Report painter Cash flow issue after the upgrade.

Hi
We have developed a Cash Flow statement through report painter report. This has been used for quite some time. However, after the ECC6 upgrade, the report is out by a clearing A/c amount which has a zero balance. I canu2019t find how its picking this.
Any suggestions?
Thanks

In addition to applying that note, you also must deactivate Lightspeed rendering. To me that's too extreme of a thing to do just to get paginators. You loose the huge rendering performance improvements and it also means you can't use any of the new UI elements from 7.01.

Similar Messages

Authroization issue after the Upgrade for Multiprovider

Hello Experts,
After the upgrade has carried out in my Quality system, I'm unable to execute a query because of the authorization issue with Multiprovider. But earlier the same Authorization was assigned to the ID.
The Role in Q and the Role in P is same. Right now P is with 3.1 and Q is with BI7.
In both the system I have the same Role. But in Q it says that: Error You have no Authorization for Multiprovider XXXX
This is happening for only one Multiprovider in Quality system. There is no change in the Multiprovider from earlier structure to the present structure.
Can anyone give me any idea as to how to solve this issue?
Many thanks in Advance..
Thanks
Raman..

Hi,
Look at this link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a07122ae-8216-2a10-c9a5-996717a0648b
Hope it helps

WD ALV Issue after the upgrade

Hi,
We have upgraded the SAP ECC 6.0 systems basis component SAP BASIS 700 from support pack 10 to 20.
After the upgrade webdynpro ABAP ALV table rows are not getting selected when we click on the rows, But it is getting selected when we we use CNTRL+Click.
I would really appreciate if you can provide me a note or route cause for this issue.
Thanks
Basava

Hi Jawahar,
Below is my suggestion regarding your query:
Edit existing Job server and update the details regarding Local reporsitory and save it.
Now try to map the same job server in scheduled jobs and check it was working or not
Or Else
Create new Job server and assign it to local repository.
In this case you have to update your all real time & batch Job configuration.
Thanks,
Daya

Slimer qt fonts & wierd encoding issues after the upgrade to qt 4.5

After the upgrade to qt 4.5, all qt apps have really slim fonts http://i42.tinypic.com/2ln8x10.png
here on an older screenshot http://i42.tinypic.com/2chmbnn.png.
Also there are some glitches with the encoding http://i43.tinypic.com/16ke3o6.png, after i press something it fixes itself http://i44.tinypic.com/2ds302d.png
Last edited by Maki (2009-03-15 11:26:55)

About the slim fonts... this is actually a fix with qt4.5. Old qt didnt respect some system font settings so now that it does, tweak ~/.fonts.conf how you want it.
And about glitches... there will be some minor problems untill kdemod rebuilds against the new qt, you can rebuild workspace yourself if you dont want to wait for them.

Report Painter: Cash Flow Actual/Plan Report on Profit Center

I must create a Cash Flow report Actual/Plan/Variance Figures per Profit Center by using a report painter.
It will be created in monthly basis format, and year-to-date format (two different formats).
The format is in GL accounts instead of standard Cash In and Cash Out format.
I need to extract the Plan figures. However, we don't have planning on PCA. We are only doing plan on cost center, either revenue or cost (revenue is created as cost element category costs/reducing tax).
Should I extract it from the Cost Center Plan & add up all plan amounts of the cost centers that attached to the specific profit center? How can I do that?
What do you suggest as the best solution? Please explain briefly and using what t-code, tables and fields to extract from.
Thanks,
-=Meila.S=-

Hi John,
Go to Menu - > Edit -> Variation
You can set the order of the Selection Screen fields there.
Hope this helps you
Regards
Andrew

Schedule jobs issue after the upgrade

We have Data Services jobs scheduled via management console in 4.0 Environment. I upgraded the repository to 4.2 and attach it in CMC and also in Server manager. Both the environments are in different servers.
Login to Data Services management console. Click on the upgraded repository schedules, scheduled jobs listed there. But there is no Job server atatched to it. When i try to activate or edit the schedule, i am getting below error.
Schedule:billing_rep Error:Socket is closed] When contacting the server above exception was encountered, so it will be assumed the schedule is not active anymore.
Am i missing any steps?

Hi Jawahar,
Below is my suggestion regarding your query:
Edit existing Job server and update the details regarding Local reporsitory and save it.
Now try to map the same job server in scheduled jobs and check it was working or not
Or Else
Create new Job server and assign it to local repository.
In this case you have to update your all real time & batch Job configuration.
Thanks,
Daya

Authorization issue after the Support packs upgrade

We're having problem on authorization issue after the SP upgrade.
One issue if "You are not authorized to call up line item display" using FCH1 and FS10N tcodes.
And the SU53 showing problem on S_TCODE FAGLL03.
How are we going to solve this issue? We dont want to add this missing auth object on all our finance roles.
Thank you in advance.

