Report Painter GRR1, no returning values
Hello,
I'm creating a report using report painter (GRR1). I need to do a Balance report, so i've been creating set's for GL account ranges. For example:
Set 1: from: 2781174000 until: 2781176999
Set2: from: 4300000000 until: 4399999999
I'm building my report using that set's in lines.. explode them and 'Til here everything is ok.
But when i execute my report, is only shown the lines (set's) that cointains amounts on the accounts. Set's that DO NOT have any amount (the amount is zero) don't appear in the report.
My question is.. is it possible to display that "empty" lines in report?
Thanks in advance for helping me.
Best regards,
Cristina Rocha
Edited by: cristiniti on Apr 7, 2010 7:30 PM
Hello Christian,
Sorry for bother you one more time.. as you said.. neverending story..
I'm using as characteristic gl account. Now i need to use gl account on selection screen too.
So for that I created a variable of set. In selection screen that field is available to set with gl accounts, but when I execute the report, is displayed all accounts. It doesn't respect the selection i've made by account.
For example in selection screen:
Account from: 1200000 account to: 12999999
I execute report and is displayed all set accounts and not only accounts in range 12000000...12999999.
How can I do that selection correctly?
Thanks in advance.
Best Regards,
Cristina Rocha
Similar Messages
-
Create New-GL Profit Center P/L by Report Painter (GRR1)
Dear CO gurus
I'd like to create P/L by Profit center level (New-GL, not EC-PCA).
As a solution, I'd like to use CO report painter (GRR1), instead of new-gl's drill down report painter FGI3.
I could create library by referrencing to FAGLFLEXT.
But when I goes to GRR1, it is difficult to create report.
So, if anybody tells me the detail step or reference side, please let me know.
YoshiHi Yoshi San
Process in GRR1 remains same whether you choose 8A library or ora New GL Library
Fgi3 is for drildown reports and GRR1 is for normal reports
What problemproblem are you facing in grr1?? The process is same as for other reports
Br. Ajay M -
In report painter GRR3 1VK Actual Value picked up from previous year
Dear Experts,
In report painter GRR3 > 1VK
1. Column of Actual Quantity to take in Basic Key Figure from Statistical Quantity
2. The value is 4 (Actual) and Version is 0
I found that the Actual value appeared are actually taken from the previous fiscal year. I have checked the line items and their document posting date it shown as last fiscal year.
In this case, where should I amend to have the report pick up only actual value of this fiscal year? or Is there any value to maintain for GRR3 to pickup the current fiscal year actual posting?
Thank you very much and Best Regards,
Annehi..
Goto GRR3 > click on Lib 1VK it will show you all the report in 1VK library > select your report & double click on it
It will display the report format. Then go to Edit at the top. you will find General data selection.click on it you will find available characteristics. Then goto GRR2 for making any change/selection for Fiscal year char
If your report is a standard one you can not change. then copy the report from GRR1 and make the changes.
You can also see the char in GR23 by selecting 1VK lib.
kkumar
Edited by: kkbdsp on Mar 11, 2011 9:21 AM -
Filter option in Report Painter GRR1
Dear Experts,
I have created a report using the the T code: GRR1. The layout is as follows
Expenditure
Department A
Department B
Department C
Department D
Department E
Power & Fuel
Other expenses
Each department having 20 cost centers. I have created the report and assigned in 1SIP report group.
I am able to get the results in the report S_ALR_87013611.
I am able to see the department wise costs in that report.
My Requirement is:
I am expecting a filter in the departments mean to say I want to select few cost centers in the department A after executing the report.
I am expecting a filter in the column heading.
Is it possible. Please guide me.
ThanksDear Experts,
Thanks for your responses,
I hope my requirement is some what critical through report painter (Filter Option).
Please check the following, is it feasible?
Expenditure
Department - A
Department - B
Total - 20 cost centers
Total - 10 cost centers
Cost center
Rs
Cost center
Rs
Salaries
Cost center A1
1000000
Cost Center B1
700000
Tours & Travel
Cost center A2
200000
Cost Center B2
140000
Machine Expenses
Cost center A3
6000000
Cost Center B3
4200000
Repairs & Maintenance
Cost center A4
70000
Cost Center B4
49000
Labour
Cost center A5
800000
Cost Center B5
560000
Total
8070000
5649000
I am going to hard code the cost center group in the cost center report.
