Report painter: library 1VK does not exist

Hi,
for some reason one of the report painter libraries seems to be missing in the production system.
I was asked to transport the library from our development system, anyone knows where to start and how to do this ?
Thanks in advance !
Rolf

1VK is std.SAP library, U cannt do like that .If so try to create a new one Directly In PROD server.
Regards
Prabhu

Similar Messages

Report Painter Characteristic Ledger does not exist

Hi Experts,
I am trying to create a report GRR1 and for Plan Budget Report in Rows i have given SALES, REVENUE,COST and TOTAL and when i have defined the Columns with period 1,2,3,4,5,6..12 I got the following message when executing the Report.
Characteristic Ledger does not exist and Characteristic Record Type does not exist
Characteristic Ledger does not exist
Message no. GR655
Diagnosis
The characteristic must (message type E) or should (message type W) be addressed in the report definition. This means that a set must/should exist for the characteristic in the definition of the report rows, report columns, or report selection.
For performance reasons, it is important that you limit the value ranges of those key fields located at the start of the database key as much as possible.
Procedure
Define a set for this characteristic in the report.
Note
In Controlling (Table CCSS), different characteristics (cost center, order, project, etc.) are portrayed internally with a common technical characteristic, "Object". In reports, either a specific characteristic such as cost center must be used, or the characteristic "Object" must be used directly. If this is not the case, an error message appears saying that the "Object" characteristic is missing.
Also i would like to know how do i define the selection criteria for executing the report
Please advice a solution for the same
Regards
Rahul

The reason could be having (1) invalid characteristics value or (2) have not properly defined the General Data Section, most likely (1) in this case.
Either way, go to t-code GRR2 to change the report.
In the report row or column, is there an Element (the labels in red color) that does not make sense?
It could still have the correct label names, but double-click and go into "Record Types (from your error message)". Be sure to have the correctly define values attached to each Characteristics.
If all above seems okay, try (From top bar, select) Edit --> General Data Section. Think of this section as the "header data" of the report.
Good luck
AY

S_ALR_87013603 Library 5A1 does not exist

Have run report S_ALR_87013603 2 days ago and this report worked, however when I execute today I get the error message "Library 5A1 does not exist" I have checked in GRR3 and library 5A1 no longer exists, how do I get the library back?
thanks
Ifty

Hi,
you can reimport the library from the source client 000 with the help of the transaction GR29.
Don't forget to set the indicator 'copy with dependent objects'.
Then regenerate the report group belonging to the library using transaction GR55.
Regards,
Greta

Actual Value displayed in GRR3 report painter Library 1VK

Dear Experts,
In report painter GRR3 > 1VK
I have summarized the Consumption according to Cost Centre of each activity types, I have set;
1. Column of Actual Quantity to take in Basic Key Figure from Statistical Quantity
2. The value is 4 (Actual) and Version is 0
Once I run the GRR3 report, there is some figure in that particular column and does not know where to trace the origin of those value. This actual figure appears on current period onwards where actual data does not been distributed on the system yet.
Kindly advice.
Best Regards,
Anne

Dear Ajay,
Im so happy right now I found that the Actual value appeared are actually taken from the previous fiscal year. I have checked the line items and their document posting date it shown as last fiscal year.
In this case, where should I amend to have the report pick up only actual value of this fiscal year?
Thank you very much Ajay
Best Regards,
Anne

SSMA for Oracle 6.0 Cannot connect to Oracle DB reporting "table or view does not exist"

