Report Painter: P&L on Cost Center Group,BA(WBS/Internal Order) wise
Dear Experts, i require to create a report in report painter.
The requirement is to display P&L account on cost center group wise; if cost center is not mentioned and WBS/internal order is mentioned it should be shown under the respective Business Area and if non of the above is mentioned it should be shown in a separate column (General). The total of each GL should match the trial balance amount.
Please Guide Me.
Hi,
Its little bit complex to accommodate in report painter to in 1page.
Coz. Cost Center information will get in different library in GRR1
1AB Cost Centers: Variance Analysis FICTM 07.02.2013 CCSS
6O2 Internal Orders SAP 24.03.2000 RWCOOM
better you can develop with ABAP report.
Regd,
Khan.
Similar Messages
-
Make cost center default for an internal order
Hi friends,
I want to make the cost center default for an internal order type. Can you please tell me how can i achieve that.
Regards,
Wasim.Hi Atif,
thanks for your valuable reply but i am having different cost element depending on what is ordered. Is there anyway we can achieve this.
Regards,
Wasim. -
Report painter- business area and Cost center
Hi All,
we have a requirement to create the Report painter report where in the Revenue will be By business area and cost of the particular cost center by Cost element.
i.e revenue by Business area against cost by department.
It it possible to use report painter to create such report?. when i was going through the report painter it does not allow me to pull the cost by department .
Best regards
Rajesh dhulipallaHi,
Business consolidation is for more of consolidation purpose and cost center grouping is more for management reporting purpose for cost control purposes.
Both the organizational units serve for different purposes. Consolidatied business will not have much meaning unless you go with EC-CS.
Cost Center Groups are much for control purpose and help in managerial reporting.
Business Units are part of FI Organizational Structure and Cost Centers are part of CO organizational structures.
Regards,
Ravi -
Report Painter- How to make cost center report for Jun07-Jul08 ?
Hi Experts,
I need to make a P&L (Actual/ Plan) report for Jun 07 - Jul 08 by using Report Painter, but I'm having difficulty to make column for the next year period (2008) and some other things.
We are using K4 Fiscal Year Variant in ECC 6.0.
The layout is somehow like this:
Header : Cost Center
Actual/Plan Report
June 2007 to July 2008
Body:
Cost Element | Total Actual | Total Plan | Actual June | Plan June .................Actual July | Plan July
xxxx
xxxx
Account Group (total)
xxxx
xxxx
Account Group (total)
Grand Total
How to:
a. make the header "June 2007 to July 2008" ?
b. make the selection screen to provide parameter for June 2007 to July 2008? (e.g.: period 6 fiscal year 2007 to period 7 fiscal year 2008)
c. provide layout (rows and columns) as described above? it should provide detail cost elements and also calculate it as the total per account group, then finally the Grand Total for all of account groups.
Thank you before,
-=Meila.S=-Hi,
1. Put Year and Month as your General Selection parameters
2. In the label of the fields, if you put the parameter name with & before, it will display the value
3. If you put cost element in General selection, it will come with a group, and when you selecting the group, the report does the sub-totals automatically.
Regards,
Eli -
Function module for custom report for cost center group
Hello all,
I wonder, if there is any SAP function module for following query:
We have got a custom program, which evaluates cost centers. We would like to evaluate a cost center group, like it is available within the report painter - the output screen is splitted into two parts, on the left part there is the cost centre group hierarchy and on the right side, there are the values for the node, which is selected within the hierarchy.
Is there any standard function module od do we have to program it ourself?
Thanks in advanceHi Peter,
You have a BAPI which gives you the details of cost centre group, if this is what you are looking for:
BAPI_COSTCENTERGROUP_GETLIST
Regards,
Eli -
Report restricted to specific Cost Centers of a cost center group
Dear Experts,
can you tell me how to achieve the following goal:
We want to have a report writer report restricted to one cost center group that can be chosen by the user, but only showing in the first column the cost centers starting with "1049" for example that are part of this group and in the second column the cost centers starting with "1039" that are part of the group and so on.
As far as I know, if we insert a variable on cost center group, we cannot restrict the cost centers any further ... do you have an idea how to proceed?
Thank you very much!!
ThomasTry it with two sub groups in your main cost cente group, one for the first column, and on for the second column.
