Report Painter - Table - GLT0

Hi All,
I am trying to create an Balance Sheet report in report painter. I am using the table GLT0.
I am able to get the current period amount - i.e. net of debit and credit; but i am not able to get the balance carry forward amount for the accounts. Which basic key figure should be used to get the Balance carry forward amount?
Thanks and regards,
Ankur

Hi,
I am builiding an report on Balance sheet accounts thru Report Painter. and there if i Put in Period "0" in the selection criteria or hard code it the general selection data.. my balance carryforward figure will be included in the output.
Hopefully this may resolve your query. I am sorry i dont have any documentation on this.
Thanks and regards,
Ankur

Similar Messages

Report painter Tables

Hi,
   I am working on Report painter. Production order based reports (Ex: T.Code : kko4 and T.Code: kko0). I want to add some more fields in to the table. Can any body guide me how to locate the relevant table and libraries .
   Aftter adding the new fields how to get the reports.
Thanks
Dasa

Dear Dasa,
Tables:
CEFORMT                        Table for Report Painter Row and Column Texts
CESETS                         Set Administration in the Report Painter
REPPSCRN                       CO-OM Reporting: Screens for User Settings Maintenance
TKEP7 Characteristic group
Hope this will help.
Regards,
Naveen.

Report Painter table RWCOOM

I need to use report structure RWCOOM for a specific report painter report. I would like to include company code (BUKRS) as a characteristic in the report, but this characteristic is not included in that structure. Does anyone know if it is possible to add a charactertic to this structure and if so how? Thanks,

Hi,
check SAPNET note 407739, it describes how to enlarge RWCOOM (in this case its BELTP) but maybe you can use this as a guideline for BUKRS.
Isn't it possible to create groups / company code for the objects you want to report to avoid enlarging RWCOOM?
best regards, Christian

Two Key figures in Report Painter column?

Dear Experts,
We have some company codes with group currency setup and others without this. I have created a report painter report with table GLT0. I want ability to produce a consolidated report for all the company codes.
However, when I define the report column, I can only select one basic key figure in the column viz. HSL - Local currency or KSL - Group currency for example. In my report I have selected HSL since majority of the company codes report on local currency.
Is there a way that the program can be told to change the basic key figure during report execution to KSL - Grp Curr for select company codes only?
Or is there a way to have two basic key figures in a report painter column? I know I sound foolish on this question. But still I ask this.
Any thoughts, pls share with me. Thanks.
Vishal Thakur

You are right Sue. But unfortunately way back in the 90's when our company implemented SAP, those company codes did not activate the 2nd LC as USD. Thus, these companies only have figures updated in the 1st LC which is USD.
Subsequently, we acquired new companies overseas and then for these co's we switched on the 2nd LC as USD with the 1st LC as the country specific currency.
Vishal.

Trail Balance in report painter

Hello Friends,
i want to create trail balance report In report painter(table:faglflext). My issue is if the cumulative balance i.e (Dr. - Cr.) of G/L is positive then the balance should be shown in debit side column, if the cumulative balance i.e (Dr. - Cr.) of G/L is negative then the balance should be shown in Credit side column. will you please let me know how and where to write this logic...
Thank You....

Hello,
Normally, reports S_ALR_87012277 - G/L Account Balances and S_ALR_87012301 - Totals and Balances serve the purpose of outputing trail balance for accounting staff.
Kind regards,
John Chin

Error while Client copy request - Report Painter

Hi friends,
I am copying a Workbench request from customization client to test client through SCC1. This relates to Report painter report transport for FDI1. However, I am getting the following warning message while transport -
"Program ended with error or warning, return code: 4"
As per my understanding, the above message is a warning message. However, I would like to check if any of you have come across this message? Is this a normal warning message without any negetive system impact?
Request your guidance for the same.
Thanks in advance
Hrishi

Hi Suma,
Thanks a lot for the response.
Yes it is a Workbench request. And I am adding the new report to the SAP Standard report menu under Line Item Analysis.
Also, some COPA tables are getting updated in the background. Is this normal? Are the standard report painter tables related to COPA tables in any manner?
Thanks in advance.
Hrishi

Report Painter Library: troubles with new field in the additional structure

Hi, ALL!
I'm creating a new field in the Report Painter table GLFUNCT. Do do it I created my field in the additional structure GLDBZ for GLFUNCT and create an row in the T804C table for new field.
Who has expirience in customizing using T804* tables? What tables should be used and how? I have the following troubles:
- I do not see the new field as characteristic in the library - I don't know the customizing table to set fields from additional structure as characteristic
- in the generated Report Painter program my new field exists but call of filler routine is always disabled
Thanks
Tatiana

Hi Shabitha,
just wondering if you ever found an answer to this, as i'm searching for info on same matter.
Thanks, Regards,
Okan Yarligan

