Report poor data coverage

Where can I report poor data coverage for my verizon 4G LTE hotspot?
Salem Oregon, 97305.
Specifically the Corner of Cordon Rd and Hazelgreen Rd NE.  A little place called EZ Orchards has very poor data coverage. DOesn't matter inside, outside or upside down they unit get only 1 bar of data and cycle between 4G LTE AND 3G, it even show 1x evdo and basically useless.

    We're here to do a service checkup nglayton! May I ask have you contacted our customer service dept yet? If not then let's look into this together. May I ask what model hotspot/jetpack do you have? Any liquid/physical damage on the device? Do you have any issues in another area outside of the zip code that you provided? As you share the details then we can investigate.
Thank you…
ArnettH_VZW
Follow us on Twitter @VZWSupport

Similar Messages

  • Poor data coverage, Amherst MA town center

    Experiencing very poor data coverage, including regular texts, in downtown area of Amherst, MA.  Most of rest of town has good LTE coverage, but past couple of months signal drops to a 1G in the town center, and can rarely get any data to pass, sometimes even basic texts come back as undeliverable.  I have asked others and they say they have the same problem, so not just my phone (IPhone 5).  Being in public safety and working downtown this is a big issue.  It used to be much better coverage here.  I let it go for awhile thinking they were working on a  tower or something but it has now been a couple of months at least.  Looking for an official phone number or email to report it to Verizon but cannot find one.

        KindaUnhappy , I'm sorry you're having issues with your signal. I understand how frustrating it can be to have a phone and cant use the internet which is very important. I recommend power cycling periodically, performing a battery pull, clear the cache and browser history periodically, and close apps your not using daily. I will list steps below. Are your issues occuring inside or outside? Have you every performed a  hard reset on your phone?
    1) Steps to clear cache/browser history http://tiny.cc/k6jwkw
    2) Steps to clear temporary internet files http://tiny.cc/p7jwkw
    3) Steps to perform a factory rest http://tiny.cc/b9jwkw
    Please let me know if the above steps help resolve your issue.
    KinquanaH_VZW

  • Poor data coverage in Wadsworth, IL What are Verizon standards, what are Verizon's plans.

    Verizon customer since about 1988, ready to blow my top because I am paying for a data plan for years and years and get very spotty coverage at home. I have had big problems since 4gLTE was introduced, been patient for over 2 1/2 years and now just really want to stop hearing the 4G hype, and start actually seeing some bars of signal when I am at home, enough already. I did a speed test today after about 90 minutes of not being able to use LTE or CDMA for data and it's time for some answers. Speed test results:  Download speed:  0.51 Mbps  (yes thats a zero in from of a decimal)  Upload is 0.17 (another 0  leads that number as well).  I ordered a Samsung Galaxy Note 3 to arrive in a few days, and by god I just read in these forums that the phone does not pick up signal well. That is all I need. How about getting real about infrastructure in the Gurnee, IL area and north. I live less than 2 miles from Highway 41, why does nothing work here?

    I have put phone to safe mode and no difference in signal. I am out of safe mode now and at -110dBm 4g. At least it is connected to LTE. Could customer service please open a ticket to check tower (s)  affecting 1 mile south of Wadsworth,IL and I will check back in a day or two, when I also have the Note 3.  I get so mad going to the Verizon store exactly 7.4 miles away, full signal there, just banging.  Bet there isn't another tower any closer to me than that one the store uses to light up all their stuff.But this has been going on for over 2.5 years, just to re-iterate.

  • Poor data coverage in Bellevue, WA, dowtown area.

    I'm getting full/almost full signal outside, but almost to internet. Internet speed is below 5kb/s, very unstable, drops every few minutes.
    106-112 streets, around 8th ave, downtown Bellevue
    Anybody experiencing same problems? Any way to resolve this with Verizon?

