Report Painter Display Error

When executing a Cost Centre Z developed Report painter report, The values appearing blank on the face of the report but when drilling down to line item level i can see the value exists. This is not a access/security/authorization error as no crosses on the face of the report.
Please advice
M Khan

but the total lines are not adding to zero. in a another report painter report one of the lines value is not equal to line item total! it is quite a strange behaviour that i have never come accross! any clues?

Similar Messages

  • (Report Painter) Display differnet language in one report.

    Hi Experts,
      i want to know can (Report Painter) display differnet language in one report depends on different user login.
    like user with chinese lang login can display chinese in the report
    and
    user with english lang login can display english in the report?
    if so, please give me so intruction on how to define the description on the text.
    thanks

    may be my poor english make u guys misunderstand my question.
    actually i am talking the first Top row (which is lead column/ descrption column)
    and first Left column in a report painter.
    ====================    <---First top row
    =    <--- first left column
    =
    =
    =
    currently i am using  "change text" to type in description(english) by manual(), and the problem comes out when i login with other lang, say chinese lang for example, the column and row didn't display any text on it(all blank) after different lang login.
    so just wonder is there any way to have a auto translation when different lang login.

  • GR224  Report Painter: Internal error when converting a report

    Hi
    Using FAGL_RMIGR transaction I've trasferred report 8A3-0010 in a
    custom library ZXX. The migration happened without error messages. I've
    tryed then to run report FL3-0010 by GRR3 transaction but error message
    GR224 appears
    Report Painter: Internal error when converting a report
    Message no. GR224
    Diagnosis
    During the internal compilation of a Report Painter report to a
    Report Writer report, sets are generated. This caused an error in the
    subprogramm GENERATE_ROW_MULTI. The return code was 7.
    System Response
    The report could not be generated and/or saved.
    Procedure
    Please call the SAP Hotline and send them this longtext as well as
    detailed information describing the circumstances in which this
    error
    occured.
    Please could you help me?
    Thanks in advance
    Giovanna Scamardella

    HI,
    SAPNET notes search with GR 224 brings some old (but maybe helpful) notes: 37611, 193392,137231, pls. check.
    Best regards, Christian

  • Report Painter - Display two characteristics on one line in lead column

    I have a requirement to produce a Report Painter report to display values by Cost Centre and Cost Element.
    The requesting user wants to see the Cost Centre AND Cost Element keys displayed on each row of the report, to allow for manipulation in Excel.
    I have no problem grouping Cost Element within Cost Centre or vice-versa, but am not aware of any way of displaying both key values on each row in the lead column (or anywhere else).
    Has anybody done this?

    Hi Robin,
    the request is not unusual. However, report painter does not allow for two key columns or a key column combining two characteristics. You might consider using SAP Query (with table COEP or COSS/COSP for aggregates) if you do not want to resort to developing the report in ABAP.
    Regards
    Nikolas

  • Report painter:display of G/L with zero amount

    Hi,
    I have created a report in report painter for expenses by profit center. however the system is not showing the G/L for which no posting has been made although i have maintained those G/Ls in the report. Is there any way to display G/L with zero values also?
    I am running the report at fiscal year level.

    Hi, you can try to go the report painter (GRR2)
    Formatting - section layout - Columns make sure the suppress zero columns is unchecked
    and also you can go to Formatting - section layout - Columns  - Treatment of zero rows - Print Zero Rows
    Regards.

  • Report painter-syntax error form 'SEL-L023' already exists

    Hi,
    When i copy a report painter form and generate it to the same report group (same as source report) i get an error 'syntax error form 'SEL-L023' already exists. I saw the ABAP code the source and target have same form name.
    Where can i change the form name?
    Thanks

    I will closed this thread as I hv solved my problem already.thks

  • Report Painter - Library - Error in Transport

    Hi Dear experts,
    I have three reports built with report painter in the development system and these are associated with a z library. When we transported the objects, the Tcodes associated with these reports have been transportd properly. but the reports and the library is missing in the Production system. Now, if i execute these transactions from Production system, its giving runtime error, because the linked reports are missing ( report GP2D4I7Z2RKMI4QGRR05RUURZ8F100 load program not found) When i check the same report in development, its assigned to a local development class($tmp). But there are a lot of reports with such long names in the $tmp. So its very difficult to find which are the actual objects to be transported.
    Is there any easy way to find the reports and transport? And if they contains some includes, do i need to transport them also manually? Is there anything i can do with the library? I couldnt find the transaction to change the library. So how can i transport the library? We have only 3 reports. but i dont know how many other objects are linked with these reports.
    Any kind of help is highly appreciable
    Thanking you in Anticipation.
    Deepak

    Hi Raja,
    the menu "GR22->utilities->transport->transport request"  gives some options like Statndard layout, library, report , report group, key figure, etc. We have one Z library and one Z-report group. I dont know about the other itesm like key figure etc.So which options i have to select and run? ( Iam handling these things for the first time) or do i need to run it for each options?
    Could you please explain more...
    Thanks & Regards
    Deepak K

  • Report Painter: Display only own Libraries in GRR2

    I'm working with Report Painter and Key Users find it troublesome to explore all the library tree until they get their own library...
    Does anyone knows if it is possible in transactions GRR2 or GRR3 to hide the standard libraries???
    Thanks for you help!

