SDN
I'm having a specific problem with getting the right column heading text into my G/L report painter report created in FGI2/FGI5. In the report painter form I have created the three texts for my column (short, medium and long text). In order for the heading to be meaningful I need the report to show the medium or long text. This is also the case when I run the report as object type Object list. Here the medium text is displayed. However, when I run the report as a Classic drilldown report or a Graphical report output the short column heading text is shown.
Now, I know from running the standard report 0SAPBLNCE-01 in FGI0 that it is possible to have the long column header text shown in the report, so I'm not willing to give up. But can any of you guys help me on how to make the report show the correct text?
Kind rgds
Steen Koefoed

Hi Anna and thanks for your suggestion. I have tried changing the header text length in the form as you suggested, but it does not seem to affect the display in neither of the three output types of the report. I assume that there must be a way to control the text header length specifically for each of the three output types. But how....

Report Painter - Dynamic Columns

Dear Expert,
I'm preparing a report painter report with cost centers as columns.
Is there anyway I can use cost center group as variable and then the no. of columns and column texts are populated based on the no. of cost centers and cost center names exist in that cost center group?
Thanks in advance and regards,
Junior

Hi
To define anything as variable, you should have the details like - TABLE / STRUCTURE details.
But, for any groups ( Cost element group / Cost center group) - no table / structure available
VVR

Report Painter - New Columns Don't Show Up

Hello All,
We have a report painter report that was copied from an existing report in transaction CJE5 (for modifying the form) and then assigned in CJE1 (to a report). The copied report was functioning properly with an existing tcode assignment. Now, I am trying to add new columns to the same form and I was able to add and save everything to the form without errors. However, when I execute the report, these new columns don't appear on the report. Can anyone suggest why?
One thing I notice was that when I went to the "Report Parameters", the list of "Columns" does not include the columns that I added. I cannot figure out how to add them to the list so that they would start appearing on the report output.

Hello Suresh, Thanks for the suggestion, but report painter is a functional area and the ABAPer should not be required to insert a new column and make it appear on the report. Any more suggestions, please?

How to order an entire Report by a column with in a group...

Okay, I have a Group Above report, and I want to order the groupings by a column within the group. I am using a lexical parameter in place of the entire ORDER BY statement in the query, giving the user the capability to sort the report by any specific column, at runtime.
So, basically, this parameter allows for the ORDER BY to be dynamic; however, in the Data Model, I am required to designate at least one hard-coded break column, which overrides whatever column is designated by the user at runtime.
Any ideas how I can get around this?

Hi Brice,
If you want just i single hard coded column in a group
then i think you can create summary column with counting
so you can say say a column that gives you just Serial no.
and rest of the thing as it is.
in this way you got your hard column and also Order by facility
that you want.
Hope that helps you.
Enjoy Oracle....

Report Painter - Adding Total lines on Report

Hello -
My client wants to add a single line above all of his sub-totals and a double-line above his grand total.
I can't find where to do that.
I think if I were to use report writer and row blocks, I could do it, but not sure about report painter.
Any help would be appreciated.
Regards,
Natalie

Hello - I don't see Insert Diving Line after I click Insert Blank Line.
Where is that?
If I insert a blank line and then double click on the blank line to add a line like the following: "__________" for sub totals, etc, I can't. I can only add another characteristic or formula in the blank line.
Please help and thanks for your help!

Report painter adding details KOB2 and KOB1

How can I add the details of KOB2 (reference document number (refbn) and planned value in report currency (orgwtr) and the details of KOB1 in a report painter report?

Hi,
KOB1/KOB2 are line items reports. Report painter, however, deals only with totals tables. Therefore, you cannot build a report with Report Painter tool putting their details of single document.
Regards,
Eli

Report Painter - Invisible Column

Hello All -
I am creating a report painter report using internal order table.
When I execute the report, I am seeing a column that I don't see when I am editing the configuration of the report.
I have looked to see if the column resides on a different Section, Horizontal Page, or is Hidden.
I don't see multiple Sections or Horizontal Pages and nothing seems hidden.
Am I missing something?
Thanks!
Emmas

Hi,
Check if parameter 'Suppress zero columns' was selected in report layout.
Menu Formatting -> Report Layout.
Regards
Sam

Report Painter Adding Characteristic

Hi,
I like to pull real estate (RE) object (property, business entity, contact) to report in Report Painter reporting.
For existing library, there are no such characteristics available. Hence, i create a new library from table CCSS and tried to add the related characteristic to it. Why i can see the fields (eg. SGRNR, OBJNR_IG ..) available in CCSS but cannot see it in GR23 and insert it to my selection ? How to add additional characteristic beside select from the standard given fields ?
Or anyone can tell me which library available with RE information ?
Thank.
Regards,
Oscar

no help..

Report Painter Library: troubles with new field in the additional structure

Hi, ALL!
I'm creating a new field in the Report Painter table GLFUNCT. Do do it I created my field in the additional structure GLDBZ for GLFUNCT and create an row in the T804C table for new field.
Who has expirience in customizing using T804* tables? What tables should be used and how? I have the following troubles:
- I do not see the new field as characteristic in the library - I don't know the customizing table to set fields from additional structure as characteristic
- in the generated Report Painter program my new field exists but call of filler routine is always disabled
Thanks
Tatiana

Hi Shabitha,
just wondering if you ever found an answer to this, as i'm searching for info on same matter.
Thanks, Regards,
Okan Yarligan

Report painter, lead column doesn't display the key, only description is di

Hi Gurus,
I am facing a problem as the report painter report only shows the description for the objnr (charasterstic) and not the key and description thoughin the format key and description is set. Kindly suggest me the how to overcome this problem.
Example of the problem-
The problem is that the report displays the descriptions (like u201CRéseauAiru201D on the first line) and not the code (E100/002831/EP-AIR) that we wish in the lead clolumn.
Regards,
Sachin

Hi
Once you execute the report and the output is displayed....
Go to Settings > Char Display > Choose "Key and Description"
Then Choose menu Report > Save Definition
BR,Ajay M

Adding an image from the web to the report in the header with other Text

I am attempting to fix a Crystal Report where I have a Logo positioned in the upper left corner of the Report Header. The Report Header also includes 2 text fields. One is fixed data and the other is a date. I have mastered the img src but I cannot get the two text fields to display to the right of the image. They will always push to the line below. I have tried putting them in different sections and underlying the next section, and all other settings that I can think of. What I must have would be similar to this:
| . "UPDATE"
Image
| . "DATE"
I have even tried suppressing all headers and using multiple detail sections to no avail. I am using Crystal Reports 2008

I have found the answer or should I say the cause of my problem. It is that Microsoft in their infinite wisdom have changed the way (or engine) their Outlook (post version 2003) handles html. They now use the "engine" from their 'Word' program which cannot handle most compound formatting. To handle this program, you have to build it all on one level. To solve my Header problem, I was forced to recreate my graphic to include the Header text, place that graphic on the top of the page and build my form below, an entire line at a time. Multiple objects on the same line would look great in Outlook prior to '2007' but may be in any order or grouping in '2007' and after See this explanation...
[http://blogs.sitepoint.com/2007/01/10/microsoft-breaks-html-email-rendering-in-outlook/]

Report Painter - adding columns with any texts.....

Similar Messages

Maybe you are looking for