Report painter(cxr0) get data

report painter(cxr0)运行会得到相关的报表，如何在自己的测试程序里直接得到它运行出来的数据呢？ 注：submit export测试了下好像不行，用submit执行后的选择屏幕和标准cxr0里运行的报表的选择屏幕不同，而且用submit执行后出现一些莫名其妙的错误，和用标准cxr0里运行的报表完全不同，希望各位指点，谢谢，比较急。

是这样的，其实一般的报表可以不用去取report  painter的结果，只需要直接取数据库表即可，但有些report painter做出
来的报表逻辑较复杂，而且顾问考虑到其它各种各样的因素，如果直接去取表，逻辑将会很复杂，很麻烦，而且今后
对数是个问题，所以就决定直接去拿report painter生成的报表，请帮忙想想法，谢谢 。

Similar Messages

  • Report painter -output parameters,Data source,Extract parameter, report

    Hi expert,
    1)What report painter -output parameters,Data source,Extract parameter, report mean for and what are the difference?
    2)I have create new report painter and transport to  Test server using T-code:GCTR and I find that the T-code always point to old report. As I had check the SE93 the D_SREPOVARI-REPORT is point to report group.Why this happen?
    3) Does creation of new report or modification of the report always need to select the extraction option so that it will able to display the relected changes? Because, I have done modification on the report but it is not reflected the changes even i save until i have to create the extraction is able to display the report but every time i run the report need to select the extraction with option to choose new extract or old. Kindly advice how to save and create the report painter and save will display reflected result .
    Please help

    Hi BR Christian,
    Thank you for the prompt reply.
    I have few querys as below:
    1)Do we every time create new report by copying the existing report painter need to select output parameter, data source and extract parameter in order to be able to display the new report?
    2)when modify existing report painter and save it do we need to select output parameter, data source and extract parameter in order to be able to display the modify report correctly?
    3) What are the different between right click copy the report inreport painter compare with create report painter with copy GRR1?
    4) What are the T-code for modify the report group?
    5) When I create a new report with the right click copy in GRR1 and modify the report painter column only and everything remain the same just the report name different why when execute the report it always appear in the selection screen with report button which have option button to select the 2 version  of report which one is the destination report that I copy from and one is the new report? How to set the report when execute will only display the new report only without need to select the option with just new report only?
    6)For transferring reports you can use GR37 (export) and GR38 (import) can be use to transport from one client to another client? What is difference between GR37 compare with  GCTR?
    7) If I use GR37 and GR38 it is mean no need to create the transport request which as usual we create transport se10?
    we can directly import to another client ussing GR38?
    8)When we create a new report with copy with the existing report with just modify the report colunm and the report name difference only what are the setting example: report,report group need to be selected to be include to export/transport to another client?
    9) What are the difference between library and report group?
    10) Can we set Se93 to execute only report not report group? How?
    11) when using GR37 to transport it is also include the report group,library and the particular report?
    12) Can I include the variable in the column header to display fiscal year which I have selected from the selection screen?
    How and which variable should i use?
    please help.
    many thanks
    Edited by: KH on Jun 18, 2011 6:52 AM
    Edited by: KH on Jun 18, 2011 6:55 AM
    Edited by: KH on Jun 18, 2011 7:06 AM

  • CUIC 9.1.1 Report scheduling issue - getting data only for current date

    Hi,
    CUIC : 9.1.1
    ICM: 9.0.3
    Description:We have CUIC publisher and Subscriber deployed in Cisco UCS C series server. When we schedule a report in Subscriber, we are getting data of current date even we schedule for old dates. Eg. If I schedule a report for yesterday, getting output as today's data. This is applicable for all the historical reports.
    There is no such issue in Publisher.
    Regards,
    Alag

    Try this...
    {TableName.DateField} < DateAdd("d", -2, CurrentDate)
    HTH,
    Jason

  • Report is not getting data from Remote cube thru Multi Provider

    Hi SAPians
    I ve strucked up with a Problem in The Reconciliation Report in BW3.5
    The Report was built on a Multi Provider, which was created on Basic and Remote Cubes .
    Both cubes have same Data Source and all the Objects were in Active version and found good.
    When I m executing the Report ,I m only getting the data from the Basic cube and no data is coming from Remote Cube.
    I ve checked the char " 0Infoprov " in Multi Provider and It was assigned with the both the cubes.
    What might be the problem
    Please help me in this regard
    Thanks in advance
    Regards
    Arjun

    Hi
    In the Reconciliation multiprovider, include 0INFOPROVIDER = Remote cube.
    If data still not coming, you can be sure connectivity with Source system of the Remote cube is the issue
    Check with basis to solve the connectivity issue.
    Ensure Remote cube is consistent
    Bye

  • In an alv report how to get data in next and previous pages.

