Report Painter - Transportable?

hi, is the report painter transportable? pls advise if yes or no. thanks.

Hi,
You will be able to export it and import in DEV. Then, create a transaction based on the report in the transport. Keep in mind, that the program name generated by the report is dynamic, therefore it's essential to build transaction directly on areport and not on program name.
Regards,
Eli

Similar Messages

  • Report painter transportation from 4.6b to ecc6

    Dear Report painter expert
    We have two deferent servers one is 4.6 b and another one is ecc 6.0. In 4.6 b they are created 130 reports by using report painter. Now they are doing Migration to 4.6 b to ecc6 and globalization (clubbing all the servers into one server).
    My query is it possible to transport all the 130 report from 4.6 b version to ecc6.0 or else we have create the all the report manually.
    Regards,
    Venkataswamy

    Hi
    Read the SAP help which talks about "Dependant objects" tick.. It says dependant objects except Cost Center and Cost ele groups are transferred..
    Does the Set 0102DBAGXE_INVEST  pertains to Cost centers or cost elements
    If yes, Go to GS03, and Menu UTILITIES > Export .. Export it in a flat file and import it in ECC 6.0 before importing the reports
    Regards
    Ajay M
    SAP HELP TEXT ENCLOSED BELOW
    Indicator: Export/import all dependent objects
    If you set this indicator, all dependent objects in addition to the desired objects are exported or imported.
    Example
    If you export or import a report group and the indicator is set, all reports in the report group, all sets (or set hierarchies) contained in the reports, the set and value variables as well as the library will also be exported or imported.
    Exception
    Groups from CO (such as cost center groups, cost element groups) are not transported as dependent objects. If you want to transport groups from CO, this must be done explicitly.
    Does the

  • Report painter object name change during transport

    We have a requirement to add 5 fields (In selection screen) to report painter reports ( Reports of CJE3 and GRR3 ).We created Z reports as a copy of standard reports, added required 5 fields by implementing SAP notes and other settings .We have also done implicit enhancements for all these reports to make change in the behavior of new fields .This is working fine in the development client but the problem is once we transport this to Quality system new reports get generated( With new name ) and implicit enhancement will be lost.
    For E.g.:
    In development client for CJE1/CJE2 report the program name will be "GPAVPSATWFP4NN0YRDBIQBHI8MQ"  (In this program we have done implicit enhancement )
    but when we transport it to other client new program "GP8O1UCNZTJYY5LTO8GN0UW2GQB" is generated in which implicit enhancements are not found.
    Rgds
    Sameer

    Hi,
    have you looked at export/ inport functionality (gr57/ gr58) or what mode of transport are you using?
    Regards
    Hein

  • Report Painter:create a transaction, transport DEV to PRD

    Dear all,
    I have created my first report in GRR1 (Report Painter / Writer), modifying a standard report that uses the library 8A2 (EP PCA).
    In all, i created the following objects:
    1) report ZRPRT (created with T. GRR1 (Report Painter / Writer))
    2) report group Z8XY(created with T. GR51), that contains only this report
    3) Account group Z_CO_XY (created with T. KDH1),with the GLPCT table, field RACCT. Z_CO_XY is  input parameter as group account, via selection screen, of the report ZRPRT. 
    Now i would like:
    1. Create a transaction to run this report from the mainmenu.
    2  Transport everything,  from DEV to PRD.
    I would like to have everything in a PRD, also for maintenance reasons.
    If in the future, i need to modify this report, I would be able to bring everything from PRD to DEV to make those changes (if, in the meantime, the objects were deleted from DEV, for whatever reason)
    Please, can you give me an explanation step-by-step what I should do. Any advice is welcome!
    Thank you in advance.

    Add custom reports to an existing Report Tree (SERP)
    For example:
    Add custom report to:  Project System/Information System/Financials/u2026
    Find u201CPS91u201D from SERP
    Add a report to PS91
    The trick is find the existing report tree related to standard main menu.
    Or create a new report tree where you house all custom or selected reports in one place.
    May also consider using area menu (SE43): create a structure, for example, to house all custom reports.  A useful tool to manage custom/specifc reports

