Report Painter / resources committed

Gurus, I need your help.
Getting in report painter committed resources released purchase requisitions.
If I was not clear, sorry and I can give more details.

是这样的，其实一般的报表可以不用去取report  painter的结果，只需要直接取数据库表即可，但有些report painter做出
来的报表逻辑较复杂，而且顾问考虑到其它各种各样的因素，如果直接去取表，逻辑将会很复杂，很麻烦，而且今后
对数是个问题，所以就决定直接去拿report painter生成的报表，请帮忙想想法，谢谢 。

Similar Messages

  • Period Balance Report for Actual/ Commitment only

    Hi,
    Do we have any report for getting Periodic balance for cost Centre Actual and commitment Balances.
    Regards,
    Venkat

    If there is not a specific YtD report, then it is easy to create one: Using the report painter, copy the existinf report, and amend the columns to reflect not the current month, but from the 1st period to the current month.

  • Report Painter vs FM Drilldown Reports

    Hello Experts:
    We are upgrading from Former Budgeting to BCS and are attempting to use the report painter tool for our reports.  I have not used the report painter tool much although it is similar to the FM Drilldown Reporting functionality.  My question is:
    With FM Drilldown Reporting, characteristic FM acct asst was available as a row choice and included fund, funds center, and commitment item.  It appears with report painter that each of these is a separate characteristic which creates three lines on the report instead of one.
    Example:
    FM Drilldown Reports
    Fund/Funds Center/Comm Item    $$$
    Report Painter
    Commitment Item  $$$
    Funds Center       $$$$
    Fund                     $$$$$
    I know that we could use Fund and/or Funds Center as variations but we want them to appear on a line in the report so that when the report is downloaded, the information appears as in my Drilldown report example.   Is there a way to create a characteristic that includes all three FM assignments?  Or some other method to accomplish this?

    Hi Everyone:
    I am still fighting with Report Painter.  I am now trying to figure out how to pull Period in as a column characteristic even though I have it as a characteristic in the General Data Selection.  I'm using Library 4FM for budget reporting.  My end users want to be able to execute the report by period but for certain columns of the report be able to see all periods displayed.  Example:
    Adjusted Budget - All Periods
    Commitments - Period from selection screen
    Expenses - Period from selection screen
    I do not understand the use of the GRCT transaction.  Are there any links that might provide detailed instructions for it's use?
    I would appreciate any assistance/guidance you can provide.

  • DESCRIPTIONS ARE NOT SHOWED IN REPORT PAINTER

    Hi, I have a problem with the report painter, because i am run the report but i realize that  if the master data(Commitment item ) is not created for the next year  example 2008 and  I am running the report for the year 2007, when the report is generated the report does not show the description of the commitment item ...
    Anyboy has a suggest
    THANKS A LOT!!!
    Pat

    Hello sayujya Patil,
    Thanks for your reply, i have created report in Report Painter, after execution the report i tried in all the parameters under setting menu > report and section layout as well> lead column --> and kept the radio button on key and description, still its not showing the description of the GLs under lead column....
    Please reply...
    Thank You.

  • Report Painter/Report Writer - Documentation

    Hi All,
    Can any one send me documentation on Report Painter. I have requirements to created some reports in my project.
    Please send the documentation to my email id [email protected]
    Bye,
    Ramesh

    Hello Balaji/Ramesh
       Can you please send me the report writer documentation @ [email protected]
    I have an requirement to combine 2 standard report S_ALR_87013018 for total plan /actual /commitment & S_ALR_87013017 for actual/plan /var. and create one z report.Please help me.

  • How to copy code from Report Painter report?

    Hi all,
    I have a cost/commitment Report Painter report from Project Systems module. I need to include one more column with a field, Release indficator, from purchase order in the report. I am finding no way to do it through report painter and also am not able to copy the code of the exiting report painter report. Please advice.
    Regards
    Tapan

    check the defination of that report in KE30 or thru menu path ?
    Regards
    Prabhu

  • How to copy code from PS Report Painter report?

