Report Painter GR214 generation error - Short dump 4.6C

While generating a report with more than twenty sections, the system short dumps with the error message GR214 pointing to "MESSAGE_TYPE_X"
"%_T01JR0 " or "########################################"
"INSERT_ROW_FORMULA_NEW"
Any leads to fix this?
The generation error happens only when I include a last line formula in the last section, Till then it is working fine.

Hi,
The error you are receiving could be caused by a large number of row blocks in your report definition, (you can check the report definition with report RGRRDC00). A report should not contain too many row and column blocks. It is not possible to give an upper bound for the number of row blocks (since the length of the coding depends on other parts of the report as well). However, even a complicated Report Writer or Report Painter report should not contain more than 50 row blocks, and reports with more than 100 row blocks should not be defined.
In this case the report(s) have to be redefined. Please also refer to the note 387916 for further information regarding this issue.
When there are more than 30 variables in a report, please have a look at the note 332091.
Please reduce the number of row blocks in the report by using the function 'Edit' -> 'Rows' -> 'Explode' in the Report Painter
definition. This function enables several rows to be created for one row block (in the Report Painter definition one row block is just one row). Report Painter (and Report Writer) are designed to display hierarchical reports where the rows in the few row blocks are built up using the 'Explode' function.
regards
Waman

Similar Messages

Run time error (short dump) executing program SCAN_BW_REFERENCES in SE80

Hi experts,
I am not an ABAPer, or Basis person, rather a hybrid functional/technical Key User for our Business Warehouse system (BW 3.5, Netweaver 2004). We have a user who cannot save BW reports to his favorites and he is getting a number of error messages. OSS note 887002 seems to address this and indicates that I should run program SCAN_BW_REFERENCES from transaction SE80. The program is supposed to perform the checks for BW objects assigned to the Favorites and identify situations causing terminations in BW frontend applications. I have attempted to execute this program on several occassions and always get run-time errors (short dumps). Here is the error:
Runtime Errors         TSV_TNEW_PAGE_ALLOC_FAILED
Date and Time          2008.09.17 19:00:49
ShrtText
     No storage space available for extending an internal table.
What happened?
     You attempted to extend an internal table, but the required space was
     not available.
I have been informed by our Basis group that I have reached a memory limit, but they will not extend the memory paramters. Any ideas on a work-a-round or a way to minimize the number of records this program is pulling in, in an attempt to get it to run?
Thanks,
HC

Hi,
The only response I got from Basis was that they would not extend the memory parameters because they are for all users in the system. Not sure what that means.
The full dump is too large to paste here. I think what I will do is to see if our ABAPers can create a modified version of this program to include selection by user. Typically it is for only one user that I need to run the program, and that surely would fall within the space requirements.
Thanks for your answer.
//HC

Error (Short Dump) while posting any Material document

Hello All Experts,
I am facing an error (short dump) while doing all material document related transactions (for example MIGO,MB1A etc) . I am getting the below message:-
Short text of error message:
Document number 1000 5000000000 2009 was already assigned
Earlier, I had posted some material documents using the same transactions.
Kindly help
Regards,
Atul

Hi Atul,
Please use T-code OMBT to check the number range status of material document. You can click on the 'Intervals' button to check the 'Current number', the last material document number the system was created so far. Try to change the 'Current number' to a number greater than 5000000001, save the change, and post material document again.
Hope it can solve your issue.
Cheers

Reporting Agent : Alert Monitor Preview - Short Dump

Hi All,
I have some questions related to Reporting Agent :
1.) When I am executing the Alert Monitor Preview, it ends with short dump.
2.) Where to do the settings for Email, Printing and Alert settings so as to send the notifications to the user using the different output options as mentioned above.
Please provide solutions.

Hi Richa,
Chech in txn ST22 for your short dump to analyse the root cause of the error.
See this link for integration of BW Reporting with Alert Monitor.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/031faa90-0201-0010-23b3-a5b88e812d15
Cheers!
Amit

TSV_TNEW_PAGE_ALLOC_FAILED - error -Short Dump - Storage Problems

Dear Gurus,
I am new at SAP Basis, can you please help with the following;
One of our FI System Analyst is running a FI report that gives the followin error:
ABAP runtime errors    TSV_TNEW_PAGE_ALLOC_FAILED
       Occurred on     30.04.2008 at 11:11:14
>> Short dump has not been completely stored. It is too big.
Please help

Is the report a standart report or a custom one?
If custom, then the report might be using too much memory. You have to look into the report to optmize it.

