Report painter execution error - GR657 - set does not contain any entries

Hello,
During our execution of report we are getting the below error:
Set 0102PCBT1IPROVDIV in set 0002$ZA13#######ROW0236 does not contain any entries
Message no. GR657
Diagnosis
You cannot use empty sets to define reports. The single-dimension set contains a basic set that does not contain any values.
Procedure
Use a set that contains at least one value, or enter values for the set defined.
This has been discussed in a similar Thread in May 2010 by puri & Praveen Jagdeesan,
However I am unable to trace the set & how to delete the blank values.
0002$ZA13#######ROW0236 or ROW0236 in the system.
Set 1IPROVDIV is exisitng in system.
Also when we go to KAH3 - Cost element hierarchy & see in the where used list we are not able to see the set being used in the report whereas the system from where we have exported the report we can see that this set is being used in the report.
Please could you help in resolving the same.

Hello Murali,
Thanks for the reponse. But set 0002$ZA13#######ROW0236 is not available in system.
Please could you guide me on the same.
Thanks & Regards
Shreenath

Similar Messages

Error:The node does not contain any elements

Hi Experts,
I am getting this error.
The following error text was processed in the system SR6 : The node does not contain any elements. COMPONENTCONTROLLER.1.ROADMAP
The error occurred on the application server server6_SR6_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
      Method: RAISEELEMENT_NOT_FOUND of program CL_WDR_CONTEXT_NODE===========CP
      Method: IF_WD_CONTEXT_NODE~SET_STATIC_ATTRIBUTES of program CL_WDR_CONTEXT_NODE_VAL=======CP
      Method: WDDOINIT of program /1BCWDY/G25NECI0LTPP66VI3KOI==CP
      Method: IF_WDR_COMPONENT_DELEGATE~WD_DO_INIT of program /1BCWDY/G25NECI0LTPP66VI3KOI==CP
      Method: DO_INIT of program CL_WDR_DELEGATING_COMPONENT===CP
      Method: INIT_CONTROLLER of program CL_WDR_CONTROLLER=============CP
      Method: INIT_CONTROLLER of program CL_WDR_COMPONENT==============CP
      Method: INIT of program CL_WDR_CONTROLLER=============CP
      Method: INIT of program CL_WDR_CLIENT_COMPONENT=======CP
      Method: INIT of program CL_WDR_CLIENT_APPLICATION=====CP
What is the problem here?
Thank you.
Lalitha.

(Assuming you have created elements for node...)
Definitely it is cardinality problem, please check that... Try to understand below points to avoid such error.
When a node is created in the context of a Web Dynpro component, the cardinality of the node is specified. The cardinality defines how often a node is to be instantiated at runtime u2013 that is, how many elements of this node are available at runtime.
u2022        1u20261          Only one element is instantiated.
u2022        0u20261          At runtime, no more than one element is instantiated, but it is also possible that no element is instantiated.
u2022        1u2026n          n elements can be instantiated, but at least one element must be instantiated.
u2022        0u2026n          The number of instantiated elements of the context node can vary.
The cardinalities 0..n and 1..n correspond to the declaration of an internal table. The cardinality 1..1 corresponds to the declaration of a structure.
Thanks,
Swanand.

J1IEX post than made error like does not contain any selectable items

Respected Sir,
We have purchase the Goods From SEZ unit and it wil be treated as import made.
We doing the following activities
1. Prepared the Import P.O.
2. released the same P.O.
3. Doing the MIRO for Custome Vendor
4. Capture the J1iex
than we fins the below mention ERROR & Diagnoses and ERROR
Document 4400000016   does not contain any selectable items
Message no. M7064
Diagnosis
The document or document item entered cannot be adopted.
Possible reasons for this are:
u2022     The document items have already been processed
(Suggest zero lines indicator set?).
u2022     the document items have been deleted or are blocked.
u2022     the document items have been created for a different plant.
u2022     (for reservations only) movements are not yet allowed for the reservation items.
u2022     (for reservations only) the document items are retrograde components of the order. These are posted using the order confirmations.
u2022     A confirmation must exist for the document items.
u2022     The document items must be released first.
u2022     The document is an R/2 document.
Procedure
Make sure your entries are correct.
u2022     If the system has already processed the total quantity, you can set the Suggest zero lines indicator. The system will suggest the quantity zero for the items that have already been processed.
u2022     If you have entered a particular item, cancel the item. If you do not enter an item, the system searches all of the open items in the document.
u2022     If the document is a purchase order, production order or a reservation, you can
Kindly doneedfull above mention error
Thanks & Regards
Bipin Shah

