Report Print Directly to Client Printer in Linux

Hi,
I m doing migration of Forms and Reports from 6i to 10g.
In this 6i form contain the Direct Report Print to Client Printer.
But in 10g, How to achive this,
I don't want to show the report in screen, i want directly report goes to Client Default Printer for Printing Purpose.
Can any one tel me if you have any solution.
Thanks
Gany

Thanks For you reply,
I already tried this, But I don't Know ,how to create Java Bean.
So Any Other Method is there.
If Any one know any other Solution for Print Directly to Client Printer.
Thanks,
Gany

Similar Messages

  • Send a report output directly to client printer in 10G

    I want to send my report output to client printer instead of report server printer without view report on screen.
    I am using RUN_REPORT_OBJECT built-in, but when I set REPORT_DESTYPE = PRINTER, it send report output to report server printer, I want it on local printer.
    regards
    Rehan Mirza

    Hello,
    <p>Here is a solution by Casey Bowden.</p>
    Francois

  • Print the Web report directly to client default printer

    I've config out report URL with following parameter to print report output directly to client's printer, but when querying the report, nothing occurs in this printer. I still get the message of "Task done successfully"
    "http://server:7777/KienReport/rwservlet?report=kien_output.rdf&P_JDBCPDS=hr/[email protected]:1521:ora9i&destype=PRINTER&desformat=PDF"
    Do you know how to config that?
    Thanks,
    Kien

    Do you solved this? can you tell me how to solve it.
    best regards.

  • How Can I print Oracle Report 9i directly To Printer on the local network?

    Dear All;
    How Can I print Oracle Report 9i directly To Printer on the local network?
    or to any other computer ? or to my default printer without prevoiues know the printer name i mean found it in my connected printer?
    plear help me?
    Best Wishes

    1. Check documentation for DESNAME and DESTYPE
    2. See 1 as long as they are a shared resource
    3. Think you must know the name, but please check or documentation
    Regards,
    Martin
    PS. There's a Reports Forum here which would be a better option for posting this question

  • Report Printing in Apex 4.x / Oracle Linux - Need Help

    Hi
    I am new to Oracle Application Express tool. I am trying to setup an Oracle Apex environment to start a new application development. So far, I have completed the following:
    1. Installed Oracle Linux 6.3
    2. Installed Oracle 11g Express (64 bit version). As you know, Oracle Apex is bundled in this.
    3. Completed the installation as per the documentation provided, and it works fine (I tried the following).
    - Able to connect to the DB via SQL*Net from other machines in the network.
    - Able to run Apex from other machines in the network.
    - Created new workspace and applications (pages etc) and they work fine.
    4. Downloaded the Apache FOP 1.1 binary and extracted the files under /usr (the extract created a directory fop-1.1 under /usr and all fop related files are there under this.
    5. Tested the fop by running "fop -fo <input_file> <output file>" from the $ prompt. It works fine.
    Now, I am stuck at setting up Report printing. Please note that, other that what is mentioned above, we have no other software installed on the server. Can someone guide me on how I can setup report printing with this software setup? Please help.
    Thanks

    Hi,
    With APEX you have two options for configuring a print server for PDF printing. BI Publisher and Apache FOP. The Apache FOP options actually refers to a J2EE app that we ship with APEX (see /utilities/fop/fop.war in your installation folder). This .war file needs to be installed on OC4J and then your APEX instance needs to be pointed to a specific URL in your print configuration, see more details here:
    http://www.oracle.com/technetwork/developer-tools/apex/application-express/configure-printing-093060.html
    When using the database 11g, you'll also have to enable networking services, which is also covered in the documented I mentioned above..
    Given what you outlined in your post, I'm assuming you're using the embedded gateway (built-in web server in the database). As an alternative, you might want to look at the APEX Listener, which actually has FOP built-in, so in your APEX Instance Administration you would only have to select the APEX Listener as the print options, and all the other config steps would not be needed
    More information on the APEX Listener can be found here:
    http://www.oracle.com/technetwork/developer-tools/apex-listener/overview/index.html
    Regards,
    Marc

  • Crstal report printing box like font when direct printng in firefox 23.0.1

    I am using Firefox 23.0.1 version and my crystal report direct printing by clicking the print button printing box like fonts but before this version it print well .As the same report is printing in the IE it is printing well.So question is that what update in firefox 23.0.1 makes this crystal report printing error.Has anyone a proper solution ?

    Did you change the character encoding for Firefox? If you are getting what looks like empty boxes instead of letters, it usually means that the character codes being used are not recognized by the font being used. It could also be that the font is corrupted. Did you check the font that you want to use?

  • Send report output directly to printer

    How can I do that using HTMLDB
    tks in advance.

    From HTML DB, I don't believe you can. Some work around's are discussed on the HTML DB forum - see HTML DB Report printing with printing options for a starting point.
    You can of cause run a SQL statement using the SQL Command line, and spool the output of that to a printer. How you do it differs based on which platform you are on.

  • Report printing problem in Oracle Report 10g

    Hi group,
    I have one report which I am callinng from form. Out put is comming directly in PDF format, While taking printout on EPSON Printer allignment is not comming properly.
    But If i convert in to text format and print from MS-DOS prompt on same printer it is comming properly.
    Now want to print same in report builder directly in first way. whole environment is on Oracle AS and server is LINUX and client machine is windows
    Please revert back, It can be a great help for me.
    Thanks & Regards,
    Narendra.

    you can solve this problem by using oracle remote printing utility(orarrp)
    Nizhad
    Software Engineer,
    Accel Frontline Limited,
    Kochi.

