Report Painter form issue

Hi
I have changed the form layout in KE85 for one of our report painter report. I have transported the changes to quality. The form changes are appearing as per Development but the screenlayout is not changed.
Is there anything else I should do like import, or generate the report etc. If so kindly let me know the details.
Thanks
N Sankar

Hi Franc
Thank you very much for your valuable input. But my report does not have report group. It is a report created by using a form in KE84. This form is attached to a t_code and the same transported to quality. In quality the form changes are appearing in the form. Whereas when I execute the form changes are not called.
This is what confusing me a lot. Can you please guide me on this.
Thanks
N Sankar

Similar Messages

Unable to create a report painter form (Message no. KH205).

Dear all,
I am trying to create a report painter form, but the system gives an error:
Key figure scheme contains errors -> check definition
Message no. KH205
Diagnosis
Entry not contained in Table T237A.
Procedure
Check key figure scheme (in particular line 9062) in table T237A.
I checked in Tcode KER1 but did not find any Key figure scheme.
Afterwards, I checked table T237A and T237 and found out that number of hits in table 237A is less than in T237A.
I think this is the reason why system has such reaction.
Please help me with this issue.
Best regards,
Linh.
Edited by: tvlinh on Mar 7, 2012 11:22 AM
Edited by: tvlinh on Mar 7, 2012 11:22 AM

Hi,
This issue can occur if you have transported the Key Figure Scheme (KFS) from another system and /or deleted value fields. Has this happened ?
To fix the issue you need to renumber the T237 in the source client executing the function module RKE_FILL_TABLES_T237FF as mentioned in the note 13838.
After this try to create a new form and check if that works. If there are still problems with the existing form/report then the best
way might be to delete and create again
regards
Waman

Report painter currency issue

Hello experts
Situation is like this:
The customer has 3 different company codes which all use different currencies as local currency. They use only one controlling area (Euro).
100=EURO
200=DKK
300=SEK
The report painter report is for their administrative costs. what has gone wrong if i run the report for example all cost centers in company code 200 and cant see the total sum in DKK. I assume that the problem is because there are postings in different currencies.
Could someone tell me how to create a report which shows the total sum clearly in DKK even if there are postings in different currencies. I know that there is S_ALR_87005721 transaction where you can change the currency settings but no success. Plese tell me how to change the formula + any other comments warmly welcome. The postings included in report should be automatically translated to DKK on their posting day currency. There is a challenge for someone.
At the moment i have only one characteristic in Total definition (GRR2):
Variable Description Type Table
1CKSTAR Cost Element Group Set CCSS KSTAR
Thanks in advance.

Hi Gokul,
Your approach is correct, if you wish to display the data in another currency
then as you have described you will need to make a copy of the reports / forms (for
example create a custom form based on the current one) using transactions CJE1
and CJE4 then modify these custom forms by adding new columns for the value in
object currency and by deactivating the columns which refer to the values in controlling
area currency. You can create your own transaction codes for calling these custom
reports (based on the modified forms).
Regarding displaying the values in object currency SAP Note 1925431 provides further
information on this.
BR,
Enrique

Report Painter Performance Issue

Helloo experts,
I have a report painter report which is pulling the data from a custom table (which has 32million records). Its taking a lot of time .
Is there any method to improve its performance ?

Hi,
Please check report painter selecting records using primary key or secondary index. If not please create secondary index for custom table (after consultation with basis, due to creating the secondary index will increase the load on server of custom table with 32 millions records)
If not possible. extract the resultset from custom table into another table and make query for report painter on that. and update the new table on daily basis or hourly basis.
aRs

Create a program, based on a report painter query issue continues

Hi!
I would like to create a program, which contains the same data, what I can get from a report, which is made by report painter in transaction GRR2. The given report is for checking the service orders.
This report has a key (order number) and additional columns, like material cost, personal cost, external service cost, money income, etc...
I found the COSP table, which can be very useful. Unfortunately COSP table contains only the costart (KSTAR) and I don't know, which costarts can be attached to the material costs, which costarts to the services, which costarts belong to the money income, etc...
Could you please tell me, where can I find this assignment?
Thank you
Tamá

Solved, here:
Create a program, based on a report painter query

Hi Report painter division issue

Hi All
In report painter i have a division problem. I am calculationg Gross profit percentage as
Gross Profit % = ( Gross Profit / Sales ) * 100.
So the value should be
GP % = ( 2523302.56 / 14067690 )*100 = 17.93 ( As per calculator )
But the SAP is showing the value as 18.09. Can you please guide me what could be the problem?

