Report Parameters limited CR11 on server

On our report server, we have a list of parameters in a few reports that is fairly long. The entire list doesnu2019t show up. On our local machines I have found this fix for crystal.
http://www.tek-tips.com/faqs.cfm?fid=811
However, I do not see this registry entry on our server. Any ideas how to fix this so the entire parameter list shows on the report on the server?
Using Crystal Reports XI Win 2003 Server.
Thank you,

You are using the original release of CR XI R2.
Download SP4 full build, requires an uninstall first and then install SP 5 and 6 and test again.
To get to the download page click on the Businessobjects tab above and SAP Crystal Report on the left side and then downloads.
Thank you
Don

Similar Messages

How to pass the report parameters through java not by using URL

Hello...
I have an oracle App. Server 10g with report service
I can the report using the URL :
http://host:Port/rwservlet/report=....
and passing the report parameters ...
But is there any way to call the report by pdf format and passing the parameters from java without using the url ???

thank you shahcsanjay for your reply
but I think that web.showDocument can not be used by ordinary java web application ..
I think it can be used only with with "oracle forms" Am I right ?
If no can you please tell me where can I find a useful document about how to use web.showDocument ...
thanks again
Saleem

Information Given in Report Parameters of COPA Report

Can any please tell what information does the Keyword "Memory Table SP" and "Screen Table B" provide which is given under the Tech Data Tab for Overview of Report Parameters? It will give some information about the data rows.What does that information mean?
Another questions is that I am running a COPA report based on Summarization levels. The data that report is pulling in QA from the Summarization Level does not match with the data in Production for the YTD for that period. Is there some limitation of the QA system to display the data or is it some OSS thing?

Hi,
This community is for discussion on Oracle Business Intelligence Cloud Service. This service is currently not associated with Oracle RightNow Cloud Service.
Thanks,
Pravin

Report prompting Report Parameters on clicking Viewer Refresh button

Hi,
We are using Crystal Reports XI release 2 for launching the reports. Dot net Web forms are used for launching the reports. We are using SQL server stored procedure for getting the report data. Report Parameter values are assigned programmatically. Report is launching fine and data are displayed perfectly.
The problem is when I click on the Refresh button available in the report viewer it prompts for all the report parameters to enter the corresponding values. To overcome this issue I tried to use the u201CReuseParameterValuesOnRefreshu201D programmatically and in crystal report viewer control, but still it is displaying all the report parameters details.
To overcome this issue is there any settings available in the crystal report designer or programmatically this can be handled ?
I had verified the followings
1.     Report navigations are working fine (move previous, next)
2.     Report export is working fine
3.     Report Printing is working fine
Crystal Reports Version Used
Cystal Reports XI Release 2 Developer Edition (Product Version : 11.5.0.313)
Operating System :
Windows Server 2003 Standard Edition (Service Pack 2)

You are using the original release of CR XI R2.
Download SP4 full build, requires an uninstall first and then install SP 5 and 6 and test again.
To get to the download page click on the Businessobjects tab above and SAP Crystal Report on the left side and then downloads.
Thank you
Don

SCCM 2012 R2 - Software metering Reports Parameters Value not appear to choice

Hello Every Body
I hope to get answer as soon as possible
I have SCCM 2012 R2 & SQL Server 2012 SP1, my problem is ( all software metering Reports Parameters Values Not appear so I cannot select
Note:-
( All parameters Available Value set to Get Values From a Query)

Has it been over 45 days since you created the active SWM rules? Do all (most) other SWM reports
work?
all other reporting in SWM which doesn't ask for month and year working
only the problem in year & Month Parameters Values
note:-
these reports doesn't need a 45 days to work, alwasy when i install SCCM reports working only from the second day of installation

How to filter a sharepoint list with report parameters

Hello there,
I'm trying to make a sql report on a sharepoint library. I have no problems to connect to the library but i cannot find a way to filter my data source with report parameters. I've searched on the net a lot, found some stuffs about xml but nothing that shows
how to do it with sharepoint. Any help would be greatly appreciated!
Thanks in advance!