  • Report Painter - Library - Error in Transport

    Hi Dear experts,
    I have three reports built with report painter in the development system and these are associated with a z library. When we transported the objects, the Tcodes associated with these reports have been transportd properly. but the reports and the library is missing in the Production system. Now, if i execute these transactions from Production system, its giving runtime error, because the linked reports are missing ( report GP2D4I7Z2RKMI4QGRR05RUURZ8F100 load program not found) When i check the same report in development, its assigned to a local development class($tmp). But there are a lot of reports with such long names in the $tmp. So its very difficult to find which are the actual objects to be transported.
    Is there any easy way to find the reports and transport? And if they contains some includes, do i need to transport them also manually? Is there anything i can do with the library? I couldnt find the transaction to change the library. So how can i transport the library? We have only 3 reports. but i dont know how many other objects are linked with these reports.
    Any kind of help is highly appreciable
    Thanking you in Anticipation.
    Deepak

    Hi Raja,
    the menu "GR22->utilities->transport->transport request"  gives some options like Statndard layout, library, report , report group, key figure, etc. We have one Z library and one Z-report group. I dont know about the other itesm like key figure etc.So which options i have to select and run? ( Iam handling these things for the first time) or do i need to run it for each options?
    Could you please explain more...
    Thanks & Regards
    Deepak K

  • Problem transporting Report painter reports

    Hi experts,
    I have created a report painter report by copying another report and added it to a transport request in GCTR. This transport moved to Quality system. Later, I identified that this request also transporting the library and sets which are already exist in production system.
    Could you please suggest if this can be moved to production. does this make any problem in production
    Thank you very much
    Thanks,
    Bharath

    Hi Bharath,
    If the dependent objects are already available in your target system, you can avoid transporting them.
    While creating the transport request through GCTR, ensure that 'under Further details section, checkbox - With dependent objects is not marked'. 
    Thanks,
    Vinod

  • Is it possible to transport ABAP querys/ Report painter between systems

    Hi all
    Is it possible to transport ABAP querys/ Report painter object between one r/3 system and another ?

    Hi,
    Its possible to transport SAP Query (Global Area). When you save the infoset it will ask you to the request id for transport
    For SAP Queries in Standard area, there is a transport icon in the SQ02 screen which would transport it to required destinations
    thanks
    Sriram

  • How to transport generated reports through report painter

    Hi All,
    We are upgrading from 4.6 to ECC6. Previously somebody created reports for Finance  through report painter, now in the new system they are two to three system generated reports which are produced by report paintyer (I guess) are retrieveing wrong data.
    So I debugged the generated reports and found two locations
    1. generated report as syntax error
    2. at selection it is having an additional filter with company code for each table  like coss, cosp, cospp which I dont find that filter in the old 4.6 generated report, I modified the generated report but problem is that it dont give me any transport number.
    So these reports are client specific, can any one suggest me how to transport these changes to quality and production environment.
    I tried with transaction GCTR , but it is failing when it is released.
    Can any one suggest me.
    Thanks
    Tangudu

    No better manual than SAP help!
    Below is the link to Report Painter
    http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
    Regards
    Sreenivas

  • While doing changes in GRR2 no transport request is generated( report paint

    Hi Gurus,
            when i am changing the report painter (GRR2), no transport request is generated.Actually when i am changing the following........
                  Trial balance......... liabilities          from               to
                                                                 100000           199999 (allready existing)
                                                                  600000           690000 (new range while doing this,not generated transport request)
    please do needful,
    Regards,
    Rmesh.

    Hi,
    Changes in report painter do not generate change request. You can either create a transport automatically by going to GCTR transaction or you can simply export/import the changes by going to GR37/GR38 transactions.
    Regards,
    Eli

  • How to transport report painter

    Dear Experts,
            I have created report using report painter and i created transaction code for that.
    Now i need to transport this to quality. Please help me out for this issue.
    FYI : I searched this in SDN, but i never find any solution for this.
    Thank you all in advance.

    when you want to add a query to the transaction create a new transaction type TRANSACTION WITH PARAMERS(PARAMETER TRANSACTION)
    INSIDE
    give    transaction   =         START_REPORT
    name of the screen field                      value
    D_SREPOVARI-REPORTTYPE     AQ
    D_SREPOVARI-REPORT               Z_ZC_BUSADR_G   Here this is the user group(ex Z_ZC_BUSADR)
                                                          you need to give along with -G
    D_SREPOVARI-EXTDREPORT     Z_ZC1_QUERY  - > this is query name

  • Report Painter- Restricting Business Transactions

    Hi,
    I'm creating a report using report painter & would like to prevent Actual Overhead Distribution data (business transaction RKIV) from being reflected in this report. I can add business transactions in the report through Edit -> General Selection data. How do I block a particular business transaction in this report ?
    Regards,
    Sangeeta

