Report painter - Line items

Hello Experts,
I would like to get a report which gives information for Profit and Loss by profit center and General ledger account number. Could anyone help me with the characteristic values i should use as well as the characteristics themselves so far i have used the Key figures BKSL-I and BKSL-P i want to identify the characteristics i should use to get the relevant selection amounts.
Thank you
Tatenda I H Chaibva

Hi
Report Writer functions can be accessed from within the Report Painter.
The difference lies in the GUI of the report painter.
For Report Painter
http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/content.htm
For Report Writer
http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7dc143c211d182b30000e829fbfe/content.htm
Refer the following links :
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-other/accessing-tables-using-report-painterwriter-98766
http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
http://help.sap.com/saphelp_bw31/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
Regards
Anji

Similar Messages

KE24 line item report ( profitability line item report)

Hi all,
we need sub total sale order wise automatically in KE24 line item report ( profitability line item report) . How can i do for this .
could you please help me.
Regards,
K.Satish
[email protected]

Hi,
Please forward the same to my mail id:[email protected]
Thanks in advance.
Regards,
Prasad

Adding a characteristics to AR Drill down report for line items

I have raised an OSS note on this, but they deem this to be consulting.
I have an AR drill down report for line items
It calls the structure RFRRD20.
I need to add a value into the characteristics so I can use it in the drill down report.
I have appended the structure, added a value in TKAF for the field, and it still does not show.
Has anybody done something similar?
I am sure this is easy, but only when you know how, so if you know how to do it please can you let me know.
thanks
Mark

Hi Mark
    I am also in the same situation where i need to add two characteristics (invoice date, due date) to the AR drill down reports. I added them to the structure and TKAF table as you did, but still could not get them to the drill down reports (FDI5 or FI1).
   From your posts, i see that SAP's response was that it is not possible to add characteristics to AR drilldown reports? Did they mention any reasons or OSS notes? How did you handle your requirement, were you able to work around?
   Your suggestions would be highly appreciated.
Thanks
Vamsi

REM Reporting Point line item with operation number 9999

Dear guru,
I run MFBF with a REM Profile that post Automatic GR and Activities.
I have four operation in the material routing (10,20,30,40)
For the first three operations I want to confirm them with target activities
I define Third Operation with operation number 30 as "Reporting Point Operation" and
set the necessary settings for Reporting Point at Rem Profile.
After the confirmation I check MF12 (display document log information).
I see two reporting point line item : one for operation number 30 and one for operation number 9999
The system update in table AFRU only operation 30.
So I donu2019t know the activities confirmed with operation 10 and 20.
Do you help me ?
Thanks in advance.

Hi dude:
Once I had this problem, and was due to a wrong definition of the parameters used in the formula for calculating the activities in to the operations.
You can chek it in the next path:
IMG route
Production > Basic Data > Work Center > Costing > Work Center Formulas > Define formula parameters for work centers & Define formulas for work centers
Make sure that these parameters are correctly linked to the formulas.
Please, let me know if this info was useful for you.
Regards
Omar Perea

Report: Vendor Line Items

Hello Everyone,
I would like to know, is there any report available with Vendor Line items with P.org and Plant, when i check the report FBL1N, there is no field available for P.org, and Plant field is available but plant is not getting updated.
Actually there are some entries posted with reference to Purchase order (FB60), so my client wanted to get all the Vendor balances (Invoice as well as Payments) in one report with purchase details (P.Org and Plant)
Regards
Sudheer

Hi Iqbal,
Thanks for reply, with this reports which ever you send me, I can not get the detials FB60 line items, I need both documents (purchase related and non purchase related-FB60) in one report.
Thanks

Report at line item level but also for document total for once only

Dear all,
seek for your help for the following issue
There is a A/R invoice with 3 items
There is a report for retrieving the line item level data from inv1, user would also like to add a column to display the Document total , but the problem is, each line item will also display the Document total, any method to only display the corresponding Document total for once only?
Example, for AR invoice number 1234567:
Currently:
No.                ItemCode        Price      Qty    LineItemTotal      DocumentTotal
1234567       Item-A            10           1       10                       100
1234567       Item-B             50          1       50                       100
1234567       Item-B             20          2       40                       100
Requested to be presented as:
No.                ItemCode        Price      Qty    LineItemTotal      DocumentTotal
1234567       Item-A            10           1       10                       100
1234567       Item-B             50          1       50
1234567       Item-B             20          2       40
Thank you very much!!!

Hi,
Try This.....
select T0.DocNum ,T1.ItemCode ,T1.Price ,T1.Quantity ,T1.LineNum ,case when T1.LineNum ='0' then T0.DocTotal else 0 end    from oinv T0 inner join INV1 T1 on T0.DocEntry =T1.DocEntry where T0.DocNum=[%0]
Thanks
Shafi
Edited by: shafi_sunshine on Oct 19, 2011 12:50 PM

Display report : plan line items for internal orders

When running the report with KOBP tcode, although i have some plan cost line items in the order, i have the message :
No plan line items were selected
Message no. KB421
Could anyone advise?
However, the report with KOB1 tcode works well and i have the results as expected for actual line items.

this is may be config issue.
can you explain with accounting entries for said line items and offsetting GL for each line?
regards.
ashok

Cost center report with line items by date

Hi guys,
i need to create a report by date, for cost centers that displays individual line items?,
do u know if there is a bapi or RFC for this?
what tables are related for line items dates?
i already know that coep but this table has period and not by date
any ideas?
tks in advance

Hi,
You can check out std reports like KSB1, KSB2, KSBP, KSB5.
Also check Accounting-> controllong-> Cost center accounting-> Info system-> Reports for cost center accounting-> line items/more reports.
Tables: COSP, COEP, COBK
FM: K_KKB_KKBCS_COST_CENTER_REPORT
Regards,
Amit

Possibilties in KE24 reports(COPA line item reports)

Dear Experts,
i have created one characteristics Agent and same is appearing in ke24 report but description is not coming same with material Group.
my client want to see material group description and Agent code description in ke24 report.
Request you to guide me on the same.
regards
RK

Hi
Try to change the Layout and see if Material Description is available... I am not sure if it is
The purpose of a COPA report is to analyse KPIs like Gross Contr 1, Net Profit of a Product, etc... This purpose cant be served by KKE24, as it just displays the values as posted... So, to me, KE24 does not make much sense
br, Ajay M

Line Items missing in report painter report..