SSMA For Oracle v6.0.0
MS SQL Server Enterprise 64bits v11.0.3000.0
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Symptom:
when connecting Oracle, it reports error "Common Requirement: User does not have required permissions". Then it reports error: "Error occurred while collecting data."
The following is log:
[Generic: Mandatory] [1500/1] [2015-03-03 04:19:29]: SQL Server Migration Assistant for Oracle v6.0.0
[Generic: Mandatory] [1500/1] [2015-03-03 04:19:29]: Starting assembly: SSMAforOracle, Version=6.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Created: 7/22/2014 4:42:22 PM
Last Modified: 7/22/2014 4:42:22 PM
OS Version: Microsoft Windows NT 6.1.7601 Service Pack 1
OS architecture: x64
Processor architecture: AMD64
Current culture: en-US
UI culture: en-US
[Collector: Mandatory] [1500/4] [2015-03-03 04:20:04]: Oracle connection provider: OracleClient.
[Collector: Mandatory] [1500/4] [2015-03-03 04:20:04]: Oracle connection mode: Standard.
[Collector: Mandatory] [1500/4] [2015-03-03 04:20:06]: Oracle server version: '11.2.0.3.0'.
[Gui: Error] [1500/4] [2015-03-03 04:20:12]: LowLevelAdapter.ReadSource : Read Source error: Microsoft.SSMA.Framework.Generic.Collectors.CollectorException: Error occurred while collecting data. ---> System.Data.OracleClient.OracleException: ORA-00942: table
or view does not exist
at System.Data.OracleClient.OracleConnection.CheckError(OciErrorHandle errorHandle, Int32 rc)
at System.Data.OracleClient.OracleCommand.Execute(OciStatementHandle statementHandle, CommandBehavior behavior, Boolean needRowid, OciRowidDescriptor& rowidDescriptor, ArrayList& resultParameterOrdinals)
at System.Data.OracleClient.OracleCommand.ExecuteScalarInternal(Boolean needCLStype, Boolean needRowid, OciRowidDescriptor& rowidDescriptor)
at System.Data.OracleClient.OracleCommand.ExecuteScalar()
at Microsoft.SSMA.Framework.Generic.DbUtilities.SsmaDbCommand.ExecuteScalar()
at Microsoft.SSMA.Framework.Oracle.Collector.OracleObjectCollector.ExecuteScalarToInt(IDbConnection connection, String text)
at Microsoft.SSMA.Framework.Oracle.Collector.OracleObjectCollector.GetCountForExcludedSchemas(IDbConnection connection, IEnumerable`1 excludedSchemas, Int64 version)
at Microsoft.SSMA.Framework.Oracle.Collector.OracleObjectCollector.CountObjects(IDbConnection connection, Int64 serverVersion, OracleCollectionFilter filter, Set`1 excludedSchemas)
at Microsoft.SSMA.Framework.Oracle.Collector.OracleObjectCollector.CollectDataIntoMetabase(XMetabase xMetabase, IDbConnection connection, Int64 serverVersion, OracleCollectionFilter filter, IUIProgressBarProvider progressBarProvider, IUIStopOperationProvider
stopOperationProvider, ICollectionContext context)
at Microsoft.SSMA.Framework.Oracle.Collector.OracleObjectCollector.CreateMetabaseAndCollectData(IDbConnection connection, String xmlConnectionParameters, XNode xFilter, IUIProgressBarProvider progressBarProvider, IUIStopOperationProvider stopOperationProvider,
ICollectionContext context)
--- End of inner exception stack trace ---
at Microsoft.SSMA.Framework.Generic.Workspaces.Default.MetabaseWorkspaceItem.Connect(String connectionParameters, SecureString password)
at Microsoft.SSMA.GUI.Product.OracleToMsSql.LowLevel.AppConnectToSourceOracle.ConnectToSourceStart(Object guiContext)
[Gui: Error] [1500/4] [2015-03-03 04:20:12]: Exception: Error occurred while collecting data.
site: Void Connect(System.String, System.Security.SecureString)
source: Microsoft.SSMA.Framework.Generic.SSMAEnvironment
at Microsoft.SSMA.Framework.Generic.Workspaces.Default.MetabaseWorkspaceItem.Connect(String connectionParameters, SecureString password)
at Microsoft.SSMA.GUI.Product.OracleToMsSql.LowLevel.AppConnectToSourceOracle.ConnectToSourceStart(Object guiContext)
[Gui: Error] [1500/4] [2015-03-03 04:20:12]: Inner Exception #1: ORA-00942: table or view does not exist
site: Void CheckError(System.Data.OracleClient.OciErrorHandle, Int32)
source: System.Data.OracleClient
error code: -2146232008
at System.Data.OracleClient.OracleConnection.CheckError(OciErrorHandle errorHandle, Int32 rc)
at System.Data.OracleClient.OracleCommand.Execute(OciStatementHandle statementHandle, CommandBehavior behavior, Boolean needRowid, OciRowidDescriptor& rowidDescriptor, ArrayList& resultParameterOrdinals)
at System.Data.OracleClient.OracleCommand.ExecuteScalarInternal(Boolean needCLStype, Boolean needRowid, OciRowidDescriptor& rowidDescriptor)
at System.Data.OracleClient.OracleCommand.ExecuteScalar()
at Microsoft.SSMA.Framework.Generic.DbUtilities.SsmaDbCommand.ExecuteScalar()
at Microsoft.SSMA.Framework.Oracle.Collector.OracleObjectCollector.ExecuteScalarToInt(IDbConnection connection, String text)
at Microsoft.SSMA.Framework.Oracle.Collector.OracleObjectCollector.GetCountForExcludedSchemas(IDbConnection connection, IEnumerable`1 excludedSchemas, Int64 version)
at Microsoft.SSMA.Framework.Oracle.Collector.OracleObjectCollector.CountObjects(IDbConnection connection, Int64 serverVersion, OracleCollectionFilter filter, Set`1 excludedSchemas)
at Microsoft.SSMA.Framework.Oracle.Collector.OracleObjectCollector.CollectDataIntoMetabase(XMetabase xMetabase, IDbConnection connection, Int64 serverVersion, OracleCollectionFilter filter, IUIProgressBarProvider progressBarProvider, IUIStopOperationProvider
stopOperationProvider, ICollectionContext context)
at Microsoft.SSMA.Framework.Oracle.Collector.OracleObjectCollector.CreateMetabaseAndCollectData(IDbConnection connection, String xmlConnectionParameters, XNode xFilter, IUIProgressBarProvider progressBarProvider, IUIStopOperationProvider stopOperationProvider,
ICollectionContext context)

