Report Painter problem with empty selection variant

Hello,
I use the cost center selection variant for the column definition in Report Painter as characteristic value. This selection variant get only the cost centers which are valid from 1.1.2003 to 31.12.2004. The column of the report created by Report Painter which uses this selection variant display value without taking into account limitations follow from this selection variant. I expect value zero for year fiscal year 2007 in this column, because the cost centers are invalid in 2007 year but the report displays different value. The problem appeared after upgrade from 4.6C to ECC 6.0.
Best Regards
ZD

My problem with Report Painter occurred when I was creating my own report based on 1VK library.
In my example I used in the column definition characteristic Cost
Center, which is determined by selection variant, and Basic Key Figure
equal SWKG-Costs. For system date (18.07.2007) there are no valid
master data for the characteristic Cost Center but when I execute
report for fiscal year 2007 the column display no-zero value without
taking into account value of Characteristic Cost Center. I expected
zero value in this column because there are no postings for Cost
Centers (no valid cost centers were selected) in financial year 2007.
Could you help me with this problem ?

Similar Messages

Report Painter - Problem with Currency Display

Hi Gurus,
I created a Report Painter (Tx: GRR1, Library: 9P1) using Basic key figure SWKG (Currency: USD)
When I executed the report using a user XXX, this shows amounts in correct currency: USD. However, when I executed the report using a user YYY, this shows amounts in incorrect currency.
I reviewed SUIM transaction and compared both users and no have difference. Next I reviewed SU01 transaction and in Parameters there were some differences, y added parameter one bye one from XXX to YYY user, I executed the report again but the error persist.
Is there other user configuration that I can see?
Thanks in advance.
José Luis

Hi Sachin,
I reviewed RPA0 transaction and both users are the same properties.
I just created a new user ZZZ with copy of YYY, executed the report painter and it shows the amounts in correct currency, this is strange.
Thanks for your help.
José Luis

Hi ! I need to send an e.mail reporting a problem with de Authorized Service Provider in Brasil. I contact Apple Brasil, but didn't solve. Someone know an Apple's USA e.mail i can use ? Thanks.

Hi ! I need to send an e.mail reporting a problem with de Authorized Service Provider in Brasil. I contact Apple Brasil, but didn't solve. Someone know an Apple's USA e.mail i can use ? Thanks.

There is a link at the bottom of this page. http://www.apple.com/contact/

Good morning. I need to send an e.mail reporting a problem with de Authorized Service Provider in Brasil. I contact Apple Brasil, but didn't solve. Someone know an e.mail i can use in Apple USA? Thanks.

Good morning. I need to send an e.mail reporting a problem with de Authorized Service Provider in Brasil. I contact Apple Brasil, but didn't solve. Someone know an Apple's USA e.mail i can use ? Thanks.

There is a link at the bottom of this page. http://www.apple.com/contact/

Why Can't I Report a Problem with my iTunes Purchases?

When I go to my Purchase History and click Report a Problem with a purchase it does not take me to the right page. It takes me to this page: http://www.apple.com/support/itunes/ I do this on my pc and I follow these steps:http://support.apple.com/kb/HT1933 Still does the same thing.
Can I get some help please?

Click Support at the top of this page, then click the link under Contact Us.

HT4539 how to report a problem with a purchase

how to report a problem with a purchase

What type of problem ? If you've been over-charged then you can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
If the item doesn't work, then depending upon the item type (app, ibook, music etc) then you might be able to re-download it via the Purchased tab in the App Store or iTunes store app : re-downloading . Music, films and tv shows can't be re-downloaded in all countries. If it's an app then you should also try contacting the app's developer before using the 'report a problem'
If you aren't in a country where you can re-download the item or if it re-downloads in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account (Store > View My Apple ID on iTunes 11) and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that item and use the 'Report a Problem' link and fill in details about the problem (iTunes support should reply within, I think, about 24 hours).
Some people have had a problem with the 'report a problem' link (it's been taking people to this site on a browser instead of showing a form in iTunes) - if it does that to you then try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page.

