Report Plan/Actual IW33

Hi all.
In transaction IW33, Costs tab, report Plan/Actual, I need to add a field in layout. This field is 'Operation/Activity Number' (VORNR) which isn't possible select in ALV layout. Please, does somebody know how I can add this field?
Thanks a lot.
Marta.

Marta;
T-code standard that is impossible. Or you check in transaction reports (Logistics -> Plant Maintenance -> System Information -> Report Selection) or make a query.
Regards.
Luciano Nobrega

Similar Messages

  • Create Report Plan & Actual Balance Sheet

    Hi,
    I want to create report BL with plan data.
    I use t-code FSE5N to input plan but in FSI3 plan data is not come out.
    Please help me, or there's another report painter that I should use.
    I use ECC 6 btw.
    Thanks for your help.

    Hi ,
    FSE5N is old T code use new T code
    New GL Planning     GP12N
    New GL Planning- Automatic Upload     GLPLUP
    Also Refer Reports
    Annual Plan/Actual Comparison ( Always provides report upto date)     S_ALR_87012253
    Half-Year Plan/Actual Comparison     S_ALR_87012254
    Quarterly Plan/Actual Comparison     S_ALR_87012255
    Periodic Plan/Actual Comparison     S_ALR_87012256
    Hope its useful.
    Regards
    Milind Nair

  • Reporting planning/actual figures for Expenses (Cost center wise)

    Hi,
    We have uploaded Planning for Costcenters for few accounts, which we want  to seen through F.01 in trial balance format.
    Where we can see planning figures for profit center as well as cost centers for given Financial Statement Version (FSV)
    Actuals vis a vis the planned ones
    Is there any other report on Profir center basis where we can view for the month Actuals & Budgets?
    Upload is done in Verrion 1 (managment Planning)
    Regrads,
    Mayur

    No PCA is not activated. ( as it duplicates the data. We are using ECC 6)
    Yes Cost centers are attached to Profit Centers.
    I am looking for both PC & CC wise Actuals vs Budget for a month in Trial balance format in a single report output.
    Regards,
    Mayur

  • Report for Actual/plan Comaprision

    Hi
    We have defined power consumption as one of the activity types in KP06 and given a rate for the same. Is there a standard report which would give a difference between the plan and actual data in terms of Aty (KWH Consumed) and Value (In INR) for the same in PP
    Regards
    Vaibhav

    Hi Vaibhav,
    For individual orders you can go to co03, in header click on Go To - Costs, here you can branch to analysis & modify the layout to get the details of plan / actual as per your need.
    Also you can check via KKBC_HOE or you can use
    Variance Analysis
    Plant / Actual
    s_alr_87013145 - cumulative
    s_alr_87013146 - periodic
    WIP Analysis
    Plant / Actual
    s_alr_87013151 - cumulative
    s_alr_87013152 - periodic
    Planned Costs
    s_alr_87013154 - cumulative
    s_alr_87013155 - periodic
    Actual Costs
    s_alr_87013157 - cumulative
    s_alr_87013158 - periodic
    Hope the above helps.
    Regards,
    Vivek

  • S_ALR_87013340-PRCtr Group:plan/Actual Caomparison Report performance issue

    I'm trying to get the "actual line item" details from the S_ALR_87013340-PRCtr Group:plan/Actual Caomparison Report and I get a
    ABAP run time error. I tried to running for just one month and on several accts. please help to me. how to get the report.
    or how to improve the performance of this program.
    Thanks in Advance

    hi,
      first we need to know what part of the code is taking time. Do run time analysis using SE30 transaction to know what part of coding is taking more time. use can ST12 transaction to get more detailed analysis.
    Since this is standard SAP report also check any OSS note exist for the performance problem.

