Report Painter - Income Statement Report

Hi SAP Experts,
I'm trying to enhance an existing Income Statement Report (table GLPCT) by adding the PLAN (table GLPCP) columns. Right now, PLAN columns has no data when I execute it.
Report Layout:
Profit & Loss   ACT-2007 ACT-2006  PLAN-2007 PLAN-2006
Here is my current settings.
Gen Data Selection: Company Code - 8A-BKRS
                               Co Area - 0002
Actual Column: <b>Basic Key Figure</b> - BHSL-I
                       <b>Ledger:</b> 8A
                       <b>Record Type</b>: 0 (zero)
                       <b>Fiscal Year</b>: 8A-YEAR (Formula-GLPCT-RYEAR)
                       <b>Posting Period</b>: 8A-PER (Formula-GLPCT-RPMAX)
                       <b>Version</b>: 0 (zero)
Plan Column: <b>Basic Key Figure</b> - BHSL-P
                     <b>Ledger:</b> 8A
                     <b>Record Type</b>: 1 and 3
                     <b>Fiscal Year</b>: 8A-YEAR (Formula-GLPCT-RYEAR)
                     <b>Period</b>: BD-PER (Formula-GLPCP-RPMAX)
                     <b>Version</b>: 8AVERS1 (Value-GLPCT-RVERS)
My objective is to include PLAN figures againts ACTUAL.
Please give me ideas on how to solve it.  
Thank you in advance.
BD
Message was edited by:
        Artemio Datu
null

Hi
Report Writer functions can be accessed from within the Report Painter.
The difference lies in the GUI of the report painter.
For Report Painter
http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/content.htm
For Report Writer
http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7dc143c211d182b30000e829fbfe/content.htm
Refer the following links :
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-other/accessing-tables-using-report-painterwriter-98766
http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
http://help.sap.com/saphelp_bw31/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
<b>Reward points for useful Answers</b>
Regards
Anji

Similar Messages

  • Report Painter for FI reports.... (BS & PL)

    Hi Experts,
    Can anybody here teach me the detail step-by-step procedures on how to create a report in the Report Painter? And what are my look-outs?
    I need to develop a balance sheet report and income statement report thru the report painter.
    Would appreciate your reply.
    Thanks so much.
    jun

    Refer this link:
    http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
    Regards,
    Ravi

  • Income Statement Report from Flat File

    Dear Gurus,
    I'm in the process of creating an INCOME STATEMENT report from Flat File as for my learning purpose , can you please help me where to start in order to create the Flat File and how many KEY FIGURES & CHAR do I need.
    Thanks,
    -Neha

    Hi,
      As this is for your learning purpose, create the fields as per your requirement. Then create info objects of the same type in BI. Then you try to load the info cube from the flat file.
    for example: if my req is to have 4 fields like student name, marks, grade as my info objects. i have create the same fields in the flat file.
    Note: you can create the flat file in excel and save it as csv format.
    Edited by: arthishri on Sep 20, 2010 1:46 PM

  • Income statement report ????

    Hello all,
    I am working on getting an income statement report...
    My revenue elements are coming from table GLT0 and the expense accounts are coming from COEP table... So i am using the 0fi_gl_6 DS and CO_OM_CO_9 DS for the report...
    The KF in the FIGL DS is cumulative balance and in CO_OM_CO_9 is amount...
    If you look at the bex query report...when I'm defining the columns I have to restrict the KF to only one KF...but here i need to get data from 2 KF's , *** balance for revenue elements and Amount for expense elements ??
    Any solutions for this ???

    Question:  In developing an income statement, why are your revenues being developed via multiple datasources?  You should be able to use the GL ds to deliver all necessary data. 
    The revenue postings should be represented via the "revenue" gl accounts, and the expense postings should be represented via the "expense" gl accounts. 
    If your R/3 FI team has configured the Financial stmt version (R/3 GL account hierarchy), you should be able to extract it into BW using the standard ds's.
    Thereafter, you can use keyfigure 0BALANCE (for cumulative balance) and 0SALES (for period activity).
    Please see the help documentation for GL Business Content for more info: http://help.sap.com/saphelp_nw04/helpdata/en/57/dd153c4eb5d82ce10000000a114084/frameset.htm
    Also, income statements can also be performed using Profit Center Accounting (PCA) Business content: http://help.sap.com/saphelp_nw04s/helpdata/en/7a/c3143c26b8bc00e10000000a114084/frameset.htm
    You may find it helpful to review the business content delivered within these areas as a starting point.
    Rod

  • Balance Sheet/Income Statement Report using SSRS

    I am trying to create a balance sheet, income statement report using ssrs. Due to lack of experience, I am seeking some help from someone who has already built one. For the report I am trying to built, the data isn’t readily available
    in a master/detail format. I need to connect to an Oracle DB, run one or more stored procedures (in Oracle) to put data in a temporary/run-time table (reporting table) and read that data to create the financial statement.
    Any help or guidance would really be appreciated.