HI,
Please check whether all the vendor and excise details have been maintained in J1id. i.e Excise rate maintainance.
Hope this helps.
Regards,
Prasanna
Award pls if helpful

Workbook does not contain any input-ready variables

Hello Experts,
We have one workbook which is not reacting when click on REFRESH or SHOW VARIABLE.
If clicked on VARIABLE screen it is throwing error "The workbook does not contain any input-ready variables" (screenshot attached)
Points I have checked are as below
1. If I create a new workbook by executing the respective query and refresh then it is working.
2. The file is in xls format and I have checked the USE XLS format under Global setting.
3. My Excel version is 2010. SAP version is SAPKW70105. BEx 7.X, support package 8.
4. It is not authorization issue otherwise the issue would have happened for the new workbook I created for testing.
5. Also I tested with user ID with SAP ALL access.
is there any way to repair the workbook so that it respond to Variable and refresh options ?
Thanks,
Gopi R

Work book might be corrupted : As other said need to create / Recover Old work book
Refer Below Doc process For recovering a corrupted workbook :
How to recover a corrupt workbook.

Context node does not contain any elements

Hi Masters,
                 I create a node dynamically from structure using CL_WD_DEMO_DYN_MODEL->create_nodeinfo_from_struct method. my code as
nd_field_info = nd_field->get_node_info( ).
wd_this->zwd_assist->create_nodeinfo_from_struct( EXPORTING
parent_info = nd_field_info
structure_name = dotablename
is_multiple = abap_true ).
When am set the data to context then it gives the error like node does not contain any elements, but i verified the attributes using nodeinfo then all attributes will be displayed, but when value inserting time it throws error.
Waiting for Your Response...
Advance Thankyou
Regards,
Sathya

Hi sathya ,
the method you using is absolute , the replacement for the methos is if_wd_context_node_info->add_new_child_node
pls refer the sample code to create a dynamic Node .
DATA: pa0001 TYPE REF TO cl_abap_structdescr,
           comp_tab     TYPE cl_abap_structdescr=>component_table,
           struct_type     TYPE REF TO cl_abap_structdescr,
          ls_pa0001   ?= cl_abap_typedescr=>describe_by_name('P0001').
          comp_tab      = p0001->get_components( ).
          struct_type   = cl_abap_structdescr=>create( comp_tab ).
struct_type = cl_abap_structdescr=>create( comp_tab ).
* now the nodeinfo is created
node_info = wd_context->get_node_info( ).
node_info = node_info->add_new_child_node(
    name                         = 'MY_NODE'
    IS_MANDATORY                 = ABAP_true
    IS_MULTIPLE                  = ABAP_true
    STATIC_ELEMENT_RTTI          = struct_type
    IS_STATIC                    = ABAP_false
refer DEMODYNAMIC component for dynamic creation of node
regards
Chinnaiya P
Edited by: chinnaiya pandiyan on Dec 15, 2010 2:07 PM

BI Publisher Word Template The report does not contain any data fields.

I have OBIEE BI Publisher report (10.3.4) working fine using BIP but using MS Word 2003 I want to create new template and want to add charts etc.
Step 1. In MS Word I successfully login Oracle BI Publisher as Administrator
2. Oracle BI Publisher -> Open (I open the report)
3. Go to Insert -> Table Wizard
I get this error:
The report does not contain any data fields. Please make sure that the reports generates data with the default settings or provide a valid XML file.
Please help

Hi
How do I load XML data? Also why XML data load is required? Do I have to export XML data from BIP View screen and load from the same file from the word?
Please clarify
Thanks

Mysite Error - The site does not contain a default keywords termstore

I know this error has to do with the Managed Metadata Service. I recently had to delete my User Profile Service and Search Service, and then recreate new ones. Do I need to connect them to the existing Managed Metadata Service somehow?
I get this error when trying to change certain user profile columns in Mysites.

Go to the list of shared services in Central admin, highlight the Managed Metadata Service Proxy and select the properties button from the Ribbon. You'll see four checkboxes. Make sure the one labeled 'This service application is the default
storage location for Keywords' is checked. Depending on the order of installation of services or if the Managed Metadata service is deleted and recreated this sometimes doesn't happen.
http://social.technet.microsoft.com/Forums/en-US/3cba2f1a-c1c7-4aed-b46e-6247f6a14e88/after-setting-everything-up-successfully-error-the-site-does-not-contain-a-default-keywords?forum=sharepointadminlegacy
http://technet.microsoft.com/en-us/library/gg750250%28v=office.14%29.aspx
http://donalconlon.wordpress.com/2010/06/30/managed-metadata-setting-the-default-termstore/
http://www.deliveron.com/blog/post/Define-the-default-Term-store-for-New-keywords-in-SharePoint-2010.aspx

File Screening Audit Report does not contain any data : report statistics is empty

Hi ,
I have enabled File screen audit and Record file screening activity in auditing database options in file server 2008.
I am getting details of file screen audit in Event log , But incident report file screen audit report does not contain any value.
Getting report for each incident of file screen audit , But it does not contain any data in report statistics.
Data available in scheduled report of file screen audit.. not available in incident report only..
Please assist...
Thanks,
Vasanth.M
Thanks, Vasanth.M.

