Report Painter - Library - Error in Transport

Hi Dear experts,
I have three reports built with report painter in the development system and these are associated with a z library. When we transported the objects, the Tcodes associated with these reports have been transportd properly. but the reports and the library is missing in the Production system. Now, if i execute these transactions from Production system, its giving runtime error, because the linked reports are missing ( report GP2D4I7Z2RKMI4QGRR05RUURZ8F100 load program not found) When i check the same report in development, its assigned to a local development class($tmp). But there are a lot of reports with such long names in the $tmp. So its very difficult to find which are the actual objects to be transported.
Is there any easy way to find the reports and transport? And if they contains some includes, do i need to transport them also manually? Is there anything i can do with the library? I couldnt find the transaction to change the library. So how can i transport the library? We have only 3 reports. but i dont know how many other objects are linked with these reports.
Any kind of help is highly appreciable
Thanking you in Anticipation.
Deepak

Hi Raja,
the menu "GR22->utilities->transport->transport request" gives some options like Statndard layout, library, report , report group, key figure, etc. We have one Z library and one Z-report group. I dont know about the other itesm like key figure etc.So which options i have to select and run? ( Iam handling these things for the first time) or do i need to run it for each options?
Could you please explain more...
Thanks & Regards
Deepak K

Similar Messages

Table need to be added in report painter library

HI,
Can't we add any table in report painter library (GR21) like if i add s032 it is accepted by library while 'MARD' is not accepted it gives error Table MARD is not installed in Report Writer.
what is the difference between s032 and MARD table, as both are transparent table. but one is accepted and other is not.
Thanks

Hi
You can't use all tables.see the below lines for it:
Both Report Painter and Report Writer can be used to report on the following tables and tables types:
 Evaluation structures set up in the Logistics Information System (LIS). These structures normally begin with an S or ZF. Several different tables and views within the R/3 System can be added as evaluation structures.
Note: You cannot add cluster tables, such as BSEG.
CCSS is used for Cost Center Accounting (CO-CCA), Internal Orders (CO-OPA), Activity Based Costing (CO-ABC) and for cost element reports in Project Systems (PS).
GLFUNCT is used for functional area reporting in cost-of-sales accounting.
GLPCT and GLPCOP are used for Profit Center Accounting (CO-PCA/EC-PCA).
FILC is used for Legal Consolidations (FI-LC).
COFIT is used for the Controlling Reconciliation Ledger (CO-CEL).
ZZ tables are created for the Special Purpose Ledger (FI-SL).
FIMC is used for consolidations in the Enterprise Controlling module (EC-LC).
GLT0 is used for Financial Accounting (General Ledger) reports by account, company, and business area (FI-GL).
KKBC, KKBE, and KKBU are used for the Controlling Product Costing module (CO-Costing).
reward points if useful
regards
Anji

GR224 Report Painter: Internal error when converting a report

Hi
Using FAGL_RMIGR transaction I've trasferred report 8A3-0010 in a
custom library ZXX. The migration happened without error messages. I've
tryed then to run report FL3-0010 by GRR3 transaction but error message
GR224 appears
Report Painter: Internal error when converting a report
Message no. GR224
Diagnosis
During the internal compilation of a Report Painter report to a
Report Writer report, sets are generated. This caused an error in the
subprogramm GENERATE_ROW_MULTI. The return code was 7.
System Response
The report could not be generated and/or saved.
Procedure
Please call the SAP Hotline and send them this longtext as well as
detailed information describing the circumstances in which this
error
occured.
Please could you help me?
Thanks in advance
Giovanna Scamardella

HI,
SAPNET notes search with GR 224 brings some old (but maybe helpful) notes: 37611, 193392,137231, pls. check.
Best regards, Christian

Report Painter library for Classic GL for creating cost center report

Hi,
I am sure everyone knows what my query is.
I have tried using library GLTO, GLT1, GLT2, CCSS, GLFUNCT but when i am trying to create/execute report using report painter for cost center but no records are selected. I have checked the settings they all are correct as i have run it for another company code, secondly for GL reports using report painter there is no such error.
Regards,
Mohammed Ali Khan.