    in my alv report i require the output such that
    when i will press the next button in the application tool bar the alv report will be displayed for the next inventory document number in the next page. like wise previous
    would anybody please help me out.
    thanks and regards
    papps

    In your servlet you could set the arraylist into the HttpRequest object so that it is visible in the JSP you are forwarding to.
    RegistrationDAO rdao=new RegistrationDAO();
    ArrayList arr1=rdao.getsearchresults(af);
    request.setAttribute("someArrayList",arr1);Then in the JSP you could use JSTL 1.1 and jsp:useBean tag to access the ArrayList like this
    <%@ page contentType="text/html;charset=UTF-8" language="java" %>
    <%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %>
    <jsp:useBean id="someArrayList" class="java.util.ArrayList" scope="request"/>
      <c:forEach var="currentRecord" items="${someArrayList}">
        Some property of the AddressForm object: ${currentRecord.propertyName} <br/>
        Another property of the AddessForm object : ${currentRecord.someOtherPropertyName} <br/>
        <hr/> 
      </c:forEach>I guess you are using struts, so instead of JSTL there might be some struts tags that do the same as above JSTL tags. You can research further on that.
    If you can't use struts tags or JSTL tags then you could write it with JSP scriptlets (highly discouraged option).

  • Attaching Variable to the Library for Report Painter for Cost center report

    Hi,
    I want to attach the Variable - "Cost element group" to the Library for Report Painter for getting Cost center report. The Cost center report should be cost element group wise with actaul, budget and variance. Please let me know the process.

    hi..
      I think you have to first define Attribute mis as "V" in Cost element master basic data tab for the elements you want to capture as varible.
      Then make a Cost element group / set in KAH1/GS01 and use it in your report.
      kkumar

  • Report painter,  Internal orders and profit center accounting

    hi,
    I want to do a report using data from internals orders (AUFNR) and profit center accounting (PRCTR).
    I can make individual reports for internals orders (6O1, CCSS) and for profit center accounting (8a2, GPLCA) but I can't combinate data from internals orders and profit center accounting.
    Is it possible make a report using report painter that show data of internals orders and profit center accounting.
    All my internals orders have a profit center accounting.
    Thanks in avanced

    [url] http://help.sap.com/saphelp_45b/helpdata/en/cc/36428394f311d2b47a006094b9b0a5/frameset.htm
    this may be helpful
    regards.
    santhosh reddy

  • Variable in report painter

    Hi,
    I have a customized variable in report painter which pulls data from standard table, profit centre (GLPCT).  The data is included dummy profit centre. 
    How can block or should not allow dummy profit centre data to flow to the report?
    Please advice.

    Hi,
    Easier option is to create a profit center group excluding the dummy profit center and assign it in the report painter instead of the variable.
    Other option is at the time of executing the report, exclude the dummy profit center with out making any changes in the report.
    Regards
    Sudhakar Reddy

  • Change Selection criteria for existing report in Report painter

    Hi Experts,
    We are on 4.7, using report painter for getting reports for Cost center & Profit Center. For one of the report we have selection criteria as Cost center and cost center group, but now user want us to add new selection field as Cost element and cost element Group to same report. We have tried all the options from GR32 ->Edit-> General Selection, but we don't find cost element in Key figure listed there.
    Please let us know how can we add the new field to selection criteria. We also would like to know is this is possible with existing report  to add new fields or not? Is that we need to create new report for this?
    Thanks in advance..
    Shilpa

    Shilpa-
    In my opinion the best way to troubleshoot issues like this is to go to SAP delivered standard reports and see how they are setup. For example, in your case you want to add cost element and cost element group to your report. There is one standard report from SAP - Transaction :S_ALR_87013611 which has both cost center, cost center group and cost element, cost element group in the selection criteria. You can look how this report is set up, and maintain your report in a similar fashion. Atleast this way, it will give you an idea.
    Go to transaction code GRR3 and under library look for report "1SIP-001". By double clicking on the row, you will see how it is maintained.
    Hope this helps.
    Shail

  • Finacial statement report Comparison with Previous year in report painter

    Hi Experts,
    I am new to report Painter.I developed financial statement report in report painter with following data:
    Table: FAGLFLEXT
    Rows:GL Account Hierarchy(defined Manually)
    General data selection: Ledger
    Column 1: CCode,record type,version,period,fiscalyear
    Column 2: Ccode,record type,version,period,fiscalyear
    I tried various variables for fiscal year in both columns but in general data selection two fiscal year fields appeared and in output  it is showing values according to only one fiscal year field in general data selection hence it is displaying values only in first columns and empty values in second column.
    I hardcoded fiscal year values in both columns but still fiscal year field is appearing in general data selection and value input to that fiscal year results in displaying values in first column and empty values in second column in output.Please let me know where i went wrong.
    Thanks&Regards,
    narasimha.