Why in the world is it that everytime I attempt to report a problem with The TV Show "The Walking Dead Season 2 episode 1" I tunes redirects me to their main page..***.. I just want to watch this show. I'm deployed

Why in the world is it that everytime I attempt to report a problem with The TV Show "The Walking Dead Season 2 episode 1" Itunes redirects me to their main page..**

I have recently started having this problem in PSE8. The Adobe workaround
did work, but I don't fancy having to re register each time I use it.
What I have discovered is that it's nothing to do with the image metadata as it occurs before any image is opened.
It SEEMS to only occur if you use file/open with to open an image in the editor - IE start PSE with that command.
If you close elements down, and start it using programs/PSE/Elements (or your desktop shortcut) - the panorama feature magically works.
Each time I've opened the editor 'automatically' using image/open with, it seems to create the problem.
Hope this helps

Error GR493 report painter/writer with special ledger

Hi ,
I am trying to create a report painter using a table of a special ledger. The table is the one for 'real item'. The following error appears:
'Table ZIFRSA is not installed in Report Writer.
Message no. GR493
Diagnosis
The Report Writer can only report on tables if the attributes of these tables that are relevant for reporting are defined in control tables. This is not the case for table ZIFRSA.'
We are not using intercompany transaction. My question is if it possible to make report in report painter/writer with this table.
I can make report with the total table of special ledger, but not with the one for real item.
Thanks,
Cecilia.

Hi Cecilia,
I guess the tables created through SPL should look as follows:
1. ZIFRST - Totals Table
2. ZIFRSA - Actual Line Item Table ( I guess this is what you are calling real item)
3. ZIFRSP - Plan Line Items Table
Bear in mind that, the report is not created off table ZIFRSA but rather ZIFRST. Please create the report writer or report painter using table ZIFRST.
If the above suggestion did not work, then check the solution provided in OSS note 3761.
Elias

Reporting a problem with firmware and secondary ca...

Hi there,
I would like to report a problem with the 202.12.11 firmware for the Nokia E75.
My secondary camera works fine with the normal camera application until I make a video call. The picture for the video call using the secondary camera is just white and blank.
After making the video call, the secondary camera won't work with the default camera application. I can switch between video and image mode but all I see is my camera wallpaper.
It's definitely not the hardware because the secondary camera will work again after reinstalling the firmware .... until I use it in a video call that is!
I have also had no problems with video calls using the older firmware.
Please advise and I hope you can issue a patch soon.
http://zhi-lee.com

I had the exact same problem. I eventually used their "Express Lane" problem reporting, and they refunded me the cost of the episode. (???) Um, hello, that's not what I was asking for... can I just have my episode #3 please? Hopefully they'll get around to uploading the right show eventually, and possibly not use the Swedish Chef as an intern to manage their upload queue. #borkborkbork

I'm trying to report a problem with a order i place and paid for but didn't recieve how do I do it?

I'm having troble reporting a problem with something I ordered from the itunes Store. Please help?

You can try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Problem with empty report parameters when passed to PL/SQL function

Hi,
We have come across what appears to be a bug in the JRC. When passing a report parameter to a PL/SQL function as a parameter, empty parameters are changed before being sent to the function. More specifically, an empty string "" ends up as the value "(')" in the PL/SQL function parameter. In our report we print the report parameters on the first page so we know that the parameters are OK before being passed to the database.
The problem exists for version 12.2.203, 12.2.204 and 12.2.205 of the JRC.
We have identified a workaround, but it is not exactly elegant: Before executing the report we modify all empty parameters ("") to " " . In the PL/SQL function, we trim all parameters before using them.
We call the function using a command object with a sql syntax like this example:
select * from table (qa_batch_release.get_qa_br('{?p_report_id}','{?p_reg_set_number}','{?p_cr_number}','{?p_change_id_decode}','{?p_country_id}','{?p_mfg_item_no}','{?p_4_no}','{?p_5_no}','{?p_7_no}'))
The PL/SQL function is a table returning function.
Best regards, Thor

