Report painter - GGR2- filter on a characteristic whose value is empty

Hi Experts,
In element defintion, we must filter on a characteristic (C/f level - RCFLEV - Document and Predecessor not Carried Forward) whose value is empty but represent a set of data . The list of values is :
        Document and Predecessor not Carried Forward
     X Document or Predecessor Carried Forward
     U Customer Flag: Document or Predecessor Carried Forward
     9 Cstomer Specification: Number of Carryforwards
The report painter does not allow to exclude certain values. Which solution can you propose to me to filter on Document and Predecessor not Carried Forward?
Thanks and Regards
Fabian

Hi,
Thanks but unfortunately, this solution does not function
The report is based on structure FMRBCS. The basic key figure is HSLT. In the characteristic , I selected c/f level and I encoded '#' in the field u201Cfromu201D and in the field " tou201D but not result. With the value u201CXu201D, I have a result.
I also tested the use of character u201C#u201D for filter on field C/F Level with the transaction se16N on transp. table FMIOI (Commitment Documents Funds Management) mais no values found.
I am interested of all solutions to solve this problem in the report painter.
System : SAP ERP 6.0 - EHP 4
Fabian

Similar Messages

Report Painter, G/L account as characteristic and data selection

Hi experts,
I'm creating a report on report painter (grr1) and i'm using as characteristic gl account. Now i need to use gl account on selection screen too.
So for that I created a variable of set. In selection screen that field is available to set with gl accounts, but when I execute the report, is displayed all accounts. It doesn't respect the selection i've made by account.
For example in selection screen:
Account from: 1200000 account to: 12999999
I execute report and is displayed all set accounts and not only accounts in range 12000000...12999999.
How can I do that selection correctly?
Thanks in advance.
Best Regards,
Cristina Rocha

Hi RD,
At first check the release strategies for errors under the below path :
Spro-MM-Purchasing-Pur.reqRelease ProcedureProcedure with Classification -- Check release strategies.
Rectify the error and also check in CL24N.
Did u check in simulation under the below path :
Spro-MM-Purchasing-Pur.reqRelease ProcedureProcedure with ClassificationSet Up Procedure with ClassificationRelease Strategies--Relase Simulation
Regards
Ramesh Ch

How can I use a report as a filter that accepts a prompt value in R18?

In R17 the following setup worked properly. 1) have a main report that uses another report as a filter report. 2) In the filter report, add a criteria statement which is prompted. 3) pass an argument from a web link or embedded web applet on the report URL using the field reference from the filter report criteria prompt. However, in R18 this no longer works. The filter report does not bring back a set of id's that is used for filtering the main report. The main report just displays all records as if there is no filter criteria supplied. Has anyone else encountered this behavior in R18?

I'm trying to figure out how I can use a simple class
I have written with methods and properties in Sutdio
Creator.
I have been looking around, but I've only found how
to use an EJB directly from Creator. We would like to
use a bean that handles all the connections to the
app server and only returns the result to the JSP.
I know there has to be a way to do this, if anybody
has any ideas please help!I'm not sure I follow 100%, but you can use POJOs via Spring integration. Do a search on this forum for Spring and you should find a tutorial I wrote on it a while back.

Getting Error in Report painter

Dear All ,
i am getting an error after i execute a report in report painter,
Getting the following errors,
Characteristic Ledger does not exist
Characteristic Record Type does not exist
Characteristic Ledger does not exist
Message no. GR655
Diagnosis
The characteristic must (message type E) or should (message type W) be addressed in the report definition. This means that a set must/should exist for the characteristic in the definition of the report rows, report columns, or report selection.
For performance reasons, it is important that you limit the value ranges of those key fields located at the start of the database key as much as possible.
Procedure
Define a set for this characteristic in the report.
Note
In Controlling (Table CCSS), different characteristics (cost center, order, project, etc.) are portrayed internally with a common technical characteristic, "Object". In reports, either a specific characteristic such as cost center must be used, or the characteristic "Object" must be used directly. If this is not the case, an error message appears saying that the "Object" characteristic is missing.
regards
Man

Hi,
define a ledger / record type, (eg in the general data selection).
Best regards, Christian