Report Painter YTD data for Balance Sheets accounts

Dear Gurus,
I am working on GLPCT report painter table and I would like to setup a report for inventory accounts with YTD data and not only movement on the current year.
Which parameters (for basic key figures and Characteristics) should I use in order to have the report with 2011YTD data (2011YTD = closing balance 2010 + movements 2011).
Thanks
Kind regards,
Dom

Hi
The As on Date balance cant be cumulated...
Eg; you bought inventory worth 10 million in Current year and as of now you have 4 million worth of inventory in stock
Cumulated bal in this case is 10 mil and As on Date balance is 4 million... 4 million is what you will get in SAP reports
The same Key figure which shows values in comp code currency can be used
br, Ajay M

Table need to be added in report painter library

HI,
Can't we add any table in report painter library (GR21) like if i add s032 it is accepted by library while 'MARD' is not accepted it gives error Table MARD is not installed in Report Writer.
what is the difference between s032 and MARD table, as both are transparent table. but one is accepted and other is not.
Thanks

Hi
You can't use all tables.see the below lines for it:
Both Report Painter and Report Writer can be used to report on the following tables and tables types:
 Evaluation structures set up in the Logistics Information System (LIS). These structures normally begin with an S or ZF. Several different tables and views within the R/3 System can be added as evaluation structures.
Note: You cannot add cluster tables, such as BSEG.
CCSS is used for Cost Center Accounting (CO-CCA), Internal Orders (CO-OPA), Activity Based Costing (CO-ABC) and for cost element reports in Project Systems (PS).
GLFUNCT is used for functional area reporting in cost-of-sales accounting.
GLPCT and GLPCOP are used for Profit Center Accounting (CO-PCA/EC-PCA).
FILC is used for Legal Consolidations (FI-LC).
COFIT is used for the Controlling Reconciliation Ledger (CO-CEL).
ZZ tables are created for the Special Purpose Ledger (FI-SL).
FIMC is used for consolidations in the Enterprise Controlling module (EC-LC).
GLT0 is used for Financial Accounting (General Ledger) reports by account, company, and business area (FI-GL).
KKBC, KKBE, and KKBU are used for the Controlling Product Costing module (CO-Costing).
reward points if useful
regards
Anji

Report to display total and detail from table GLT0 and FBL3N

hi guys,
we have the requirement to show a report with total amount per GL account from table GLT0 and to as well display the detail from tcode FBL3N ..
shall i use normal report via SE38, if yes, what is the table that stores detail from FBL3N or does report painter support the above requirement..pls advice

use report SAPF070 as sample
(compare documentation!)
hope that helps
Andreas

FI table for Report painter

Which table I will take to create FI report in Report Painter ?
Please help me..
Thanks & Regards,
Ananda

Hi,
If you are in ECC environment use Table FAGLFLEXT is suitable to create Library & Report Group & Report by using report painter.
if you are in ECC but not actvation new GL / you are in up to 4.7 then use table GLT0
regards
Viswa

Can we combine the two tables for Report Painter

Hi,
For making the report in Report Painter, I am not getting all the required characteristics and Key figures all in one table / Library.
The required ones are in Table KKBC, GLT0 and CCSS.
Is it possible to combine these tables and make a new one so that I can create the Library and can use that Library while making the report in Report Painter.
Or is there any other work around to get the my required charcateristics and Key Figures so that I can make the report easily?
I dont want to go through ABAP route.
Kindly help.
Regards
Kami

Thanks Bulut for your reply,
But by going through View creation involves ABAP help, that I dont want.
However, is it poosible to use View while creating the reports in Report Painter? I am not sure.
I want to know whether can we create a table which is used for report painter, so that I can use for creating the Library and then the reports.
I hope you understand my point.
Regards
Kami

Library Tables in Report Painter ?

Hello,
can we use two tables while creating a library for the report painter ? mmy guess is on using a view ??
If views, then how to use them in the libray while defining the characteristics n all ??
Hope i am comprehendable ..
Thanks.
Shehryar

Hi ,
i seen the same issue in sapgenie.com , just have a look .
as per my knowledge u can use Views in report painter.
regards
Prabhu

Change Table in Report Painter

Hi Experts,
I have some Report Painter reports assigned to a Library. I would like to change the table. Is there a a way to change the table without re-writing the reports? I can add a new table, but do not know how to remove the existing table without affecting the report. Does any one have an idea? Please advice.
Thanks
Kingsley

Hi,
I would like to change the assignment of the form.
Yet it is assigned to a standard report and I would like to assign it to a report I have created.
Ronan

Table used in report painter

Hi,
How to check what table is really used in a certain report painter.
For my case, I want to a report 1KSL-001 under 1VK library, and I can see this 1VK library is using table "CCSS", but CCSS acctually is not a table, its just a structure.
So, how to use what tables are used while running report 1KSL-001?
Thanks.
Cheers,
Bernard Gunawan

Yes, but how do you know and where to check that this report is a collection of fields of those tables?
Could you please tell me what transaction code to check, and guide to what table behind a report painter?
Bernard

Report Painter - Table - GLT0

Similar Messages

Maybe you are looking for