Runtime error-short dump

Hi,
please correct me where i went wrong...
RANGES: r_daterange FOR vbak-audat.
RANGES:GRG_DATERANGE FOR VBAK-AUDAT.
PERFORM CHECK_SELECT_OPTIONS USING DATE_FROM
 DATE_TO
 CHANGING R_DATERANGE[].
if sales order number is the selection criteria
if not salesorder_no is initial.
 clear :wa_vbak, wa_vbfa, wa_costlist_in.
 refresh:t_vbak, costlist_in.
 select avbeln aauart bposnr bnetpr
 into table t_vbak
 from vbak as a
 inner join vbap as b
 on avbeln = bvbeln
 where a~vbeln = salesorder_no
 and a~audat in r_daterange
 and a~kunnr = partner_number
 and b~abgru NE ' ' .
***INCLUDE /VWNA/LINSD_BAPI_INV_GET_INF01 .
*& Form CHECK_SELECT_OPTIONS
 text
 -->P_DATE_FROM text
 -->P_DATE_TO text
 <--P_R_DATERANGE[] text
FORM CHECK_SELECT_OPTIONS USING P_DATE_FROM LIKE VBAK-AUDAT
 P_DATE_TO LIKE VBAK-AUDAT
 CHANGING PRG_DATERANGE LIKE GRG_DATERANGE[].
DATA: WA_DATERANGE LIKE GRG_DATERANGE.
CLEAR WA_DATERANGE.
REFRESH PRG_DATERANGE.
WA_DATERANGE-SIGN = 'I'.
iF ( P_DATE_FROM IS INITIAL ) AND ( P_DATE_TO IS INITIAL ).
ELSEIF P_DATE_FROM IS INITIAL.
 WA_DATERANGE-OPTION = 'LE'.
 MOVE P_DATE_TO TO WA_DATERANGE-LOW.
ELSEIF P_DATE_TO IS INITIAL.
 WA_DATERANGE-OPTION = 'GE'.
 MOVE P_DATE_FROM TO WA_DATERANGE-LOW.
ELSE.
 WA_DATERANGE-OPTION = 'BT'.
 MOVE P_DATE_FROM TO WA_DATERANGE-LOW.
 MOVE P_DATE_TO TO WA_DATERANGE-HIGH.
ENDIF.
APPEND WA_DATERANGE TO PRG_DATERANGE.
clear wa_daterange.
When i execute the code its creating a short dump and the message is :
The current ABAP/4 program attempted to execute an ABAP/4 Open SQL
statement in which the WHERE condition contains an IN itab operator.
The IN itab operator is used with internal tables which
have the following structure:
SIGN(1) OPTION(2) LOW LIKE db_field HIGH LIKE db_field
The OPTION column should contain only one of the following values:
"EQ LE GE CP BT NE LT GT NP NB"
The value " " is not allowed here. Please help me in resolving the error..
Thanks,
Challa

Hi
This will happen when P_DATE_FROM IS INITIAL AND P_DATE_TO IS INITIAL.
You are populating the range table with just sign as 'I' and option is not populated.
change your code to:
WA_DATERANGE-SIGN = 'I'.
iF ( P_DATE_FROM IS INITIAL ) AND ( P_DATE_TO IS INITIAL ).
ELSEIF P_DATE_FROM IS INITIAL.
WA_DATERANGE-OPTION = 'LE'.
MOVE P_DATE_TO TO WA_DATERANGE-LOW.
APPEND WA_DATERANGE TO PRG_DATERANGE.
ELSEIF P_DATE_TO IS INITIAL.
WA_DATERANGE-OPTION = 'GE'.
MOVE P_DATE_FROM TO WA_DATERANGE-LOW.
APPEND WA_DATERANGE TO PRG_DATERANGE.
ELSE.
WA_DATERANGE-OPTION = 'BT'.
MOVE P_DATE_FROM TO WA_DATERANGE-LOW.
MOVE P_DATE_TO TO WA_DATERANGE-HIGH.
APPEND WA_DATERANGE TO PRG_DATERANGE.
ENDIF.
*APPEND WA_DATERANGE TO PRG_DATERANGE.
clear wa_daterange.
Regards
Navneet

