Report painter:display of G/L with zero amount

Hi,
I have created a report in report painter for expenses by profit center. however the system is not showing the G/L for which no posting has been made although i have maintained those G/Ls in the report. Is there any way to display G/L with zero values also?
I am running the report at fiscal year level.

Hi, you can try to go the report painter (GRR2)
Formatting - section layout - Columns make sure the suppress zero columns is unchecked
and also you can go to Formatting - section layout - Columns - Treatment of zero rows - Print Zero Rows
Regards.

Similar Messages

(Report Painter) Display differnet language in one report.

Hi Experts,
i want to know can (Report Painter) display differnet language in one report depends on different user login.
like user with chinese lang login can display chinese in the report
and
user with english lang login can display english in the report?
if so, please give me so intruction on how to define the description on the text.
thanks

may be my poor english make u guys misunderstand my question.
actually i am talking the first Top row (which is lead column/ descrption column)
and first Left column in a report painter.
==================== <---First top row
= <--- first left column
=
=
=
currently i am using "change text" to type in description(english) by manual(), and the problem comes out when i login with other lang, say chinese lang for example, the column and row didn't display any text on it(all blank) after different lang login.
so just wonder is there any way to have a auto translation when different lang login.

Outgoing payment with Zero amount when Full adance is paid

I am making A/P down payment request based on purchase order, then I make full payment of PO (full advance payment - no amount of payment left with) through "Outgoing payment" which creates negative amount in Business partner balance and shows a negative entry in "outgoing payment" screen. Moving further, I make Goods receipt PO and then I make A/P invoice of regular amount based on goods receipt PO / Purchase order.
Up till now, the full payment has been made in advance through A/P down payment request and upon receiving goods the A/P invoice of regular amount is received. Now when I go to "outgoing payments" I have no amount left to pay (i.e. It displays 2 entries of same amount, one with positive amount of A/P invoice and the other one with negative amount of A/P down payment request to show the due balance = zero) So I am trying to clear the vendor "outgoing payments" by paying with Zero amount, but the system shows the error "The confirmation amount should be greater than Zero".
How can I clear the vendor "Outgoing payments" with zero amount ?? as it's payment has been made in advance.
Note: Please give me the solution by keeping in mind that I have to pay full amount in advance.
Solution to this problem would be highly appreciated.
Thanks and regards,
Farhan Sufi

Hi Farhan Sufi,
For Cases where full Advance is paid initially, You Follow these procedure, I have tested in my DB its working fine.
Step 1: Raise a Purchase order Say Rs 1000/-
Step 2: Raise a GR(PO) of Rs 1000/-
Step 3: Go To A/P Down Pmt -
Select the Vendor -
Say copy from GR(PO), And select te One you wanted. At the bottom in the DPM Field give 100% and Add the Document.
Step 4: Raise Out Going Payment by linking to the A/P Down Pmt what you have posted. ie., Go To Out Going Pmt Screen---Select the Vendor, This will display all invoices, Down pmts, Credit Memos, and JE's. Select the A/P Down Pmt what you have posted and go to payment means fill in the respective field and add the document.
Step 5: Go To A/P Invoice Screen, select the vendor. And click on Copy from GR(PO), Select the respective GR(PO) document.
And At the Bottom double click on Total Down Payment Button, This will display the list of all Down Payments for which Out going payments are also posted. Here Select the respective Down payment and add the document.
When you add this A/P Invoice document gets added and the status of the document will be closed. As you have made full payment in the A/P Down Payment Screen.
And This Invoice will not appear in the Out Going Screen as the document is closed.
Cheers,
Sree.

Can a credit memo be posted with zero amount?

Can a credit memo be posted with zero amount? What would it mean, that the goods qty have been posted free of cost?
Pls reply...
Thanks,
Swati.

yes, It depends upon the procurement...
I have raised a PO for 100 pieces, But the Vendor will supply only in Dozens..
That means for 100 pices , we will receive 9 Dozens( 108 pieces)..
Similarly some times if it's a Fragile material , the Vendor will send more pieces as a buffer..
If IR Qty > GR Qty , it becomes Qty variance..
Similarly I received 100 Qty & 5 pieces are Sub-Standard, then I will raise Credit memo for that...
Edited by: Manohar Raju on Apr 30, 2008 4:58 PM

