Report painter insert line problem

I have one report, many pages, 156 rows, now the requirement is insert five rows at row number 103, five rows including two character and three formula, but after i insert five rows, I need to adjust formula for those rows below the five rows,
is there any method I can insert fornula in the five rows without affecting other rows, thanks.
also i find I have formula ID like Y001, Y002.....Y123 and Z001, Z002....Z134, what does this mean? when I right click this formula ID, I can't see the content, only I can do is check formula, is there any way I can see the content of these formulas?

Thanks,
I didn't chosse the copy function, instead I insert  row 104(other current asset) , but I find the first column (which should be a formula)corresponds to row 104 is empty, and I check all formula ID under formula components, there is no other current asset
formula ID, what should I do?
Row 103(current asset) has a formula ID, but new inserted rows can't find formula ID

Similar Messages

  • Report Painter insert blank line after report header

    Hi Expert,
    I have a problem to insert a blank line (a spacing) after the report header of my customized report painter.
    For example, in standard cost center report, S_ALR_87013611, there is a small box listed information like cost center/group ... and reporting period.
    Right after reporting period, the report header box ends, and there is a space line between it and the cost element data ...
    For my customized report painter, I cannot make this space line.
    I tried edit > row > insert blank line ... but not successful ... kindly advise.
    Thanks and regards,
    -CK

    Hi
    In KKO2 go to output tab, here under layout, tick header and then press pencil symbol and in the editor you write your header. I think this will give you desired result.
    Regards
    Rajneesh Saxena

  • Display items which doesn't  have any posting data in report painter

    I made some reports by report painter. The problem is that when I run these reports, they can't display the items which doesn't have any posting data. But my customers want to display all items whatever it has been posted or not , can you give me the solution?
    BTW, when I made Reports by using Drilldown report, it  display all items
    Thanks and best regards!

    In the change report screen in GRR2 go to menu
    Formating--> report layout
    There in the rows tab select the radio button, Print Zero rows
    and in the columns tab select Print Zero columns radio button,
    hope this should solve the problem
    Thanks
    Naveen

  • Description of GL are not showing in Report Painter

    Hello,
      Friends I've made the trail balance in report painter but my problem is the GLs description under lead column are not showing. I checked the lead column and kept the radio button on key and description under report layout but sill its not working. Please suggest...
    Quick reply will be more appreciated.

    Hello sayujya Patil,
    Thanks for your reply, i have created report in Report Painter, after execution the report i tried in all the parameters under setting menu > report and section layout as well> lead column --> and kept the radio button on key and description, still its not showing the description of the GLs under lead column....
    Please reply...
    Thank You.

  • Report-Painter: 2 Data sources in 1 Report

    Hello members,
    I want to read in one step from database and archive simultaneous in a report, created by report-painter.
    The problem is, the checkbox can not be enabled for both sources (archive + database) together.
    Or, is it possible to transfer to extracts in one and read in the report?
    Greetings
    Carsten

    Sounds like a master-datail. Add your detail-query to the data modell and link them with the master (via the project-identifier). Then you can put a repeating frame inside the projects repeating frame which connects to the detail query and place there your wished items. The graph can then be added via the appropriate tool in reports builder.
    Regards
    Rainer

  • Report painter Sets

    Hi friends,
    I have a query regarding report painter using single dimension sets.What i need is to create financial report for  Mexico and  Spain. The financial statement verision or the reporting structure of GL accounts is different in both these FSV's.
    So if the user selects a particular financial statement version, say MEX for Mexico in the report painter general data selection the report should display  as per MEX structure.
    I think its possible to declare single dimension sets FSV1 with basic set as assets,liabilites..and so on as per financial statement version of Mexico.
    Similarly another FSV2 as per financial statement version structure of Spain.
    But how the system will select the required set based on the FSV selected by the user? Is it possible to give two sets in single report painter  row line item?
    Hope i am clear, please correct me if i am wrong.
    thanks
    Nellikka

    If you create the entirety of the account reporting hierarchy within the single dimension sets, you could be sure that the set is also defined in the reporting row as a hiearchy and variable with one of the sets as a default.
    When the user goes to execute the report, or via reporting variants, they can simply replace the default MEX single dimension set with Spain's single dimension set and it will utilize that to drive the hierarchy of the same row.
    If for formatting purposes, however, you need to break that out into multiple report rows, then this becomes slightly more challenging.  As long as you can at least keep the highest groupings of major accounts, though you can do it even if it means having multiple single dimension sets to default and have for replacement when executing the report (or via the program variant).
    This all assumes the use of Report Painter (GR55) for execution and not the FI Financial Statement Version.
    I hope I've understood and helped.  (Please assign points if so).