    Hi Khaga,
    Adding to Vishal's reply, before we can connect an Oracle data source, the system administrator must have installed the version of the .NET Data Provider for Oracle that supports retrieving data from the Oracle database. This data provider must be installed
    on the same computer as Report Builder and also on the report server. To retrieve data from an Oracle database, we can use Oracle or OLE DB data source type. For more details about the connection string, please see the following document:
    http://msdn.microsoft.com/en-IN/library/dd220591.aspx
    Besides, we can refer to the following SSRS tutorial about create a basic report in Reporting Service:
    http://msdn.microsoft.com/en-IN/library/ms167305.aspx
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Report Painter versus ABAP Report

    Hi everyone:
    Can someone tell me what are pros and cons of developing OR Running reports in Report Painter?
    Secondly can someone tell me when should one develop reports in ABAP and when should one develop reports in Report Painter?
    Thanks in advance
    R

    Almost the entire SAP R3 System is written in ABAP u2013 including the Report Painter.
    The Report Painter is a tool for the end user to create evaluation reports without having to involve the IT Department. He therefore has the information he requires within the limitations of the Report Painter very quickly.  No programming involved.
    An ABAP Report has to be written by a programmer/developer. It takes much longer, has to be tested, and, when everything is okay, be transported into the production system. This is time consuming and expensive. The report may have to modified at a later date u2013 again by a programmer/developer, which in turn also costs more time and money.  A report created using the Report Painter can be modified or created immediately by the end user, i.e. low costs, immediate results.
    I hope this clarifies the matter.

  • Report painter: Financial statement debit credit indicator taken into account?

    Hi,
    When I create a report with report painter (FGI0) It does not take into account the debit / credit indicator of the FS statement.
    Is this standard SAP or do I miss a setting?
    kr,
    Klundert

    Hi Wolfgang,
    Please refer to OSS note 663945. This will give you the transfer rule mapping for 0GLACCEXT.
    Hope this helps.
    Thanks,
    Vivek

  • How to  write and what are reports for Income Statement by Region (SD/AR)?

    Hi all,
    I am anticipating  to write some abap reports, I am new to abap..Here is one of them..Anyone can help  me with writing a Report , how to do  'Income Statement by Region (SD/AR)'
    But since I am new to abap , if you wish to reply, please use a little more detail and simple explanation, step by step so I can understand what is the idea, how it can be acheived...what kind of report should be used , techniques, tables etc...:)
    Appreciate your help!
    Regards,
    Boby

    I agree with how you think bugs should be reported. For now, I'd suggest posting them here, in detail. Some of us can relay them to the appropriate places, at least until we hear from Adobe personnel about an official location or method for the average end user.
    Lee Jay

  • REPORT PAINTER DRILL DOWN REPORT

    Hi,
    i need to develop report painter report with drill down for cost elments and month wise
    out should be cost elements and all months
    Please suggest how to use drill down
    Thanks and Regards
      RAVi

    Along these same lines. I have a user that cannot drill down into a drill down report. Let me clarify. This  report does have drill down capability as some people can drill down into it but others cannot. If a user has authorization to run a report via GRR3. When they click on an item to drill down they do not get an authorization error statement, all they get is a statment that says "list contains no data". Any ideas why some can drill down and some can't? Thanks
    Mark

  • Report Painter for Creating Report in Group currency

    Dear all,
    I have created a report using report painter.  I but currently the figures are in Local currency.  May I ask how can I convert these figures into Group currency? 
    Thanks.

    Hi,
    In the characteristics you have defined if you double click you can see on top BASIC KEY FIGURE select Group Currency and the same shall happen.
    Revert for further help
    Regards,
    Rahul

  • Implicit enhancement for report painter (CJE2 & GRR3 reports)

    Hi,
    We have a client requirement to add 5 fields (In selection screen) to report painter reports ( Reports of CJE3 and GRR3 ).We created Z reports as a copy of standard reports, added required 5 fields by implementing SAP notes and other settings.We have also done implicit enhancement for all these reports to make change in the behaviour of new fields.This is working fine in the development client but the problem is once we transport this to other client new reports get generated( With new name ) and implicit enhancement will be lost.
    For eg:in development client for CJE1/CJE2 report the program name will be "GPAVPSATWFP4NN0YRDBIQBHI8MQ"
    but when we transport it to other client new program "GP8O1UCNZTJYY5LTO8GN0UW2GQB" is generated in which implicit enhancements are not found.
    Can you please suggest how to handle implicit enhancement in such cases? Or what is the correct way to transport it.
    Thanks in advance
    Greeshma.