I am expecting the report result as mentioned above.
Is it possible.....?
Thanks..... -
Report Painter (GRR1)
Hi there,
Is it possible to have selection to choose either all GL account or GL account with balance in the report painter? something related to supress zeros or not suppress zeros. Please advice.
Thanks.Hi ShantiT,
To suppress zero rows follow the steps below:
1. Go to t-code GRR2
2. Select and Double click the report in the library
3. Go to Formatting menu and choose Report Layout Sub-menu
4. Go to the Rows tab
5. Choose hide zero rows
6. Save
To suppress zero columns:
1. Go to t-code GRR2
2. Select and Double click the report in the library
3. Go to Formatting menu and choose Report Layout Sub-menu
4. Go to the Columns tab
5. Tick the suppress zero columns
6. Save
Thanks.
Edited by: Ellicec on May 13, 2011 10:11 AM -
Standard Report VA05 Adds up Returns Value and Qty :(
Hi Gurus,
We have an issue the standard Report VA05 Adds up Qty and Value of Returns Orders/ Credit or Debit Request which gives up a wrong value when you look at the Total.
I checked up with IDES and it is just the same. Any Help how to overcome the issue
Regards
SKHi
VA05 being a standard order display report it will give you all the order types.
There are 2 ways of doing this.
1. Click on addtional selection criteria button and select the sales document type in your selection. You will only get the order types you want.
2. Run the full report and then filter out the order types you dont want and save that as a variant. You can set this as defualt variant so when your run next time the unwanted order types like Debit memos, etc will not come in the report.
Regards
Yatin Thakkar -
Report Painter GRR1 table CCSS cost centers actual/bud by period wise
Hi,
I have developed Cost Center Actual/Budget Report by period for 12 months (Jan to Dec in columns) in each columan I have hardcoded period e.g. for Jan (01) Feb (02) till Dec (12-12) for one of coulmns given as variable From Period to To Period as vairbale to choose user in selection criteria (1PERIV-1PERIB). while executivng the report system is givng results for whole (12)periods in the output, even my selection criteria from period 1 to 3.
Please advise any body how can I restrict by period wise.. e.g. if I select from period 1-3 it should show for only 3perios.
Thanks in advance!!
VS RaoHi Kumar,
I have done below steps to my CC Report to show by period wise(individual columns Jan, Feb, so..on) cost center report:
Step 1: used Library 1VK, Table CCSS in GRR1.
Step 2: Created 12 individuals columns starting from Jan to Dec..
Step 3: Created 12 formula variables(internal Variables) for 12 periods..(becoz if I hardcoded system is deriving all the
periods)..
a) created Internal value Variable ZVAR(defaualt 01),ZAR1(default 02),ZAR2 (default 03)...this is for to create fomula
variables.
b) for period 1(jan) formula variable "IF '&ZVAR'>= 1 THEN 1 ELSE 017" internal variable table:CCSS,field:PERBL
c) for period 2(feb) IF '&ZVA1'>= 2 THEN 2 ELSE 017 like wise created 12 variables for 12 periods
Step 4: above the formula variables I have selected check box as variable but not coming on selection screen, I need in
selection screen from period to period for this I have created one more hide column and given period vairable "1PERIK"
now its coming on the selection screen but values are not populating based on by selection criteria..
Note: If I slect 1-4 periods it should show for only Jan,Feb, Mar & April and individually..
Please sugget above my formula is correct or not!! appreciate your valuable suggesion!
Thanks
VS Rao -
Report Painter- Cost Center/order value
Dear All.
My user want the report. All the Cost Center value & order value with Cost Element. I developed the same in the system by using the library "1VK". which one is good & working fine.
User also want the value of Expense GL ( Do Not Have Cost Clement, I.e price difference A/C, gain/loss A/C) in onle colmon.
Please help me, how can I add the Expence GL in the report. in the library "1VK". there is no charactertics General Ledger.
Is it PossibleUse FSV based Reporting if your version is >= 4.7EE
Create a FSV.
Use TCODE FGI4 for creating the form.
Use TCODE FGI1 for Creating the Report
Reward if useful.
