Report Painter: Possible to show Report with Zero (not No records were sel)
Report Painter: Possible to show Report with Zero (not No records were selected)
Dear Guru,
is there any way to make Report Painter to show Report with Zero / 0 when there were no record were found. (No records were selected).
Regards,
Howard
hummm, I dont think so
THats not possible, as far as I know
Regards
Ajay M
Similar Messages
-
Report painter:display of G/L with zero amount
Hi,
I have created a report in report painter for expenses by profit center. however the system is not showing the G/L for which no posting has been made although i have maintained those G/Ls in the report. Is there any way to display G/L with zero values also?
I am running the report at fiscal year level.Hi, you can try to go the report painter (GRR2)
Formatting - section layout - Columns make sure the suppress zero columns is unchecked
and also you can go to Formatting - section layout - Columns - Treatment of zero rows - Print Zero Rows
Regards. -
Show groups with zero in crosstab
Post Author: JustinP
CA Forum: Crystal Reports
I am trying to get my crosstab to show groups with zeros in it, instead of suppressing it like it is doing. Any ideas?
Thanks in advance!Post Author: DesertRecluse
CA Forum: Crystal Reports
I don't think Crystal suppresses 0 totals by default. Did you check the field format? -
Report Painter vs FM Drilldown Reports
Hello Experts:
We are upgrading from Former Budgeting to BCS and are attempting to use the report painter tool for our reports. I have not used the report painter tool much although it is similar to the FM Drilldown Reporting functionality. My question is:
With FM Drilldown Reporting, characteristic FM acct asst was available as a row choice and included fund, funds center, and commitment item. It appears with report painter that each of these is a separate characteristic which creates three lines on the report instead of one.
Example:
FM Drilldown Reports
Fund/Funds Center/Comm Item $$$
Report Painter
Commitment Item $$$
Funds Center $$$$
Fund $$$$$
I know that we could use Fund and/or Funds Center as variations but we want them to appear on a line in the report so that when the report is downloaded, the information appears as in my Drilldown report example. Is there a way to create a characteristic that includes all three FM assignments? Or some other method to accomplish this?Hi Everyone:
I am still fighting with Report Painter. I am now trying to figure out how to pull Period in as a column characteristic even though I have it as a characteristic in the General Data Selection. I'm using Library 4FM for budget reporting. My end users want to be able to execute the report by period but for certain columns of the report be able to see all periods displayed. Example:
Adjusted Budget - All Periods
Commitments - Period from selection screen
Expenses - Period from selection screen
I do not understand the use of the GRCT transaction. Are there any links that might provide detailed instructions for it's use?
I would appreciate any assistance/guidance you can provide. -
Report painter and drill down reports
Hi SAP gurus,
Can any froward configuration of report painter and drill down reports.
iassign pointsHiii Sai Krishna,
can u forward the same documentation to me..plsss
my mail id - [email protected]
thanks in advance
regards
ramki -
Does report painter is dependent on report writer
Hi,
can anyone tell me that whether the report painter is dependent on report writer.
if iam going to learn sap painter alone then also we have to use sets , key figures etc.
if there is any dcument or pdf file please send me the link.
thanks,
joseph.hi,
Report Writer functions can be accessed from within the Report Painter.
The difference lies in the GUI of the report painter.
For Report Painter
http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/content.htm
For Report Writer
http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7dc143c211d182b30000e829fbfe/content.htm
regards,
pankaj singh
Message was edited by:
Pankaj Singh
Message was edited by:
Pankaj Singh -
How to delete picture files ( nikon NeF and jpeg ) with Zero KB size that were downloaded onto mac pro osx vers 10.5.8, 2x2.8 quad core intel Xeon
-- have not been able to move them or move them to trash without crashing Finder ?Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
Try trashing them in Safe Mode, reply if that doesn't help. -
Show characteristic with zero figures in report
Dear All,
I have report as below:
Material Qty
A 0
B 10
C 5
D 0
E 2
I want to filter Material with zero quantity.
I've already try with condition Qty = 0, but the report will suppress zero value and
return not applicable data found.