-
Cost center group language in report
Dear all,
In the Cost centers: Actual/Plan/Variance report (S_ALR_87013611), for one cost center group the description language of the accounts has changed from ES to FR. Unfortunately I am not able to understand why.
How can I switch the language to ES as before? This issue happens only in our Productive system. In Dev & Quality the language is correct.
Many thanks,
AnnabelleHi,
How do you solve the problem? -
Can I run cost center report referencing two cost center groups and two cost element groups. I know we can do multiple selection for cost centers and cost elements but that will not help my cause.
Lets say we have cost center groups A & B and cost element group 1& 2. We would like a report that shows us Sum of A1 + Sum of B2. This explains why we cant simply use multiple selction for cost center and cost element group. It will also give you an idea of what kind of output we are looking for.
Any help in this regard will be highly appreciated and points duely assigned.
NikHello nik,
what is the cost center hirearchy you are using. If you are using alternative hierarchy then you can do this by selecting higher level of the A&B.
regards,
sankar -
Functional areas vs. cost center groups for cost of goods sales
What are the benefits of using functional areas over cost center groups when building your p&l for cost absorbtion or visa versa? Which of the two is recommended?
Hi,
1: a P&L statement does not only contain cost-center related postings, you can have different CO-objects (Internal order, WBS-Element,...)but all of them contain the functional area in its master record.
The P&L reporting structure (created via report painter) can use account groups but restricted to one functional area for porper P&L structure creation.
Best regards, Christian -
Get Name for CO Cost Center Group and BGD Processing
Hi,
I use these function modules to get the cost center group nodes in the CO hierarchy.
If I pass it a value that is in two controlling areas
if prompts another screen to pick which controlling area we want to look in. My problem is when I try to run this report in the background it gets hung up on this screen waiting for input. any ideas on how to get around this.
here is the reference code.
thanks
Please note that the following logic is parts of SAP example report
RGSEX001.
Get the internal Set-ID from the external name of the set
Selection of sets can be restricted to a specific set class or
to sets matching a specific table field.
See documentation of function module G_SET_GET_ID_FROM_NAME
If the set class, subclass and setname is known, function module
G_SET_ENCRYPT_SETID should be used alternatively (see RGSEX020)
CALL FUNCTION 'G_SET_GET_ID_FROM_NAME'
EXPORTING
shortname = w_set
old_setid = w_setid
IMPORTING
new_setid = w_setid.
Read the complete hierarchy (set and all subsets)
CALL FUNCTION 'G_SET_TREE_IMPORT'
EXPORTING
setid = w_setid "Set-ID, not the Setname!!!
no_table_buffering = ' '
TABLES
set_hierarchy = it_hierarchy
set_values = it_values.Hi!
For reading cost center hierarchy you can try K_HIERARCHY_TABLES_READ.
It returns near the same info as one you've mentioned, works well for single controlling area and I hope in case of ambiguity it will raise one of exceptions provided. Give it try.
Regards,
Maxim. -
Report Writer Missing Data for Cost Center+Investment Internal Order
Hi Gurus,
I have met a problem on Report writer. T-code KSBB -> Report for Cost Center Group by Cost Elements in diff months.
The report can be drilled down to call KSB1 to give line items on the cost element by cost center/group.
The problem is the drill-down report missed the line items for investment orders. ( Compared with manually use KSB1)
The overhead internal order line items are fine.
For example, document 001-Apr:
Dr. Cost Element 1009 $900 -- BA 90 Cost Center 90000 Investment order 9001
Cr. Other cost elements. $900
Document 002-Apr
Dr. Cost Element 1009 $800 -- BA90 Cost Center 90000 Overhead order 7001
Cr. Other cost elements $800
In KSBB report, the cost center group for 90000 in cost element 1009 in Apr only has $800.
And the drilled down report which called KSB1 has the line item for docuemnt 002.
However, when I run KSB1 directly, the total amount for cost element 1009 in cost center 90000 is $1700.
Here is what I checked:
1. I have my ABAPer checked the KSBB program and KSB1 program to debug them in DEV ( DEV and PRD has the same problem). The different to get the data is that in KSB1, it has selected a value type 11 ( Googled: field name is WRTTP, Down payments as expenses. In program: WRTTP means Statistically Actual ) and 04 ( Googled: Actual True Posting. In program: 04 in WRTTP means Actual posting).