    That's a known dead spot. I called in in several times but they told me it's between towers and given that there's quite a lot of buildings and the position of the towers, there's no easy way of resolving it without building additional towers in the area and the added expense to build the towers. I'm at the Transit center (108th and 6th)  and I can barely get internet access and phone service from time to time. It could be that it's over-loaded/over-subscribed. i know I had difficulties yesterday around 106th and 4th which caused my phone to become unregistered and I had to call customer support to have my phone re-associated.

  • Reporting poor to no Verizon coverage

    Since Verizon makes it extremely difficult to report poor coverage, I figured I would just place the area here in hopes of an agent reading and reporting the problem.
    There is little to no Verizon coverage of all types (4g/3g/2g) over pretty much the entire campus of the University of California, Riverside, and yes, including outside of classrooms/buildings.  The address of this campus is located at 900 University Ave, Riverside, CA 92507.  There are some spots on campus where there is absolutely zero coverage, including voice calls.  It seems that this is known by Verizon, as I have seen coverage problem reports dating back to 2009 regarding this area in these forums.  Certainly Verizon can do something to remedy this.  It would be nice to actually be able to USE my phone outside of the wifi connections within the buildings.  And no, my Samsung Galaxy S3 is not the problem, as it works perfectly fine in areas outside of the campus "dead zone".
    Let's go Verizon.  You have the highest rated customer satisfaction of any other mobile phone provider.  Let's keep it that way and fix densely populated area dead zones.

    Plopping a tower somewhere is not an easy task anymore with the NIMBY crowd. It can takes years, Not one or two, but many years and sometimes the companies just have to chalk it up as a lost cause.
    It Could be zoning issues there, or any number of issues that precludes VZW from adding more service towers. Even the Pres of the school could be supported heavily by ATT or another cell company and they simply refuse to allow VZW to play

  • 3G switching back to EDGE because of poor ATT coverage major battery drain?

    I have the orig iPhone, my friend cam to my office today with the 3G iPhone. We kinda marked off all the areas that the 3G would drop and EDGE pick up. The 3G phone basically had more areas that it did not have coverage than it did. Every time the phone would re-scan, and EDGE would pop back up. It probably dropped to EDGE 20 times as we walked different areas over lunch. After seeing that 3G does not have good coverage anywhere by my house or office I think I will wait for the 3G coverage to get better... I am in Orange County So Cal, was thinking the coverage would be perfect?? Also, it seems all the back & forth with the phone trying always to be on 3G when the coverage is poor drained the battery to 20% in a 2 hour period, with push off, screen down, wifi off local settings off.
    Anybody have any benchmarks on the amount of draining happens during the phone trying to always scan for a 3G connection?

    While I don't have any true benchmarks, I can say that I've tested the battery life with personal usage both with 3G on and 3G off for a day to see what was up with my extremely poor battery life. I can say that turning 3G off made a huge difference for me. It increased the battery life of my iPhone 3G to about what it was with my original iPhone. I can say that I'm probably getting roughly 1.5x - 2x the battery life I was with 3G enabled by just turning it off.
    With 3G on but little to no coverage, the phone is ramping up the work it's doing to try to obtain and keep that connection. If it's just not available, you'll definitely see the phone's battery draining faster than normal as it tries to acquire signal. Remember the days of poor phone coverage in general? Phones drained batteries in much the same way.
    Sure, it ***** to turn 3G off since it's something that I'm basically paying for but I'd much rather have a phone that makes it through an entire day of usage rather than one I'm finding I have to be careful about how much I use it just so I don't have to charge it twice in one day. It's more desirable to me to be able to use my phone for a longer period of time than to have a fast data connection. Besides, WiFi isn't as big of a battery drainer as the 3G connection is so I'm perfectly content with switching that on if I need fast web access. Also, there's nothing stopping me from turning 3G back on when I'm in a good coverage area (basically anywhere outside around here... I'm in Orange County, too) at which point the battery performance is better anyway.