Hi guri's,
Iam uisng customized P&L report painter report using with library 1VK....in this report some line items are not shwoing..... how to solve it...
regars
JK

After you've create a P&L report using the report painter, you would also have to create line item reports for example 'Receiver- Profit Center Line Items' and then assign these line items reports under 'Report/Report Interface' in the P&L report.
How to do this:
1. After creating the line item report(s), use transaction code GR52 which is for change report group. Enter the P&L report group and click enter.
2. Under 'Report/Report Interface', click on 'configure' under assigned report to library.
3. In the pop-up screen, click on the green plus sign "Insert Row"
4. Another screen will pop-up. Enter the report group for the line items report and enter.
5. Save
6. Regenerate your report group. After regeneration, execute.
7. Drill-down in the displayed P&L report to the line items.
Don't hestitate to ask for further clarifications.
Elias

General Ledger report with Op Bal , Trans Line Items and Closing Balance

Hi Experts,
My clients needs a General Ledger report which should show Opening balance and all transactions line items with closing figure in a single report for a fiscal year in the given date range wise. Can I get a report in standard sap. Waiting for your reply.
Thanks in Advance,
Arabinda Parida

Hi Parida,
There is no such report in SAP. Basically all standard report gives line items not with opening and closing balances. Anyway check mentioned transaction which may help to you.
S_ALR_87012309....It is cash journal report. Anyway you can enter GL account get opening and closing balances with all relavent transactions.
Regards
Suma

Report for GL Line item

Hi Experts
There is a report gl line item display for gl accounts which has not been checked
for line item display in master
can anyone name of the report or t code
thanks in advance

HI,
Use transaction S_ALR_87012328....select Account Management under output control and also enter your company code in the screen and then execute....
Regards,
Chintan Joshi

Reporting on DSO for Broker's Statement (Line Item Reporting)?

Dear experts,
I need to create a BW report based on data from FS-CD and ICM for a client in the insurance industry. The report is broker's statement which has in total 3 sections/pages (or in 3 levels). The requirements are as follows:
1. Overview of the total commissions (grouped by different categories) earned by a broker for a specific month
2. When the broker clicks on the "commission group", it will jump to another page showing each commission items of that group
3. Details for each commission item (line item in DSO) can be drill-downed in another separate page
Currently, I have a consolidated DSO for the commission line items. The data will be loaded to an InfoCube followed by a MultiProvider for reporting.
I am new to BI and I assume that I should follow the following approach:
1. Use RRI for the jumps between different details levels
2. Use DSO for reporting the line item on third page
3. Use Report Designer for the layout because the reports are formatted like Balance Sheet
Is it possible that I report on the InfoCube via MultiProvider for the 1st and 2nd levels whereas DSO for the 3rd level?
Could anyone please give me some suggestions on this?
Thanks in advance.
Regards,
Joon

Hi,
any updates? I read that the RRI capability of the query is not supported in BEx report. Is it true?
If so, is there any workaround to enable this?
Regards,
Joon

Line Item reporting, how?

Hi ...
My cube has sales order, item in addition to other 50 charecterstics.
1. Sales Order
2. Sales Ordr item.
I have made enough line items including sales order number but sales order item is causing the fact table grow.
I can not make sales order item as line item (or) inlcude in sales order dimension.
could you guys give me some advice which dimension i can put the sales order item field?
thanks in advance.

Hello,
Sounds like you have the following setup:
You already have sales order number as a line item, thus the only characteristic in the dimension it resides in (can only have 1 char in a dimension identified as line item). You also have sales order item in your cube, but not as line item and it's causing your cube to grow to big. Yes, having the sales order number is growth itself, but then to have the item number in the cube will cause huge growth because you can have many, many items per order. If you cannot make line item for this char the best option is taking item number out of the cube.
If you load to a DSO and then push to a cube, leave the item number in the DSO and only push sales order number and other char to the cube. Now, when a report is needed you can report to report interface to the DSO to get the line item information. Meaning reports written off the cube give the user a particular report output. Then, if they need line item, then can perform RRI to go to the DSO to get line item information. Do you know how many reports require line item number? Percentage wise? If the majority of your reports require line item right away then you'll have to re-design and make a line item dimension. If the percentage of reports is small that need line item then leave it in the DSO and take out of the cube.
Hope this help!

Some Line Items are missing in Standard SAP FI/CO Reports

Dear All,
while taking printout of SAP Standard FI/CO Reports some line items and total value are missing. E.g using TCODE FBL3N, it shows correct value after inserting selction inputs but when displaying it in spool request or taking print out it misses some line items and total value.
Kindly help me in resolving the issue.
Regards,
Majid Khan

Problem was caused by support pack SAPKB62063 and SAPKB62064.
Apply OSS note 1100728 which was corrected in SAPKB62065.
Giana

Report painter - Line items

Similar Messages

Maybe you are looking for