But in KSBB, it only select 04 when I clicked the drill down report to call KSB1.
2. I am thinking that the cause was on different types of internal order:
Overhead internal orders are statistical orders. Investment orders are actual orders.
Could you help to throw some light on the problem?
Thank you very much.
EmmaHi,
Cost Centre vise Report you can take from KSB1
Internal Order Vise Report you can take fro KOB1
Regards,
Sridhar Sha -
Why authorization for cost center groups does not worked ?
hello all,
I would like to give authorization for a CO report (S_ALR_87013625) based on authorization values : cost center groups.
But, unfortunately, it doesn't work. I get a message : No authorization for x of x read records.
Is it only possible to give authorization on standard hierarchy and cost center ?
Please, help me
Thanks and best regardshi,
Run the su53 transaction.See what authorization was missing -
Cost center Group & Assessment cycle
We are running CC reports for CC groups X and Y - Report GR55, Report group 1000 - Run in both currencies Pesos and USD by running in both currency modes.
Requirement:
1) How can we see the net balance in CC reports after assessments out = 0 in both Pesos and USD currencies.
2) Where we can see the link between Cost center Group and Assessment cycle.
Thanks,
RajuHi,
1) You will see the credit entries in the report after the assessment is run. Here, report should have configured in such a way, you can see both debit and credit entries.
2) If you have assigned the KSB1 Actual cost line report to the report, you can doubte click and see from which cost centers the values have flown through assessment.
Trust this helps much!
Cheers! -
TAble for cost center group in 3.0 F transaction.
hi,
i need to develop a report to extract cost center data from r/3 in 3.0 F version.
can u guys help me that which table has got entries for cost center group.
waiting for your replies,
Regards,
Rachanahi ,
I have checked in csks, cska, cskb, and cssk as well, but i didnt find a field which holds the cost center group information ..please help me as this is a bit urgent ..
Thanks in advance ,
Regards,
RaAchana -
Display Cost Center Group Text
Hi..
I'm new to abap, and I am working for abap for hr module now. My question will be...
How can I display a cost center group text in report? Is there a text table for it?
I get the cost center value from table pa0001-kostl.
I find the function BAPI_COSTCENTERGROUP_GETLIST by searching this forum. But, the parameters I can get is only for controllingareamask from pa0001-kokrs.
any help would be grateful
thanksDear Andreas,
here is the figure of my question,
mycompany--Plant1--department1.1--division1.1.1
--division1.1.2
--department1.2
--department1.3
--Plant2--department2.1
--department2.2
--department2.3
my company has two plants, each plant have departments, and each department has divisions which have their own cost center.
I want to know which plant the division belongs to by using it cost center. The cost center group of the division will be the cost center of department right?
please advise...
Dear Bhavik,
Thanks,.. but the FM is not return me anything.
Maybe you are looking for
-
OBIEE 11.1.1.7 - error when trying to refresh GUIDs
Know its new etc but we have been waiting for 11.1.1.7 for a while and just trying to look at it at the moment. We have hit a problem when trying to import a catalogue from our 11.1.1.5 production environment in that the steps to refresh GUIDs that w
-
Safari crashes after installing iomega external hard drive
I've just installed the iomega desktop external hard drive with firewire and usb 2.0. I'm presently connected to my computer by the USB port. Everytime I go to access Safari or Mail they quit on me after a few seconds. I've now disconnected the drive
-
Adobe Reader can not open thousands of vital PDF files for the company I work for.
Adobe Reader can open every PDF file on our server except for the many files that were received by one company. The coding is corrupt and I have not found a solution yet on how to decode it in order for it to open properly. I have looked into using u
-
Meta data missing in Web Gallery
When uploading images to my web gallery Aperture generates small and medium size jpeg files of my images. These jpegs does not include meta data. Has anyone seen this too? If I select to "Allow" "Downloading of:" (Optimized Images, Actual Size Images
-
i need to use a password protected program to host online albums for clients through my website. 1) i have no idea how to do this and 2) where to get it... my website is hosted through godaddy.com but is created through iweb. - i have been told simpl