Hi Airings,
'ORA-00942: table or view does not exist'
According to the error message, it seems that the migrating table or view does not exist in the database, or SSMA does not have access to it. To troubleshoot the issue, please check the following things.
1. Verify that if the spelling of the table or view name is correct.
2. If the table or view exists but is in a different schema from the current schema where the SQL is executing (in other word, the table doesn’t own by you, but owned by other user), the ORA-00942 error will return too. Resolve this by
explicitly reference the table or view by specifying the schema name (schema_name.table_name).
3. SSMA queries some additional catalog tables that you may not have permission to, please make sure that you grant the account permission to
read sys.mlog$. For more details, please review this similar thread:
Bug in SSMA For Oracle 6.0 for non-dba Oracle user.
Reference:
ORA-00942 Table or View Does Not Exist Oracle Error
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

My Library Column does not exist when I execute a Caml Query

Hello,
I am new to SharePoint programming. I am trying to understand how I can access the documents in a Library Folder and obtain the field values for each document in the container. With this in mind I have pieced together the following code from
various posts that demonstrate how to to this:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using Microsoft.SharePoint.Client;
namespace ConsoleListItemsInFolder
class Program
static void Main(string[] args)
ClientContext ctx = new ClientContext("http://mwp_lenovo");
List DocumentsList = ctx.Web.Lists.GetByTitle("Claims Documents");
CamlQuery camlQuery = new CamlQuery();
camlQuery = new CamlQuery();
camlQuery.ViewXml = "<View Scope=\"RecursiveAll\"> " +
"<Query>" +
"<Where>" +
"<Eq>" +
"<FieldRef Name=\"FileDirRef\" />" +
"<Value Type=\"Text\">/Claims Documents/11111111 Stuart Little</Value>"
+
"</Eq>" +
"</Where>" +
"</Query>" +
"</View>";
ListItemCollection listItems = DocumentsList.GetItems(camlQuery);
ctx.Load(
listItems,
items => items
.Include(
item => item["Title"],
item => item["Claim Number"],
item => item["Policy Number"],
item => item["Policyholder Name"],
item => item["Document Type"]));
ctx.ExecuteQuery();
foreach (ListItem listItem in listItems)
Console.WriteLine("Title: {0}", listItem["Title"]);
Console.WriteLine("Claim NUmber: {0}", listItem["Claim Number"]);
Console.ReadLine();
When I execute the code with the debugger ctx.ExecuteQuery(); throws the following error:
Microsoft.SharePoint.Client.ServerException was unhandled
Message=Column 'Claim Number' does not exist. It may have been deleted by another user. /Claims Documents
Source=Microsoft.SharePoint.Client.Runtime
ServerErrorCode=-2147024809
ServerErrorTypeName=System.ArgumentException
ServerStackTrace=""
StackTrace:
at Microsoft.SharePoint.Client.ClientRequest.ProcessResponseStream(Stream responseStream)
at Microsoft.SharePoint.Client.ClientRequest.ProcessResponse()
at Microsoft.SharePoint.Client.ClientContext.ExecuteQuery()
at ConsoleListItemsInFolder.Program.Main(String[] args) in c:\Users\matt.paisley\Documents\Visual Studio 2012\Projects\ConsoleListItemsInFolder\ConsoleListItemsInFolder\Program.cs:line 37
at System.AppDomain._nExecuteAssembly(Assembly assembly, String[] args)
at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
InnerException:
These columns do exist in the Library as verified in Library Settings. Many of the Library column names contain two words divided by a space. Is this causing the problem? Does SharePoint maintain a less offensive representation of the field
name internally? If so, how can I get it?
If I run this code with only the title, then it runs fine.
I Thank All in advance for any assistance that you can provided.
Regards,
Matt Paisley
Matthew Paisley