Please note that, If the Record file screening activity in the auditing database check box is cleared, the File Screening Audit Reports will not contain any information. To configure file screen audit, I would refer you on this informative
technet library :
https://technet.microsoft.com/en-us/library/cc754540.aspx
Carlo

'Document does not contain any items' error while posting GR from BAPI

Hello Friends,
I am trying to post GR from BAPI 'BAPI_GOODSMVT_CREATE' but some time it post successful and some time it does not post..gives error 'Document does not contain any items'....i have search all option but did not get any solution why this error is coming....kindly help me if you have any information regarding that.
The strange thing is i have alrady posted GR with some test data and later on again am trying to post GR with same test data but it is giving error as above.
For your information...i am using enhancement spot in standard program for GR posting...could it give any problem.
Regards,
Rajkishor.

Solved by my self...problem was i were using enhancement spot in standard program because of this it was creating problem have search new enhancement spot and put my code out there now it is working fine.
Thanku very much all of you for your reply.

Uploading AIR for IOS thru Application Loader I get the following error - The package does not contain an Info.plist.

I'm publishing an .fla in AIR for IOS.
I'm in CC 2014 so first I need to know which AIR should I publish in?
newest is AIR 14.0.0.178 for IOS
IOS deployment type is App Store
publishes with no error.
I see the following files included .swf and app.xml
I convert the .ipa to a zip file
Upload that thru the Application Loader I get the following error
The package does not contain an Info.plist.
Where is the infoplist for this and do I convert the .ipa and the info to a zip file?
I converted the .ipa to a .zip and the intoplist file is NOT THERE how do I generate this?
Any help here?

Ok this is becoming very very frustrating as I have been at this for hours now. So the only way to explain this is to write what I did step by step as I have to be doing something wrong, just to recap:
I was publishing from Flash CC 2014 using AIR 14.0 and getting Digital Certificate is not valid message.
Was instructed to download new AIR 17 , I did this installed into Flash and used to publish.
I used my previous p12, app ID and distribution certificates all generated properly.
The file worked ONCE but I got an app ID error ( I understood I used the wrong app ID)
I changed it to the right app ID and the very next time and after 10 attempts I got the same error Digital Certificate is not valid
SO I then downloaded AIR 16.0
RE DID ALL MY CERTIFICATES AND P12'S
went to publish and I STILL GET THE SAME MESSAGE Digital Certificate is not valid

Error while deploying BPM : DC bpm_0/bl/ddic does not contain any archives for deployment

Hi All,
I'm using SAP PO 7.31 single stack. I've created a simple BPM in NWDS. I'm able to successfuly build the BPM which I created but when I "Deploy" it throws the below error.
DC bpm_0/bl/caf/metadata does not contain any archives for deployment
DC bpm_0/bl/ddic does not contain any archives for deployment
DC bpm_0/bl/caf/dictionary does not contain any archives for deployment
Not sure what/where to check and fix the issue. Can you please help me in fixing the issue?
Thanks
Raj.

Dear Raj,
I am looking into this.
In the meantime can you try this also.
xxx/pr/pm: Deployment error,&nbsp;GD&nbsp;|&nbsp;ABAP,&nbsp;SAP,&nbsp;benX AG,&nbsp;benXBrain,&a…
Thanks & Regards,
Patralekha

Get an Error window, The source folder does not contain any supported camera raw files

I am using CS2 and it would not open up my latest RAW files, I was getting a warning Could not complete your request because it is not the right kinds of document. So, I checked the Camera Raw Plug-in and it says Version 3.7. I see that my camera an Olympus E-20 is supported. But it is not opening the Raw files, the day before I took jpeg and they have opened. I will not trash my Adobe Photoshop CS2 because it was a royal pain to install and I don't know where the CD is.
I installed the latest DNG Converter and when I try to open up the folder which has all the RAW images that didn't open in Adobe, I still get an Error window that says, "The source folder does not contain any supported camera raw files." Why? It says it supports my Olympus E-20. I actually have the E-20n, I don't think that is the problem. My RAW icons usually show up as small image thumbnails and this time they are gray icons only with the incorrect date under the icon. Is there another product I can use without spending money? These images I took in RAW were special and I don't want to lose them. Please help!
Esther