Hi mgarant,
As you mentioned, by default, we can use xml parameter "query" to filter a SharePoint list from SQL Server Reporting Services. We can also modify the value for the "query" to use SQL Server Reporting Serivces parameters to filter the SharePoint list.
Below are the detailed steps for your reference:
1.Change the query string to be a string like this:
<Query>
<SoapAction>http://schemas.microsoft.com/sharepoint/soap/GetListItems</SoapAction>
<Method Namespace="http://schemas.microsoft.com/sharepoint/soap/" Name="GetListItems">
<Parameters>
<Parameter Name="listName">
<DefaultValue>{ADBE55DB-63A1-4C14-9DA0-B1B05C13B4C8}</DefaultValue>
</Parameter>
<Parameter Name="query" Type="xml">
</Parameter>
</Parameters>
</Method>
<ElementPath IgnoreNamespaces="true">*</ElementPath>
</Query>
2.In the dataset modification dialog, go to "Parameters" tab.
3.Create a Report Parameter(e.g. CityParam).
4.In parameter tab, create a parameter with:
Name: query
Value: ="<Query>
   <Where>
      <Eq>
         <FieldRef Name='WorkCity' />
         <Value Type='Text'>" & Parameters!CityParam.Value & "</Value>
      </Eq>
   </Where>
</Query>"
Please note, “case sensitive” is required. In this case, the parameter name for "query" must be in lower case. WorkCity is name of a field in the SharePoint list.
For more information about how to retrieve value from SharePoint list, I would suggest you reading the following article and threads:
http://vspug.com/dwise/2007/11/28/connecting-sql-reporting-services-to-a-sharepoint-list-redux/
http://blogs.msdn.com/mariae/archive/2007/12/13/querying-sharepoint-list-from-reporting-services-returns-only-not-null-columns.aspx
I also implemented a sample, you could download it from:
http://cid-3c7e963ff6ccd974.office.live.com/browse.aspx/.Public/SharePoint%20List%20sample?uc=2
Please feel free to ask, if you have any more questions.
Thanks,
Jin Chen
Jin Chen - MSFT

Reports Parameters Storage

Hi,
Can anyone tell me where the reports parameters values are stored in the portal schema?
For example, I can find the parameter definitions in WWV_MODULE_DETAILS$, but I am at a loss as to where the values for these parameters are stored.
Can anyone help?
Thanks in advance,
Martin

Hi Rene,
Storage Report has the max limitation which is 100 since first version. I saw several threads with same concern about that limitation in past years.
I can log this as a customer requirement as well. With enough requirements it may be changed with an update or in further version.
Thank you for your time!
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Hi, i am trying to open and view a report that comes from another server with different odbc connection

hi, i am trying to open and view a report that comes from another server with different odbc connection
i created a crystal report for a mysql database on my machine and everything works great
but we have other reports that come from other machines with different odbc connection
and this its not working when opens the report asks for credentials
and i cannot use the remote ip for these reports that come from other machine
question
if i cannot connect to remote ip to open the report
for each report i have to create a database the report database on my machine and then open the report ?
or there is some other way to open the report ?
i am using visual studio 2013 and mysql and
<add key="MYSQLODBCDRIVER" value="{MySQL ODBC 5.3 UNICODE Driver}"/>
thanks

short
i have a report that it was created on another server with a specific dsn
now i am trying to open the report on my machine
the database from the other server does not exist on my machine
the server machine where the report was created the ip its not accessible
question ?
can i open the report on my machine or its impossible ?
thanks

Reporting Services web service complex xml type report parameters

Hi,
I have the following xml type parameter in my request query that I use in reporting services.
<Parameter Name="accountDetails" Type="XML" xmlns:d4p1="thevalue" xmlns:i="thevalue">
<DefaultValue>
<d4p1:AccountDetailDto>
<d4p1:AccountNumber>12345</d4p1:AccountNumber>
<d4p1:AccountType>Sales</d4p1:AccountType>
</d4p1:AccountDetailDto>
</DefaultValue>
I want to know how I can assign values to the accountDetails parameter from report parameters, I've tried to call it from the dataset parameter properties but it doesn't return any values. I created Parameters!accountDetails.Value on the dataset parameters
properties and assigned it the following value: it only returns empty columns
="<AccountDetailDto><AccountNumber>"& Parameters!AccountNumber.Value &"</AccountNumber><AccountType>"& Parameters!AccountType.Value &"</AccountType></AccountDetailDto>"
You're help will be highly appreciated as I've been trying to solve this for a while now