Sarma -
Dear SAP Expert
Can you help me on below issue?
I developed one CO-CCA report (TC: GGR1)
Data is OK but now I am facing issues in format.
Format Group 0 0
Lead Column Jan Feb
Sale 10,000 90,000
GP 4,000 30,000
GP Margin % 40.00 33.33
The requirement of this report is to view values in scaling of 000 (Thousand)
While executing this report user is using column format scaling in 000 and decimal 0
Implication on report
Amount values are OK (Sales and GP)
but Calulated GP margis is almost showing ZERO due to 000 scaling format option.
I am looking for solution where I can format only selected special rows with decimal 2 format and scaling 1 format
Please assist and advice.
Regards,
PrashantDear Ajay,
Its clear to me that you have understood my requirement and reached near to solution.
Option 1 Change formula by adding 000 - I tried but it will not meet my requirement.
Option 2 Hard Code the scaling option in form defination itself (GRR2) - I checked GRR2 but could able to find option for hard code, can you please assist on this?
Additionally I noticed when I selected row like "GP MARGIN %" and right clicked then I get option NUMBER FORMAT when click this option I get window box option NUMBER FORMAT with sub heading "GP MARGIN %" as FACTOR and Decial Scalling - I selected this scalling but i think it is not getting applied. Possible reason due to column number format leading the settings.
Looking for your advice.
Best Regards,
Prashant Rane -
GRR1 report painter how to explode at GL account level ?
Dear Experts,
I am preparing a balance sheet using report painter GRR1. in the characteristic i assigned the group account number and set as explode. however when i see the report it is exploded at group account number only asterisk level i set is 01. do you guys have any idea how to explode at GL account level? do i need to define asterisk level upto 03 ? if yes how to create asterisk level ?Hi,
For each head like Trade Receivables, Trade Parables, etc, Did you explicitly maintain the GL acct. range by selecting 'Account Number' as Characteristics in that line?
Thanks,
Nirav -
Report painter-want to hide period columns dynamically if the period is not closed
Hi All,
I have made report with 12 columns like JAN, FEB till DEC in report painter (GRR1)
Requirement is that if say, currently only period no.4(APR) is closed and we are in period no.5( MAY) or system date is in MAY, then the report should not show the data for the current period no.5(MAY), eventhough data is there. Or else it should show data for JAN to APR (closed periods)
For this I defined 12 different period formula variables in GS11, based on system paramters like
S008 Year (from Local System Date)
S002 Month (from Local System Date)
S003 Day of Month (from Local System Date)
S012 Current Period in Current Year (per CO Fiscal Yea
But the issue is that eventhough the variable is defined as formula variables, still the default values are given by system and default value only getting passed to the report and thus data is displayed for the unclosed period.
But SAP help says that formula variables are without default values unlike the value type variable.
Any help in this will be highly appreciated.Hi All,
I have cracked it and got the solution with redefining the formula variables.
Details
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
No.of days in each Month
31
28
31
30
31
30
31
31
30
31
30
day number in year
31
59
90
120
151
181
212
243
273
304
334
result available after 15 days
47
75
106
136
167
197
228
259
289
320
350
Formula variable definition for 11 months in current year
ZTPFR01
ZTPFR02
ZTPFR03
ZTPFR04
ZTPFR05
ZTPFR06
ZTPFR07
ZTPFR08
ZTPFR09
ZTPFR10
ZTPFR11
IF '#S005' <47
IF '#S005' <75
IF '#S005' <106
IF '#S005' <136
IF '#S005' <167
IF '#S005' <197
IF '#S005' <228
IF '#S005' <259
IF '#S005' <289
IF '#S005' <320
IF '#S005' <350
THEN 1
THEN 2
THEN 3
THEN 4
THEN 5
THEN 6
THEN 7
THEN 8
THEN 9
THEN 10
THEN 11
ELSE 0
ELSE 0
ELSE 0
ELSE 0
ELSE 0
ELSE 0
ELSE 0
ELSE 0
ELSE 0
ELSE 0
ELSE 0 -
Transaction code for Report painter
Hi Experts,
I have created reports using Report Painter (GRR1).
I want to create Transaction code (TCODE) for reports which was done using Report painter.