Hello, I was using only CS2 with my Olympus E-20n for 5 years, no problem. It just started acting up in RAW this year. I downloaded Picasa that same day and now it seems to be opening up all of my RAW files that didn't open the other day. So, I think Picasa installed a new plug-in adaption to CS2 because now all my RAW icons have a new logo on them, the same one that's in Picasa. Strange, but it works now and I am not complaining anymore. I love CS2 and the many ways I can adjust RAW files, so I am using it, Picasa is a sideline now that I can take a look at many thumbnails and it organized all my photo files by the year and folders. Amazing free software. I have probably 60,000 images in my computer and an external hard drive and Picasa picked them all up and made a library, cool.

Error msg after scan "ADF does not contain any pages"

HP office jet 6600 has worked well for months, but recently 3 out of 5 times that I tried to scan from the ADF, whether one page or many, the scanner runs through its cycle and then gives me the following error: “The scanner automatic document feeder (ADF) does not contain any pages. Insert the pages to be scanned into the ADF and try again.”
Sometimes I just run it again and it works. I'm using HP scan that came with the 6600 download full driver package; running Windows 7 64-bit. I use the scanner significantly and it has operated perfectly for over a year and I haven't changed anything that I know of.Appreciate any help that somebody can give me… I have cleaned rulers and "flicked the little white thing", and some of the other things that were mentioned for similar problems.

Hello I would be happy to help you with the automatic document feeder (ADF) issue you are having with the Officejet 6600. Even though it's a different issue this document has several steps you can try; Vertical Bands, Lines, or Streaks in Copies, Faxes, or Scans. I've copied the applicable steps here for you. Clean the scanner glass and scanner lid If the scanner glass or the white underside of the lid has fingerprints, smudges, lint, dust, or other debris, this can slow performance and affect copy and scan quality. To resolve this issue, clean the product.Before you begin, gather the following materials:Several clean, soft, lint-free clothsMild glass cleaner
CAUTION:Use only glass cleaner to clean the scanner glass. Do not use cleaners that contain abrasives, acetone, benzene, or carbon tetrachloride. These substances can damage the product. Avoid isopropyl alcohol (rubbing alcohol) because it can leave streaks on the glass.Press the Power button () to turn off the product.Disconnect the power cord from the rear of the product.Lift the scanner lid.
Figure : Lift the scanner lid
Spray a clean, soft, lint-free cloth with mild glass cleaner.
CAUTION:To protect the scanner, do not spray the glass cleaner directly on the glass.Clean the scanner glass, and the glass strip next to the scanner glass, with the lint-free cloth.
Figure : Clean the scanner glass and the glass strip
Clean the white underside of the scanner lid.
Figure : The underside of the scanner lid
Dry the scanner glass and the glass strip thoroughly with a clean, dry cloth or chamois to prevent spotting, and then dry the white underside of the scanner lid.
NOTE:Do not use paper-based wipes or tissues that can leave fiber residue.Close the scanner lid.Reconnect the power cord to the rear of the product.If the product does not turn on by itself, press the Power button () to turn it on.Try to copy, fax, or scan again.If these steps resolved the issue, you do not need to continue troubleshooting.If the issue persists, continue to the next solution.
Clean the automatic document feeder (ADF)
Follow these steps to clean the automatic document feeder (ADF), and then make blank copies to check if the issue is resolved.Step one: Clean the ADF rollers and separator padFollow these steps to clean the automatic document feeder (ADF).Gather the following materials:A clean, lint-free cloth, or any cloth that will not come apart or leave fibersDistilled, filtered, or bottled water (tap water might damage the product)Remove any originals from the document feeder tray.
Figure : Remove any originalsPress the Power button () to turn off the product.Disconnect the power cord from the rear of the product.Lift the cover of the ADF until it stops.
Figure : Lift the ADF cover
Locate the pick rollers and the separator pad.
Figure : Locations of the pick rollers and the separator pad
The ADF coverThe pick rollersThe separator padLightly dampen a clean lint-free cloth with distilled or bottled water, and then squeeze any excess liquid from the cloth.Use the damp cloth to wipe any residue off of the separator pad.
Figure : The separator pad
Use the damp cloth to wipe any residue off of the pick rollers.
Figure :
Dry the rollers and the separator pad with a clean, dry, lint-free cloth.Do not close the ADF cover. Continue to the next step to clean the glass strip in the automatic document feeder.
Clean the glass strip in the automatic document feeder
Follow these steps to clean the glass strip underneath the mechanism in the automatic document feeder (ADF).
NOTE:The images in this step might not be of your product, but the steps are the same.If you have not done so already, disconnect the power cord from the rear of the product.Remove any originals from the document feeder tray.
Figure : Remove any originals
Open the ADF cover, and then lift the ADF mechanism.
Figure : Lift the ADF mechanism
Lightly dampen a clean, soft, lint-free cloth with a mild glass cleaner.Gently clean the glass strip inside the ADF, and then thoroughly dry it to prevent spotting.
Figure : Clean the glass strip
Lower the ADF mechanism back into place, and then close the ADF cover.Step three: Make a blank copy using the scannerFollow these steps to make a blank copy using the scanner.Lift the scanner lid.Figure : Lift the scanner lidRemove any originals from the scanner glass.Close the scanner lid.Load unused, plain white paper into the input tray.From the home screen on the product control panel, touch Copy ().Touch Start Black to start the copy.If the copy is clean, continue to the next step to make a copy using the ADF.If the copy has vertical bands, lines, or streaks, there might be dust inside the product, poor internal connections, or the product might be damaged. Please let me know if these steps resolved your issue, or if there is anything else I can do to help. I look forward to hearing from you! Thanks,