  • MB5B Report for Date Wise Stock and Value

    Hi,
    I am Taking MB5B Report for Date Wise Stock and Value.
    But I have one doubt all stocks is coming or not in these report like Unrestrected Stock,Return Stock.Blocked stock,Transist stock,Restrected Stock,qty Inspection Stock.
    I have another Doubt in these report three Stock type indicaters are there like these.
    1.Storage Location / Batch Stock
    2.valuated Stock
    3.Special Stock.
    But i have one doubt what is defferent these
    1.Storage Location / Batch Stock
    2.valuated Stock

    Hi Prasad,
    Yes MB5B report consider the Unrestricted, Quality, Blocked, Transit stock and restricted stock. Not sure about Return Stock.
    If you select the Storage location/Batch stock radio button then the system will display all the possible stock from the storage location and the corresponding batch also.
    If you select Valuated stock radio button then system will show only the valuated stock not the Non-valuated stock. Because Non-valuated material type is available in SAP system will not show those stock suppose if you select the Valuated stock radio button.
    Regards
    Karthick

  • How to generate a report from data entered by users in XML forms

    hi,
      i have a requirement to generate report from xml forms which are created using XML forms Builder and stored in Km folders. management want to see in a single report all the activities of all the users in the xml form in such a way that one row in the report presents data blongs to each user.  i have no idea regarding this.
    can any one help me in detail.
    Thanking you in adavance
    sajeer

    Hi Sajeer,
    You have given quite few information what data should be collected / showed in detail. Anyhow, it sounds as if you want to provide data which isn't provided within the standard portal so far (see http://help.sap.com/saphelp_nw2004s/helpdata/en/07/dad131443b314988eeece94506f861/frameset.htm for a list of existing reports).
    For your needs you probably have to develop a repository service which reacts on content / property changes and then you would have to log these changes somewhere, for example in a DB. On the other side, you then could implement a report iView which accesses this data and displays it as whished.
    Hope it helps
    Detlev
    PS: Please consider rewarding points for helpful answers on SDN. Thanks in advance!

  • How to create a report with data using the Crystal Reports for Java SDK

    Hi,
    How do I create a report with data that can be displayed via the Crystal Report for Java SDK and the Viewers API?
    I am writing my own report designer, and would like to use the Crystal Runtime Engine to display my report in DHTML, PDF, and Excel formats.  I can create my own report through the following code snippet:
    ReportClientDocument boReportClientDocument = new ReportClientDocument();
    boReportClientDocument.newDocument();
    However, I cannot find a way to add data elements to the report without specifying an RPT file.  Is this possible?  I seems like it is since the Eclipse Plug In allows you to specify your database parameters when creating an RPT file.
    is there a way to do this through these packages?
    com.crystaldecisions.sdk.occa.report.data
    com.crystaldecisions.sdk.occa.report.definition
    Am I forced to create a RPT file for the different table and column structures I have? 
    Thank you in advance for any insights.
    Ted Jenney

