Report painter target currency

Hi Gurus
Is it anyhow possible to be able to see the figures in posting date currency. I have cost center report with several items. But the problem is that the total amount is translated on the current exchange rate or some other spesific day (I use target currency as default). But i would like to get it in a way that the posted amounts are translated on their posting date exchange rate, is it possible? The total line should then add all these translated amounts together.
The total sum differs very much from the real sum.
Any help would be greatfull.

Hi,
I think this is feasible in standard.
You can look at cost center report 1VK>1S3W-001 (S_ALR_87013634) as an example.
Regards
Ali

Similar Messages

  • Report Painter : Local currency is having decimal points for chile

    Hi Friends,
    I have a report painter in which the amount for the the countries which are not having the decimal places
    like chile and Japan are displying with the decimal places, when i changed the base key figure as the transaction currency instead of the local currency then no data is coming.
    If someone have some good ideas which can resolve this issue please suggest me.
    Thanks & Regards
    Digvijay

    Hi Yogesh,
    Thank you for ur reply.
    in the report, i have 10 keyfigures. 4 are being picked up from the report and they have currency translation variable. The rest 6 are formulas. On these formulae, i restricted the decimal display to "nothing defined". it works fine for all the 6 formulae. for WON it does NOT show decimals and for the rest of the currencies, it shows decimals.
    but how this can be achieved on the 4 direct keyfigures??
    Rgds.,
    ASha

  • Report Painter and currency issue

    Hi All:
    We have several report painter based on table FAGLFLEXT and have a problem maintaing the company code currency in report results.
    Here is the scenario:
    User 1 runs report for a company code A in country A with Currency A
    User 1 does a currency conversion to Currency B.  Report is now shown in Company code A, for Country A with Currency B
    User 1 exits report and is prompted to if they want to save their data.
    User 1 selects that they do want to save data (this is a data save..not a report layout or defintion save).
    User 2 now runs same report for Company code C in country C with currency C
    Results of report are now in Currency B as this was what was saved by User 1
    I have found that it requires both the currency conversion and the Save Data function to make this happen.  If only one of these steps is done, User 2 gets results in Currency C.
    I believe I can fix the problem by removing the authorization to "Save Data"...but would like to find a better solution..Any ideas would be most appreciated

    Hi,
    Can you please forward the material on drill down report.
    It is very much required to meet client requirement
    Thanq
    haribabu

  • Report Painter - Multiple Currencies

    Hi,
    I would like to know on how you create multiple currencies in report painter. We have a requirement
    whereby we have 3 different columns:
    Current Year (Actuals)  ---> Exchange rate Type X
    Prior Year  (Actuals)
    Plan Current Year  -
    > Exchange rate Type Y
    My question is how can i create a report that will enable me to prompt for exchange rate of Actuals and Plan data  as  we would like the user to enter different exchange rate type for actual & plan.
    Appreciate your help.

    Hi,
    I'm afraid, it's not possible via Report Painter (to have different columns calculated by different rate); you'll have to develop a report in ABAP for this.
    Regards,
    Eli

  • Display Report in Object currency

    Hi all,
    Report created by report painter, object currency(EUR), but report shows the values in controlling area currency(SEK).How can the values be seen in object currency in the report?
    Thank you.

    If it is a cost element report, then you can set the object currency as default in RPP0. If it is heirarchy reports, then you can use Settings>Currency inside the report, but you have to mention the currency here.

  • Report Painter Currency Help

    Hello Gurus!!
    I'm a report painter user for almost a month, i've been doing a report using multiple currencies, it has worked well, but i need it now to make it to a target currency (lets say, Japanese Yens, YEN), the money is originally in mexican pesos (MXN), the company money unit is dollars (USD).
    I want to make a conversion directly from MXN to YEN, but the sistems makes this conversion: MXN->USD->YEN, i've made lots of changes on the system, and still can't find out how to resolve this, i need direct conversions, not the triangulation its making, hope u can help me, thanks!!