Hello
In addition to Geetanjali Arora answer, change also those other columns
item => item["Claim Number"],
item => item["Policy Number"],
item => item["Policyholder Name"],
item => item["Document Type"]
If you don't know the internal name of a column,
go to the list containing the columns
go to "list settings"
scoll down to the "columns" section
click on one of your columns et take a look a the url of the new page, you should found parameter "&Field=" => What is after is your field internal name (the one you should use in your CAML query)
Best regards, Christopher.
Blog |
Mail
Please remember to click "Mark As Answer" if a post solves your problem or
"Vote As Helpful" if it was useful.
Why mark as answer?

Report Painter, GL Set does not have description

Hi Expert,
I want to create Columnar Financial Statement (Profit and Loss Account, and Balance Sheet).
My problem is that my GL under the lead column does not have any GL description shown.
I tried some of the settings for lead column under formatting -> report layout, but does not work.
I use library: 0FL.
My Questions:
1) What table should I use for the GL set creation? I tried the followings already:
FAGLFLEXT-RACCT
GLT0-RACCT
GLFUNCT-RACCT
all not working.
My report lead column are as follows:
7000000 0007000000
7000000 is GL
0007000000 seems like "description of GL 7000000".
Does anyone have any idea of this?

Hi Christian,
Thanks for your reply.
For the GL set creation, do I have any chance to populate the GL description from GL master data?
As in GL set, we can fill in a range of GL, say from GL 7000000 to GL 7100000, then in this case, I can't fill in the GL description, as they are in a range.
Any idea?
Thanks in advance.
Sbmel

Can an iPhoto library that does not exist be recreated from the AlbumData.xml file?

Our iMac hard drive recently got corrupted and we hadn't backed up. (I know, I know, stupid, stupid, stupid. Won't make that mistake again!) The comptuer folk we took it too were able to recover most of the data on the drive, but my iPhoto library was not one of them. I don't have the library - the file is gone. But I do have the AlbumData.xml file. Is there any way to recreate the library from that file alone? I've tried it with iPhoto Library Manager and it wants me to have a default library for which this file is associated. I don't have that. Is there any way to get this data back? Some friends had trusted us with their wedding pictures. (I know, I know, stupid, stupid, and again, stupid. They won't make that mistake again!) I'd really, really, love to get them back if it's at all possible from this one file I do have.
Thanks in advance for any help!

No
iPhoto is a SQL database and you can only create the database (the iPhoto library) using a SQL editor - using iPhoto is the best
The database has many components and all of them must be there with exact names and in an exact structure to work
The only way you could rereate the library is from the photos (depending on the version of iPhoto you had they would have been in the originals or masters folder)
And yes - it is unfortuante but you have learned the most simple and basic lesson of computers - If you do not have a good current backup (I have multiple daily backups plus occasional offsite backups) you will eventually lose all of your data including your photos
LN

Report painter - Default set 010100010001-1 does not exist

Dear Experts,
I have created a report in report painter and I transported (report, report group, variables) thru transport request. while importing into Quality system i was getting errror"Library 1VK: Default set 010100010001-1 does not exist". Then i kept 1 VK library in transport then i moved to Quality system now all standard report are not working properly.
Please advise.
Thanks
Balu