How can i send you the trace file? What is your email address?
If I were you, I won't do that. Did you not ever sign some confidentiality agreement? I wonder.
Anyhoo... (copy right @ David)
What are the objects been caught in category RC=4, RC=12?
Relate them with functional aspect of the transaction (error screen)
Edited : You can paste RC=4, RC=12 objects here without customer specific value if you want to.
Regards,
Arpan Paik
Edited by: P Arpan on Aug 23, 2011 2:36 PM

Xl Reporter does not work after the upgrade to 2007A PL 47

Hi Experts
UPgraded to 2007A PL 47 from 2005A. Upgrade was done successfully. However the XL reporter is
not functioning. When you go to Tools and click on XL reporter nothing happens. No error message
comes up even.
Client is using SQL 2005 MS server 2003
I ahve done the test upgarde in an image of the live server
thank you
Regards
Aosara
Edited by: Apsara Senaratna on Feb 10, 2010 4:33 AM

Hi Thannga
The answer is no.
I believe when i logon to SAP add on at the bottom of the menu it should come up " connecting Addon: XL reporter" (i get this on other dB's when connecting to SAP)
Could this be related to the environment. As other than this there was no issues with the Upgrade.
Thank you
Regards
Apsara

My outgoing mail is not working after the upgrade OS to mavericks. my mail client version is 7.1 . please help me resolve this issue

My outgoing mail is not working after the upgrade OS to the mavericks. my mail client version is 7.1 . please help me out resolve this issue

Please let me know , How we can reinstall apple mail ? .
1 . We updated OS to mavericks few machine in last december and still does't works SMTP (Out going mail) on those MAC.
2. After that most recently we updated OS to mavericks few machine those are working will with SMTP server .
a)Not showing any SMTP connection in TCP trace ,
b) Connection docter every time Says "Connecting to the server "
3, Then we have installed thunderberd (another mail) client on maverick os, which OS related to apple mail client not woking . It seems other mail client is working well with SMTP server .
Please help me .
Thanks,
Ranesh..

SAP Reporting on Cash flow statement

Hi all,
in SAP, how can we configure / set up Cash flow statement report, especially for China? How?
Thanks in advance.

Hi Suma,
No, you dont need to have cash management active in your system to get cash flow and funds flow statements.
Cash flow report defenition / design would depends on company to company.
Please go thru the below link to understand basic concept.
[Cash Flow Statement Example|https://www.zionsbank.com/pdfs/biz_resources_book-4.pdf]
Hope you must be fully aware of the above concept.
You can design your own cash flow statement using the financial statement items of your balance sheet in report painter/writer itself.
But you may need to fully acquainted with the report painter tool first.
Regardz,
Srinu

SAP Query selection screen issues after ECC upgrade

Hi all
We have a custom query created and assigned to a custom transaction code, which after upgrade to ECC 6.0 we find that the selection screen layout is different from what was available in 4.6C system.
All the fields required are available.
However, the sequence of the fields on the screen is different from the 4.6C after the upgrade.
Can anyone help identify the issue so that the issue can be resolved?
Thanks
Vinodh S

Hi N_niki
There is no resolution as such.
We had raised a Customer message with SAP and were informed that this was expected as the procedure to execute the reports was changed in ECC when compared to 4.6 (technical changes) and hence this issue shall remain for some queries wherein the old changes need to be brought back using an option in the SAP Query.
Please refer to SAP Note # 723577 which could provide a better explanation for the issue.
Hope this helps.
Thanks
Vinodh Sudhakaran

Web dynpro ABAP- small issue after EHC1 upgrade

Hi All,
We have a Web dynpro ABAP report and it was working fine before the EHC1 upgrade. After the upgrade we noticed that the row count in ALV greed was disappeared.
The report used to show 25 records per page and we were able to jump to the other pages by clicking on row count that was placed right below the report. Now report shows all the records and we only have scroll down option.
Any idea where to look/ how to fix this issue?
Regards,
Mike

In addition to applying that note, you also must deactivate Lightspeed rendering. To me that's too extreme of a thing to do just to get paginators. You loose the huge rendering performance improvements and it also means you can't use any of the new UI elements from 7.01.