  • Report Painter / Writer - Horizontal Line

    Hi
    Can anybody please let me know how to get a horizontal line after a particular row in a report painter/writer report.
    this is very urgent!!
    helpful answers will be rewarded!!
    raghav

    Hi there.  This is from SAP help:
    On the Create Report: Rows screen, move the cursor to the row set for which you want to enter characteristic information and choose Edit --> Choose.
    The Row Characteristic dialog box appears. You can switch between characteristics using the Prev. characteristic and Next characteristic buttons.
    Enter data in the Totals display group box as required:
    The Totals display fields allow you to enter a number range of levels and then:
    - Underscore or overscore with single or double lines or format characters at these levels.
    - Insert additional blank lines between levels.
    - Highlight lines between levels.
    - Define colors for lines.
    Set the Lower border indicators depending on how you want the lower border for the row characteristic totals to appear. You can define the lower border so that no lower border appears, a single line appears, a double line appears, or a user-defined character is used for the border.
    Set the Upper border indicators depending on how you want the upper border for the row characteristic totals to appear. You can define the upper border so that no upper border appears, a single line appears, a double line appears, or a user-defined character is used for the border.
    I hope this helps.
    - April King

  • Report Painter - Totals are different on face of report & line item details

    Hello,
    We have a report designed in report painter. Thye lIbrary table is GLPCT.
    When we run the report system gives e.g. 100 $ on face of report. However when we double click on that line to get a line item details reoprt the value is different. It is either less or more than the amount diaplayed on initial report.
    Please can you suggest what coule be the probable reason for this anamoly.
    Thaks & Regards
    Shreenath

    Hi Sreenath,
    when you double-click on a line you are jumping to another report.
    The report you are jumping to has either been defined as a linked report by you, or it has been copied from an original SAP-report if you started the creation of your report by copying a standard SAP report.
    The sending report tries to pass on all the selections for the cell you double-click to the line-item report. For standard SAP reports it is guaranteed that this should work and the line item report gives the sames results as the report you are calling it from.
    For self-defined reports, this may not always work. I have had problems especially when calling line-item reports from sum-lines of my self-defined report. The reason was that the selections could not be passed on properly.
    Example:
    line 1: selection on account X and profit center A
    line 2: selection on account Y and profit center B
    line 3: sum of line 1 and line 2
    Now, when I double-click on a cell of line 3 and jump to line items, it passes on the selection idependently, i.e.
    accounts: X, Y
    profit center: A, B
    the line item report now gives me all values for all combinations of accounts X and Y and profit centers A and B.
    It does not take into account the combined selections in my original report.

  • Line Items missing in report painter report..

    Hi guri's,
    Iam uisng customized  P&L report painter report using with library 1VK....in this report some line items are not shwoing..... how to solve it...
    regars
    JK

    After you've create a P&L report using the report painter, you would also have to create line item reports for example 'Receiver- Profit Center Line Items'  and then assign these line items reports under 'Report/Report Interface' in the P&L report.
    How to do this:
    1. After creating the line item report(s),  use transaction code GR52 which is for change report group. Enter the P&L report group and click enter.
    2. Under 'Report/Report Interface', click on 'configure' under assigned report to library.
    3. In the pop-up screen, click on the green plus sign "Insert Row"
    4. Another screen will pop-up. Enter the report group for the line items report and enter.
    5. Save
    6. Regenerate your report group. After regeneration, execute.
    7. Drill-down in the displayed P&L report to the line items.
    Don't hestitate to ask for further clarifications.
    Elias

  • Report painter GRR3...Division problem.