    I have configured that one but it seems that in transaction GRR2 or GRR3 is checking other Authorization Group (G_803J_GJB = Report Writer: Report Group)
    I will configure both or I will raise an OSS Message with the incident.
    Thanks for the prompt response!

  • Report Painter - Internal error: Invalid offset in APPEND-C

    Hello everyone,
    We are having the next problem when we generate a new report and include it in a new report group and in a library that works with all the other reports,the next error arises:
    Internal error: Invalid offset in APPEND-C GR-211
    Anyone Knows something about it??
    Thanks,
    Raquel

    Hi Raquel
    in the report definition you use many characteristics in the general selection by using selection variables.                                                                               
    Kindly note that there is a restriction for characteristics in the general data selection - actually only the single values can be  
    transferred. All these characteristics for which you require 'All values' should be moved to the the rows instead the general data selection.                                                       
    Kind Regards
    davide

  • Report Painter - Display Report

    Dear Friends,
    While displaying/changing Z reports from GRR3 transaction, we are getting short dump.
    The dump does not occur for standard transactions.
    The error occuring is:
    The current application program detected a situation which really should not occur. Therefore, a termination with a short dump was triggered on purpose by the key word MESSAGE (type X).   
    Short text of error message:                            
    RAISE MKES1F12_READ_FPAGE_FCOLUMN       (internal error)
    Please let us know if anything further need to be done with the Z reports after creating them in GRR1.                                                       
    Advance Thanks
    Swapnil

    Hi Swapnil,
    Check this note
    Note 330457 - Drilldown report not executable
    Its related to the dump 'MKES1F12_READ_FPAGE_FCOLUMN' . Try applying the corrections in the Note.
    Regards,
    lakshman.

  • Formula Variables for Report Painter- Syntac error in formula, Please Help!

    Dear Experts,
    I'm creating the report where I need to calculate annualized P&L. The formula is as follows : (P&L account/Period(variable ))12*
    I need to capture the From_period, which is entered by the user on the selection screen when running the report and use it as a variable in the formula above. Example: If User insert From Period 3, then the formula should be *P&L accoun / 3 * 12*
    I have tried so many different way but nothing seems to work. one of the ways i tried was:
    In the general selection Im using set variable 6P-S-PERIOVB.CCSS for period which consists of variable V_PERIO and B_PERIO.
    So Im trying to create a folowing formula:
    IF 1 >= u2018PER_FRu2019 AND 1 <= u2018PER_TOu2019 THEN 1 ELSE 16
    IF 2 >= u2018PER_FRu2019 AND 2 <= u2018PER_TOu2019 THEN 1 ELSE 16
    Unfortunately I keep getting Syntac error in formula. Please help me I'm really desperate to solve this issue after 5 days of unlucky research.
    Thank you in advance
    Regards
    Ernesta

    Thank you all for your help. The issue was that the variable was assigned to the different table as the library. After I changed it, it worked fine.
    Regards
    Ernesta

  • Formula Variables in Report Painter- Syntac error in formula

    Dear Experts,
    I'm creating the report where I need to calculate annualized P&L. The formula is as follows : (P&L account/Period(variable ))*12
    I need to capture the From_period, which is entered by the user on the selection screen when running the report and use it as a variable in the formula above. Example: If User insert From Period 3, then the formula should be *P&L accoun / 3 * 12*
    I have tried so many different way but nothing seems to work. one of the ways i tried was:
    In the general selection Im using set variable 6P-S-PERIOVB.CCSS for period which consists of variable V_PERIO and B_PERIO.
    So Im trying to create a folowing formula:
    IF 1 >= u2018PER_FRu2019 AND 1 <= u2018PER_TOu2019 THEN 1 ELSE 16
    IF 2 >= u2018PER_FRu2019 AND 2 <= u2018PER_TOu2019 THEN 1 ELSE 16
    Unfortunately I keep getting Syntac error in formula. Please help me I'm really desperate to solve this issue after 5 days of unlucky research.
    Thank you in advance
    Regards
    Ernesta