Po with zero amounts

Can we create a PO with zero amounts? We need to track item received
for vendor performance. Need to create PO receive Items with need
by date & promise date. Same time match to Zero Invoice if possible.
Thanks

Hi
We have a laundry service brings washed shirts and pants every day.
If we have a new employee we use the same vendor to order new shirts and pants.
At this time we need to create a PO for the new clothes. We want to track the promise date and receive date for supplier performance.
Can we make a PO with zero amount and quantity like 5 shirts and 5 pants and later on receive it? And them match that PO in AP for zero amounts.
Thanks

Report Painter - Display two characteristics on one line in lead column

I have a requirement to produce a Report Painter report to display values by Cost Centre and Cost Element.
The requesting user wants to see the Cost Centre AND Cost Element keys displayed on each row of the report, to allow for manipulation in Excel.
I have no problem grouping Cost Element within Cost Centre or vice-versa, but am not aware of any way of displaying both key values on each row in the lead column (or anywhere else).
Has anybody done this?

Hi Robin,
the request is not unusual. However, report painter does not allow for two key columns or a key column combining two characteristics. You might consider using SAP Query (with table COEP or COSS/COSP for aggregates) if you do not want to resort to developing the report in ABAP.
Regards
Nikolas

Report Painter - Characteristic cannot be combined with key figures

Hi,
I have added a new field (ZZABTEI) to the report structure CCSS and using that field as a characteristic in the report. But when I execute the report, it is giving the error "Characteristic ZZABTEI cannot be combined with key figures". Can anyone help me to solve this issue.
Thank you,
Rekha

There no code for this. I had to add the new field to CCSS structure. Then there were some configuration to be done. Then this message is got when the report in the report painter is executed. The details of this error message is as follows :
Characteristic ZZABTEI cannot be combined with key figures
Message no. GR410
Diagnosis
Characteristic ZZABTEI is being used in a report with a key figure that does not match this characteristic.
System Response
The system cancels generation.
Procedure
Check the report definition: the key figures used must be compatible with characteristic ZZABTEI. For examples of useful combinations of characteristics and key figures, see the SAP standard reports.
Technical explanation: The Report Writer table assigned to the report is defined as a view with multiple database tables (somewhat similar to Report Writer table CCSS) and a key figure used in the report refers to a database table which does not contain characteristic ZZABTEI.
Example 1 for table CCSS: If the 'cost' or 'quantity' key figures are used in a report (referring to tables COSP and COSS), you cannot use the 'Statistical key figure' (only occurs in table COSR) characteristic in the rows. On the contrary, using the 'Cost element' (tables COSP and COSS) characteristic is not permitted for the 'Statistical quantity' (table COSR) key figure.
Example 2 for table CCSS: If a report only displays line item data (key figures IE... or PE...), you cannot use the 'PERBL' characteristic, because it is only valid for summary data. You have to use the 'PERIO' characteristic for line item data.
Thank you,
Rekha

Report Painter Display Error

When executing a Cost Centre Z developed Report painter report, The values appearing blank on the face of the report but when drilling down to line item level i can see the value exists. This is not a access/security/authorization error as no crosses on the face of the report.
Please advice
M Khan

but the total lines are not adding to zero. in a another report painter report one of the lines value is not equal to line item total! it is quite a strange behaviour that i have never come accross! any clues?

Report Painter: Display only own Libraries in GRR2

I'm working with Report Painter and Key Users find it troublesome to explore all the library tree until they get their own library...
Does anyone knows if it is possible in transactions GRR2 or GRR3 to hide the standard libraries???
Thanks for you help!

I have configured that one but it seems that in transaction GRR2 or GRR3 is checking other Authorization Group (G_803J_GJB = Report Writer: Report Group)
I will configure both or I will raise an OSS Message with the incident.
Thanks for the prompt response!

IR 6570 fax TX report or "confirmation page" comes out with zeros.

Our office has a Image Runner 6570. It works fine, except for our Fax TX Report or confirmation page comes out with no info. THe Job No./ St. Time/ Usage T/ Pages all come out as zeros. The fax goes through to the reciepent, but we would like the cofirmation page to work as intended. We turned off the IR 6570, that didn't affect anything. We switched the Fax TX report seetings from off to error and on, but it still comes out as all zeros.
If anyone has had this issue or knows how to resolve it, a comment would be apreciated.