    Hi All
    In report painter i have a division problem. I am calculationg Gross profit percentage as
    Gross Profit % = ( Gross Profit / Sales ) * 100.
    So the value should be
    GP % = ( 2523302.56 / 14067690 )*100 = 17.93 ( As per calculator )
    But the SAP is showing the value as 18.09. Can you please guide me what could be the problem?
    Moderator message: not directly related to ABAP development, please post again in the appropriate functional forum.
    locked by: Thomas Zloch on Oct 4, 2010 1:26 PM

    Thanks,
    I didn't chosse the copy function, instead I insert  row 104(other current asset) , but I find the first column (which should be a formula)corresponds to row 104 is empty, and I check all formula ID under formula components, there is no other current asset
    formula ID, what should I do?
    Row 103(current asset) has a formula ID, but new inserted rows can't find formula ID

  • Report Painter - how to insert sub header rows with no values

    In a report painter, I am designing a report with several rows with formulas. I need to insert a sub-header row in the middle of the rows. That will not have a value. It shall contain no value, but I am given only options of either insert a row of characteristics or a formula. I need neither of them. Can we have something excel  like feature in report painter (4.6c) just to insert a sub header row? If so how do we get that.
    e.g
    ADMINISTRATIVE EXPENSES (how to insert this row?)
    Account 1 - 10

    Hi,
    try to add a formular row containing a formular like = +x -x.
    Maybe you can use "formatting / row" and use overscores / underscores to get a blank row (underscore one line, overscore the line thats following).
    No other idea...
    best regards, Christian

  • Report Painter - Adding Total lines on Report

    Hello -
    My client wants to add a single line above all of his sub-totals and a double-line above his grand total.
    I can't find where to do that.
    I think if I were to use report writer and row blocks, I could do it, but not sure about report painter.
    Any help would be appreciated.
    Regards,
    Natalie

    Hello - I don't see Insert Diving Line after I click Insert Blank Line.
    Where is that?
    If I insert a blank line and then double click on the blank line to add a line like the following:  "__________" for sub totals, etc, I can't.  I can only add another characteristic or formula in the blank line.
    Please help and thanks for your help!

  • Report painter problem very urgent

    Hi to ALL,
    I have prepared two reports of cost centre through report painter. The format is proper is both the reports. The set is also correct and values in set(i.e cost centres) are also properly
    but when we execute the report one report is being executed properly while other shows zero values. only when i doubleclick on zero amt and go to plan line items then it shows me values for that particular row in report.
    Why is it so? what is solution to it? can it be possible that my tables are not correct. Ia m using CCSS table.
    Pls this is very urgent
    Thanks in advance
    Tanuja

    Hi
    Can you check one thing...after selecting the zero you are getting the line item...chekc the total of that items...if it is coming zero..then no problem.
    If not you can check in the no.format of that report. If you select the lacs format and your amount is below ten thousand...you will get the zero value only
    VVR

  • In report painter report, line item level drilldown report requirment

    Dear All,
    I created one report in GRR1, when I execute the report i am not getting line item wise drilldown option. For example one cost center no of line itemwise posting ( g/ls wise)posting is there. By double clicking on that specific line item we will go that ledger and see the data available in that ledger.In standard reports that option available but my own reports I unable to go drilldown at ledger level cost reports.
    Please sugget anyone, where I am doing mistake in report creation level.
    Thanks
    M Srinivasa reddy
    Ph : 9637399076

    Thank you,
    I attached reports to Library based on that I am able to drilldown line item level of the report.Is it corret or any other way for line item level drilldown option for report painter reports
    Thanks
    M Srinivasa reddy

  • Report painter performance problem...

    I have a client which runs a report group consists of 14 reports... When we  run this program... It takes about 20 minutes to get results... I was assigned to optimize this report...
    This is what I've done so far
    (this is a SAP generated program)...
    1. I've checked the tables that the program are using... (a customized table with more than 20,000 entries and many others)
    2. I've created secondary indexes  to the main customized table with (20,000) entries - It improves the performance a bit(results about 18 minutes)...
    3. I divided the report group by 4... 3 reports each report group... It greatly improves the performance... (but this is not what the client wants)...
    4. I've read an article about report group performance that it is a bug. 
    (sap support recognized the fact that we are dealing with a bug in the sap standard functionality)
    http://it.toolbox.com/blogs/sap-on-db2/sap-report-painter-performance-problem-26000
    Anyone have the same problem as mine?
    Edited by: christopher mancuyas on Sep 8, 2008 9:32 AM
    Edited by: christopher mancuyas on Sep 9, 2008 5:39 AM

    Report painter/Writer always creates a prerformance issue.i never preffred them since i have a option with Zreport
    now you can do only one thing put more checks on selection-screen for filtering the data.i think thats the only way.
    Amit.

Maybe you are looking for