    so, I would use parameters.....
    P_fr_MO(2) TYPE N DEFAULT '01',
    p_fr_yr(4) type n default '2011'.
    Then, to set my range, i would do something like....
    data: lv_to_mon(2) type n,
             lv_to_yr(4) type n.
    if p_fr_mo eq '01'.
      lv_to_yr = p_fr_yr.  "12th month, same year...
    else.
    lv_to_yr = p_fr_yr + 1.  "any other month puts us into next year.
    endif.
    case p_fr_mo.
      when '01'.
       lv_to_mon = 12.  "always for 12 month period...
    when others.
       lv_to_mon = p_fo_no - 1.  '''example 10/2010 to 09/2011.
    endcase.
    then concatenate the from and to variables into what format is needed to read the data...
    on the other hand, if the user gives us from and to, we have a different problem....one then has to calculate what part of a year they have and create a factor for multiplying any data values....
    for instance if user says Jan (01) to (03) March, then I know that to month - from month + 1 is the number of months I have....
    then 12 / that number is the factor to multiply the results by....
    example...
    data : factor(5) type p decimals 2
              months(3) type n.
    if p_to < p_from.  "adjust if I cross a year boundary....Oct to Jan becomes 13 - 10 + 1 or 4 months.
    p_to = p_to + 12.
    endif.
    months = p_to - p_from + 1.
    factor  = 12 / months.  " factor   12 /4 months = 3 times the values obtained  = 1 year.
    something like this....hope this is helpful to you.
    Edited by: DaveL on Oct 18, 2011 6:24 PM

  • Report painter execution error - KH014  "Report does not exist".

    Hi All,
    I customized one report in FSI3 and used SE43 to create a t code for this report. In the development system, report will be executable from this t code.
    Transport requests are successfully transported from development to production without any error. But on production when I tried to execute the report, I am getting the error KH014 - "Report does not exist".
    While checking in production I found that the report was missing from report tree in FSI3 and as a result the customized report cannot be executed. As per basis guys there was not a issue in request transportation.
    Has anyone encountered similar problem? How was it resolved?
    Thanks.
    Prashant

    Hi Mikko,
    Thanks for your reply but your solution is not working.
    Hi Stacy,
    I can execute the report from t codes like FSI3 & FSI0 in development.
    I used SE43 for t code creation. At the time of t code creation there is a option called "Drilldown" under Report type heading, In drilldown option I selected my report from report type 002 (Financial Statement Key Figure) and created the t code. After this I transported both the request to production server.
    Please let me know if this is wrong method or there is any other option to transport this report in Production.
    Thanks & Regards,
    Prashant

  • Report painter execution error - GR657 - set does not contain any entries

    Hello,
    During our execution of report we are getting the below error:
    Set 0102PCBT1IPROVDIV in set 0002$ZA13#######ROW0236 does not contain any entries
    Message no. GR657
    Diagnosis
    You cannot use empty sets to define reports.  The single-dimension set contains a basic set that does not contain any values.
    Procedure
    Use a set that contains at least one value, or enter values for the set defined.
    This has been discussed in a similar Thread in May 2010 by puri & Praveen Jagdeesan,
    However I am unable to trace the set & how to delete the blank values.
    0002$ZA13#######ROW0236 or ROW0236 in the system.
    Set 1IPROVDIV is exisitng in system.
    Also when we go to KAH3 - Cost element hierarchy & see in the where used list we are not able to see the set being used in the report whereas the system from where we have exported the report we can see that this set is being used in the report.
    Please could you help in resolving the same.

    Hello Murali,
    Thanks for the reponse. But set 0002$ZA13#######ROW0236 is not available in system.
    Please could you guide me on the same.
    Thanks & Regards
    Shreenath

  • Report Painter - Display settings of variations

    Hi,
    In my report CO, I have a characteristic which is displayed as a variation. It's a set variable, let's says a group of profit centers (a set of multiple single sets). When execute the report, the value list of variation is always expand-all. It's not quite user-friendly.
    Do you know how to set the variation as by default collapse-all? I know that we can do it as I saw in some SAP sample reports. I tried various ways but still not found any useful.
    Thank you for your quick response!

    Hello Huong Le,
    you can change the setting on the selection screen of the report - but you have to activate the 'expert mode' first: Environment -> Options -> Expert mode.
    As soon as you have this activated, the button 'Variation' will show up where you can choose between 'Explode', 'Single Value' or 'Do not explode'.
    Hope this is what you're looking for.
    Have a nice day!
    Regards,
    Irene Baldassari

Maybe you are looking for