Report Painter : TCODE "GR55"

Hi All,
Can anyone guide me regarding the report painter.
I need to know what are the fucntions of "OUTPUT PARAMETERS" button.
basically my requirement is that i have a report group"ZCFS"
which is basically displaying some output. some fields are not generating output and are coming blank. i need to know about the 'output parameters' button functionality.
Rgards
AJ

Hi
If the output is blank you need to check the Basic key figure and the chestreic values there might some issue with either of them
Do chk them thoughly
Anand

Similar Messages

Drill down value not matching with Displayed Report Painter Issue-GR55

Hi,
Need your help for an issue in drill down value of report painter from actual cost coloumn.
I have created a new report group based on OSS Note-157720 in GR55 Traction. This new report group will provide data of Planed / Actual cost, Planned / Actual Quantity of the project in range of fiscal year/periods. The issue in this report is displayed data of actual cost is not matching with drill down data. The actual cost coloumn is formula coloumn which framed by subtracting All periods cost coloumn, Before Periods Cost Coloumn and After periods cost coloumn.
Could you suggest on this issue.
Thank you for your cooperation.
Regards,
Rakesh

The report you are running first might have been created with some hidden columns that contain more than one variables relating to period and fiscal year. These may not be matching those that are required to run the drilldown. Look into the definition of the drilldown report. If you would want to match the first report, It may be better to identify which report runs on drilldown and the run that report with the required parameters.

Report Painter Tcode

Hi,
We are in the process of archiving some report painter reports,
The Tcode was created in the Dev system and moved to QA, but the archived program was directly created in the QA system, Now when we run the program thru SE38, we get the execute button in the selection screen,
but if we run the tcode associated with the same program we do not see the execute button,
Not sure what is missing
Appreciate any input
Lali

Hello lalitha..
Could you please help me for the same issue i.e attaching the t.code to a report which has been created through the report painter !!
I have no idea, how to do it ??
Please tell me the process of it !!
Please mail me your reply on [email protected] if possible !!!
Its getting a firing issue at this time !!
Thanks in advance !!
Regards,
M.Soni

Report Painter Issue-GR55

Hi,
I have an issue in report painter-GR55. Our report in report painter will show planed / actual cost, planed /actual quantity. Our material cost planing is done from cost activity of the project builder. Whereas in the report output , some material quantity is showing as planed quantity for which planed cost of the project is showing wrong. We are picking data from RWCOOM Table. Please advise on this.
Thanks & Regards,
Ranjan

Not possible....SAP standard behaviour....

FGI3 Report Painter - Tcode

Hi All,
Does anyone know how to create a tcode for reports created in FGI3?
I tried assigning the program name into a tcode but when I am trying to run the new tcode the selection screen is different from the report painter and it does not retrieved any records.
Thanks.
Regards,
tin

Hi Tin Cruz,
To create tcode for report created FGI3, you can do as following
1. go to tcode SE93
2. Give it a description and Choose the option 'Transaction with parameters (parameter transaction)'.
3. In field transaction, type START_REPORT
4. Check on option 'Skip Initial Screen'.
5. Check on options GUI SUPPORT
6. In section Default values, enter
 Name of Screen field Value
D_SREPOVARI-REPORTTYPE RE
D_SREPOVARI-EXTDREPORT FBRG01FAGLFLEXS <name_of_report>
in which, <name_of_report> is the name you see in FGI3, for example 0SAPBSPL-01 for Fin. Statement: Actual/Actual Comparison.
You can refer to creation of tcode S_PL0_86000028
rgds,
Solaris.

Report Painter for GR55 report

Hi
I am changing the formula of one cell of one column in report painter type report. what is happening with my report there are FIVE columns of profit center AND one TOTAL column , every column has 10 rows, there are three rows of total revenue , gross profit and % value of , Gross profit / Total revenue. this % figure is correct for above mentioned five columns but for total column , it is adding horizontally all the five % figure and gives the %GP figure , which is incorrect, it should be TOTAL OF GROSS PROFIT / TOTAL OF REVENUE in TOTAL column itself. now formula for total column for total revenue or gross profit are correct as it is adding horizontally and giving the total, but for only one cell of the column that is GP % in TOTAL COLUMN needs to be changed, HOW it can be done ?
Thanks
Deepak

