Report painter issue regarding break up of gl accounts for rows

Hi
I am facing a problem while designing report for balance sheet in report painter. while selecting report format option in formatting option in menu bar system is displaying even zero value rows also. but the problem is for rows which have n number of accounts , it is not showing break up. it is displaying in a single row as a range and its total .
If i go for " print row option" in formatiing in menu bar, then system is not displaying rows with zero balance in accounts . but i am able to get break up over there.
I need both 0 balance rows to be displayed in output as well i need breakup for remaining rows also.
plz suggets me .
Regards
Vijay

Hi vijay kumar,
You need to explode the charactor of Account Number for the item you want to "show break up".
In tc: GR32, double click the item you want to "show break up", system popups the screen for changing charactors values, scroll the horizontal scroll bar to right, you will see the column Explode, change the default value "No explode" to "Explode" for the charactor Account Number and save the report. Then you will see the accounts when you run the report again.

Similar Messages

Drill down value not matching with Displayed Report Painter Issue-GR55

Hi,
Need your help for an issue in drill down value of report painter from actual cost coloumn.
I have created a new report group based on OSS Note-157720 in GR55 Traction. This new report group will provide data of Planed / Actual cost, Planned / Actual Quantity of the project in range of fiscal year/periods. The issue in this report is displayed data of actual cost is not matching with drill down data. The actual cost coloumn is formula coloumn which framed by subtracting All periods cost coloumn, Before Periods Cost Coloumn and After periods cost coloumn.
Could you suggest on this issue.
Thank you for your cooperation.
Regards,
Rakesh

The report you are running first might have been created with some hidden columns that contain more than one variables relating to period and fiscal year. These may not be matching those that are required to run the drilldown. Look into the definition of the drilldown report. If you would want to match the first report, It may be better to identify which report runs on drilldown and the run that report with the required parameters.

Report painter issue with displaing a month budget

Hi,
I have a problem with making report in report painter.
I want to display a month budget of cost element for the one particular cost center.
For example: Iu2019ve putted two characteristics in one row, a set (which contains cost element number) and cost center. In column Iu2019ve placed these characteristics : period, value type and fiscal year.
The main issue is that the report displays only u201C0u201D even when there are some assets on that cost element for that cost center.
Of course when I remove characteristic u201CCost Centeru201D from a row, I will see some non u201C0u201D values in my report. I used CCSS table in my report and KSTAR field in the set.
How can I make report showing assets for cost elements for a particular cost centers? Of course I would like to have more than one such u201Ccost elementu201D-u201Ccost centeru201D pair in my report.
Regards,

Solved

GR55 Report Painter Issue

Hi,
I have an issue in report painter-GR55. Our report in report painter will show planed / actual cost, planed /actual quantity. Our material cost planing is done from cost activity of the project builder. Whereas in the report output , some material quantity is showing as planed quantity for which planed cost of the project is showing wrong. We are picking data from RWCOOM Table. Please advise on this.
Thanks & Regards,
Ranjan

Not possible....SAP standard behaviour....

Report Painter Issue-GR55

Hi,
I have an issue in report painter-GR55. Our report in report painter will show planed / actual cost, planed /actual quantity. Our material cost planing is done from cost activity of the project builder. Whereas in the report output , some material quantity is showing as planed quantity for which planed cost of the project is showing wrong. We are picking data from RWCOOM Table. Please advise on this.
Thanks & Regards,
Ranjan

Not possible....SAP standard behaviour....

GS38 Report Painter issue

Hello Experts,
we are facing issue in Report painting for report GS38. basically there are two requirement
1. TOP WBS new field as selection field.
2. GS38 report is not fetching lower wbs cost in output of this report.
So Can any Expert share his experience for fix it asap?
Regards,
Sanjeev

Thanks Rajesh for considering my thread.
there are clearly mentioned like one field needed in as selection criteria of GS38
which i have done.
and 2nd one GS38 report is not fetching lower wbs cost in output of this report. means if wbs have some hierarchy then report should consider lower level wbs cost also in output of this report.
now cost also is fetching by report if i put value in that set.
but lower level wbs cost should be automatically which is the requirement?
Regards,
Sanjeev