Hi Christian,
So for the late reply... I already check the Scenario FIN_PCA in assigned to our Ledger...
Are there other ways to generate my report on the report painter? ( Profit center as Column, And GL account and cost center on the row)
Thanks,
JM

Report painter: library 1VK does not exist

Hi,
for some reason one of the report painter libraries seems to be missing in the production system.
I was asked to transport the library from our development system, anyone knows where to start and how to do this ?
Thanks in advance !
Rolf

1VK is std.SAP library, U cannt do like that .If so try to create a new one Directly In PROD server.
Regards
Prabhu

Report Painter:create a transaction, transport DEV to PRD

Dear all,
I have created my first report in GRR1 (Report Painter / Writer), modifying a standard report that uses the library 8A2 (EP PCA).
In all, i created the following objects:
1) report ZRPRT (created with T. GRR1 (Report Painter / Writer))
2) report group Z8XY(created with T. GR51), that contains only this report
3) Account group Z_CO_XY (created with T. KDH1),with the GLPCT table, field RACCT. Z_CO_XY is input parameter as group account, via selection screen, of the report ZRPRT.
Now i would like:
1. Create a transaction to run this report from the mainmenu.
2 Transport everything, from DEV to PRD.
I would like to have everything in a PRD, also for maintenance reasons.
If in the future, i need to modify this report, I would be able to bring everything from PRD to DEV to make those changes (if, in the meantime, the objects were deleted from DEV, for whatever reason)
Please, can you give me an explanation step-by-step what I should do. Any advice is welcome!
Thank you in advance.

Add custom reports to an existing Report Tree (SERP)
For example:
Add custom report to: Project System/Information System/Financials/u2026
Find u201CPS91u201D from SERP
Add a report to PS91
The trick is find the existing report tree related to standard main menu.
Or create a new report tree where you house all custom or selected reports in one place.
May also consider using area menu (SE43): create a structure, for example, to house all custom reports. A useful tool to manage custom/specifc reports

Attachin Custom Table to Report Painter Library

Hi,
Im trying to create a new library in Report Painter (GR21) and attach it to a custom table.
I am getting the error message (GR493) that "the table is not installed in Report Writer - The Report Writer can only report on tables if the attributes of these tables that are relevant for reporting are defined in control tables"
Does anyone know what this means and how to get around it?
Thanks.

Hi,
You need to add the table as a report table in transaction GRCT "Report writer control tables".
Hope it helps!
Regards Rene

Report Painter Display Error

When executing a Cost Centre Z developed Report painter report, The values appearing blank on the face of the report but when drilling down to line item level i can see the value exists. This is not a access/security/authorization error as no crosses on the face of the report.
Please advice
M Khan

but the total lines are not adding to zero. in a another report painter report one of the lines value is not equal to line item total! it is quite a strange behaviour that i have never come accross! any clues?

Creating a new report painter library

Hi all
I have created a z table for the verification of FI-CO values to use with report painter. This table is modeled like the GLT0, the only difference is that my program fill it with the values of secondary cost elements (for production direct costs). So in the table I have records of accounts defined in chart of account and records with only CO elements. I have created the library using GLT0 as template and created the user exit for take the definition of cost elements and FI account in the same process. All work well the only problem is that for the cost element the values aren't displayed also if present in the table.
I supposed in some point the extraction of values is linked to a control of presence of account in FI (SKA1 or SKB1), but I don't find the point.
Someone has some ideas?Thanks
Davide

First, you don't so much want to back up the library, you want to archive the unwanted items. When archiving you should archive to two separate drives because there could come the day when you plug in the single archive copy and the drive doesn't start.
Why not just archive a copy of the library as it is now, then delete the items from the library on the computer? Don't bother making a new, blank library.