    Hi Narasimha,
    Can you please post your solution.
    Thanks,
    Srini

  • How to get data from crosstab or table?

    hi !
    i develop my app with bib 9.0.3.1 . To customize my report,i must get data from crosstab or table component (presentation bean) and generate defined XML file ,can you tell me how to do ?

    hi paul
    the sample code like this:
    try{
         DataAccess dataAccess = thinDataview.getModel().getDataAccess();
    int rowCount = dataAccess.getEdgeExtent(DataDirector.ROW_EDGE);
    int colCount = dataAccess.getEdgeExtent( DataDirector.COLUMN_EDGE );
         for ( int i=0; i<rowCount; i++ )
         for( int j=0; j<colCount; j++ )
                   String dataValue = dataAccess.getValue( i,j,DataMap.DATA_UNFORMATTED).toString();
    }catch( Exception e ){
    System.out.println( e.getMessage() );

  • How to get Data from B2 Cluster

    Hi
    I need to write a report which will get data from B2 Cluster.
    Please can anyone provide me with the code how to get to the cluster and read from ZL and PT
    Thanks in Advance

    Ok so far this is what I have done
    *& Report  ZAKTIME                                                     *
    REPORT  ZAKTIME                                 .
                   Dictionary tables/structures
    tables: pernr, pcl2, pcl1.
    include rpcxB200.
    infotypes: 0001.     "Org. Zuordnung
                          main logic
    TOP-OF-PAGE.
    START-OF-SELECTION.
            GET PERNR.
            RP-PROVIDE-FROM-LAST P0001 SPACE PNPBEGDA PNPENDDA.
    process the data according to the payroll area
       IF PERNR-WERKS EQ P0001-WERKS AND PERNR-BTRTL EQ P0001-BTRTL
          AND PERNR-KOSTL EQ P0001-KOSTL AND PERNR-BUKRS EQ P0001-BUKRS
          AND PERNR-ABKRS EQ P0001-ABKRS AND PERNR-KOKRS EQ P0001-KOKRS.
            PERFORM RETRIEVE_Time.
        ENDIF.
    END-OF-SELECTION.
    "======================================================================*
                           forms                                         *
    "======================================================================*
    FORM RETRIEVE_Time.
        B2-key-pernr = PERNR-PERNR.
        RP-IMP-C2-B2.                  "macro resides in table TRMAC
        IF rp-imp-b2-subrc = 0.
        ENDIF.
    ENDFORM.                            " RETRIEVE_PAYROLL
    Getting the following errors
    1. B2-Key_pernr is unknown
    2.Bezug is Unknown
    3. KNTAG is Unknown
    Notice number 2 and 3 is not even in my program....
    Also I was trying to pass the value to the parameter. why is this not working...

  • Get data from a Report Painter

    Hello.
    Does anyone know how to get data from a Report Painter?
    Thanks in advance!

    Hi
    check the links
    Report Writer functions can be accessed from within the Report Painter.
    The difference lies in the GUI of the report painter.
    For Report Painter
    http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/content.htm
    For Report Writer
    http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7dc143c211d182b30000e829fbfe/content.htm
    Refer the following links :
    http://www.virtuosollc.com/PDF/Get_Reporter.pdf
    http://sap.ittoolbox.com/groups/technical-functional/sap-r3-other/accessing-tables-using-report-painterwriter-98766
    http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_bw31/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
    Regards
    Anji

  • How to make smartform get data from report painter???

    hi all!
    please tell me how to get data from report painter?
    i has a report painter zabc ( create through t-code ke31).
    I want  get data from Zabc after run and show data by smartform.
    plz help me!
    thanks

    Hi ,
    Please check this link [SMARTFORM|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRSF/BCSRVSCRSF.pdf]
    Regards,
    Smart

  • Getting Error in Report painter

    Dear All ,
    i am getting an error after i execute a report in report painter,
    Getting the following errors,
    Characteristic Ledger does not exist
    Characteristic Record Type does not exist
    Characteristic Ledger does not exist
    Message no. GR655
    Diagnosis
    The characteristic must (message type E) or should (message type W) be addressed in the report definition. This means that a set must/should exist for the characteristic in the definition of the report rows, report columns, or report selection.
    For performance reasons, it is important that you limit the value ranges of those key fields located at the start of the database key as much as possible.
    Procedure
    Define a set for this characteristic in the report.
    Note
    In Controlling (Table CCSS), different characteristics (cost center, order, project, etc.) are portrayed internally with a common technical characteristic, "Object". In reports, either a specific characteristic such as cost center must be used, or the characteristic "Object" must be used directly. If this is not the case, an error message appears saying that the "Object" characteristic is missing.
    regards
    Man

    Hi,
    define a ledger / record type, (eg in the general data selection).
    Best regards, Christian

Maybe you are looking for