Report painter: CCSS: will pick up statistical posting?
Hello Gents,
will a painter sitting on CCSS table will pick statistical postings?
(statistical as when journal entries are made with cost element type 11, posted on cost centers)
Thanks for your help
KR - Loï
HI Waman
That is correct, the Cost Element Category 11 belongs to Revenue Posting & Value type 11 is belongs to Stastical posting in the tables.
HI loic moisan
Yes it wll pick the Valuatin Type 11 postings until unless you put restrictions.
Regards
Raj
Similar Messages
-
Hello Everyone!
Is it possible to create a report showing the balances by period for Cost Element and Cost Center. I would like to be able to show 12 periods at the same time. Something along the lines of the diagram below.
CE CC Period 1 Period 2 ... Period 12
CE1 CC1 50.00 45.00 100.00
CC1 100.00 110.00 200.00
CE2 CC1 150.00 100.00 250.00
CC2 130.00 100.00 400.00
CC3 100.00 100.00 150.00
Thanks!U can use standard transaction KSB1 for this.
Otherwise you can develop ur own report after selecting data from COBK and COEP. ( or use the view COVP directly). The object number of COEP refers to the Cost centers ( itsobject number format is like KLControlling areaCost center).
Hope it helps. -
Statistical Posting seen in Vendor balance report
Hi,
I have posted a bank guarantee through statistical posting (F-55). As per my knowledge, statistical posting does not update GL.
Statistical Entry Passed:
Vendor A/c... Dr (Special GL - G)
TO BG cleaing
But when i take a report for Vendor report along with special GL, the statistical posting is also considered. How to take a report for the same.
I know one option through dynamic selection in FBL1N.
What is TCode if i want Vendor Balance Report without statistical posting directly.select the noted items check box at the time of report execution, if u want to see the only splecial gl -G, give the G in spl. gl field at dynamic selection
-
Hi All,
KSB1 report is picking up statistical posting made to a cost center there by showing the postings made are real but the actual posting is only statistical in nature.
Please advice how this can be corrected? Suitable answers will be highly appreciated. Thanks
Regards,
VinayHi Vinay,
The statistical postings on cost center are characterised by the value type of 11 (in COSP table).
An actual CO posting has value type 04.
Thus in KSB1, change the layout.
Set filter on the value type.
In case you need only the actual values, filter out value type 11.
No other change in KSB1 is reqd.
Hope this answers.
Regards,
Nisha -
Report Painter not showing totals for some cells
Hi,
We're developing a report painter that will give us a total of all the columns. This total uses a set of variables and a set which essentially is a grouping of the profit centers. The problem is it is not showing any value on the cell. Despite the individual accounts having some values.
Any ideas where could this gone wrong ? the set exist with the correct accounts.
I.e.
A1 A2 TOTAL (A1 + A2 - defined in set)
Depreciation 100 100 200 [ but this shows blank]how did you solve this problem,my financial statement is not reflecting total posted depreciation even though it is reflecting the depreciation in the indididual G/L accounts.
-
Regarding Sap Report Painter Tutorials
Hi All,
I donot know whether it is right Forum
to Post message. Sorry if I am wrong.
Can anyone tell me some Link for good tutorial of Report Painter,
As I have to work on that.
Also I am beginner in Report painter
Regards,
Rishi BhatiaHi All,
I am very much thankful to all for helping me.
Yes the report painter notes are really good.
But now only I knew that I have to work in Report Writer also more but less in Report painter.
So please any of you can guide me for tutorials of report Painter,
I will be more than happy for that.
Regards,
Rishi Bhatia -
Adding variable in Report painter
Hi Gurus,
I am creating a new report using Report painter. Though, it is working fine, I want to bring one of the field for selection. How to add variable ? I created a variable but I am trying to insert this variable in the report painter... I am unable to find any way.
Awaiting your help.
thanks in advance.Hi,
Go to Global Parameters Definitaion in report painter, variable will be used only along with the field, just in global paramerters enter your desired field and click in next column, system will show you a pop up select your variable for that field...
now its just done run the report and test it!
If you still not make it refer to standard report of such kind, you will surely get it....
Regards,
Sayujya -
Adding field in Report Painter
Hello Gurus,
I am working in the Report Painter PR20-001.
My requirement is to add a new column in the output of the report but even when i am able to add a new field and save it on the reports execution i am unable to view the added field in the output.
Kindly tell me the entire procedure to add a new field in the output of the respective report painter output.