Really big issue after last upgrade

After invoking
pacman -Syu
this morning something really strange happened : it upgraded my kernel headers and docs to kernel 2.6.35.7, but did nothing to the kernel itself. After the install of all packages, I went to the '/boot' directory and it was empty except for the 'grub' sub-directory. Since the kernel was still loaded in memory, it was only a matter of doing
pacman -S kernel26
and it installed the kernel and initramfs image. All this happened while I rebooted in console mode to uninstall gtk/gnome completely and install kde.
After that I went to check my system configuration file 'rc.conf' and guess what, it was missing too and after that I noticed that 'inittab' had also been deleted. Luckly I edited both files with vim which made backups in 'rc.conf~' and 'inittab~' respectively, so it was easy to restore both. After having a quick look at etc I decided to reboot the system(default runlevel was changed back to 5 so I could boot kde directly) but something was strange after reboot(I expected that) : nouveau framebuffer driver did not load and I never entered KDM, getting a terminal login instead. Also noticed that the PS1 variable was not set. After trying to edit my configuration files I kept getting that this was a read only file system and could do nothing until I booted with an old ubuntu livecd. After checking on 'inittab' again I noticed the following files were missing(sadly, I never edited them):
- /etc/rc.sysinit
- /etc/rc.single
- /etc/rc.multi
- /etc/rc.shutdown
Has anyone experienced this 'accident' before? If so, do you have any clue how I might recover those files? I would rather not reinstall the system.
Thanks in advance.

jonathan183 wrote:
thiago wrote:
After checking on 'inittab' again I noticed the following files were missing(sadly, I never edited them):
- /etc/rc.sysinit
- /etc/rc.single
- /etc/rc.multi
- /etc/rc.shutdown
Has anyone experienced this 'accident' before? If so, do you have any clue how I might recover those files? I would rather not reinstall the system
pacman -Qo /etc/rc.sysinit reports owned by package initscripts ... which you could re-install ... might be worth reviewing logs and see if you can figure out whats going on first though ...
Thanks, after manually installing the 'initscripts' package in '/var/cache/pacman/pkg', my system was restored. As for what happened, I believe it was some bug with pacman, as the 'initscripts' package was uninstalled after the system upgrade. That package was part of the 'base' meta package which was upgraded as a whole. After the restore I issued :
pacman -Sf initscripts
to have the package 'officially installed'.
As I stated, 'initscripts' was not the only package uninstalled after the system upgrade, kernel26 was lost too(but kernel26-docs and kernel26-headers were upgraded successfully). After the restore I tried to start kde with 'startx' and got a message stating that '/usr/bin/X' could not be found/executed. That was solved by reinstalling the 'xorg' meta package, but I believe some package of the 'xorg' group was also uninstalled after the upgrade.

Itunes just won't start after the upgrade

I've upgraded my itunes, and done all the double checks I've found on this site. My itunes just will not start after the upgrade. It's frustrating to say the least because I can't even access my libary or edit my ipod. I've tried everything including uninstalling and reinstalling.. please help! I wanted to put my audio books on my ipod for a roadtrip tomorrow!

Thanks Katrina. I was able to find what I needed through the link that you provided.
To those that are having this problem, here's what I did to fix this issue:
+If I have a computer or device that does not work well with an AWD with the latest update, how can I install previous (earlier) versions of firmware?+
+1. Open AirPort Utility.+
+2. From the AirPort Utility menu, hold the Option key *(Control key in Windows XP and Vista)* and choose Check for Updates....+
+3. Select the specific firmware version you require.+
+4. Click Download.+
+5. Select your base station and choose Manual Setup from the Base Station menu, or double-click on the AWD icon.+
+6. Choose Base Station > Upload Firmware.+
+7. Select a firmware version and click OK.+
+An important note about installing firmware+
+After you have successfully installed a firmware update, AirPort Utility will wait for the AWD to restart. Once the AWD is available, AirPort Utility will display the standard configuration setup window with the Manual Setup and Continue buttons. Unless you intentionally wish to change some configuration of one of your apple Wireless Devices, you do not need to click Continue. At this point, simply quit AirPort Utility. Your AWD should be functioning correctly.+
http://support.apple.com/kb/HT1218
I chose firmware: Airport Extreme with 8-2.11n (Fast Ethernet) 7.3.2 Be patient, as Airport Utility will report that it can't find the AEBS, but after a short while mine was back. I did not roll back my version of Airport Utility.
All appears to be normal and the iTunes library is rebuilding as I type this. Hopefully, Apple will figure out what's causing the problem with firmware 7.4.1

Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

@ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
@ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!)
@ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack. i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot.
Thanks fo rall yor help!

Report painter Cash flow issue after the upgrade.

Similar Messages

Maybe you are looking for