  • Plan/actual variance per month in a single report

    Hi gurus,
    MY client requirement is to get the plan/actuals/variance on monthly basis.
    can we get that
    i said S_ALR_870100185 actual costs montly
             S_ALR_870100186 planned costs monthly
    please dont say we can achieve it with a new development because i even have the same answer
    they need a joint report of these two can we get that
    its an urgent issue
    thanks in advance
    regards
    hussain

    Hi,
    Check these URL's,
    https://docs.google.com/leaf?id=0B5VK9X3nnz9rOTIyZGU5ODMtZGUxZC00OTJiLTg5OWMtNjBkOGVkNTRjZjIw&hl=en_US
    https://docs.google.com/leaf?id=0B5VK9X3nnz9rNzAxMmNhZjEtMTA2Ni00OGE1LWE2ODctMDM2MTNkNTI4ODQw&hl=en_US
    I have uploaded them in google docs.
    Check if you can open them.
    Regards,
    Gokul

  • Commitments at activity level in report S_ALR_87013533 - Plan/Actual/Commit

    Hi All,
    When i executed the report S_ALR_87013533 - Plan/Actual/Commitment/Rem.Plan/Assigned, the commitments are shown at WBS level but not at activity level. Is there any setting required to see the commitments at the activity level?
    Where as the planned costs are shown against the activity in the same report.
    Please suggest the required settings if any?
    Regards,
    Ramana.

    HI Rifaee/Martina,
    In CJI5 the line items are shown under the WBS. But i would like to see the line items in the report.
    Even after running the report cjen the database is not updated for line itemwise commitment in the report.
    How to assign the PR/PO as account assignments to activity? Where do i need to do this setting? Please inform.
    Regards,
    Ramana

  • Problem while running the Profit center Plan/Actual Report in Background

    Hi
    While executing the T.Code s_alr_87009722 (Profit Centre plan/Actual Comparision Report) on fourground it is giving all the profit centers/groups in the particular profit center group. But when i run the same report in back ground mode it is picking only the last profit center in that group. Please help me regarding the same.
    Regards
    Surya

    hi prakash ramu,
    even it is not working. it is directly talking me to spool request..
    i think it is not possible, while ur running the report in background.,
    any how if possible could u pls send me the code...
    thanks
    ramu

  • Plan, Actual & Commitment Report in Multiple Currency

    Dear SAP gurs,
    Is there any report where I can see Plan, Actual & Commitments in Multiple currency (see below format). In standard SLAR reports, values are displayed in one currency at a time either I can see in INR or USD.
    Here each WBS is planed in USD as well as in INR. If PO is raised in USD, then actual value should be shown against planning done in USD.
    WBS Elem     Plan          Actual          Commitment     
         USD     INR     USD     INR     USD     INR
    WBS1.1     3000$     1000INR     500$               500INR
    WBS2.2          50000INR          10000INR          300INR
    Thanks,
    Venkat

    Dear Venkat
    Each of the views in the hierarchy reports (such as 12KST1C) can       
    only contain values for one currency at a time (because totals for    
    multiple currencies would not make sense).     
    Since only one currency can be displayed at a time, the Trans.currency view is not meant to show values in multiple currencies; rather, the Trans.currency view only provides a reference to the user of the currency involved in the Plan and        
    Actual postings. For example, if the actual postings had been in      
    mixed currencies like:                                                                               
    Doc. date  Cost elem.    Value COCurr  CO.Cr      Value TranCurr  TCrcy  
       01-07-2007 911010000                 800   XXX                        1700  YYY
       01-07-2007 911010000              3,000   XXX                        3,000  XXX
    Then the Trans.currency view would have contained:                                                                               
    Trans.currency         Plan             Actual                      
      YYY                            0             800                   
      XXX                         3,700           3,000
      Result                     3,700           3,800
    You can always switch between currencies in the report Settings ->    
    Currency, but only one will be displayed at once.                                                                               
    I hope this explanation helps you to understand the standard system   
    behaviour.                                                            
    Regards
    Martina

  • Report on actual & planned work

    Hi ,
    I have maintained service activity in the project. In the internal activity tab I am maintaining the amount of work in WORK field and the duration of the work in DURATION.
    Then I am confirming the activity day wise ( partial confirmation).
    Now I want a graphical report of actual work done against the planned work.
    The planned work is to be divided on day wise basis to produce a clear picture of whether the amount of work done on per day basis is lagging or not.
    pl. help me out with this scenario.
    Regards,
    Abhra

    Abhar,
    You can check in CN41, CNE5
    Regards'
    Syed

  • S_ALR_87013532 report -plan cost not rolling upto the WBS/Project level

    Dear All,
    Plan cost from production orders is not rolling up to the WBS/Project level in S_ALR_87013532 ( Plan/Actual Variance report).
    Where as plan cost from network is properly rolling up to the WBS/Project level in the above report. 
    Please suggest what could be the reason for this issue. Is any configuration needs to be done for this.
    Thanks & Regards,
    Vishal