KE30 - Report Painter Issue

Hi All,
I have an issue on report painter report (KE30 Report). Following are the details. Any help on this will be highly appreciated.
I am looking at KE30 P&L report, this report has been built using Key Figure Scheme, formulas for the report have been defined at transaction KER1.
We have formula defined for calculating Variace as Budget - Actual. In the output of the report values of Variaces rows are showing incorrectly.
The problem is.....for example say for Raw Material, budget and actual figures are........
Raw Material Budget = 1000 USD
Raw Material Actual = 500 USD
As per the above formula report should show Raw Material Variance as 500 USD, instead it is displaying -500 USD (minus value).
The above problem persists only for Variances Rows (around 10 rows), report is showing minus value when it should show plus value and viceversa.
Report is good in Quality system, have problem in production system only.
Request your help in resolving the above.
Thanks in advance.
Regards
Anil

Hi Mr Jagannadha Sastry,
Many Thanks for your reply.
I have verified both my Quality and Production systems in both the places radio button for sign reversal is set at NOT DEFINED. Since I have already mentioned my Quality System in working fine. If this is the issue there should be a mismatch in the config setting, hence i don't think this is causing the problem.
Once again thanks for your kind gesture in giving prompt reply.
Request you to pass on if you have some other clues/ideas.
Thanks
Anil

Report painter issue

Hi All,
I need to create a report using report painter.
Requirement goes like this:
1) A report of quantities on a cost center against a cost element.
2)The quantities should be for each month from jan to Dec
I have used SMEG (QUANTITY) as the Basic Key figure.
General Selection:
Version     0
Fiscal year     1GJAHR     Fiscal Year
Value type     4
CO area     0002
Cost center     1KOSET     Cost center group
I am trying to get the quantity (MENGE) booked using F-02 on a cost center.
But my problem is that, against a cost center there are many other quantities booked.
I am not getting the output as my report painter query is not using COEP table and my data is available on COEP table.It queries COSS & COSP
Is there is a way that i can use my report painter queiry this table.
Regards
Rahman

reolved

SAP PS - Report painter Issue

We have some Z report development using Report painter for the project , we call it is project control sheet, it contains many fields along with the commitment values for the WBS.
Z report values differs from the cji5 values..when we drill down to the Z report it actually takes you to the different value.
we had reconstructed the project info record using CJEN. but no use .
CJI5 values are correct but custom report has the issue.
Can you please help

Hi Mandar,
Please check below settings for commitment values.
Name
From
text
to
text
Version
0
Plan/Act - Version
Value Type
21
Commitments from Purchase Requisition
Value Type
22
Purchase Order Commitment
Value Type
23
Reservation Commitment
Value Type
24
Funds Commitment
Value Type
26
Commitments from Transfer Price Agreemen
Object ind.
P
Project item
Object ind.
1
Order plan values: appended, apportioned
9
Order values: not appended, deleted
Debit type
1
Costs and credit-side payments
these values need to set in form or you can use form 12KST1A Costs: Budg/Act/Cmmt
thanks
Sunil

Report painter issue -relating to transactional currency

Hi Floks,
I have seviour problem in Report painter . i copied one existing z report its working on CO currency based i modified little more its comming as transactional currency[GBP,USD,AED] based equivalent to CO currency [USD]. my requirement is Transactional currency based one. i want to print what are the values existing in TRansactional currency i need to display . where i can modify relating to this [key figure ] or new enhancement .........
could please help me out........
Thanks ,
Suresh

Solved

Report painter question regarding amounts in different currencies

Hi,
I have a report created in GRR2 using library 1VK. We display the total costs SWOG here but have the request to see in addition these costs in USD simulteanously. For that I included the basic key figure SWZG. When executing the report there is now a new selection parameter Target currency, Exchange rate date and Exchange rate type. I can see a new column with USD values, so far so good. But when I check the calculation I find that it can't be right, it differs from what it should calculate.
If I execute the report and select currency tranlsation of the key figure SWOG with exactly the same exchange parameters as above I'm getting different values in USD which match my manual calculation.
Any idea why this happens? What do you recommend to have both currencies ate the same time on the screen?
Thank you
Exberliner

hii sanjeev.
try this,
FM - > spell_amount
OR
data: words(50) type c.
call function 'HR_IN_CHG_INR_WRDS'
     exporting
          amt_in_num   = '100000'
     importing
          amt_in_words = words.
write:/ words.
OR
RF_SPELL
rgds
anver

Report Painter issues when trying to spool depreciation retired....