    Hi all,
    I have a cost/commitment Report Painter report from Project Systems module. I need to include one more column with a field, Release indficator, from purchase order in the report. I am finding no way to do it through report painter and also am not able to copy the code of the exiting report painter report. Please advice.
    Regards
    Tapan

    check the defination of that report in KE30 or thru menu path ?
    Regards
    Prabhu

  • Report Painter for Funds Management

    Hi all,
    I try to develop a budget vs actual report through report painter (tcode: FMEN and FMEK).
    The problem is when execute the report, there is no budget data, just actual data and variance.
    When create the form, I used key figure :
    1. Annual budget (current) in FM area crcy with debit type=3 (expenditures), budget version=0
    2. Commitments/actuals (PB) in FMAC with value type=66 (profit transfer postings) and 54 (invoice) --> I used the actual from the invoice.
    3. Formula: actual - budget
    Is there something wrong when define the key figure of budget data?
    Many helps.
    Thanks

    Hi,
    The library (4FM) is based on availability control tables; therefore, only commitment items where either budget or posting is registered will be presented. Define correctly the parameters within the selection making emphasis on record type and ledger - it should do the work for you.
    Regards,
    Eli

  • Report Painter for PP reports

    Hi there ,
    Can any one please help me in learning how we can prepare reports using report painter ... please share with me the any learning document & resource from where I Can learn the same ...
    Secondly, do we use report painter for PP rather SCM reports ... I  have seen in all the cases it is being used in FI reporting ...
    Thanks
    Kaushik

    Dear,
    Most of the PP reports are for internal purpose so we never use the report painter.
    Report painter is available for FI module.
    Report painter is generally used for reporting from totals tables. Your requirement looks more like a query from master data tables. For this you'd better use SAP query (SQ01) or Quick Viewer (SQVI).
    Please refer the below is the links to Report Painter
    http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
    Re: Report painter
    Hope it will clear your doubt.
    Regards,
    R.Brahmankar

  • Report painter - GGR2-  filter on a characteristic whose value is empty

    Hi Experts,
    In element defintion, we must filter on a characteristic (C/f level - RCFLEV - Document and Predecessor not Carried Forward) whose value is empty but represent a set of data . The list of values is :
            Document and Predecessor not Carried Forward
         X Document or Predecessor Carried Forward
         U Customer Flag: Document or Predecessor Carried Forward
         9 Cstomer Specification: Number of Carryforwards
    The report painter does not allow to exclude certain values. Which solution can you propose to me to filter on Document and Predecessor not Carried Forward?
    Thanks and Regards
    Fabian

    Hi,
    Thanks but unfortunately, this solution does not function
    The report is based on structure FMRBCS. The basic key figure is HSLT. In the characteristic , I selected c/f level and I encoded '#' in the field u201Cfromu201D and in the field " tou201D but not result. With the value u201CXu201D, I have a result.
    I also tested the use of character u201C#u201D for filter on field C/F Level with the transaction se16N on transp. table FMIOI (Commitment Documents Funds Management) mais no values found.
    I am interested of all solutions to solve this problem in the report painter.
    System :  SAP ERP 6.0 - EHP 4
    Fabian

  • Read Purchase data using Report painter with CCSS structure

    Hi
    I'm triying to set-up a simple Budget by material procedure using Rosurces defined as material and KP06 to plan Qty and Values.
    All works fine.
    Later I need to write a report for Compare Planned vaues and Effective values at material (resource) level.
    Unfortunately resource can be used only for planning, so none Effective values is available in CO.
    I thought to write a Report using Report painter and library 1VK (CCSS structure) for planned values and import from a LIS table the effective values (Ordered, Invoiced) directly from Puirchasing environment.
    Is it possible by using exit or other tools, import LIS data into a CO Report painter program ???
    Thanks in advanec for your help.
    Claudio

    Hi
    I try to specify better my need.
    I've defined using report painter a  Z report using Report Painter.
    Inside teh new Report, I can use a Customer key-figure which does'nt exist in the CCSS structure.
    Is there any solution to Read data from other SAP tables and use these info into the report.
    I'm not very frioendly with Set, Key-figures and variables, and I'd like to undestand if my needs can be solved using Report-painter.
    Thanks for your help.
    Claudio

  • REPORT PAINTER LAYOUT

    Adding data columns to report drill down table
    Technical code - ZFI131 - Report Painter
    YTD CCA-REP GRP & CST CNTR CRP VAR: Selection
    Enter 2011, 2,2,,0  Group 12021862
    YTD CEG_CCA-REP X CCG_C10001
    Select - Manufacturing Activities, Drill down into actual "Labor Activity" number.
    Drill down into total (Yellow value) (Cost Centers actual line items)
    //JLD_SUPP SUPPLIES LAYOUT FOR COL HEI
    Each line of this report has an aaociated Material number, Resource and yield and UOM. We need to be able to add the Material, Resources, Yield, and UOM on the tabluated report.
    in the above report it is linked with KSB1 tcode there the above layour has been used. in the standard layout there is no resources and yield field is available. how to bring and why it is not available in standard layout field list. is there any performance issue leads into that? and also material field no material number is not pulling.
    Can you tell me why this is happening and why those fields resources and yield where not available in standard layout?
    Regards
    Laxmi