Regards,
Swati.Hi,
Go to Global Parameters Definitaion in report painter, variable will be used only along with the field, just in global paramerters enter your desired field and click in next column, system will show you a pop up select your variable for that field...
now its just done run the report and test it!
If you still not make it refer to standard report of such kind, you will surely get it....
Regards,
Sayujya -
Statistical Posting for PS settlement in Funds Management ECC 6.0
Hi people
Previously in 4.6C, WBS settlement (CJ88) will result in statistical posting in Funds Mgmt.
But now after upgrade to ECC 6.0, it is now considered as actual posting.
I know there is setting under FMCIA where you can set certain commitment item to be a statistical commitment item but we don't want to do that since the commitment is being used for other situation where we do want it to be an actual posting.
Anybody know how to solve this.
thank you very much
irwanHi,
You can manage it easily via FMDERIVE functionalities. Define a rule, where depending on busniess transaction (KOAO), the derived commitment item will be a statistical one (the other one, from what you use for regular postings).
Regards,
Eli -
Report Painter with Statistical Posting
Hi,
I am using report painter for P&L reporting. This report is reporting both value type 4 & 11 (actual and statistical posting) value. Some transaction are tied with Internerl order and posted as statistical posting and stop there.
But for some transaction with Real estate key (business entity and property), the transactions are posted to statistical and later will post again to actual posting from RE CO settlement of the property (reduce from property to cost center).
In this case, i have some transaction from statistical (IO related) but some having repeated on both statistical and actual (RE posting and settlement). This caused my report to be double reporting on RE related transactions.
Can anyone tell me how to segregrate this two type of transactions so that my P&L can report correctly.
Thanks.I didn't understand your question...
-
In report painter GRR3 1VK Actual Value picked up from previous year
Dear Experts,
In report painter GRR3 > 1VK
1. Column of Actual Quantity to take in Basic Key Figure from Statistical Quantity
2. The value is 4 (Actual) and Version is 0
I found that the Actual value appeared are actually taken from the previous fiscal year. I have checked the line items and their document posting date it shown as last fiscal year.
In this case, where should I amend to have the report pick up only actual value of this fiscal year? or Is there any value to maintain for GRR3 to pickup the current fiscal year actual posting?
Thank you very much and Best Regards,
Annehi..
Goto GRR3 > click on Lib 1VK it will show you all the report in 1VK library > select your report & double click on it
It will display the report format. Then go to Edit at the top. you will find General data selection.click on it you will find available characteristics. Then goto GRR2 for making any change/selection for Fiscal year char
If your report is a standard one you can not change. then copy the report from GRR1 and make the changes.
You can also see the char in GR23 by selecting 1VK lib.
kkumar
Edited by: kkbdsp on Mar 11, 2011 9:21 AM -
Report Painter - How to identity statistical orders in a Cost Center Report
Hello,
currently I am in the process of building a cost center report based on reporting tabel CCSS.
This report should list all primary and secondary costs which are charged to a specific cost center/cost center group .
The cost center or cost center group is given in the general data selection.
All direct primary cost postings are identified in rows like this:
- Cost Element (SET): cost element group A1, A2,...Axx
- Business Transaction Type: COIN
All primary cost postings deriving from (real) internal orders are identified like this:
- Cost Element: 1 to 9999999999
- Business Transaction: KOAO
- Partner object number: 0 to 99999999
Now here is the problem:
The controlling department requests to identify all primary cost postings to the given cost center which have been postet to a statistical internal order at the same time. The most part of the primary costs have been directly postet to the cost center in the Additioanal Account Assignments. But some have been posted to the cost center and at the same time to a statistical internal order.
Looking into BSEG I can quickly identify these line items as they have a value in BSEG-KOSTL and BSEG-AUFNR.
How can I select these items in a report painter report?
I would like to separate all items whith connection to statistical int. orders from those with no connection to internal ordes.
Thanks for your help!Dear Elli,
Dear SAP-Gurus,
once again, thank you for your quick reply.
You hints and remarks are very much appeciated.
My problem seems to be slightly more complicated than what I had expected.
All postings to the cost center/cost center group are actual postings. The cost center is the "real" cost element, there are no postings of value type 11 here.
Most postings have the cost center as the only cost element, but others additionally mention a statistical order.
My goal is to seperate those postings to the cost center [as (real) cost element] plus the statistical order from those with only the cost center.
I would also like to sort these postings by the order number.
I could easily write two reports:
One for the cost center and another one only for the statistical orders. The latter would use value type parameter 11 (as you proposed!). Unfortunately, I do not know all order numbers tied to the cost center. As table BSEG is not suitable for SAP Query, I run into deep problems here.