Hi Thanks for your reply
Earlier i was getting the following error when i was importing transpor request (report, report group, variables)
1)"Library 1VK: Default set 010100010001-1 does not exist. "
2)Errors occurred during post-handling G_RW_AFTER_IMPORT for GRW_JOB T
3)The errors affect the following componenets:
4)FI-SL-IS (Information System)
Then I transported 1VK library also (without selection list option) now my standard reports are not working properly
Please advise.
Thanks
Balu

Report group and report library does not exist

Dear Guru's
We are not able to execute the report S_ALR_87013019 in production. After doing analyses, we came to know that library 602 & report group 6OBU does not exist in production, and hence we are not able to excute this report.
We have to tried to import from client '000' from transaction code GR59, But in that we are not getting 6OBU report group.
Please help us to resolve the issue, as we required this report on priority basis.

Dear Prashant,
Thanks for your reply.
The solution given by you is to transport the report library from Dev Client. But our client does not transaport the reports in production system.
Is ther any other solution to retrieve the library.
Thanks
Varsha

Report painter report does not exist after applying support pack

Hi,
I have created report with the help of report painter for FI.
Also created transaction code for the same.
After applying the support pack, while testing I got the error that
program in the transaction code does not exists.
How to search that program and where or I need to create the same program again?
Thanx in advance.
-Umesh

The reason could be having (1) invalid characteristics value or (2) have not properly defined the General Data Section, most likely (1) in this case.
Either way, go to t-code GRR2 to change the report.
In the report row or column, is there an Element (the labels in red color) that does not make sense?
It could still have the correct label names, but double-click and go into "Record Types (from your error message)". Be sure to have the correctly define values attached to each Characteristics.
If all above seems okay, try (From top bar, select) Edit --> General Data Section. Think of this section as the "header data" of the report.
Good luck
AY

Report painter execution error - KH014 "Report does not exist".

Hi All,
I customized one report in FSI3 and used SE43 to create a t code for this report. In the development system, report will be executable from this t code.
Transport requests are successfully transported from development to production without any error. But on production when I tried to execute the report, I am getting the error KH014 - "Report does not exist".
While checking in production I found that the report was missing from report tree in FSI3 and as a result the customized report cannot be executed. As per basis guys there was not a issue in request transportation.
Has anyone encountered similar problem? How was it resolved?
Thanks.
Prashant

Hi Mikko,
Thanks for your reply but your solution is not working.
Hi Stacy,
I can execute the report from t codes like FSI3 & FSI0 in development.
I used SE43 for t code creation. At the time of t code creation there is a option called "Drilldown" under Report type heading, In drilldown option I selected my report from report type 002 (Financial Statement Key Figure) and created the t code. After this I transported both the request to production server.
Please let me know if this is wrong method or there is any other option to transport this report in Production.
Thanks & Regards,
Prashant

SCCM 2012 R2 - Reporting Services Point installation - "The Datasource does not exist"