Hello Siva Kumar,
Please note that the column formula takes precedence over the row formula as mentioned in the SAP note:140901. Please also check if there are some hidden columns in the report which you can display as follows :
After executing the report >In the menu select 'SETTINGS'-> 'Report Layout' and here select tab 'Columns' > Click on 'Other
Format Groups' and change the column width for the relevant format group. Then you would able to see the hidden columns.
I hope this helps.
Thank you.
Best regards,
Suresh Jayanthi.

Report Painter - Forms

Hi Gurus,
I needed to develop report painter report for WBS element, where I need to compare two plan versions against the actual. The report out put is done.
User need to enter two plan version as input in the selection, for both the plan versions the caption is Plan version I need to change one Plan Version as Plan A and other as Plan B, so that user can select appropriate version plan version for Plan A and Plan B.
How to change it? Please provide instructions on how to achive this......
Thanks in Advance.
Regards
Periasamy

Transaction Grr2
Select report
Insert Plan as a Column, and select which Plan (you can us the icon before the from column to select this in general data selection), possibly with value types (we use 1 & 10)
Insert plan as another new column and follow the same above, but use a different Set for Plan version.
You may need to create a set for each plan version (GS01)

Formulas in report painter - form

Hello,
does anyone know where I can add some formula components in KE35? I want to add some components to calculate new formulas.
thanks a lot!
David

Hi,
Good morning and greetings,
In KE35 click on Extras Menu > Report Parameters > Click on Display Form
For example in Net Revenue line double click to define the formula for the same.
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan

Problem is report painter form defination

Hi Mentors,
i wish to alter the length of the lead column and have to show a lot of columns in my layout form page (But system is giving error that length exceed.)
How to cater this?
Regds,
Sharmi

Hi Sharmi,
For changing the length of the lead column, please go to Menu > Formatting > Report layout > lead column > Length.
For various columns, the standard SAP limitation is that a page can contain only maximum 255 characters, if your columns are exceeding that then you have two options:-
(1) Reduce the length of the various individual columns so that they gets fitted in the same page of 255 characters
(2) Create a new page
Regards,
Gaurav

Difference between Form & Report Painter

Hi Experts,
What is the difference between Forms and Report painter reports? (My understanding is that Forms for PCA and Report painter for Cost Center).
Could also any one provide me the like related to SAP Documents to create Report Painter & Forms reports
Thanks in Advance
Gowsi

<b>Form painter</b> is a term used in SAP Smart form context
http://help.sap.com/saphelp_nw2004s/helpdata/en/4b/83fb48df8f11d3969700a0c930660b/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/4b/83fb42df8f11d3969700a0c930660b/content.htm
http://www.thespot4sap.com/articles/Code_CostCentreReport.asp
<b>Report painter</b>
A tool for creating reports that meet specific business and reporting requirements.
The Report Painter enables you to report on data from various applications. It uses a graphical report structure that forms the basis for the report definition. When defining the report, you work with a structure that corresponds to the final structure of the report when the report data is output.
The SAP System is delivered with several row and column models that can be used as building blocks to help you create reports quickly and simply.
http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7dc143c211d182b30000e829fbfe/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7dc143c211d182b30000e829fbfe/frameset.htm
Regards
Vivek
*Assign points for all the useful answers

Report painter-syntax error form 'SEL-L023' already exists

Hi,
When i copy a report painter form and generate it to the same report group (same as source report) i get an error 'syntax error form 'SEL-L023' already exists. I saw the ABAP code the source and target have same form name.
Where can i change the form name?
Thanks

I will closed this thread as I hv solved my problem already.thks

Report Painter for Non Leading Ledger (Error GH113)