How to make this happen?
Appreciate for any kind of help. Thanks.
Regards,
StephYes Alice, I already try, but does not work
By the way, the figure - Qty, already show "0" (not blank, because it's from calculation).
Yesterday, I try to add a new CKF in query, add with "1" if the Qty return zero value.
And then I set the condition to this new CKF to activate, if the result the same as "1".
But it does not work either and return no appliable data found,
because the report automatically suppres the zero when I show Qty to the report,
although there is new CKF that return "1".
Regards,
Steph.
Edited by: Steph on Nov 5, 2009 4:08 PM -
SAP Report Painter - How to show currency key in header
I've created a new report painter report against table Faglflext. Basic key figures are extracting Local Currency (HSL). This generic report will be used for various company codes that have different local currencies. In the report header I've specified a General Text Variable with Variable name currency but no data is displayed. The data in the columns are however correct based on company code selection.
Please advise how I can show currency type in header.
ThanksHi Sonja
You have chosen HSL in the column definition which means to display the values in comp code currency
If I have understood your requirement correct, you want to display the currency of the company code in the Header text or some where as a text, based on the company code given in selection parameter
Thats really not possible!!
However, one smart thing you can do is to
1. Go to GRR2
2. Choose your report and Menu Extras > Report Text > Title page or Header
3. Enter a Text saying that
"This report displays the values in comp code currency... Currency of comp code 1 is USD, comp code 2 is SGD, Comp code 3 is GBP, etc"
Hence, the users would come to know the currency in which it is executed
Regards
Ajay M -
Report Painter - Characteristic cannot be combined with key figures
Hi,
I have added a new field (ZZABTEI) to the report structure CCSS and using that field as a characteristic in the report. But when I execute the report, it is giving the error "Characteristic ZZABTEI cannot be combined with key figures". Can anyone help me to solve this issue.
Thank you,
RekhaThere no code for this. I had to add the new field to CCSS structure. Then there were some configuration to be done. Then this message is got when the report in the report painter is executed. The details of this error message is as follows :
Characteristic ZZABTEI cannot be combined with key figures
Message no. GR410
Diagnosis
Characteristic ZZABTEI is being used in a report with a key figure that does not match this characteristic.
System Response
The system cancels generation.
Procedure
Check the report definition: the key figures used must be compatible with characteristic ZZABTEI. For examples of useful combinations of characteristics and key figures, see the SAP standard reports.
Technical explanation: The Report Writer table assigned to the report is defined as a view with multiple database tables (somewhat similar to Report Writer table CCSS) and a key figure used in the report refers to a database table which does not contain characteristic ZZABTEI.
Example 1 for table CCSS: If the 'cost' or 'quantity' key figures are used in a report (referring to tables COSP and COSS), you cannot use the 'Statistical key figure' (only occurs in table COSR) characteristic in the rows. On the contrary, using the 'Cost element' (tables COSP and COSS) characteristic is not permitted for the 'Statistical quantity' (table COSR) key figure.
Example 2 for table CCSS: If a report only displays line item data (key figures IE... or PE...), you cannot use the 'PERBL' characteristic, because it is only valid for summary data. You have to use the 'PERIO' characteristic for line item data.
Thank you,
Rekha -
IR 6570 fax TX report or "confirmation page" comes out with zeros.
Our office has a Image Runner 6570. It works fine, except for our Fax TX Report or confirmation page comes out with no info. THe Job No./ St. Time/ Usage T/ Pages all come out as zeros. The fax goes through to the reciepent, but we would like the cofirmation page to work as intended. We turned off the IR 6570, that didn't affect anything. We switched the Fax TX report seetings from off to error and on, but it still comes out as all zeros.
If anyone has had this issue or knows how to resolve it, a comment would be apreciated.Hi CalebR!