Planned values of profit centers not showing up in customised report painte

Hi,
I made a customised profit center report via report painter. I have already uploaded planned values in KP06. In the customised report painter, the record type is "1" (plan) and version is "0" for actual/plan. The columns for the planned values do not show any figures. But when I generate std SAP report S_ALR_87013340 - Profit Center Group: Plan/Actual/Variance, it shows the plan values. In that way, I know that the cost center upload is correct.
Please advise on how to show the plan values on the report painter.
Thanks and best regards,
Thess

Hi,
ahhh...the fact that you can see the actual values has made me realize what the problem might be. GLPCP and GLPCA (actual line items) use different fields in regard to the period. I assume that you are utilizing the POPER characteristic to select the periods....correct?
In that case please try the following: copy library 8A3 into the customer name space (I would always base customized reports on your own library). In your copy activate the RPMAX characteristic. The re-create your report based on the new library and make the following changes: use RPMAX in the general selection and only use POPER in the column definition for the actual values. That should work.
Regards
Karl
P.S....hope you bear in mind that such a report is a potential performance nightmare.

Report Painter problem with empty selection variant

Hello,
I use the cost center selection variant for the column definition in Report Painter as characteristic value. This selection variant get only the cost centers which are valid from 1.1.2003 to 31.12.2004. The column of the report created by Report Painter which uses this selection variant display value without taking into account limitations follow from this selection variant. I expect value zero for year fiscal year 2007 in this column, because the cost centers are invalid in 2007 year but the report displays different value. The problem appeared after upgrade from 4.6C to ECC 6.0.
Best Regards
ZD

My problem with Report Painter occurred when I was creating my own report based on 1VK library.
In my example I used in the column definition characteristic Cost
Center, which is determined by selection variant, and Basic Key Figure
equal SWKG-Costs. For system date (18.07.2007) there are no valid
master data for the characteristic Cost Center but when I execute
report for fiscal year 2007 the column display no-zero value without
taking into account value of Characteristic Cost Center. I expected
zero value in this column because there are no postings for Cost
Centers (no valid cost centers were selected) in financial year 2007.
Could you help me with this problem ?

Characteristic wild card in report painter

Dear experts..
I am developing a report painter for PS cost element report with structure CCSS.
I want to create rows with dynamic characteristic and I am thinking of using wildcard in the characteristic variable.
What I am trying to achieve is basically to filter WBS only for those which consist "ABC" in the project number (ABC in POSID). I know it can be achieved in the selection screen but I want the selection screen to be as generic as possible and only filter it at row level.
In the normal functional report we can use '*' as the wildcard but it can not be used in characteristic variable.
Appreciate any enlightenment on how to use variable or set to be able to do this.
Thanks in advance

Hi Alexei,
Welcome to SDN.
You need to give the exact file name. System can not determine file name with wild card.
Hope this will help.
Regards,
Ferry Lianto

Report Painter - Library 7KO - Characteristic WERKS

Hello All -
I am trying to add field WERKS (plant) to my selection parameters for my report painter report.
I had to activate it as a characteristic in the library because it wasn't activate yet.
When I select plants on the selection screen, I get no data, so it must be filtering wrong.
I used a variable for WERKS, which is pointing to reporting table KKBC.
KKBC is the table that library 7KO looks at, so I dont know why it can't find any data with the plant filter.
Does anyone know how to look at a reporting table? This might help me.
Any help would be appreciated.
Regards,
Emmas

Hi,
Try the below steps and check -
1. Add the variable WERKS in General Data Selection after copying the standard report to z-version
2, Add the new report to the report group and generate it again
Regards,
Sridevi

Adding Project Type as a characteristic in CJE1 Report Painter

How do I add the Characteristic/Field "Project Type" to CJE1 Report Painter so the field can be used in reporting?
thank you,
Todd

Hi,
I could not understand "Project Type" exactly, maybe Project Profile or.,.. but you can enhance any charcteristics with using customer enhancement: KAP10001. please check SAP note 454509. Hope this helps.
best regards, Takashi

How to add new Characteristic in Report painter?