Hi all,
Quick bit of background, we have SCCM 2012 R2 installed on a Windows 2012 R2 server. We have the SQL back end off box, configured on a SQL 2012 R2 server running on a Windows Server 2012 R2 cluster. Then there is yet another server which runs the reporting
services. I've just tried installing the Reporting Services Point on the srs server but it doesn't appear to have worked that well. Here's the info i've got back:
A] Site Status > Reporting services point:
SMS_SITE_SYSTEM_STATUS_SUMMERIZER
Site System Status Summarizer detected that the availability of the "Reporting services point" role on server "\\NA-SQLR01.in.tna.local" has changed to Failed.
B] The last message from the SMS_SRS_REPORTING_POINT Component Status is "Site Component Manager successfully installed this component on this site system"
C] Here's the first chunk of info which appears in the srsrp.log file:
SMS_EXECUTIVE started SMS_SRS_REPORTING_POINT as thread ID 4204 (0x106C).
This is a SRS Reporting Point Role as SRSRP registry key exists.
Waiting for changes for 0 minutes
Timed Out...
Set configuration
Check state
Check server health.
Successfully created srsserver SMS_
Reporting Services URL from Registry [http://sqlreportserver/ReportServer_SQL2012/ReportService2005.asmx]
Reporting Services is running
The DataSource does not exist.
[sqlserver.local\SQL1] [SCCM_XXX] [ConfigMgr_XXX] [sqlreportserver.LOCAL]
[SQL2012] [1] [] [xxx\SCCM2012Server]
Confirmed version [11.0.5058.0] for the Sql Srs Instance.
System.Web.Services.Protocols.SoapException: The item '/ConfigMgr_XXX' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/ConfigMgr_XXX' cannot be found.~ at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetProperties(String
Item, Property[] Properties, ItemNamespaceEnum itemNamespace, Property[]& Values)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.GetProperties(String Item, Property[] Properties, Property[]& Values)
Extract resource language packs if exists
Loading localization resources from directory [D:\SMS_SRSRP\SrsResources.dll]
Looking for 'English (United Kingdom)' resources
Looking for 'English' resources
Found resources for 'English'
System.Web.Services.Protocols.SoapException: The item '/ConfigMgr_XXX' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/ConfigMgr_XXX' cannot be found.~ at Microsoft.ReportingServices.Library.ReportingService2005Impl.SetProperties(String
Item, Property[] Properties, Guid batchId)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.SetProperties(String Item, Property[] Properties)
System.Web.Services.Protocols.SoapException: The permissions granted to user 'NT AUTHORITY\SYSTEM' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user
'NT AUTHORITY\SYSTEM' are insufficient for performing this operation.~ at Microsoft.ReportingServices.Library.ReportingService2005Impl.CreateFolder(String Folder, String Parent, Property[] Properties, Guid batchId)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.CreateFolder(String
Folder, String Parent, Property[] Properties)
(!) SRS root folder was reported missing
STATMSG: ID=7405 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_SRS_REPORTING_POINT" SYS=sqlreportserver.LOCAL SITE=P01 PID=2120 TID=4204 GMTDATE=Wed Apr 08 08:56:05.349 2015 ISTR0="ConfigMgr_XXX" ISTR1="sqlreportserver.LOCAL"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
WARNING: Could not read registry key HKEY_LOCAL_MACHINE\Software\Microsoft\SMS\MPFDM\Inboxes\ on the server, The operating system reported error 2: The system cannot find the file specified.
WARNING: Could not read registry key HKEY_LOCAL_MACHINE\Software\Microsoft\SMS\MPFDM\Inboxes\ on the server, The operating system reported error 2: The system cannot find the file specified.
Failures reported during periodic health check by the SRS Server sqlreportserver.LOCAL.
Registry change
Waiting for changes for 1 minutes
After this point i simply get the following info messages looping endlessly:
Set configuration
Check state
Check server health.
Successfully created srsserver
Reporting Services URL from Registry [http://sqlreportserver/ReportServer_SQL2012/ReportService2005.asmx]
Reporting Services is running
The DataSource does not exist.
[sqlreportserverlocal\SQL1] [SCCM_XXX] [ConfigMgr_P01] [sqlreportserver.LOCAL]
[SQL2012] [1] [] [XX\SCCM2012Server]
[1] [0]
Confirmed version [11.0.5058.0] for the Sql Srs Instance.
System.Web.Services.Protocols.SoapException: The item '/ConfigMgr_XXX' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/ConfigMgr_XXX' cannot be found.~ at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetProperties(String
Item, Property[] Properties, ItemNamespaceEnum itemNamespace, Property[]& Values)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.GetProperties(String Item, Property[] Properties, Property[]& Values)
Extract resource language packs if exists
Loading localization resources from directory [D:\SMS_SRSRP\SrsResources.dll]
Looking for 'English (United Kingdom)' resources
Looking for 'English' resources
Found resources for 'English'
System.Web.Services.Protocols.SoapException: The item '/ConfigMgr_XXX' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/ConfigMgr_P01' cannot be found.~ at Microsoft.ReportingServices.Library.ReportingService2005Impl.SetProperties(String
Item, Property[] Properties, Guid batchId)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.SetProperties(String Item, Property[] Properties)
System.Web.Services.Protocols.SoapException: The permissions granted to user 'NT AUTHORITY\SYSTEM' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user
'NT AUTHORITY\SYSTEM' are insufficient for performing this operation.~ at Microsoft.ReportingServices.Library.ReportingService2005Impl.CreateFolder(String Folder, String Parent, Property[] Properties, Guid batchId)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.CreateFolder(String
Folder, String Parent, Property[] Properties)
(!) SRS root folder was reported missing
Failures reported during periodic health check by the SRS Server sqlreportserver.LOCAL.
Registry change
Waiting for changes for 1 minutes
Has anyone come across this issue before? Must admit, I'm not too hot on the sql side of things so any advice or suggestions would be greatly appreciated. Thanks in advance!