I know I have problem in the design of my report here and I would like to sort out, which options I have.
Is Report Painter a suitable tool for me here anyway?
Thanks again!
Karsten -
Report Painter - What is value type 10 Statistical Plan
One of my customers is running report 6o00-001 Orders: Actual / Plan / Variance. This report is displaying a plan value when, they say, no plan value has been entered. I have checked normal planning and this is correct - there is no plan value. However, when I check the report painter definition, the column in question will display value type 1 (Plan) and value type 10 (Statistical Plan).
Can anyone tell me:
- what is a statistical plan on an order?
- how can I remove the statistical plan value?
Many thanks in advance.Hi Szymon
Thanks for your answer.
But checking the correction constructions the code do reference to the operation RKP5 and the posting are being recording with operation RKP1.
I'm checking for a similar note but with this operation but I can't find it.
Do you know if it is something like that?
Regards
This is like the record looks in the table COSP.
Client
130
MANDT
130
Ledger
0
LEDNR
00
Object number
OR000000760636
OBJNR
OR000000760636
Fiscal Year
2014
GJAHR
2014
Value Type
10
WRTTP
10
Version
1
VERSN
001
Cost Element
56650101
KSTAR
0056650101
CO subkey
HRKFT
Business Transaction
RKP1
VRGNG
RKP1
Trading Partner
VBUND
Trading Part.BA
PARGB
Dr/Cr indicator
D
BEKNZ
S
Transaction Currency
BRL
TWAER
BRL
Period block
016
PERBL
016
Unit of Measure
MEINH
* modification to post revenues - Note 604092 if coeja-wrttp = '10' and uf-activ = 'RKP5'. elseif coeja-wrttp ge '01' and coeja-wrttp le '04'. else. continue. endif. * end modification to post revenues - Note 604092
Code in correction instruction.
* modification to post revenues - Note 604092 if coeja-wrttp = '10' and uf-activ = 'RKP5'. elseif coeja-wrttp ge '01' and coeja-wrttp le '04'. else. continue. endif. * end modification to post revenues - Note 604092 -
New Characteristic in Report Painter using table CCSS
Dear all,
Can someone help me add characteristic "Original Business Transaction" COBK-ORGVG into a report painter report that is using table CCSS.
Any help would be appreciated and points will be assigned.
Kind regards to all.
Orestis ChaitasI am designing the P&L report and I want to split my R&D expenses split down by Internal Orders. Since, I have not seen Internal order field in summary table of new GL..ie., FAGFLEXT table.
I want to know how this can be achieved in the same report in report painter.
I am talking this issue from Report Painter point of view where each report is based on library , which is defined per summary table.(ie., Library can refer to only one table....finding it odd to believe there is no join in reporting tool).....
Thanks and let me know if you want to know more on the issue I am facing. -
Display items which doesn't have any posting data in report painter
I made some reports by report painter. The problem is that when I run these reports, they can't display the items which doesn't have any posting data. But my customers want to display all items whatever it has been posted or not , can you give me the solution?
BTW, when I made Reports by using Drilldown report, it display all items
Thanks and best regards!In the change report screen in GRR2 go to menu
Formating--> report layout
There in the rows tab select the radio button, Print Zero rows
and in the columns tab select Print Zero columns radio button,
hope this should solve the problem
Thanks
Naveen
Maybe you are looking for
-
Creative Mediasource ID3 Tags - Edit more than one year at a ti
I use a 60gb Zen Xtra with Mediasource. I take pride in the ID3 tags of all my files especially those of my Jazz collection and my player is well organised. The only thing I have to ask is - is there any way of editing the year of, say, an entire alb
-
Can't log in with wireless router
I have successfully used my WRT54GS v.2 wireless router for a year of two. Tonight I am attempt to connect and cannot. I am using for username and admin for password, per Lynksis instructions (and what has worked in past). It apparently is not recogn
-
Hi I bought too many books at once through amazon for my iPad kindle. Havent read any of them and Two I haven't actually gone in to, they have a banner across front which says 'new'is there a way of reversing the transaction either with amazon kindl
-
Solution Needed for ODI function call
Hi Experts, I am using ODI 11g. Currently i am using oracle procedures to call a function in ODI . just like "Select package_name.function_name from dual " i am using this query in ODI variables.The output of the function i am using in ODI mails . So
-
Generate fields on the selection screen automatically
Hi, I'd like create some fields on my selection screen automatically using an information filled in the selection screen too. For instance : I enter a table name, and my selection screen is autommatically filled with all the primary key fields of thi