    Hi Rameez,
    After working through the example code some more, and doing some more research, I remain unable to populate a report with my own data and view the report in a browser.  I realize this is a long post, but there are multiple errors I am receiving, and these are the seemingly essential ones that I am hitting.
    Modeling the Sample code from Create_Report_From_Scratch.zip to add a database table, using the following code:
    <%@ page import="com.crystaldecisions.sdk.occa.report.application.*"%>
    <%@ page import="com.crystaldecisions.sdk.occa.report.data.*"%>
    <%@ page import="com.crystaldecisions.sdk.occa.report.document.*"%>
    <%@ page import="com.crystaldecisions.sdk.occa.report.definition.*"%>
    <%@ page import="com.crystaldecisions.sdk.occa.report.lib.*" %>
    <%@ page import = "com.crystaldecisions.report.web.viewer.*"%>
    <%
    try { 
                ReportClientDocument rcd = new ReportClientDocument();
                rcd.newDocument();
    // Setup the DB connection
                String database_dll = "Sqlsrv32.dll";
                String db = "qa_start_2012";
                String dsn = "SQL Server";
                String userName = "sa";
                String pwd = "sa";
                // Create the DB connection
                ConnectionInfo oConnectionInfo = new ConnectionInfo();
                PropertyBag oPropertyBag1 = oConnectionInfo.getAttributes();
                // Set new table logon properties
                PropertyBag oPropertyBag2 = new PropertyBag();
                oPropertyBag2.put("DSN", dsn);
                oPropertyBag2.put("Data Source", db);
                // Set the connection info objects members
                // 1. Pass the Logon Properties to the main PropertyBag
                // 2. Set the Server Description to the new **System DSN**
                oPropertyBag1.put(PropertyBagHelper.CONNINFO_CRQE_LOGONPROPERTIES, oPropertyBag2);
                oPropertyBag1.put(PropertyBagHelper.CONNINFO_CRQE_SERVERDESCRIPTION, dsn);
                oPropertyBag1.put("Database DLL", database_dll);
                oConnectionInfo.setAttributes(oPropertyBag1);
                oConnectionInfo.setUserName(userName);
                oConnectionInfo.setPassword(pwd);
                // The Kind of connectionInfos is CRQE (Crystal Reports Query Engine).
                oConnectionInfo.setKind(ConnectionInfoKind.CRQE);
    // Add a Database table
              String tableName = "Building";
                Table oTable = new Table();
                oTable.setName(tableName);
                oTable.setConnectionInfo(oConnectionInfo);
                rcd.getDatabaseController().addTable(oTable, null);
        catch(ReportSDKException RsdkEx) {
                out.println(RsdkEx);  
        catch (Exception ex) {
              out.println(ex);  
    %>
    Throws the exception
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: java.lang.NullPointerException---- Error code:-2147467259 Error code name:failed
    There was other sample code on SDN which suggested the following - adding the table after calling table.setDataFields() as in:
              String tableName = "Building";
                String fieldname = "Building_Name";
                Table oTable = new Table();
                oTable.setName(tableName);
                oTable.setAlias(tableName);
                oTable.setQualifiedName(tableName);
                oTable.setDescription(tableName) ;
                Fields fields = new Fields();
                DBField field = new DBField();
                field.setDescription(fieldname);
                field.setHeadingText(fieldname);
                field.setName(fieldname);
                field.setType(FieldValueType.stringField);
                field.setLength(40);
                fields.add(field);
                oTable.setDataFields(fields);
                oTable.setConnectionInfo(oConnectionInfo);
                rcd.getDatabaseController().addTable(oTable, null);
    This code succeeds, but it is not clear how to add that database field to a section.  If I attempt to call the following:
    FieldObject oFieldObject = new FieldObject();
                oFieldObject.setDataSourceName(field.getFormulaForm());
                oFieldObject.setFieldValueType(field.getType());
                // Now add it to the section
                oFieldObject.setLeft(3120);
                oFieldObject.setTop(120);
                oFieldObject.setWidth(1911);
                oFieldObject.setHeight(226);
                rcd.getReportDefController().getReportObjectController().add(oFieldObject, rcd.getReportDefController().getReportDefinition().getDetailArea().getSections().getSection(0), -1);
    Then I get an error (which is not unexpected)
    com.crystaldecisions.sdk.occa.report.lib.ReportDefControllerException: The field was not found.---- Error code:-2147213283 Error code name:invalidFieldObject
    How do I add one of the table.SetDataFields()  to my report to be displayed?
    Are there any other pointers or suggestions you may have?
    Thank you

  • Capacity Utilization Reports no data

    Hi all, starting a new thread as none of the similar threads have been able to resolve my issue.
    We have System Center 2012 SP1 on Server 2012, SCOM VMM, SM, Orchestrator, App Controller etc.
    When I run the Capacity Utilization report I only have data returned for PIF, Net transfer, Capacity Utilization and Dick IO all return;
    No data available. Possible causes include::
    The performance rules for the report have not been enabled in the VMM Reports MP.
    No computers match your selection criteria.
    I am adding the Hyper-V host to the report, I have also added the Windows server objects to the report.
    The SCOM host has the execution policy set to Unrestricted as per one post I have found. Pro Tips do work when tested.
    I did find this blog :
    http://blogs.technet.com/b/rexzh/archive/2013/08/20/scvmm-2012-sp1-capacity-utilization-report-missing-data.aspx
    But where do we locate the stored procedures?
    If I look at the monitoring views I see performance data against the Hosts.
    Please assist