    You can pretty much do most of what your colleague is enquiring about.
    1. Create a report library GR21
         -   Table name: E.g GLPCT.  You can copy an existing library and modify.
         -   Description: E.g  Branches P& L Reports
         -  Check off the characteristics he wants
         -  Check off  key figures
         -  Check off basic key figures.
    Define sets and variables if need to with t-codes GS01 and GS11 respectively.
    2. Create a report group GR51
    3. Create report either using GRR1 or GR31
       - Enter the library you created above
       - Enter report name
       - You can copy from an existing report and make changes to your likeness
       - Define you general data selection
       - Element definition which is the columns and rows
       -  Click on Extras and define report headers
      - Click on Formatting to format columns and rows
    4. Assign report to report group created earlier on.
    The above guidelines are the basics on how to proceed.
    Refer back for any further clarifications.
    Elias
    Edited by: Elias Akorli on Nov 24, 2009 2:16 PM

  • SAP PS - Report painter Issue

    We have some Z report development using Report painter for the project , we call it is project control sheet, it contains many fields along with the commitment values for the WBS.
    Z report values differs from the cji5 values..when we drill down to the Z report it actually takes you to the different value.
    we had reconstructed the project info record using CJEN. but no use .
    CJI5 values are correct but custom report has the issue.
    Can you please help

    Hi Mandar,
    Please check below settings for commitment values.
    Name
    From
    text
    to
    text
    Version
    0
    Plan/Act - Version
    Value Type
    21
    Commitments from Purchase Requisition
    Value Type
    22
    Purchase Order Commitment
    Value Type
    23
    Reservation Commitment
    Value Type
    24
    Funds Commitment
    Value Type
    26
    Commitments from Transfer Price Agreemen
    Object ind.
    P
    Project item
    Object ind.
    1
    Order plan values: appended, apportioned
    9
    Order values: not appended, deleted
    Debit type
    1
    Costs and credit-side payments
    these values need to set in form or you can use form 12KST1A       Costs: Budg/Act/Cmmt
    thanks
    Sunil

  • Drill Down - Report Painter (Urgent)

    Hi,
    I need to add drill down i.e. transactions CJ74 and CJI4. IN transaction GR52, I added CJ74, CJI4 as  TR and RKPEP003 as RT.
    My problem :
    When I execute the program, and doble click on the O/P row, pop is showing all the three options i.e
    1. CJ74
    2. CJI4
    3. RKPEP003
    If I select 1st two, it is throwing me out of the report.
    In the last case, it is going to the o/p of report RKPEP003  and not displaying any data as it is taking the default values as they are when I execute RKPEP003 pgm in SE38 and it is not taking values from the row/column I selected in the report painter output.
    Can you please let me know how to correct this.
    Thanks in advance.
    Regards,
    Kiran.

    Hi,
    Since the report is running on the server, the output shall be as well. I don't think you can use desname to specify a local folder as the server knows nothing about local machine. It only has acces to it's resources.
    The user will need to generate the report and then save to local disk. You could also think about other delivery methods such as email.
    Hope that helps.

  • Change Management process for Report Painter tool...

    Hi everyone,
    I am curious to see what process is used out in the industry to allow report painter reports to be defined and executed in production.  Do users define their reports in DEV and use the STMS or the export/import feature or do they create them directly in the PROD environment?  I personnally think it should be created in DEV and promoted to the remaining servers within the landscape for proper change and release management. 
    Do any of your technical resource monitor and look at reports before they are moved to another environment or do you allow your systems analyst or even end users to create their own report without any monitoring by technical resources?  How stable is report painter and is there any major performance issue while defining any type of reports?
    Any comments are welcomed and appreciated.
    Thanks in advance,
    Luc

    Hi Luc,
    In vast majority of project I have been participated, the report painter was in responsibility of the consultants and not the users. Usually, these reports were created in test system and then exported, via standard export/import functionalities, to production.
    Of course, one can create those reports directly in production (though, without creating a transaction code for them - this will involve CR), but I'd recommend to stick to 'first TEST, then PROD' model. This would put some order in the reports directories, as the creation of a new report will be controlled.
    Since, these reports based on totals tables, no performance problems are anticipated.
    Regards,
    Eli

Maybe you are looking for