Thanks for posting in the Canon Forum! Canon does not provide direct support for imageRUNNER series products, but your dealer will be able to help you! If you don't have a dealer, please call us at 1-800-OKCANON (652-2666) and we will be happy to provide dealers who are in your area. -
Report Painter - Hide library and report instead of deleting
Good Afternoon Everyone,
My finance users are pressuring me to clean up the navigation in the GRR3 report painter transaction. Many of the libraries that are displayed are standard SAP libraries and I'm hesitant to begin deleting standard SAP libraries, reports, and report groups since you can't get those back once deleted. Is there a possibility to hide libraries/reports that are not being used any longer? I'm on my own and would like your input about what the best practice is when faced with this scenario. Thanks in advance for the help.
Jordan
Edited by: Jordan Simons on Apr 4, 2011 9:06 PMHi,
I don't know if its possible to suppress/hide libraries/reports.
Create T-codes for the reports the users really need and add the reports to the corresponding area menu in SAP. Thus users don't have a need to use GRR3 anymore, remove the T-code from the authorization concept.
best regards, Christian -
Report Painter: How to find report group of a report?
Hi experts,
I have a report that a user created in report painter, I created a transaction (normal report transaction) to acess this report, but the transaction isn't executing right (I don't have the option to see the results only to print it), and I want to try creating a parameter transaction, however nobody knows the report group the report are vinculed.
I want to know if are possible to consult the report group a report is in.
P.S. Sorry my english, points will be awarded for good answers.
Regards,
Fabio Gross
Edited by: GrossFabio on Feb 8, 2011 6:39 PMThanks to all for the help, I solved my problem looking into older topics from the forum.
To all who may have the same problem:
1 - Go to SE93, create a parameter transaction;
2 - Report = 'START_REPORT' / skip initial screen = 'X' / Inherit GUI attributes = 'X';
3 - In the parameters table you will type:
D_SREPOVARI-NOSELSCRN = blank
D_SREPOVARI-VARIANT = blak
D_SREPOVARI-REPORT = blank
D_SREPOVARI-REPORTTYPE = RE
D_SREPOVARI-EXTDREPORT = KP 01RPSCO_X NAME_OF_YOUR_REPORT
4 - Special atention to the last parameter as it is the most important in this transaction, the first part (including spaces) are always the same, the last one is the name of the report you created through the CJE*.
Regards,
Fabio Gross -
Attaching Variable to the Library for Report Painter for Cost center report
Hi,
I want to attach the Variable - "Cost element group" to the Library for Report Painter for getting Cost center report. The Cost center report should be cost element group wise with actaul, budget and variance. Please let me know the process.hi..
I think you have to first define Attribute mis as "V" in Cost element master basic data tab for the elements you want to capture as varible.
Then make a Cost element group / set in KAH1/GS01 and use it in your report.
kkumar -
SAP Report Painter - SAP tables for report items and hierarchy
Hello,
can you pls. help me with an information about the list of SAP tables for Report Painter, particularly the tables where the report items/positions and report hierarchy are stored?
for example, for the Report Writer report items and report hierarchy can be found in T8* tables.
What are these tables for Report Painter?
thank you in advance for any info.
Regards,
Jasminka
Edited by: Jasminka Vlahovic on Dec 29, 2010 8:53 PMHi Jasminika ,
Could you please share with me those tables names where report items and hierarchy are saved
Regards
Neeraj
Maybe you are looking for
-
I was trying to download games into my original iPad. I got a notice that I need iOS4. I searched online. I was told to download that from iTune. I checked around iTune but can't figure how. HELP.
-
Is it possible to use two external monitors with this laptop? I try hooking one up via HDMI and one via VGA but it will only enable one at a time.
-
How can I copy multiple data cd's onto a dvd?
I figured I would copy all my 3rd party software cd's onto a dvd so it takes up less space. How can I do this? Rob
-
Missing data when loading to PSA in 7.0
Hi all, I have a problem with a 7.0 load. I am loading a init load from R3 into DSO. I have made a test extraction in R3 (RSA3) and I have 145258 records in R3, but when loading into PSA, I only retrieve 100.000 records... it is very extrange and may
-
Im looking for a MacBook that is worth the money and decent for gaming and editing, any suggestions? There all so AWESOME!