Hi,
Kindly note that we are in the process of enhancing a report for Monthly Balance Sheet as per our client's requirement. The report is based on report painter and we want to add Ledger as an input selection so that the report can be run for Leading Ledger(0L) and for Non Leading ledger(CL)as well .Initially there was no ledger selection and the report ran only for Leading ledger (0L). However when we try to run it for non leading ledger CL it throws an error message GH113 (more than one ledger not allowed in drill down report.)
Our ABAP Consultants have investigated this issue and suggested that for field (RLDNR) ledger the program is picking up "CL" as per input selection , However 0L is also getting captured thereby resulting in conflict and consequently throwing error GH113.
Concern
1) Does this report has a constraint that it can be run only for leading ledger and not for non leading ledger?
2) Apart from report painter form are there any other default setting which extracts "0L" and puts in the report.
Also note that the report painter form settings have been checked thoroughly and ledger has been defined as local variable for input selection.
Thanks

Hi,
Thanks for your quick response. I have already added the ledger as part of report selection and declared it as a local variable so that input selection is possible. but When I select the non leading ledger "CL" and try to execute report it throws error message GH113.
have checked all the settings in report painter form and not too sure as to from where the report is picking up Leading ledger "0L" although as a part of input selection i have selected non leading ledger "CL"
Appreciate your response.
Thanks

Report Painter - cannot hide an element selected for the drill-down report

Dear Experts
I am using report painter to modify a report by trying to hide a row but getting the following error.
You cannot hide an element that you selected for the drill-down list
Message no. K7186
Diagnosis
You cannot hide elements that have already been selected for the drill-d
System Response
The function was canceled.
Procedure
Deselect the relevant row or column from the drill-down list.
It says to deselect the relevant row from the drill-down list, but not able to find out how do i do it.
kindly please help me to solve it
thanks in advance
Suresh

Hi,
If you are asking me whether i am trying to hide the row in the report painter form or in the output of the report, then, yes i am trying it in the report painter.
I copied this standard form '0SAPRATIO-01' for Cash Flow statements-Indirect method(tcode FSI5) and trying to modify the copied one. I tried to hide an existing row but it gave me the above message.
any help?
Suresh
Edited by: rasuresh on Aug 10, 2010 12:44 PM

Cash flow direct method report is generating by using report painter

Dear all
i am preparing cash flow statement direct method report by using standard t.code s_alr_87012271
in this report i am maintain values by using T.code FSI5 in report painter form name 0SAPRATIO-04
there i am maintain GL accounts codes which cells are not having formula
for example second row item Increase in down payments received it contain the formula Z004-z003
and third row character Increase in receivbls frm gds & services it contain the formula z007-z006
where can i maintain formula components and how to create and link the GL Accounts.
please guide me.
Thanking you
Kranthi

Hi Victor,
Cash Flow S_ALR_87012271 is the std cash flow where you have to assign gl. After excuting report. Click on form and assign gl to FORM :- 0SAPRATIO-04 Cash flow (direct).
But it's std format so you will not get the report of cash flow which will show the total inflows and outflows in the bank account as per comapny scenario. For this u have to take ABAP person help to create cash as per comapny requirement.
Nikhil

Report painter - Choosing column heading text

Hi SDN
I'm having a specific problem with getting the right column heading text into my G/L report painter report created in FGI2/FGI5. In the report painter form I have created the three texts for my column (short, medium and long text). In order for the heading to be meaningful I need the report to show the medium or long text. This is also the case when I run the report as object type Object list. Here the medium text is displayed. However, when I run the report as a Classic drilldown report or a Graphical report output the short column heading text is shown.
Now, I know from running the standard report 0SAPBLNCE-01 in FGI0 that it is possible to have the long column header text shown in the report, so I'm not willing to give up. But can any of you guys help me on how to make the report show the correct text?
Kind rgds
Steen Koefoed

Hi Anna and thanks for your suggestion. I have tried changing the header text length in the form as you suggested, but it does not seem to affect the display in neither of the three output types of the report. I assume that there must be a way to control the text header length specifically for each of the three output types. But how....

Report Painter form issue

Similar Messages

Maybe you are looking for