Hi CalebR!
Thanks for posting in the Canon Forum! Canon does not provide direct support for imageRUNNER series products, but your dealer will be able to help you! If you don't have a dealer, please call us at 1-800-OKCANON (652-2666) and we will be happy to provide dealers who are in your area.

Query Trip Data with Zero Amount

Dear all,
I have requirement to retrieve every trip record which has zero amount in its total cost. It didn't work when I use TCode S_AHR_PH0_61016401 (General Data Trip) for this query purpose.
I also took effort to make my own query definition using logical database PTRVP. This custom query used table PTRV_HEAD, PTRV_SHDR, PTRV_SREC. Later, I realized that table PTRV_SHDR, which save data for trip total cost, never store any trip record that has zero amount in its total cost.
Is there any configuration to make PTRV_SHDR able store the zero-trip?
I really do appreciate every help here. Thanks a ton!
Regards,
Erwin

Hi Erwin,
Yes i have tested and then suggested..
Please note that on my side, system doest NOT display if you simply click on set filter (on Total Cost) and insert 0.00 amount on lower and upper then execute.
You need to select multple selection button and then place 0.00 in Select Single Value and then execute..
Regards,
Muhammad Umer

EDI Credit Memo with Zero amount

Dear Experts,
We are using EDI for MIRO Invoice posting. PO is Non-GR Based Invoice. So IR has been automatcally posted first (ex: qty = 4)
Then GR has been posted also with qty =4. Then Credit memo was posted with Qty = 1, but we noticed that the posting has zero amount, then Accounting Document has posting to Stock Account and GR/IR Clearing account with amount = to 1 Qty.
Can anyone explain what happened? I know that Credit Memo posting should have posting to Vendor Account, but this case it didn't happen.
Thank you in advance.

Hi.. thanks for your input.
Yes, I understand that the posting is coming from Vendor, but I am confused, why the posting has zero amount?
As I understand, credit memo is dealing with the amount of the qty that might be has defect that we have to deduct this amount to Vendor payment. But what happened is, it only posted to Stock Account and GR/IR clearing account, no Vendor Line was created in the FI Doc because in the IR document itself does not have the amount.
Thank you and your further input will be highly appreciated.

Report Painter - Display Report

Dear Friends,
While displaying/changing Z reports from GRR3 transaction, we are getting short dump.
The dump does not occur for standard transactions.
The error occuring is:
The current application program detected a situation which really should not occur. Therefore, a termination with a short dump was triggered on purpose by the key word MESSAGE (type X).
Short text of error message:
RAISE MKES1F12_READ_FPAGE_FCOLUMN       (internal error)
Please let us know if anything further need to be done with the Z reports after creating them in GRR1.
Advance Thanks
Swapnil

Hi Swapnil,
Check this note
Note 330457 - Drilldown report not executable
Its related to the dump 'MKES1F12_READ_FPAGE_FCOLUMN' . Try applying the corrections in the Note.
Regards,
lakshman.

Report servlet display a valid jobid with a blank screen on IE

Hi,
Our production environment runs 9i app server. App server runs on HP box and users run Window's Internet Explorer. We have a few desktops with IE unable to display report output (pdf) from a valid repserver job id.
I can showjobs. Forms successfully run rep obj and show document except the browser only display a small icon on the top left. I am guessing the problem is in IE.
Does anyone have experience fixing this? Thank you.
gale

I could open pdf file without using IE. It turned out IE was unable to open pdf any longer. After acrobat reader is reinstalled, this is no longer an issue.

Report Painter - Display settings of variations

Hi,
In my report CO, I have a characteristic which is displayed as a variation. It's a set variable, let's says a group of profit centers (a set of multiple single sets). When execute the report, the value list of variation is always expand-all. It's not quite user-friendly.
Do you know how to set the variation as by default collapse-all? I know that we can do it as I saw in some SAP sample reports. I tried various ways but still not found any useful.
Thank you for your quick response!

Hello Huong Le,
you can change the setting on the selection screen of the report - but you have to activate the 'expert mode' first: Environment -> Options -> Expert mode.
As soon as you have this activated, the button 'Variation' will show up where you can choose between 'Explode', 'Single Value' or 'Do not explode'.
Hope this is what you're looking for.
Have a nice day!
Regards,
Irene Baldassari

Report painter:display of G/L with zero amount

Similar Messages

Maybe you are looking for