You can not change a particular cell only in report painter.
Thanks
Ganesh

Need help in Report Painter

Can anybody help me in Report Painter? I need a link.
Regards,
Subhasish

Please go through the enclosed document. This will give you step-by-step approach for Report painter:
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
Check url
http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
Check Report Painter Step-by-Step example under Tools->Report Painter / Report Writer->Report Painter->Creating a Report Painter Report.
Just go through These Links to learn about report Painter.
http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
I have a standard report and it uses a structure to pull the data for the report. I need to create a custom report which uses the same structure, selection screen but a different layout. Could any of u plz advice, if its doable in report painter or just plain abap program?? Also I am interested to know how the report painter stores the actual report?? as ABAP program?? Please help..urgent..
check the SAP help ..
http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/content.htm
I had made couple of SD reports in report painter 4 year ago .. as far as process is concern you have create library , but it deals with information structure which start with s0* , after defining information structure in library it take to select the fields and display them on your out put . information structure have the statistical data most of the time . As i worked on information structure , so31,32,33 .....
I t creates ABAP program like ABAP query creates in background . if you execute Customer Over due analysis or in Co02 cost analysis report or MC* ( MM stock reports ) those are in report painter .
Hope this'll give you some guide line ...
As far as I know about report painter, It create a report in background..Like when you make ABAP query (SQ01, 02, 03 ) .. It will create a report. You cant modify the report . You have to get OSS id in order to do that. if you're ready do it then you can pass it to Memory and can achieve your goal ...
I think it will give you some hint. I wish I could have authorization to use report painter on my this project so I can help you out practically.
Please see these steps , it`ll help you ...
http://www.thespot4sap.com/Articles/Code_CostCentreReport.asp
The variation objects are coming from the sets.
For example, when you read the report 'Cost Centers: Actual/Plan/Variance'(T-code : S_ALR_87013611), you can find the characteristic 'Cost Center' is set as a 'set variable'. So the cost center in the report left side are coming from the cost center group that you input.
Does any know if we could use Report Painter across two controlling areas? Any documentation available will be great. Yes. When setting up a report in CCA you can have multiple controlling areas. In the General data selection you will have the option for the CA as a selection.
You can also use standard references objects to construct your own reports: libraries, standard layouts, default columns, and row and column models, all in the standard R/3 System, are available for custom reports.
Report Painter report definition requires several Preparatory Steps, depending on the complexity of the report to be generated.
1) Create a library and pick your reporting tables.
2) Create your report
3) define your set up within the report
a)General data selections
b)Colimns
c) rows
d) formulas
Standard layouts are maintained in the IMG "Financial Accounting" under "Special Ledger -> Information System -> Maintain standard layout.
Create libraries, which means assigning the
characteristics
key figures
Predefined columns
For each of these categories you need to select the objects to be used in reports of the specific library. You define the sequence of the objects in the selection lists of the Report Painter in field "Position". Frequently used objects should be at the top of the list.
go to
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22ba743c611d182b30000e829fbfe/frameset.htm
I have created a report through report writer/Painter(GR51). My query here is to link this report to a transaction code. Could you please suggest me how can I acheive this?
Go to SE93 and select the Transaction with Parameters ( Parameter Transaction)
Then in the Transaction field give: START_REPORT
Skip initial screen
Screen 0
In the default value for the parameters give
D_SREPOVARI-REPORTTYPE RW
D_SREPOVARI-REPORT ( Give your Report Group )
If you have any doubt pick any report painter tcode and check in SE93
Follow below steps
1) Execute report through report painter
2) From system status get the program name
3 ) go to se93 and select report transaction and assign
program name .
Is it possible to make bigger the text a I have on a text field?, Im using the screen painter and I need to put the title bigger (as a requirment).
You can define your text as any length.If you are talking about the font,i am afraid you cannot do that.
No, you can not change the size(font) of the text on the dynpro, you can hightlight it, which changes the color to "blue" to make it stand out. You can change this on the attributes tab when double-clicking on the element in screen painter.
what is the sentence that open a screen painter file
Don´t really understand what you mean with "open a screen painter file".
If you are speaking about showing a form generated with the screen painter,
Dim oXMLDoc As New MSXML2.DOMDocument
oXMLDoc.load("Form.xml")
SBO_Application.LoadBatchActions(oXMLDoc.xml)
Dim oForm As SAPbouiCOM.Form
oForm = SBO_Application.Forms.Item("YourFormID")
oForm.Visible = True
regards
vinod

Help needs on Report Painter

Hi friends,
I needs some information on Report Painter.
I already searched in help.sap.com.
but i cannot get these below information.
Please help me out. it is very urgent for me.
1.what are the general Tcodes used in this ?
2.when and where should we use report painter concept over standard reporting ?
3. Is report painter exclusively used for any specific module like Project systems, FI/CO. or it can be used across all the SAP Functional Modules?
4. I tried to create Report using Report painter Tcode CJE4
then i got some basic doubts as below?
a) what is difference between Project report and Summarization reports for project in report painter?
b)Is it mandatory to create Form then attaching this Form to Report?
c)what is difference in Two Axes, One axis with key figure,
One axis without key figure structure ?
d) what is meant by Key figure and Characteristics in this ?
Thanks in advance.
Regards,
Sateesh

Report painter
the below Pdf should help you
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
Reward points..

