Report Painter ECC 6.0 Issue.

We are running on ECC 6.0 and we are having a very critical problem in
a report painter report.This issue is very urgent for us here.
The description is as follows:
We are running a Report Painter report in GR55 and executing it.The
report has cost center data on the different company codes which are
the columns in the report. Somehow we are getting the same data
displayed for all the company codes.
Initially when i tried to run the report , it gave me the message
Message no. KCRP026
Characteristic 'BUKRS' does not exist and will be deleted from the form.
In our previous version 4.6c we never had any problem.This problem came
after the upgarde was done.
Thanks
srikanth.

Hello,
you did not provided enough information but I guess you
should check first of all in your library (1VK?) if the char
is flagged or not... probably you did that in your previous release
br,

Similar Messages

  • Project System - Report Painter - Cost roll up issue

    Hi,
    We have an issue with the roll up of the costs in Report Painter report in Project Systems. The problem occurs only with those costs which have been settled to an internal order from a WBS element.
    We are using the same cost elements to settle to the Cost Center and Internal order and roll up of the costs work fine for those settled to cost center. But the roll up does not happen for the costs settled to an internal order. Would appreciate if someone can guide on how to fix this issue.
    Raj.

    Here are the values:
    Period/year     000.1900     Remainder 1900     PERIO     Period/year
    Value Type     4     Actual                                                 
    Value Type     10     Statistical Plan                                                 
    Object ind.     P     Project item                                                 
    Object ind.     1     Order plan values: appended, apportioned     9     Order values: not appended, deleted
    Debit type     1     Costs and credit-side payments                                                       
    Thanks for your help.
    Raj/

  • Report Painter Select Screen Character Issue

    I have a report make from report painter. In the select screen, it supposed to show in ficical year, accounting periond, controllong area, for selection, but the character could not be shown correctly,
    it show as "#####".
    Question: How can I fix the charater issue?
    Thank you in advance.

    hi
    set the optimize column width  = 'X"

  • Plan next yrs values not appearing in Report Painter

    Hi,
    In our one of Z report (developed thrugh SAP std Report Painter functionality), Plan next yrs column does not shows any value in output of report.
    Basically this column should show next years plan values for WBS Element cost elementwise.
    When I double click on any of the cell of this column, I am getting output with 0 records but selection criteria is appearing as Period 7 and Fiscal year as 2999 on output screen on the top. So I am thinking that output is not appearing because of wrong selection criteria field values/characteristics values.
    Just wanted to know from you all guys, what things should I check in Report Painter to resolve this issue? Also what are the causes of this issue?
    Could you please tell me the remedial procedure and transaction code to resolve this kind of issue?
    Edited by: SWAPNIL PRAMOD KHARUL on Jan 30, 2011 12:17 PM
    Edited by: SWAPNIL PRAMOD KHARUL on Jan 31, 2011 9:29 AM

    Hi,
    Thanks for reply.
    Characteristics are:
    Value Type: ZCJUL01
    Value Type:10
    Version:6-VERP
    Period:  7
    Valuation:0
    Object ind.:1  to 5
    Object ind.:P
    Fiscal Year: Z-GJHNJ Next Year  to 2999
    I think it looks like wrong Period selection characteristics value.
    Please suggest/guide what has to be done?
    Edited by: SWAPNIL PRAMOD KHARUL on Feb 3, 2011 9:19 AM
    Edited by: SWAPNIL PRAMOD KHARUL on Feb 3, 2011 9:21 AM

  • Issues in Report Painter Reports

    Dear All,
    We are on ECC 6.0. We are using some Report Painter Reports and we are facing the following 2 issues:
    1. Authorization
    For some of the Profitability Reports, we are facing authorization issues. e.g. If I do not need a user to view the profitiability of a particular Business Area to which he does not belong to then I should be able to restrict the same via authorization. However, I do not know where to maintain such authorization objects in Report Painter Reports
    2. Financial Statement Version
    We have created a Cash Flow Statement by using the Report Painter. We have created a Form whereby we have assigned GL Accounts to some characteristics and Financial Statement Version Item to others. However, when we execute the report, we can see figures for only those items where we assigned the GL Accounts and not for those items where we assigned FSV Items.
    Thanks,
    Shalin Shah