Hi All,
My requirement is Create/Modify a Report in Report Painter/Writer which should generate cost information in Controlling Area Currency for all sites (domestic & international) associated to the Project. Earlier same Report is fecthing Object Currency Values for the given Project.
When i tried to add "Controlling Area currency" in place of "Object Currency" characteristic, then from the available characteristics of the FORM/Report, i am unable to find the "Controlling Area urrency".
Please let me know how to get this "Controlling Area currency" characteristic.
Note: This Report is intially developed in Report painter So no ABAP code is present , So People who knows Report painter/Report Writer concepts with Currency translations can helpme out.
Please do the needful as i am new to Report Painter please Give T-codes and any useful links regarding this Multiple Currency handling /Currency conversion concepts of Report Painter.

I am designing the P&L report and I want to split my R&D expenses split down by Internal Orders. Since, I have not seen Internal order field in summary table of new GL..ie., FAGFLEXT table.
I want to know how this can be achieved in the same report in report painter.
I am talking this issue from Report Painter point of view where each report is based on library , which is defined per summary table.(ie., Library can refer to only one table....finding it odd to believe there is no join in reporting tool).....
Thanks and let me know if you want to know more on the issue I am facing.

New Characteristic in Report Painter using table CCSS

Dear all,
Can someone help me add characteristic "Original Business Transaction" COBK-ORGVG into a report painter report that is using table CCSS.
Any help would be appreciated and points will be assigned.
Kind regards to all.
Orestis Chaitas

I am designing the P&L report and I want to split my R&D expenses split down by Internal Orders. Since, I have not seen Internal order field in summary table of new GL..ie., FAGFLEXT table.
I want to know how this can be achieved in the same report in report painter.
I am talking this issue from Report Painter point of view where each report is based on library , which is defined per summary table.(ie., Library can refer to only one table....finding it odd to believe there is no join in reporting tool).....
Thanks and let me know if you want to know more on the issue I am facing.

Report painter add characteristis to a librairy

Hello
Like you know we can add some characteristics in report painter into a librairy.
With transaction GCRT, and OSS note 395894 - Numeric variables in reports, it seems that we can add characteristic into a librairy.
Until now I never saw an example to confirm the process to do it. Is it someone can provide one ?
Thanks for all
Philippe

Hi Julien Girard ,
Could you please check the below link :
http://help.sap.com/saphelp_erp2005/helpdata/en/56/32e339b62b3011e10000000a11402f/frameset.htm
Regards,
S.Manu.

Report Painter - Define characteristic row by group field

I am creating a report using report painter. I wish to define cost element as the characteristice row, by inserting the Cost element group. But the characteristic panel do not have the column 'group' for me to difine; it only consist on the following column:-
Name
SET or Hierarchy on/off
variable on/off
from
text
variable on/off
to
text
More
Explore
how do I insert the column 'group'?
Thank you

Dear Cire,
Tick the "Set" and give the group name
Assign Points if useful
regards
Venkatesh

Report painter- Characteristic can not be maintained with key figures

We have added new characteristic ZZFIELD1 in CCSS report sructure for reporting and selected it in gen. selection list. While running report painter report, it gives an error that ZZFIELD1 cannot be combined with key figures.
Any help to figure out what step is missing will be highly appreciated.
This is a PS report painter report using PS database profile in the selection of parameters for the report
Thanks

The fields we have added is ZZFIELD1 ZZFIELD2 in the PRPS table. And the key figures used in the report is;
AWKG - variance/accrual costs (basic key figure) with characteristic version 0, value type 32, fiscal year and period
SWKG - cost (basic key figure) with characteristic version 0, value type 4, fiscal year and period.
SMEG - quantity (basic key figure) with characteristic version 0, value type 4, fiscal year and period.

Report Painter Adding Characteristic

Hi,
I like to pull real estate (RE) object (property, business entity, contact) to report in Report Painter reporting.
For existing library, there are no such characteristics available. Hence, i create a new library from table CCSS and tried to add the related characteristic to it. Why i can see the fields (eg. SGRNR, OBJNR_IG ..) available in CCSS but cannot see it in GR23 and insert it to my selection ? How to add additional characteristic beside select from the standard given fields ?
Or anyone can tell me which library available with RE information ?
Thank.
Regards,
Oscar

no help..

Report painter - GGR2- filter on a characteristic whose value is empty

Similar Messages

Maybe you are looking for