Hi Alisa,
Perhaps I should explain my problem clearly...
This is my query request that I send to the webservice:
<Query>
<Method Name="GetPerAccountAssetAllocation" Namespace="http://tempuri.org/">
<Parameters>
<Parameter Name="accountDetails" Type="XML" xmlns:d4p1="thevalue" xmlns:i="thevalue">
<DefaultValue>
<d4p1:AccountDetailDto>
<d4p1:AccountNumber>12345</d4p1:AccountNumber>
<d4p1:AccountType>JSE</d4p1:AccountType>
</d4p1:AccountDetailDto>
</DefaultValue>
</Parameter>
</Parameters>
</Method>
<SoapAction>http://tempuri.org/IPortfolioManagementService/GetPerAccountAssetAllocation</SoapAction>
<ElementPath IgnoreNamespaces="true">*</ElementPath>
</Query>
It works well when I run it just like this, that is without specifying any parameters in the report data dialogue window or on the dataset parameters properties, it returns the values and columns correctly.
So my problem is, I need to find out how(xml parameter syntax, steps e.t.c)
I can do to allow users to specify the accountDetails parameter, its quite tricky for me coz its an xml type parameter, Im not sure if I should just specify the AccountNumber and
ReportType parameters separately:
I've tried the following without any success:
1. Under the dataset properties: I tried not to specify a default value for the accountDetails parameter on the xml query, then I added a parameter called "accountDetails" under the dataset parameters properties, then under parameter
value I added the following xml value :
<d4p1:AccountDetailDto>
<d4p1:AccountNumber>Parameters!AccountNumber.Value</d4p1:AccountNumber>
<d4p1:AccountType>Parameters!AccountType.Value</d4p1:AccountType>
</d4p1:AccountDetailDto>
(I also added the AccountNumber and AccountType parameters under the report data dialogue window)
This returns empty columns, is there something I'm missing, or am I doing this incorrectly?

Problem with empty report parameters when passed to PL/SQL function

Hi,
We have come across what appears to be a bug in the JRC. When passing a report parameter to a PL/SQL function as a parameter, empty parameters are changed before being sent to the function. More specifically, an empty string "" ends up as the value "(')" in the PL/SQL function parameter. In our report we print the report parameters on the first page so we know that the parameters are OK before being passed to the database.
The problem exists for version 12.2.203, 12.2.204 and 12.2.205 of the JRC.
We have identified a workaround, but it is not exactly elegant: Before executing the report we modify all empty parameters ("") to " " . In the PL/SQL function, we trim all parameters before using them.
We call the function using a command object with a sql syntax like this example:
select * from table (qa_batch_release.get_qa_br('{?p_report_id}','{?p_reg_set_number}','{?p_cr_number}','{?p_change_id_decode}','{?p_country_id}','{?p_mfg_item_no}','{?p_4_no}','{?p_5_no}','{?p_7_no}'))
The PL/SQL function is a table returning function.
Best regards, Thor

Hi Kishore,
using #COLUMN_VALUE# would probably not make much sense, because normally a report has multiple columns and not just the numeric column which you want to verify if it's negative. But APEX will fire the template condition for each column, because the report template is a column cell template.
What you can do to make it more generic is to use for example
#CHECK_AMOUNT#
in the template and provide a not displayed column in your SQL statement which contains your value which is named CHECK_AMOUNT. For example:
SELECT NAME
, BALANCE
, BALANCE AS CHECK_AMOUNT
FROM XXX;Because this CHECK_AMOUNT column would be a generic name, you can use this template in all your reports as long as you provide this column.
Thope that helps
Patrick

Report parameters in MM/DD SSRS

I have a requirement where there will be two report parameters like From(MM/DD) and To(MM/DD) that will be used to compare against a month and day fields. For example, I have month and day fields stored in a table like
MM DD
01 24
05 29
When the user enters the two report parameters values as say From(01/25) and To(01/29), I need to retrieve records lies between Jan 25 to Jan 29 from the above table.
Can you kindly provide a sample way to achieve this.

Hi Sarayu,
I have tested on my local environment and you can add the filter as below to filter the data of the Month and Day field based on the two parameters.
Details information below for your reference(I assumed that the datatype of the twe parameters are Text ):
Add the filter in the dataset and in the expression input as below to combine the month and day together:
Expression (String)
=Fields!Month.Value &"/"& Fields!Day.Value
Operator: Between
Value: [@From] [@To]
Preview you will got the result as below:
If the DataType of the two parameters are Date/Time type you can use the expression below to filter the data:
=CDate(Fields!Month.Value &"/"& Fields!Day.Value)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