    Hi,
    Please run the following command on the management server.
    set-executionpolicy Unrestricted
    If the issue persists, I suggest you post in VMM forum to get more insights.
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/home?category=virtualmachinemanager
    Niki Han
    TechNet Community Support

  • AP Aging report - key date for user entry

    Hi All,
    We have a requirement to calculate aging buckets like 0-30,31-60,61-90...etc.
    I know the key date for this report is created on net due date in SAP standard report.
    In standard SAP report , key date is always a system date(SY-DATUM).
    What we need for this report is , we need to get all the invoices which are outstanding as of that date(the date which user enters).
    If user enters today's date(08/28/07) , he should get all the invoices outstanding till that date in aging buckets and if user enters some date in the past like 07/26/07, he should get all the invoices outstanding as of that date.
    Can  someone Pls tell me if aging buckets are calculated based on a user entry ?
    Regards,
    Kumar

    Hi Voodi,
    Aging in the standard report is being calculated like below...
    1.For open items
    Posting date<key date
    Item status = O
    2.Posting date < keydate and clearing date > key date and net due date with offsets on keydate ( key date + 1 - keydate+30 --- for 1-30 days) like wise for all aging buckets.
    in this scenarion , key date is always system date ie today's date.
    But user wants to get all the invoices based on his user entry...
    is this possible with the same standard key date variable or do we need implement any other logic???
    Regards,
    Kumar

  • LIST OF STOCK  VALUES  BALACE REPORTS FOR DATE WISE

    Dear friends,
    In MB5L T.Code we can get period wise balance reports,but client's requirement is date wise Balance report,could you help me any kind of standard reports for date wise.
    Regards,
    Sabhapathy  R

    Dear Vishal,
    Thanks for your reply,mb5b only stock and  documents number  we can get client want to mb5l with date specific balance reports with GL account's.
    Regards,
    Sabhapathy R

  • Report for date variances between delivery and goods receipt date

    dear guru ,
    i search a standard report for date variances between delivery date in the purchase order and the goods receipt date.
    Do you help me ?
    Thanks

    Hi,
    Use Report ME80FN and here check the delivery schedule option in output screen.

  • How can i use FNDLOAD for XML reports and data defnitions

    I registerd concurrent program and linked xml reports and data defnitions in staging instance, and successfully moved to DEV.. after that stage is refreshed and when i download the details from DEV and uploaded to Stage only concurrent program i can upload...Wheteher we can use FNDLOAD Command for the Data definitions or Data template for the XML Report,used FNDLOAD for the concurrent program, it uploaded only concurrent program details.

    Hi,
    Use XDOLoader.
    Note: 469585.1 - How To Use XDOLoader?
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=469585.1
    Regards,
    Hussein

  • Report Completion date and Report start date in BI Publisher

    Guys
    We have a requirement to get the Report Completion date and start date without Scheduling the report. Can any one give me an idea to get in the BIP Reports
    Regards

    What is the requirement ?
    When the user run report from BIP EE, you want to display how long the report run ?
    or
    Where you want to display these info >?
    If you expecting these info, on click of viewbutton then i dont think it is possible, unless you write the query to fetch the time and in the template processing, subtract that from the current sys-time to get the time it took to run.
    if you can schedule then
    Simplest would be is , taking these info from the tables, directly for the report you are running.
    or
    use Public WS provided by BIP to get the report info
    but in order to get these, first of all the reports should be run in scheduled mode.
    if you don't want the report to be scheduled then, i don't think, you can get these kind of report completion status info.
    otherwise , you can run the query by yourself to get the data and the time it took to complete from database and do some sort of custom calculation by urself

Maybe you are looking for