Could you please help me how to do this.
Thanks in Advance
Regards
BujjiYou can follow following steps :
1) goto SE93 -> ENter a name for tcode
2)Define the Transaction Code as a Parameter Transaction
3)in the default values for selection-screen block enter the Transaction as 'START_REPORT' .
4)Check skip initial screen , inherit GUI attribute
5)In the default values ->name of screen field, use F4 help to select D_SREPOVARI-REPORTTYPE
6) Against this field ,in the value column Enter 'RW' .
7) again in next row of name of screen field select D_SREPOVARI-REPORT
8) as in step 6 ,enter the name of your report Group to which you haev assigned your Report.
Save and test the TCode.
This should resolve your problem. -
Report painter report can not drilldown
Dear all,
I created a report using report painter(GRR1), the library is IVK.
however, I found that this report can not drilldown to the item details, would anyone tell me am I missing something? thanks.
BenThe fields we have added is ZZFIELD1 ZZFIELD2 in the PRPS table. And the key figures used in the report is;
AWKG - variance/accrual costs (basic key figure) with characteristic version 0, value type 32, fiscal year and period
SWKG - cost (basic key figure) with characteristic version 0, value type 4, fiscal year and period.
SMEG - quantity (basic key figure) with characteristic version 0, value type 4, fiscal year and period. -
General Hierachy in Report Painter
All,
Is it posible to use my own hierachy create in transaction MCK1 in Report Painter ( GRR1 / GRR2 )?
If yes, how can I do it?
Pat.Hi Patryk,
with MCK1 you create hierarchies for MM areas. These hierarchies cannot be used within Report Painter.
Best regards,
Daniela -
No Program generated after creation of new report via Report Painter
Hello,
I have created a new report after copying an existing report from report painter GRR1. The new report has also been assigned to a new Report Group relevant to the same library.
There is no Syntax error. The only change has been to the Title of the report.
However when I am trying to execute the report nothing happens. ABAP found that no program has been generated by SAP for this mew rpeort. We confirmed this by searching with my user ID in table TRDIR.
However there is no trace of it.
We have tried to execute the report from GRR3 & GR53 (report group). The report & report group is having the same attributes as the old one.
Unless the report is in executable stage we are not able to go to the Selection screen & finally from the Technical Information to the program name.
Please could you let me know what can be the possible cause for this & how can we resolve the same.
Thanks & Regards
Shreenath@JoeSchmoe115: Thanks for your suggestion. Using a web service or WCF service would still mean dealing with potential timeouts for very large reports (granted you can adjust those timeouts).
I think an approach using a console app could work, but rather than having the web app spawn it, an alternative would be to do the following: (1) have the web app insert report generation requests (including all necessary report parameters) into
a database table, and (2) have a console app, periodically invoked by Windows Task Scheduler, which reads that database table and then uses the SSRS API as you describe to generate the report, save the byte stream to a file, and finally send
the e-mail notification to the user.
mkedwards
What you've described will work but saving report generation requests in separate table may not be necessary. I don't have much experience with web services but can they just spawn C# console app with needed parameters and exit without waiting for console
app to complete?
The positive side of using database to store report generation requests is that you would have complete log of all requests. Your console app can then update database with completion status.
Maybe you are looking for
-
Why can't I set the Date format in English for Malaysia Region for my iPhone and iPad?
Why can't I set the Date format in English for Malaysia Region for my iPhone and iPad?
-
ORA-00600 during the OracleXE instalation
After the instalation I tried to go on http://127.0.0.1/apex but I got error.Than I found in file xe_ora_600.trc error that you can see below. I examined some directories and found in E:\oraclexe\oradata\XE\ only 2 files "undo.dbf" and "users.dbf", n
-
I downloaded a movie on my apple tv and now when I try to watch it tells me there is an error and to try later. I have tried several times over the last 5 days and nothing changes. Any help please?
-
Process Scheduler - App Engine Help.
We are trying to run an application engine program that produces a simple report as an excel file (.XLS), in the process scheduler when running the program and selecting type EMAIL and format as XLS we are running into some issues. The report gets em
-
Reduce image size by one column/row
I have a image 621 x 400 what Imaq vision VI I need to use to reduce the size by 1 or 2 columns (or rows)