    Hi,
    You can copy and create the new report with column defined with basic key figure as "Total Cost in Object Currency".
    You also have the option to translate the report from one currency to another inn final output.
    Hope this helps.
    Assign points if helpful.
    Regards,

  • Report Painter - new Basic Key Figure for Currency Translation

    Hi,
    I need a report painter report which allows to translate the company code currency HSL in GLPCT into several target currencies. Theoretically I need to translate each month with an own translation rate and possible different translation keys.
    In table T804B I tried to create a new basic key figure for GLPCT in order to translate the HSL amount with a second TCURR rate. I copied the original basic key figure GLPCT - CC_HSL. I selected structure GLBDZ and fields CCH++ as data source and assigned new variables for the TCURR selection.
    The report painter report is setup with three columns : one in HSL, one with CC_HSL and one with the new key figure. In the selection screen of the report painter report I can enter two rates. But after execution the translation of the new basic key figures is done with the same rate as the CC_HSL column is using.
    Did anybody encounter an equal problem?
    Many thanks and regards
    Markus

    have you created a new calculation routine in form pool SAPFGRWG equivalent to E06_CALC_CURR_CONV_HSL? doesnt this explicitly get the company code currencies

  • Report painter currency

    Hello Experts,
    I have an issue to change the currency in report created by report painter.
    Report library:1VK
    table : CCSS
    Currently it is in CNY object currency, but I would like to see the report by CO area currency EUR.
    I used T-code: RPC0 to set the report target currency to EUR but it did not changed the currency from CNY.
    Could  anyone help me？
    Best wishes,
    David

    actually, in the report we can select the basic key with currency definition.

  • Report Painter - Translation from Transaction Currency

    Hi,
    I have set up a report painter report using "Translation from Transaction Currecny" as one of the key figures in one of the columns in the report. When I execute the report it prompts me for the target currency and the ER type which is what I was expecting. EG I want to translate actuals to say AUD at budget rate (type P)
    My question is.... I add a second column again using the same key figure ""Translation from Transaction Currecny" which I want to exchange using a different Exchange rate type.E.g I want to translate actuals to AUD using the forecast rate (type Q). However, when I execute the report I was expectiong to be prompted twice for the target currency and exchange rate type but it still only prompts me once.
    Does that mean that using the key figure that I cannot use it in more than one column in the report?
    I hope this makes sense.
    Thanks...

    Add custom reports to an existing Report Tree (SERP)
    For example:
    Add custom report to:  Project System/Information System/Financials/u2026
    Find u201CPS91u201D from SERP
    Add a report to PS91
    The trick is find the existing report tree related to standard main menu.
    Or create a new report tree where you house all custom or selected reports in one place.
    May also consider using area menu (SE43): create a structure, for example, to house all custom reports.  A useful tool to manage custom/specifc reports

  • Currency unit in Report painter

    Hi,
    I met a problem when i maintain a report using report panter. Table FAGLFLEXT is used for the library, and I want to using currency translation function. I use Basic key figure "HSL local currency" and CC_HSL translation local currency for the report. But when i run the report, there is a problem, system tell me that can not find the unit of source currency, so can not translated to target currency. The data of local currency can be displayed.
    i set the format of the local currency column, find that even i click "print the unit", there is no currency unit of the data, so I think there is some problem.
    What is the problem? thank you!

    Hi Amir,
    Thank you for your answer.
    I changed the key figue to "Crcy Transltn TransCrcy (Act.)" as told, and run the report again, but still have problem.
    No valid exchange rate for currency translation from  to USD
    Message no. GR640
    Diagnosis
    The system could not find a valid exchange rate for the currency translation.
    System Response
    The system could not translate into the target currency.
    Procedure
    Check the target currency, the exchange rate date and the exchange rate type.
    I am sure i have maintain the exchange rate type and related rate.
    The setting of "Define Currencies of leading Ledger" is "1 Translation taking transaction currency as a basis".
    I think the problem is that the system cannot find the unit of the currency, so the error massage display as "No valid exchange rate for currency translation from  to USD". If can find the unit of currency, i thought the message should be like "No valid exchange rate for currency translation from EUR to USD".
    If the unit can be found, I think after set the format of the column "print the unit", in the report the unit can be displayed. But in my system, can not display the unit.
    What do you think about this? thanks in advance.

  • Index Currency in Report Painter

    Hi,
    Is there any way I could include the Index Currency as a key figure for my Report Painter reports?