Report Painter for Funds Management

Hi all,
I try to develop a budget vs actual report through report painter (tcode: FMEN and FMEK).
The problem is when execute the report, there is no budget data, just actual data and variance.
When create the form, I used key figure :
1. Annual budget (current) in FM area crcy with debit type=3 (expenditures), budget version=0
2. Commitments/actuals (PB) in FMAC with value type=66 (profit transfer postings) and 54 (invoice) --> I used the actual from the invoice.
3. Formula: actual - budget
Is there something wrong when define the key figure of budget data?
Many helps.
Thanks

Hi,
The library (4FM) is based on availability control tables; therefore, only commitment items where either budget or posting is registered will be presented. Define correctly the parameters within the selection making emphasis on record type and ledger - it should do the work for you.
Regards,
Eli

Query on Report Painter

Hi All,
user has requested to create Cutom tcodes for 3 custom report painters which user has created in Production system.
i would like to know if i have to create Report group for each report and then create a transaction code for the same or report group is already created by user.
please let me know your inputs.
thanks
Aditya

Hi All,
i have been provided with Program name for Report Painter (tcode CJ20N) = SAPLCNPB_M
and how do i find out the report group of custom report painter. does it have to be created by functional consultant or how do i find out the group name because i need to enter the same while creating the transaction under the default values.
do i have to specify the program name while creating the transaction code.?
please let me know .
thanks in advance.
Aditya

Report Painter Report has the wrong Profit Center

Hi Gurus,
I changed the profit center in a cost center using KS02. When I execute a report group for report painter using GR55, I still see costs showing up under the old profit center. What do I need to do the fix the problem. Is it coming from the report group?

Changes in some fields in cost centres are time dependent. This means that any changes in cost centre will effect only after a certain period of time. for Profit centre it will be updated only after the period. That is if it is period 1 now then it will take effect only in period 2. Check T code OKEG.

Creating Tcode for report painter program in 4.0B version?

hi all,
How to create a tcode for report painter program in 4.0 B?
I searched the forums. but i couldn't find the same for 4.0 B?
Please helo me to solve this?
Thanks,
Vamshi

I am closing as no one answered and worked in alaternative way for the requirement.

Tcode attachment to a report painter---User group Creation

Hi all,
i created a form using fgi4 using Report Painter. And attaching the form to a Transaction Code.
For creating Transaction Code I Did the following Steps.
SE93 ---> taken the option parameter transaction .
1.Taken the default valuse for transcation is START_REPORT
2.skiped initial Scree = kich this one
3.screen = 0.
4.cliclked all GUI check boxes
5.last one , i entered values like this
D_SREPOVARI-REPORTTYPE = AQ
D_SREPOVARI-REPORT = GP469DWDAEAN5E52BZPW1YLB66I
After saving the transaction when i run the tcode it is not getting executed and
on the bottom of the screen am getting as "User group GP469DWDAEAN has not been yet created"
Please Help

Hi venkat,
Do as below
To create a TCode, follow the steps below.
1) Go to Transaction code SE93, Enter TCode Name and Press Create.
2) Give short Description and select Parameter Transaction, Press Enter
3) Select Transation Radio Button and write START_REPORT in the next text
box Also Check the box Skip Initial Screen.
4) On the bottom of Screen (default Values), Enter Parameters
i) Name = D_SREPOVARI-REPORTTYPE. Value = RW
ii) Name = D_SREPOVARI-REPORT Value = Your Report Group Name (Say ZGrp)
5) Save and Execute.

Attach TCODE to a report painter---User Group Creation

Hi all,
i created a form using fgi4 using Report Painter. And attaching the form to a Transaction Code.
For creating Transaction Code I Did the following Steps.
SE93 ---> taken the option parameter transaction .
1.Taken the default valuse for transcation is START_REPORT
2.skiped initial Scree = kich this one
3.screen = 0.
4.cliclked all GUI check boxes
5.last one , i entered values like this
D_SREPOVARI-REPORTTYPE = AQ
D_SREPOVARI-REPORT = GP469DWDAEAN5E52BZPW1YLB66I
After saving the transaction when i run the tcode it is not getting executed and
on the bottom of the screen am getting as "User group GP469DWDAEAN has not been
yet created"
Please Help.

See venkat ,
steps
Goto tcode : ggr3 ..
from the library i took one form .... executed ... from the selection System ->status program name .
i took the program screen name....
se93
new trascation code type report type .... i didnot used parameter type .
saved executed it was working fine .
if you want authorisation group you can give here or else basis will takecare of it .
Girish

Can you create report using report painter with Tcodes:FAGLL03,FCHN

Hi Experts,
1.I want to create report using report painter by using tcodes FAGLL03,FCHN.Can i create with report painter?
2.i never used report painter can anyone provide report painter pdf for ecc6.0
3.can any oneguide me how to develop report in report painter by using this tcodes.
4.If not possible can i do with report writer?
Regards,
naresh.
Moderator: Don't mix report painter with the TCodes wyou mentioned; there is no link between them. Regarding Report Painter - search SDN. Respect the rules and don't cross-post: you asked the same unclear question in several forums!

cross posted
Edited by: nareshvarma on Jul 19, 2010 9:11 AM

Report Painter : TCODE "GR55"

Similar Messages

Maybe you are looking for