Hi guys, cheers for the swift response.
Garth, i can access SSRS in IE from the SCCM box and it looks a-ok.
Paul, nope can't say I've done any configuration of reporting services - the whole thing has been set up by the database team. Having had a trundle through Reporting Services Configuration Manager, it seems the Database team have set up SSRS in line with
the walkthrough you posted.
Since i'm not seeing the ConfigMgr_XXX folder appear in SSRS I'm wondering if there's something preventing SCCM from being able to create it. The message
"Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions
granted to user 'NT AUTHORITY\SYSTEM' are insufficient for performing this operation" sounds like the account SCCM is leveraging to perform the install might not have the right permissions in SSRS. Do i need to delegate specific rights to the NT
AUTHORITY\SYSTEM account in SRS perhaps?

Reporting using SSRS not working - logon session does not exist

Hello All,
After installing the 'reporting site system role' and configuring (using MS technet reference guides), I see the report folder under my Monitoring-> reporting->reports folder;
When I click on a report and 'run', I get the following error:
"the default value expression for the report parameter 'usertokenSIDs' contains an error. A specified logon session does not exist. It may already have been terminated"
details:
System.Web.Services.Protocols.SoapException: The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist. It may already have been terminated.
   at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ParameterInfoCollection& Parameters)
   at Microsoft.ReportingServices.WebServer.ReportingService2005.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
Microsoft.ConfigurationManagement.ManagementProvider.SmsException
The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist. It may already have been terminated.
Stack Trace:
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.GetParameters()
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.LoadParameters(IReport report, Collection`1 navigationParameters, IResultObject resultObject)
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerPresenter.Worker_DoWork(Object sender, DoWorkEventArgs e)
   at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
   at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
System.Web.Services.Protocols.SoapException
System.Web.Services.Protocols.SoapException: The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist. It may already have been terminated.
   at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ParameterInfoCollection& Parameters)
   at Microsoft.ReportingServices.WebServer.ReportingService2005.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
Stack Trace:
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.GetParameters()
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.LoadParameters(IReport report, Collection`1 navigationParameters, IResultObject resultObject)
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerPresenter.Worker_DoWork(Object sender, DoWorkEventArgs e)
   at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
   at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
The account I'm using is a domain account with 'full' permissions to compliance security role. I also verified the individual object level permission and it holds good. I'm not sure what I'm missing here.
Any help on this is greatly appreciated. thanks

I talked to a member of the product team and they agree this is not a solution. He has not heard of this issue before and STONGLY recommends that you contact CSS for support. This is the only way this is going to be fixed permanently.
It is my guess that if you ever apply a service pack 2 or other updates to CM12, this problem will re-occur, again this is my guess this will happen again.
Remember that if it is a bug then there is no charge for the support call.
http://www.enhansoft.com/

GB won't open- This is what I get... Path does not exist: /Library/Audio/Apple Loops Index st: /Library/Audio/Apple Loops Index w/out this directory you cannot use the Loop Browser

Path does not exist: /Library/Audio/Apple Loops Index st: /Library/Audio/Apple Loops Index w/out this directory you cannot use the Loop Browser. Then I get this message...
Instrument Library Invalid
GarageBand Ecpects a valid instrument foledr in /Libraty/Application Support/GarageBand
Please choose a valid instrument Library folder or quit and re-install GB
Any solutions?

Is this a new installation of GarageBand or has it worked before on the same computer?
Or have you transferrred your GarageBand from a different computer?
The error message is saying, that your GarageBand installation is incomplete. There are essential foldrs missing in your system library.
Check, if indeed both folders are missing or if only the permissions are set incorrectly.
Your system library (the folder "System" directly on your system drive) should have the following folders inside the folder "Audio", and they need to be readable by the system and by administrators.
And in the folder /Library/Application Support there should be the Instrument Library.
If these folders do not exist (or no longer exist), restore them from your backup- If your GarageBand version is a new installation, the application may not hve been downloaded or installed completely, then reinstall GarageBand.
What is your GarageBAnd version, and how did you install it originally?
Regards
Léonie

Report painter: library 1VK does not exist

Similar Messages

Maybe you are looking for