OIM-How can i set a password policy which does not contain any space?

How can i set a password policy which does not contain any space?
I put space at Characters not allowed but it is not working.
Can anyone help me out?

You can go to Settings>Messages and turn off Messages. Then go to Settings>General>Restrictions and turn on the the Restriction that prevent changing accounts.
I just verified that it works.

Update structure does not contain any elements error

Dear Friends in am a newbie in WDA. My Function Module has the following decalarations.
TABLES
*"      U_P9006 STRUCTURE P9006
*"      IT_P9006 STRUCTURE P9006
IT_P9006 is used to fill all the values in the Table, if the user wants to create a new entry in the table then he will click on the new button and U_9006 will be used to hold the new value and save in the database.
when i binded U_9006-EmployeeNumber to a Input box to accept values and tested the application dumps giving the error
"Adapter error in INPUT_FIELD "TC_1_EMPLOYEE_CODE" of view "ZHOLIDAY.MAINVIEW": Context binding of property STATE cannot be resolved: Node COMPONENTCONTROLLER.1.ZESS_EDU.1.CHANGING_1.1.U_P9006 does not contain any elements "
i have 3 basic questions please help me.
1. Currently the cardinality of the Node U_9006 is 0..n and Selection 0..1 , i reffered few sdn threads where it says change the cardinality to 0..n and issue will resolve , my issue is cardinality is already 0...n and even if i try to change it at the context tab it is not changing.
2. if map the INPUT BOX a String attribute ctx_employee rather than mapping it to the U_P9006-EmployeeNumber the page does not dumps , but how do i assign this ctx_employee value to the u_9006-employeenumber in the coding?
3. any sample of SAVE code so that on those lines i write SAVE coding and try to update the record.
Regards,
Jack

Jack,
Bind_table , bind_element methods are used to insert records into NODE, not into database table.
As you said you want to insert records into custom infotype, you need to use function modules to create .
For infotype tables we use below function module to insert records
HR_INFOTYPE_OPERATION
DATA return1 TYPE bapireturn1.
DATA: wa_9006 TYPE p9006.
NOW PASS ALL THE VALUES OF WA_9006.
WA_9006-PERNR = LV_EMPID.
    wa_9006-begda = " provide start date'
    wa_9006-endda = ' provide end date
    wa_9006-aedtm = sy-datum.
    wa_9006-uname = sy-uname. ///LY PASS ALL THE VALUES OF P9006 TABLE( CHECK SE11 FOR FIELDS )
THEN CALL BELOW FUNCTION MODULE.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
               EXPORTING
                        infty                  = '9006'
                         number                 = wa_9006-pernr
*                         subtype                = wa_9006-subty
*               OBJECTID               =
*               LOCKINDICATOR          =
                        validityend            = wa_9006-endda
                        validitybegin          = wa_9006-begda
*               RECORDNUMBER           =
                        record                 = wa_9006
                        operation              = 'INS'
*                TCLAS                  = 'A'
*                DIALOG_MODE            = '0'
*                NOCOMMIT               =
*                 VIEW_IDENTIFIER        =
*                 SECONDARY_RECORD       =
              IMPORTING
                      return                 = return1
*              KEY                    =
Hope this will be useful
Regards
Srinivas
Edited by: sanasrinivas on Feb 13, 2012 12:28 PM

Report painter execution error - GR657 - set does not contain any entries

Similar Messages

Maybe you are looking for