    Hi,
    1: search SAPNET with search terms "report painter, authorization", guess you find some useful notes.
    2: Try T-code KE5B to convert Financial Statement Verison sets to sets that can be used in report painter.
    Best regards, Christian

  • Drill down value not matching with Displayed Report Painter Issue-GR55

    Hi,
    Need your help for an issue in drill down value of report painter from actual cost coloumn.
    I have created a new report group based on OSS Note-157720 in GR55 Traction. This new report group will provide data of Planed / Actual cost, Planned / Actual Quantity of the project in range of fiscal year/periods. The issue in this report is displayed data of actual cost is not matching with drill down data. The actual cost coloumn is formula coloumn which framed by subtracting All periods cost coloumn, Before Periods Cost Coloumn and After periods cost coloumn.
    Could you suggest on this issue.
    Thank you for your cooperation.
    Regards,
    Rakesh

    The report you are running first might have been created with some hidden columns that contain more than one variables relating to period and fiscal year. These may not be matching those that are required to run the drilldown. Look into the definition of the drilldown report. If you would want to match the first report, It may be better to identify which report runs on drilldown and the run that report with the required parameters.

  • Report Painter in ECC 6.0

    Dear Viewers,
    My client is using the report painter in classic GL account. Recently, they migrated to New G/L ECC 6.0.
    All the report painters also migrated from old system. When i tried to execute the report in the new system there is no output.
    Since the table GLPCT is not updating. Now I would like to know how to take the report painter report in the new system.
    Thanks
    Aswin

    Hi ,
    In New GL in ECC 6 , GLPCT table is replaced by FAGLFLEXT.
    So you need to create new set using GS01 taking the table FAGLFLEXT.
    Also create a new variable as per your requirement and assign them to the Gen Data Selection in the report painter by going to Edit > Gen Data Selection.
    Hope it helps
    SJ

  • Issue with Report painter report

    Hi Gurus
    I need your help with an issue with one of our report painter reports. I have created a new report with Fiscal Year, Ledger, Company code, and Account number range in General data selection. The report row has field Segment and each period corresponds to one period of the fscal year. In here, I have selected Period and Record type 0 as characteristics. The basic key figure is KSL for second currency.
    I am able to save the report but when I execute it, I get the error that
    *Characteristic GJAHR cannot be combined with key figures*
    Can someone please help me as why I am getting this error?
    I appreciate your help.
    Thanks,
    Shalu

    Hi
    I think you have to rechek the genral data selection setting , related to fiscal year.
    had u defaulted the fiscal year or used variant for fiscal year
    Thanks
    alok

  • Report painter issue with displaing a month budget

    Hi,
    I have a problem with making report in report painter.
    I want to display a month budget of cost element for the one particular cost center.
    For example: Iu2019ve putted two characteristics in one row, a set (which contains cost element number) and cost center. In column Iu2019ve placed these characteristics : period, value type and fiscal year.
    The main issue is that the report displays only u201C0u201D even when there are some assets on that cost element for that cost center.
    Of course when I remove characteristic u201CCost Centeru201D from a row, I will see some non u201C0u201D values in my report. I used CCSS table in my report and KSTAR field in the set.
    How can I make report showing assets for cost elements for a particular cost centers? Of course I would like to have more than one such u201Ccost elementu201D-u201Ccost centeru201D pair in my report.
    Regards,

    Solved

  • Issue in GR55 report painter report not able to pass Exclusive values (E)

    Hi all,
    According to client requirement we have added selection values in P&L Report Painter report.
    We have an issue we can only select data/range of data that we want to include(sign = I -inclusive) in the report. I cannot exclude values(sign = E - Exclusive).The error message  get is as follows.
    Message no GR107
    Diagnosis:
    You can enter intervals or single values fo certain fields.The system only supports inclusive intervals(Opertaors BT I) or inclusive single values(operators EQ I).
    We found that its standard behaviour..Is there any SAP note to come over this or any other solution....
    Regards,
    Greeshma.

    Not possible....SAP standard behaviour....