Error (short dump) while doing Print review of PO

Freinds,
Business Scenario:We have developed a custom message type for PO output based on standard message type NEU.Also we have created a custom requirement type such taht print as well email output can created by system.
Problem:While doing print preview (via TCode ME23N)of the custom output we manage to see the print preview of PO -->then come back.
But while coming back we get a short dump related to include CL_HANDLE_MANAGER_MM==========CM005.
If any one of you have faced this problem eralier please let us know about the solution.
Regards,
Shailesh Seth

check the OSS note 358293, 548857, 923695

Short dump when I do total or sub total in the ALV report

Hi,
When I do total or sub-total on the currency field in the ALV report, it'll give a short dump like
" The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X)".
 Short text of error message:
 Technical information about the message:
 Message classe...... "0K"
 Number.............. 000
 Variable 1.......... " "
 Variable 2.......... " "
 Variable 3.......... " "
 Variable 4.......... " "
 Variable 3.......... " "
 Variable 4.......... " "
Trigger Location of Runtime Error
 Program SAPLSLVC
 Include LSLVCF36
 Row 2,726
 Module type (FORM)
 Module Name FILL_DATA_TABLE
sometime when I do the page down on the ALV report, the same short dump is coming.
Can anyone help me out.
Thanks
Selva

Hi,
I'm getting this short dump in the standard program.
I'm getting ALV report display perfectly. the problem is, when I do total or subtotal on the currency fields.
2704
2705 ************************************
2706 * Column per Fieldcat Entry
2707 ************************************
2708 ls_lvc_data-value = space.
2709 clear ls_lvc_data-style.
2710 loop at it_fcat_local assigning <ls_fcat>
2711 where tech ne 'X' and no_out ne 'X'.
2712 if l_invisible eq 'X'.
2713 clear l_invisible.
2714 if <ls_fcat>-do_sum is initial.
2715 continue.
2716 else.
2717 clear ls_lvc_data-col_pos.
2718 endif.
2719 endif.
2720
2721 add 1 to ls_lvc_data-col_pos.
2722
2723 assign component <ls_fcat>-fieldname
2724 of structure <ls_data> to <l_field_value>.
2725 if sy-subrc ne 0.
>>>>> message x000(0k).
2727 endif.
2728
in this standard program, I'm getting the dump. the line is mentioned above in the code.

Lenght of report output - Short dump

Hi,
we are trying to execute a report and its going to short dump saying the output length of list is more (than the length of the list). Generally when the list length is more, than the next record should print in 2nd page. But we are getting error. Can some one please help us.
Thanks.

Hi,
First go to Tcode ST22--->chooes ur name--
> Today
and try to find the error in ur report.
other thing based on list o/p define ur list length.
Regards
Gaurav

Short dump while accessing the table

There is a report ppioa0000, when executing the report it is going for short dump, error analysis showing that
when accessing the attributes of dictionary table IOSOPER meaningless values are found.
and ABAP run time error showing that DDIC_FIELD_ACCESS_ERROR
suggest me,
thanks and regards
krishna

The database is damaged, links between SAP dictionary and actual database seems to be broken. Try to use SE14 to adjust database.
Regards

Short dump while accessing the IOSOPER

There is a report ppioa0000, when executing the report it is going for short dump, error analysis showing that
when accessing the attributes of dictionary Table IOSOPER meaningless values are found.
but IOSOPER is a Structure
and ABAP run time error showing that DDIC_FIELD_ACCESS_ERROR
suggest me,
thanks and regards
krishna

closing unable to find answer

How to Fetch Cancelled Jobs info along with the Short Dump Text

Hi Gurus,
I need to develop a report to fetch the cancelled jobs information for the given period. I also need to display the "Error Analysis" part of the Short Dump if it exists.
I am able to fetch the Failed Jobs information and the Job log details using the FM "BP_JOBLOG_READ". But I need to show the "Error Analysis Text" on the report , if there is any Short Dump Exists for the Dump.
Please give me your ideas to fetch the Error Analysis part of the short dump for a given Batch Job Name.
Thanks in Advance.
Best Regards,
Sumalatha