    Hi,
    Thanks for the quick reply..
    I have already done implicit enhancement as you said ,my problem is to transport it to another client.
    I have implemented implicit enhancement for one report lets say it as "ABC", and i transport it to another client with all the enhancement. But in another client new program "XYZ" is getting generated for same report( dynamic programs ), so my implicit enhancement is present but its applicable to "ABC" program but not for "XYZ".
    Can you please suggest how can i handle this??
    thanks in advance,
    Greeshma.
    Edited by: Accgreeshma on Jan 23, 2012 3:04 PM

  • Convert a report painter in a report writer

    Hi.
    How can we convert a «report painter report» into a «report writer report»?
    Thanks,
    Julien

    Hi Julien,
    Can you elaborate your question? and what is the requirement and what is the scenario ?
    Because Report Painter reports are created using Report Writers so i just want to know your exact requirement.
    Regards
    Ajoy

  • Report Painter for GR55 report

    Hi
    I am changing the formula of one cell of one column in report painter type report. what is happening with my report there are FIVE columns of profit center AND one TOTAL column , every column has 10 rows, there are three rows of total revenue , gross profit and % value of , Gross profit / Total revenue. this % figure is correct for above mentioned five columns but for total column , it is adding horizontally all the five % figure and gives the %GP figure , which is incorrect, it should be TOTAL OF GROSS PROFIT / TOTAL OF REVENUE in TOTAL column itself. now formula for total column for total revenue or gross profit are correct as it is adding horizontally and giving the total, but for only one cell of the column that is GP % in TOTAL COLUMN needs to be changed, HOW it can be done ?
    Thanks
    Deepak

    You can not change a particular cell only in report painter.
    Thanks
    Ganesh

  • Report Painter for PP reports

    Hi there ,
    Can any one please help me in learning how we can prepare reports using report painter ... please share with me the any learning document & resource from where I Can learn the same ...
    Secondly, do we use report painter for PP rather SCM reports ... I  have seen in all the cases it is being used in FI reporting ...
    Thanks
    Kaushik

    Dear,
    Most of the PP reports are for internal purpose so we never use the report painter.
    Report painter is available for FI module.
    Report painter is generally used for reporting from totals tables. Your requirement looks more like a query from master data tables. For this you'd better use SAP query (SQ01) or Quick Viewer (SQVI).
    Please refer the below is the links to Report Painter
    http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
    Re: Report painter
    Hope it will clear your doubt.
    Regards,
    R.Brahmankar

  • Report Painter - Transfer of report data to Z-program

    Hello,
    I have created a report painter report for P&L / Balance Sheet.  I want to download the output, but in a specific format.   Is there any customizing option or a user exit or function module which can transfer the output value to a new z-program which can reformat and download the output in new format.  I tried report/report interface option.  But this does not work.
    I read SAP help documentation on SAP queries wherein it is possible to pass the query data to another external program for further processing.    Is it possible in Report painter / drilldown report ? 
    Regards
    Unit

    Hi Alexander,
    I have solved my problem. To send report to Solution Manager, you have to run few jobs in SDCCN of Satellite system. Procedure is as follows:
    Create Refresh Sessions Destinations job and set its destination as RFC back destination to solution Manager and run this job daily. By default, it will be periodically scheduled to weekly. Change its schedule in Tcode SM37.
    Upon Completion of above job, create Refresh Sessions job and run it manually.
    Upon Completion of above job, create Maintenance Package job and run it manually.
    In all of the above jobs, you will find set or have to set destination as RFC back destination to Solution Manager.
    Hope this will solve your problem.
    In case of any problem please revert back.
    Thanks and Regards,
    Naresh.
    Message was edited by:
            naresh dodeja

Maybe you are looking for

  • How to change my password and my incoming and outgoing mail servers

    Hi I have used Outlook Express for years and I know how to configure "everything" I need within the settings pages because their settings pages are all "logical" with everything out in the open. However, Thunderbird "hides" their settings behind butt

  • Error in deploying EJB

    the following error is encountered although I have created the user escappuser in the default realm. Any help ? Unable to deploy EJB: D:\bea8\USER_P~1\domains\EVALGU~1\.\applications\.wlnotdel ete\wlap24823\inv_ejb.jar from inv_ejb.jar: weblogic.ejb2

  • My Ipod Updated to 1.2.1 but my mother is still at 1.1.1

    ok...i went to update my mom's 60gb ipod...with the new software...1.2.1..but it keeps saying in itunes.1.1.1 updated or up to date... i am wondering if the 60gbs ipods with videos are not coming up to date with the 30gbs ipods..any ideas would be gr

  • Director 8 - how do I create a pull down menu

    I have only been using Director for a short while and I am trying to figure out how to create an interactive pull down menu. There would be a title (click on title) then a series of Chapters would show up under the title. By clicking on a chapter (or

  • Can I use the new Captivate6 (subscription) Widget PlayBars and still give control to my learners?

    Hi there,  I want to create some screens that dont have a fixed duration, as I want my learners to explore several 'click to reveal' interactions (eg 4 pictures (buttons) appear) and user can click each picture to reveal some text and pictures, then