    Hi,
    Before running the repport go to envoriment / option and expert mode.
    Now you get extra buttons select currency translation. Here you can select what you want. You can create variant from this
    Paul

  • Parallel currency in Report painter

    Hi
    I need help around the Report Painter report. One of our company code is located in Hong Kong and there are three currencies set-up for this entity. Local currency is CNY, Group currency is in USD, and Third currency is in HKD. Our report painter report is configured to get the data from FAGLFLEXT. The report painter report always gets displayed in USD amounts. The FAGLL03 report at the back can display amounts in all three currencies. I am not sure how can I set-up the report painter report to display amounts in HKD.
    It would be a big help if someone can advice me on this issue.
    Thanks,
    Best Regards,
    Shalu
    Moderator: Please, search SDN; it has been asked several times

    Hi Shalu
    The Library 0FL has 4 currencies... i.e.
    HSL  - Local Currency  
    TSL   - Transaction Curre
    KSL  - Second Currency 
    OSL  - Third Currency  
    Go to GRR2 (Report form of your report), and double click on any column... You choose Key Figures in the Columns in a areport painter report... there you would have chosen any one of these currencies...
    Right click on the column and Copy it and paste it... Now change the Key Figure of the copied column to the one you desire...
    This should give you values in both currency...
    To identify which form you have used in GRR2 - Execute your report and go to Extras Menu > Technical Information.. In the pop up window that opens, double click on field "Report".
    Regards
    Ajay M

  • Report painter currency issue

    Hello experts
    Situation is like this:
    The customer has 3 different company codes which all use different currencies as local currency. They use only one controlling area (Euro).
    100=EURO
    200=DKK
    300=SEK
    The report painter report is for their administrative costs. what has gone wrong if i run the report for example all cost centers in company code 200 and cant see the total sum in DKK. I assume that the problem is because there are postings in different currencies.
    Could someone tell me how to create a report which shows the total sum clearly in DKK even if there are postings in different currencies. I know that there is S_ALR_87005721 transaction where you can change the currency settings but no success. Plese tell me how to change the formula + any other comments warmly welcome. The postings included in report should be automatically translated to DKK on their posting day currency. There is a challenge for someone.
    At the moment i have only one characteristic in Total definition (GRR2):
    Variable Description         Type      Table   
    1CKSTAR  Cost Element Group  Set  CCSS KSTAR  
    Thanks in advance.

    Hi Gokul,
    Your approach is correct, if you wish to display the data in another currency
    then as you have described you will need to make a copy of the reports / forms (for
    example create a custom form based on the current one) using transactions CJE1
    and CJE4 then modify these custom forms by adding new columns for the value in
    object currency and by deactivating the columns which refer to the values in controlling
    area currency. You can create your own transaction codes for calling these custom
    reports (based on the modified forms).
    Regarding displaying the values in object currency SAP Note 1925431 provides further
    information on this.
    BR,
    Enrique

  • Report Painter for Creating Report in Group currency

    Dear all,
    I have created a report using report painter.  I but currently the figures are in Local currency.  May I ask how can I convert these figures into Group currency? 
    Thanks.

    Hi,
    In the characteristics you have defined if you double click you can see on top BASIC KEY FIGURE select Group Currency and the same shall happen.
    Revert for further help
    Regards,
    Rahul

  • Display the values in Docment Currency in Report Painter-FDI4

    Hi,
    Am new to report painter. i created report painter in FDI4. this report is to display the due amount.
    when i click on table cell, which is amount field . Am chosen cell type as 'Select with Key figure' option .
    After then i try to select key figure for that cell (Popup:Element definition).
    In F4 selection there is only one Key figure which is Amount in LC.
    I need to display the field value as Amount in Document currency.
    How to bring Amount in Docment curreny in that F4. Is it possible.
    I didnt get any thread related to my requirement in SDN.
    pl help.

    Hi there,
    Could you insert the field FAEDT (Net due date) in customer reports? (reports from transaction FDI3). This field is not in a table, only in a structure. I defined it in TKAF like that:
    USGFL
    D
    ROLNM 
    FAEDT_FPOS
    CHTAB
    RFPOSXEXT
    CHFIE
    FAEDT
    ORTAB
    RFPOSXEXT
    ORFIE 
    FAEDT
    DIMPR
    2
    RSLIN
    1
    And I also added it in the RFRRD20, but did not work. Can you tell me how to do it? I will reward with point. Thanx!!

Maybe you are looking for