The dump information is in table SNAP. You could identify which dump you want by the date & time of the failed job - let's hope you don't have more than one dump with the same time. If it is ambiguous you could also compare the program name of the failed step with the program name in the SNAP data.
The error analysis texts are in table SNAPT keyed according to which error occurred (which is data element code FC right at the start of the first record in the SNAP data). You will have to expand out the includes, and substitute the variable codes using values from the SNAP data. There is standard code to do this that you could copy - see program SAPMS380.
To find out the details of the SAP process you could run transaction ST22 via the debugger and use the same mechanism.
best wishes
Ed
PS Note these details apply to recent systems I think there may be differences if you go back to before ?2004, but I don't have such a system so can't check. You didn't say what release you have.

Short dump while executing Ztransaction

Hi,
I am doing module pool programming by desinging the screens, handling events and running it thru a Z-trnasaction.
My first query is how do I debug a module pool prg.. so as to understand that the error/short dump is because of my code or due to some other reason ...
My second query is that I am getting a short dump with "DIAG_RFC_EXCEPTION" ... I do have access to SM59 ... do I need to check for some other RFC propeties ??... Is this error related to Basis guys??? & the line where it is dumping is as follows :-
Einzelbildverarbeitung Transaktionsvarianten/Batch-Input/CATT
 call function 'SYSTEM_SCREEN_INPUT'
 exporting
 modul = p_repid.
endform. " %_CTL_INPUT
Thank You,
SB

Hi SB,
One way to debug module pool(Pop-up) is like this :
 Many times we would like to start debugging from a Pop-up screen, but the editor doesn't allow us to do that.
*Instead, we have to start debugging all the way from main screen.
*Enclosed is a 3 line script would allow us to make our edits in a Pop-up.
*Create a file with following code and save it as 'debugger.txt' in your local drive and drag and drop it (from Windows explorer) on to the Pop-up box and the debug mode will be on.
FILE CONTENTSMany times we would like to start debugging from a Pop-up screen, but the editor doesn't allow us to do that. Instead, we have to start debugging all the way from main screen. Enclosed is a 3 line script would allow us to make our edits in a Pop-up. Create a file with following code and save it as 'debugger.txt' in your local drive and drag and drop it (from Windows explorer) on to the Pop-up box and the debug mode will be on!
Code: (File Contents)
[FUNCTION]
Command=/H
Title=Debugger
Type=SystemCommand
Hope this will help you to find out the error while debugging the pop up .
Cheers
Sunny

Short Dump in rfc call in background

Hi All,
I am getting an RFC error short dump in a background program the short dump message says "RFC_ERROR_SYSTEM_FAILURE: no system found in another group for import queue", the same RFC works fine in foreground and in another background program. I looked into the target system, there is no dump generated.
I tested it in one system it works fine but in another it generates a short dump. I am trying to understand why this is happening any inputs are welcome.
Thanks in advance,
Barjinder

It has been resolved the called FM was raising an exception and it was not captured in the calling FM.
Thanks to all.

Short dump during ME23N transaction due to missing field in KOMP table

Hi All,
We have just upgraded to Business Suite 7.0 and are experiencing the following error:
Short dump during processing of transaction ME23N - error is in program SAPLV61A when the system calls the following field: KOMP_SERVICE_PARAM2 (this does not exist in KOMP). We need to get this resolved as soon as possible, It appears that SAP have removed this field from the table KOMP but the standard programme is still looking for this field. Can anyone provide an oss note number or insight into how to resolve this issue please.
Many Thanks
Amanda

Dear,
This problem is caused by a missing initialization of the structure KOMP in the program SAPLV61A.
The problem may also occur during , when the "Create PO automatically" indicator (TVAP-ALEKZ) is set for the relevant item category in the item category Customizing (transaction VOV7). In this case, the data of the purchase order item that was previously processed is used for the back update of the sales order from the purchase order in KOMP.
Add the following import parameter to the function module RV_KONV_SELECT:
    Parameter name        COMM_ITEM_I
    Typing          LIKE
    Associated type            KOMP
    Optional        X
    Pass Value       X
Please refer the OSS note 1261566.
Regards,
R.Brahmankar

Report Painter GR214 generation error - Short dump 4.6C

Similar Messages

Maybe you are looking for