    Hi Sanjeeta,
    there's several ways to do this:
    (1) On the report characteristics window, enter range of values limited the values you want. To add more range, click on the more button, and keep restricting until you have what you want. Then select "no explode".
    (2) My recommended way to do it is to create a basic SET via GS01. Table = GLPCT, Field=ACTIV.
    On the set header, Select "Suppress". Enter the values that you want included, and leave out the excluded values. You can use range of course!
    Then back on the report characteristic screen, enter you SET name and check the flag for entering sets. Select "no explode". With this option, if you ever need to change your Business transaction values, just change the SET and the report will query the updated values.
    If you use a report variant to carry out the same solution, just note that everytime you need to change the values, you have to change the variant, transport, and regenerate the report (assuming that you do not change enterprise level variants directly in production)
    Hope this helps,
    Sam

  • Report Painter form issue

    Hi
    I have changed the form layout in KE85 for one of our report painter report. I have transported the changes to quality. The form changes are appearing as per Development but the screenlayout is not changed.
    Is there anything else I should do like import, or generate the report etc. If so kindly let me know the details.
    Thanks
    N Sankar

    Hi Franc
    Thank you very much for your valuable input. But my report does not have report group. It is a report created by using a form in KE84. This form is attached to a t_code and the same transported to quality. In quality the form changes are appearing in the form. Whereas when I execute the form changes are not called.
    This is what confusing me a lot. Can you please guide me on this.
    Thanks
    N Sankar

  • Unable to create a report painter form (Message no. KH205).

    Dear all,
    I am trying to create a report painter form, but the system gives an error:
    Key figure scheme  contains errors -> check definition
    Message no. KH205
    Diagnosis
    Entry   not contained in Table T237A.
    Procedure
    Check key figure scheme  (in particular line 9062) in table T237A.
    I checked in Tcode KER1 but did not find any Key figure scheme.
    Afterwards, I checked table T237A and T237 and found out that number of hits in table 237A is less than in T237A.
    I think this is the reason why system has such reaction.
    Please help me with this issue.
    Best regards,
    Linh.
    Edited by: tvlinh on Mar 7, 2012 11:22 AM
    Edited by: tvlinh on Mar 7, 2012 11:22 AM

    Hi,
    This issue can occur if you have transported the Key Figure Scheme (KFS) from another system and /or deleted value fields. Has this happened ?
    To fix the issue you need to renumber the T237 in the source client executing the function module RKE_FILL_TABLES_T237FF as mentioned in the note 13838.
    After this try to create a new form and check if that works. If there are still problems with the existing form/report then the best
    way might be to delete and create again
    regards
    Waman

  • Problem in Exporting a Report Group having a Report Painter Report.

    I am having a problem in exporting a Report group having a Report Painter report.When I am trying to export the Report Group using transaction GR57 with all dependent objects,it is displaying:
           group 0102CPDNUEA-CCROSI not transported.
           Transport groups separately if necessary.
    There are 6 such groups which are not transported.Can anybody help me in this regards.Can anybody help me in exporting these Groups.Specifically in Report painter reports what do these Groups signify and how can we see them.Please help me....

    hi,
    I am able to export my report groups with dependent objects successfully.
    I dont know why you are getting error message. Just keep break point at ***** and execute it for single group and find out why it is giving error.
      IF SY-BATCH = 'X' OR NO_LIST = 'X'.  "direct or batch
        SET PF-STATUS 'LIST'.
    *****PERFORM TRANSPORT_OBJS USING 'X'.  "transport all jobs
        IF FILE_EXP <> 'X'.
          READ TABLE WT_E071 INDEX 1.
          IF SY-SUBRC = 0.
            LEAVE.
          ENDIF.
        ENDIF.
      ELSE.                                "online
        SET PF-STATUS 'MENU'.
       PERFORM WRITE_TRANSP_OBJS.
      ENDIF.
    regards,
    ram

  • Error while Client copy request - Report Painter

    Hi friends,
    I am copying a Workbench request from customization client to test client through SCC1. This relates to Report painter report transport for FDI1. However, I am getting the following warning message while transport -
    "Program ended with error or warning, return code: 4"
    As per my understanding, the above message is a warning message. However, I would like to check if any of you have come across this message? Is this a normal warning message without any negetive system impact?
    Request your guidance for the same.
    Thanks in advance
    Hrishi

    Hi Suma,
    Thanks a lot for the response.
    Yes it is a Workbench request. And I am adding the new report to the SAP Standard report menu under Line Item Analysis.
    Also, some COPA tables are getting updated in the background. Is this normal? Are the standard report painter tables related to COPA tables in any manner?
    Thanks in advance.
    Hrishi

Maybe you are looking for