Report Parameters behaving strangely

Hello,
I just completed my report in the designer provided with visual studio 2008, it's a relatively complex report with 6 subreports and has multiple detail sections. The parent report has one parameter which is used in a Database command. The report works nicely when previewing from the designer and only shows up one required parameters as it should. All the subreports have parameters as well but these are all linked to things on the parent report.
The problem is when I try to execute the report from code, it ignores my parameters and proceeds to ask for multiple parameters, both including the parent parameters and all sub report parameters. If I enter these manually just to test if it works, I then get a message saying there's an error in one of the subreport's record selection formula. However I'm not sure how much I believe this as the previewing works completely fine.
I just have no idea what is happening and why I am getting requests for so many parameters?
Marlon

Update ***
I have managed to work through towards getting the report to display in the .NET app now, I needed to check the IsLinked() fucntion before assigning parameters.
However, I have now been presented with an even more weird problem: If I switch database in code, I now get asked to enter a parameter I know is a linked one, if I do I get a message saying the record selection formula references an unknown field. But if I get the designer to change database, then get it to preview, it works flawlessly (both in the previewer and in the application). Until I change the database back to the original one, where I get the same error.
Our application needs to be used in many client organisations with each having different connection strings / databases (all have the same schema obviously) so I need this report to run independent of what the database it was designed / compiled on.
Here is the code I use to switch database within the application, is there anything different to the way I do it to the way the crystal report designer does it? As the designer is obviously doing something behind the scenes.
This code has worked on the 15 or so reports I've designed so far.
               ReportDocument cryRpt = new ReportDocument();
                TableLogOnInfo tLI = new TableLogOnInfo();
                ConnectionInfo cI = new ConnectionInfo();
                Tables tables;
                cryRpt.Load(reportPath);
                    cI.ServerName = (string)builder["Data Source"];
                    cI.DatabaseName = (string)builder["Initial Catalog"];
                    cI.UserID = (string)builder["User ID"];
                    cI.Password = (string)builder["Password"];
                    tables = cryRpt.Database.Tables;
                    foreach (Table t in tables)
                        tLI = t.LogOnInfo;
                        tLI.ConnectionInfo = cI;
                        t.ApplyLogOnInfo(tLI);

"Report Parameters" - only default showing / translation

Hi,
I did a BI Publisher with the "Analyzer for Excel" and I have 2 issues.
1. I'm calling the report from an ApEx application with the following URL:
.../R_Rapport_analyse_E.xdo?_xpf=&_xpt=1&Calendrier=130001&No_demande=5
The data showed under "Report Data" are ok, but not the ones under "Report Parameters" (Calendrier and No_demande). The default ones are displayed.
2. Is there a way to translate "Report Parameters" and "Report Data". I've tried to change them and save the template, but it's not working.
Thanks in advance.

Post Author: sreenivas
CA Forum: Publishing
your steps ok
but do this one
you should be able to update the universe details (tools > universe > (universe)> refresh > import etc) and then run your report to get rid of partial results...

CR 2008, Universes, and report parameters....

All,
I would like to use a universe(s) as a data source for our crystal reports (CR 2008 - BOE 3.0/3.1). We have an application that collects the report parameters from users and then schedules the CR report using the JAVA API. My question is this:
what construct do I use in the universe to represent this statement in a where clause of the report query (I assume it's one of the @ functions):
where...
and loc_name in '(?locNameList)'
?locNameList is a multi-value parameter defined in the report.
Any comments, pointers to onlince documentation or examples, and book references would be appreciated.
thanks,pf

Paul,
Did you get any feedback on this, I am looking to do the same thing.
Thanks,
Ian S

Value sets and Report Parameters

Hi
these are my requirements
i have developed report using scott where the
parametes are
dname
empinfo
(1)If i select Department 1o then
in parameter empinfo should display the value only from department 10
(2) i have created a value set for report parameters empinfo
it only shows two columns like EMPNO AND eNAME AND THERE only two column space to be shows
how could i make columns to be displayed in addition to ename and empno
Regard

Hi KittyCat101,
If I understand correctly, you want to use a parameter to filter Status field that starts with “Is” or “Can” or “Fi”. If in this scenario, we can refer to the following steps to achieve your goal:
Modify the available values for @Status parameter to “Is”, “Can” and “Fi”.
Right-click the tablix or dataset to open the properties dialog box.
Select Filter in the left pane, then add a filter like below to filter Status field:
Expression: =Fields!Status.Value like (Parameters!Status.Value & "*") Type: Boolean
Operator: =
Value: true
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Report Parameters limited CR11 on server

Similar Messages

Maybe you are looking for