Hi Kishore,
using #COLUMN_VALUE# would probably not make much sense, because normally a report has multiple columns and not just the numeric column which you want to verify if it's negative. But APEX will fire the template condition for each column, because the report template is a column cell template.
What you can do to make it more generic is to use for example
#CHECK_AMOUNT#
in the template and provide a not displayed column in your SQL statement which contains your value which is named CHECK_AMOUNT. For example:
SELECT NAME
, BALANCE
, BALANCE AS CHECK_AMOUNT
FROM XXX;Because this CHECK_AMOUNT column would be a generic name, you can use this template in all your reports as long as you provide this column.
Thope that helps
Patrick

Executing Report Painter Report in Loop With Different Selection Parameters

Hello all,
I have to execute a report painter report about 300 times, allways with a different set of selection parameters and allwasy send the result to a different person via mail.
Has someone an idea how to to this work in an automatic loop.
Thanks.

HI,
My suggestion is to discuss this with your technical team (ABAP). A Good idea would be to create a wrapper program (small program based on your report painted report code) that contains email functionality. You can then save your 300 variants and then schedule a background job for the same using transaction code SM36.
Regards

Problems with the selection of text or objects

dear fireworks community!
unfortunately i have problems with my running version fireworks (CS6) and i can't find any solution or even get help via the customer support.
i can't switch between objects with a click, when i've choosen one already. i also can't cancel the entire selection. the only way (to select a new item) is to click on an empty space, hold it and pull the selection over a new item.
another thing is that i cant select a textfield with a doubleclick or switch beteween choosen tools within the usage of a shortcut …
what i already tried:
updating, deinstalling, re-storing preferences, "cleaning" the libraries, installing (this entire scenario for at least three times)
i hope someone of you can help me!
thanks in advance!

incredible!
thank you so much!

Problem with variable selections

Hi All
I am executing the report with period 46.2007-50.2007 . I am getting the result for this period.But if i run the report with same selections from 42.2007-50.2007, I am not getting the data.It says no applicable data found.
I am using interval as the option for variable .Could some one help on this?
Thanks
Raghu N

Hello
According to your selection you should get the data.
check the both selection (46 - 50) and (42 - 50) in the LISTCUBE transaction.
if data available in both cases then problem may be with other restrictions.
If no user exits are in that variable try create one more variable as it is and then try by restricting with new variable.

Internal variables of report painter shouldn't be selectable

Dear collegues,
I have created two new internal variables in report writer in order to use them in planning layout of TA KP67:
- previous year: marked as internal variable: calculated as: &1CGJAHE-1 (2008)
and
- future year: marked as internal variable: calcualted as: &1CGJAHE+1 (2010).
In report painter these variables are assigned to key figures and are not shown on the selection screen again as they are calculated internally.
But in planning layout of TA KP67 cost activity planning these variables are also assigned to key figures like actual costs or fixed planned costs and are indicated as acceptable for input on the selection screen but shouldn't - so how it is possible to define internal variables in co planning layouts as really internal which do not come up if the planning layout is executed via TA KP06?
Thanks and regards,
Christian

Hello Christian,
when I understand your request correctly, you want to plan for several years like 2008, 2009 and 2010 but you just want to enter one year. Right?
For the column with the current fiscal year you can use a standard variable like GJAHR. For the other columns you define the year in the column as variable with value "GJAHR-1" (last year) and with value "GJAHR+1" (following year). On the selection screen of the planning transaction you will only have one field for the current year and the fiscal year for the other columns is calculated accordingly when you run the planning.
Hope this helps.
Cheers,
Daniela

Report Painter problem with empty selection variant

Similar Messages

Maybe you are looking for