Report Painter Library: troubles with new field in the additional structure

Hi, ALL!
I'm creating a new field in the Report Painter table GLFUNCT. Do do it I created my field in the additional structure GLDBZ for GLFUNCT and create an row in the T804C table for new field.
Who has expirience in customizing using T804* tables? What tables should be used and how? I have the following troubles:
- I do not see the new field as characteristic in the library - I don't know the customizing table to set fields from additional structure as characteristic
- in the generated Report Painter program my new field exists but call of filler routine is always disabled
Thanks
Tatiana

Hi Shabitha,
just wondering if you ever found an answer to this, as i'm searching for info on same matter.
Thanks, Regards,
Okan Yarligan

Report painter-syntax error form 'SEL-L023' already exists

Hi,
When i copy a report painter form and generate it to the same report group (same as source report) i get an error 'syntax error form 'SEL-L023' already exists. I saw the ABAP code the source and target have same form name.
Where can i change the form name?
Thanks

I will closed this thread as I hv solved my problem already.thks

Report Painter - Internal error: Invalid offset in APPEND-C

Hello everyone,
We are having the next problem when we generate a new report and include it in a new report group and in a library that works with all the other reports,the next error arises:
Internal error: Invalid offset in APPEND-C GR-211
Anyone Knows something about it??
Thanks,
Raquel

Hi Raquel
in the report definition you use many characteristics in the general selection by using selection variables.
Kindly note that there is a restriction for characteristics in the general data selection - actually only the single values can be
transferred. All these characteristics for which you require 'All values' should be moved to the the rows instead the general data selection.
Kind Regards
davide

Report Painter "Library FAGLFLEXT"

Hello Experts,
Im current making a Income statement report on the report painter.. Using library "FAGLFLEXT" my requirement is to have the Profit Center as the Characteristic on the Column. And the GL account and Cost Centers on the row... But the report shows no balance on the Expense part.
Please advise am I using the wrong Library or the repainter can't deliver such report?
Much thanks,
Jm

Hi Christian,
So for the late reply... I already check the Scenario FIN_PCA in assigned to our Ledger...
Are there other ways to generate my report on the report painter? ( Profit center as Column, And GL account and cost center on the row)
Thanks,
JM

Report Painter - Library 7KO - Characteristic WERKS

Hello All -
I am trying to add field WERKS (plant) to my selection parameters for my report painter report.
I had to activate it as a characteristic in the library because it wasn't activate yet.
When I select plants on the selection screen, I get no data, so it must be filtering wrong.
I used a variable for WERKS, which is pointing to reporting table KKBC.
KKBC is the table that library 7KO looks at, so I dont know why it can't find any data with the plant filter.
Does anyone know how to look at a reporting table? This might help me.
Any help would be appreciated.
Regards,
Emmas

Hi,
Try the below steps and check -
1. Add the variable WERKS in General Data Selection after copying the standard report to z-version
2, Add the new report to the report group and generate it again
Regards,
Sridevi

Actual Value displayed in GRR3 report painter Library 1VK

Dear Experts,
In report painter GRR3 > 1VK
I have summarized the Consumption according to Cost Centre of each activity types, I have set;
1. Column of Actual Quantity to take in Basic Key Figure from Statistical Quantity
2. The value is 4 (Actual) and Version is 0
Once I run the GRR3 report, there is some figure in that particular column and does not know where to trace the origin of those value. This actual figure appears on current period onwards where actual data does not been distributed on the system yet.
Kindly advice.
Best Regards,
Anne

Dear Ajay,
Im so happy right now I found that the Actual value appeared are actually taken from the previous fiscal year. I have checked the line items and their document posting date it shown as last fiscal year.
In this case, where should I amend to have the report pick up only actual value of this fiscal year?
Thank you very much Ajay
Best Regards,
Anne

Report Painter - Library - Error in Transport

Similar Messages

Maybe you are looking for