  • SAP PS - Report painter Issue

    We have some Z report development using Report painter for the project , we call it is project control sheet, it contains many fields along with the commitment values for the WBS.
    Z report values differs from the cji5 values..when we drill down to the Z report it actually takes you to the different value.
    we had reconstructed the project info record using CJEN. but no use .
    CJI5 values are correct but custom report has the issue.
    Can you please help

    Hi Mandar,
    Please check below settings for commitment values.
    Name
    From
    text
    to
    text
    Version
    0
    Plan/Act - Version
    Value Type
    21
    Commitments from Purchase Requisition
    Value Type
    22
    Purchase Order Commitment
    Value Type
    23
    Reservation Commitment
    Value Type
    24
    Funds Commitment
    Value Type
    26
    Commitments from Transfer Price Agreemen
    Object ind.
    P
    Project item
    Object ind.
    1
    Order plan values: appended, apportioned
    9
    Order values: not appended, deleted
    Debit type
    1
    Costs and credit-side payments
    these values need to set in form or you can use form 12KST1A       Costs: Budg/Act/Cmmt
    thanks
    Sunil

  • GL Text missing in Report Painter after upgrade to ECC 6.0

    Hi SAP FICO Gurus,
    We upgraded our system from 4.7 to ECC 6.0 and some of the report painter reports are not displaying the GL Account description in the reports. Instead of the GL Text the report shows the GL Account number with preceding Zeros.
    Please suggest me what I am missing. I tried searching the forums but no success.
    Thanks in Advance,
    Nitin.

    Applied OSS Note 360096 and it worked. Thanks for all your help.

  • GR55 Report Painter Issue

    Hi,
    I have an issue in report painter-GR55. Our report in report painter will show planed / actual cost, planed /actual quantity. Our material cost planing is done from cost activity of the project builder. Whereas in the report output , some material quantity is showing as planed quantity for which planed cost of the project is showing wrong. We are picking data from RWCOOM Table. Please advise on this.
    Thanks & Regards,
    Ranjan

    Not possible....SAP standard behaviour....

  • Report Painter Issue-GR55

    Hi,
    I have an issue in report painter-GR55. Our report in report painter will show planed / actual cost, planed /actual quantity. Our material cost planing is done from cost activity of the project builder. Whereas in the report output , some material quantity is showing as planed quantity for which planed cost of the project is showing wrong. We are picking data from RWCOOM Table. Please advise on this.
    Thanks & Regards,
    Ranjan

    Not possible....SAP standard behaviour....

  • Drill down issue in report painter report

    Hi-
    We have an issue where the drill down in one of our report painter reports isn't working.  When the user tries to drill down, it says the list contains no data.
    However, if the target report (of the drill down) is run first, and then the report painter report is run, the drill down will then work properly.
    We need to know where to check to get this fixed.  It has us stumped.  The report painter report is associated with a report group.   
    Thanks,
    Kevin

    Just needed to update the variant from the calling program's report group.  Duh.

Maybe you are looking for

  • My iphone isn't recognized by finder or itunes

    Hi, I got an iphone 3gs not too long ago, and everything seemed to be fine. On the rare occasions that I wanted to sync it, I did so successfully. I don't sync often, so I'm not exactly sure when the problem arose, but in any case, now, when I connec

  • Code page of the receiver system could not be found".

    Hi, We are getting an error in IDOC-XI-IDOC scenario that the "code page of the receiver system could not be found". What could be the reason for this error? Because of this error all IDocs are getting stuck in XI. Kindly help. Thanks, John

  • SCCM 2007 Problem with sign policy assignments

    Hello everyone! I am having a error on status of my central site under SMS_Policy_Provider, the error say: SMS Policy Provider has failed to sign one or more policy assignments. It will retry this operation automatically. This error repeat around eve

  • Macbook pro Audio-in

    Can you use the audio-in on a macbook pro to record into Logic express? Or do i need an external audio box of some sort? I've been trying all kinds of different things to get audio to record inside of logic but nothing seems to be working. So can you

  • Filename arrays in bash

    I want to make a filename array to use with ffmpeg under BASH.  For example there are six video files named video_1.h264, video_2.h264, video_3.h264, video_4.h264, video_5.h264 and video_6.h264. I want to then concat them using ffmpeg ffmpeg -i "conc