I'm trying to create a report and one of the lines required has to spool the depreciation retired but I can't seem to get this to happen. I have tried using transaction type for retirement but it's not working. Any suggestions?

Solved it...
<dataTemplate name="JOINS_TEST " dataSourceRef="DB2">
<dataQuery>
<sqlStatement name="DB2 HUBS">
<![CDATA[     SELECT HBMHBCD
                          FROM EMP012
                         WHERE HBMEXAG = 'E'
                     AND HBMSTAT = 'ACTV'
                ORDER BY HBMHBCD
                ]]>
</sqlStatement>
<sqlStatement name="ORACLE HUBS" dataSourceRef="PMDWTEST">
<![CDATA[
                SELECT TOUCHPT_ID
                  FROM HUB_INFO
                 WHERE EXEL_HUB_TYPE='EXEL'
             AND :HBMHBCD = TOUCHPT_ID
]]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="G_HUBS" source="DB2 HUBS">
<element name="HBMHBCD" value="HBMHBCD"/>
<group name="G_ORACLE HUBS" source="ORACLE HUBS">
<element name="TOUCHPT_ID" value="TOUCHPT_ID"/>
<element name="REG_ID" value="REG_ID"/>
</group> -- PMDWTEST
</group> --- EXDBASETD
</dataStructure>
</dataTemplate>

Hi I have a issue regarding how to find the Account details from BDOC

Hi I am new to Middleware and i am facing a issue.
I have a requirement where i have to find the account details like 'acc id, acc name', etc & the 'transaction status' from the unprocessed BDOCS from CRM to ECC.
Actually the data flows from Oracle - Siebel - Crm - Ecc. Their is no problem from Oracle to Crm but the problem lies btw CRM & ECC.
The problem is we have some un-processed Bdocs fron Crm to Ecc for which for every account details changed a new Bdoc have been created and those changed Bdocs have to be found and we should know the account details (like Acc id, Acc name) & Transaction Status for all the generated Bdocs and get them into one Excel sheet. suggest me for any tables to see the details.
Thankyou,
vamshi

Hi Vamshi,
the BDocs are stroed in tables SMW3_BDOC, SMW3_BDOC1, ..., SMW3_BDOC7. SMW3_BDOC contains the header data of the BDoc, the other tables further information. Getting the informations you want from the BDocs won't be easy, as you will have to map the BDoc structure to the correct ABAP structure depending on the BDoc type.
Having said this I wonder what you are trying to achieve. For example, which state are the BDocs in? Unprocesses, partially processed, failed? What do you want to do once you have the list of BDocs? Check the accounts manually, reprocess the BDocs (all or only some of them), trigger the updates in the source system again? Depending on the answers to these questions it might well be possible that you could simply use the standard tools provided by SAP. The BDoc monitor (SMW01), for example, allows to select BDocs by type, status, queue name. Depending on you MW configuration the queue name might already contain the account ID ans so there would be no need to write a custom report.
Best,
Christian

Report Painter Column Header to display on continuing page

Gods of FICO,
I've report painter issue. When out of a report is printed, and when it is longer than one page..... the column header description is not getting displayed on second page.
how can i show column header description on subsequent pages?
thanks

Hi,
I have the same issue. I have also de-selected the 'Allow row to break across pages' for the whole table but still the table breaks and continues on the next page.
I see that the question has been answers correct but no solution provided. I would appreciate if you could post the solution.
Regards,
Hakan
Edited by: HakanB on 2011-maj-04 00:05

Data not captured in Report Painter

Dear All,
I have created a COPA Report by using the Report Painter,but when I execute the report the system showing as "No records were selected"
Note that all the values are flowing properly in to KE24 report (standard line items report).
I have checked throughly the Report Painter report,but still I could not get the data .
Please help me as where it went wrong in terms of Report Painter.
Regards
Su

Hi
Can be an issue with your Selection Period - Record Type or the Chars you enter in selection screen
Just execute the report with One CHar i.e. Comp code /.Period
You should be able to see the result.. Later on yuo can modify the report
br, Ajay M

Report painter issue regarding break up of gl accounts for rows

Similar Messages

Maybe you are looking for