    Dear sir,
    Thanks for the reply & sorry for late response from my side.
    OPSV settings are already maintained in our system.
    Some how i realized  later that cost are actaully getting rolled to the WBS level, but we have observed one more discrepancy.
    Example -
    Production order "X" value - 100 (  as seen through co03)
    Production order "X"value- 40 ( as seen through report s_alr_87013532).
    We found that  in report  s_alr_87013532 , although my total  producton order value of 100 is represented at the WBS /Project level, but at the production order level , it is showing value of 40. 
    On further analysis we found that for production order X
    Materail cost- 60
    Labour cost-40
    The material cost of 60  is not getting fetched against production order "X" in report " S_ALR_87013532".
    There are very few cases , where such discrepancy is seen.
    Kindly suggest.
    Regards,
    Vishal

  • Regarding Tcode S_ALR_87013018 List:Total Plan/Actual/Commitments

    Hi All,
    I have to write a Z Report which will be substitute of the transaction S_ALR_87013018(List:Total Plan/Actual/Commitments.) and need to add 2 new columns in the output of the current transaction.
    I am stuck up for the logic of retrieving the following columns in the output list by providing the value of internal order/order group on the selection screen :-
    1) Overall plan---The overall summary plan value for the life of the order.
    2) Actual----
    Total expenditures recorded against an internal order.
    3) Commitment-Total commitment recorded against an internal order.
    Please provide me the logic and table names from where I can retrieve these values on the basis of internal order numbers.
    Your responses are appreciated.
    Regards,
    Amitanshu

    Hi,
    As far as I can see all three columns you have mentioned are included in standard report. So why donu2019t you simply copy report 6OPL-001 to your own report via TA GRR1.
    Btw, you should also create your own report group as it is not advisable to include customer specific reports in SAP standard report groups.
    With best regards
    Karl

  • Financial Statement: Plan/Actual Comparison (EhP3)

    Hi,
    I need to use the report Financial Statement: Plan/Actual Comparison (0FIGL_M30_Q0002).As i check in SAP Help, shows the report for this data source (0FI_GL_50) which is not availabe in ECC6.HELP.SAP shows the data for this report is extracted from 'FAGLFLEXP' table.To extract this data source SAP ask to implement package3.I would like to know how to extract data from the table without upgrading package3 or any other ways to implement this report.please specify the steps how to get the data source into BW.
    Tq.

    Hi
    these reports are available in BW from EhP3 onwards... You need to implement the EhP3 package and you get lot many good reports in Finance....
    When there is a std solution from SAP, I wont recommend to do any other development in this regard
    BR, Ajay M

  • Error in S_ALR_87013340 - Profit Center Group: Plan/Actual/Variance

    Hi Sapians
    When I execute the following report by enter following data
    Controlling Area ZZZ
    Fiscal Year 2009
    From period 03
    To period    03
    Or values (Profit Center)
    Profit and Loss account Group (say 127)
    S_ALR_87013340 - Profit Center Group: Plan/Actual/Variance
    I know there is no posting in March 2009 but system show considering Jan to Mar 09.
    Actualy I need to check posting for the month March 2009 or Feb 2009
    Regards

    An SAP standard report writer is used in the transaction. The report group that is used is 8A26 (T-code GR53 for display).
    There is a column set 8A-STOCK.GLPCT that uses the basic set 8A-VT-BIS.GLPCT for the field period (GLPCT-RPMAX). This is set to from value 0 to &8A-BIS (variable). Therefore when you enter 3 for march, it takes the value cumulative to 3 or whatever period you enter.
    You could copy this report  and change the values suit your requirement.

  • S_ALR_87013326 - Profit Center Group: Plan/Actual/Variance

    Hi,
    I am looking to branch off from a line item in the S_ALR_87013326 - Profit Center Group: Plan/Actual/Variance report to the actual posting document. Is there a way to do this?
    Thanks,
    Ram
    Message was edited by:
            Ram R

    Hi Nadini,
    Thats cool. I have assigned points.
    Another question. S_ALR_87013326 shows balance sheet accounts as well with zero balances. Is there a way to eliminate these accounts or populate them with the relevant values.
    Thanks,
    Ram

Maybe you are looking for