  • How to suppress extra form feed for character report printing using ORARRP?

    Dear All,
    We are using Oracle Application Server 10g (10.1.2.0.2) on Windows 2003 Server and most of our client PC's are Windows XP Professional machines. We are migrating our existing oracle application from 2-tier architecture to 3-tier architecture (6i to 10g). We have installed ORARRP utility for remote direct printing and to a limited extent we are successfull in getting the things work out for our system users, However, we are facing a problem using the ORARRP utility for which we are not able to find a solution till date.
    We have configured ORARRP utility on every user's PC and the printing of bitmap reports is working well. However, while printing CHARACTER reports using ORARRP utility, after the report gets printed, an EXTRA FORM FEED is issued by ORARRP to the printer and because of this the printer stationary skips one extra page and advances to the next page. Please note that this EXTRA FORM FEED happens only while printing a CHARACTER REPORT.
    Has anyone come across such a problem using ORARRP ? How can we avoid this extra FORM FEED from CHARACTER REPORT printing using ORARRP ? Is there any other tool which supports remote direct printing just like ORARRP?
    I shall be highly obliged if anyone could reply to my queries ASAP.
    Regards,
    KrishnaKumar S

    Please help ! I tried the "send_form_feed" and "postscript_dos_print" parameters without success. The extra form feed is always there. Thanks.

  • [PARTIALY SOLVED]Can't see SAMBA share or Printer in Linux

    Greetings all,
    I have built a headless server running Arch linux as the base OS.  I am running SAMBA and CUPS and performing all maintenance of this server via SSH.
    The SAMBA share I can see (read/write) on all the Windows 7 machines on the network as well as the Printer connected to the server.  But I can't see it when I open Thunar or PCManFM.  Nor can I access the printer.
    It's obviously something I am doing wrong but I have Googled different parameters trying to find a solution but have come up short.
    Your assistance and guidance in putting me in the right direction is most appreciated.  All my Linux machines are running Arch.
    Thanks,
    Ian
    Last edited by ichase (2012-10-28 07:19:14)

    I have looked high and low.  The printer is set up via CUPS and the printer in smb.conf is set to CUPS.  All 4 windows computers in the house now have this printer set as default and can print fine.
    But if I try to print in Linux, for example in Libreoffice, I get No default printer found.  Please choose a printer and try again.  When I click ok, the network printer does not show up for me to select.
    I have tried updating the /etc/cups/client.conf on the client computer and it is set as:
    # see 'man client.conf'
    homeserver /var/run/cups/cups.sock
    homeserver 192.168.X.XX
    From what I have read so far, this is correct.  When I go to the CUPS Web Interface it shows under Manage Printer my HP 7300 Series printer there and in idle waiting for job.  And in Windows I can print to it just fine.
    As far as I can  tell SAMBA is set up correctly (I can mount the file drive in Arch with no issues) and CUPS seems to be configured correctly as well from all that I have read.
    Any insight would be great,
    Thanks,
    Ian
    Last edited by ichase (2012-10-28 07:28:31)

  • Crystal Report Printing - A4 Issue

    Hello Experts,
    One of our customers use third party rental add-on with SAP B1. The add-on has cyrstal reports files. All these reports are set to letter size by default in report page setup. Client does not to print in A4 .
    When the user clicks on Print Preview / Print Icon on  rental order the , the report loads, but when sent to Printer for printing it becomes A4 (It should be letter).
    The rental reports works fine on the SAP Server, meaning when sent to printer it goes as Letter size which is what we want but this does not happen at Client's machine's.
    Also , i have an add-on running on my local machine and the reports prints in letter size with out any issue. I have been searching online regarding this issue but i haven't found any solution.
    Can any one advise me on this issue. Is there any setting that i can do in crystal or printer ?

    Is the default page size for the client's printer set at Letter or A4?

  • Report printing issue after upgrading from LV 8.2 to LV 2009

    Hello,
    I am upgrading an application from LabView 8.2 to LabView 2009. It uses the Report Generation Toolkit to create reports based on Word templates. The reports are pretty complicated, with a lot of bookmarks, tables, and graphs, but only one page long.
    The reports are generated correctly. However when sent to printing (using Print report.vi), the printer goes into spooling status and if you are patient enough you may get the report after at least 7 minutes. I tried changing the printer setting to "Print directly to the printer", as per an old KnowledgeBase article. No luck. I have installed a local printer. No luck again.
    If I close the LabView application while the printer is shown in spooling status, the report prints right away, every time.
    Never had this issue in LabView 8.2. On that machine I had Office XP. Now I have Office 2007...
    I do not get any error whatsoever, and I cannot figure out where the solution may be.
    I have one single report that prints right away every time I try. Coincidence or not, this is the only one that has no tables to print. It has graph though and plenty of bookmarks.
    I have exhausted all the ideas on how to deal with this situation, and I must find a solution ASAP. Any suggestion would be greatly appreciated.
    Thanks.

    Brandon,
    Thanks for your input.
    Not sure how I can use it to narrow down the problem though. I ran it, and I see that the printers are correctly identified, the default one is correctly found, however absolutely nothing is being printed out (I typed a text in the string control, and the Print control was on).
    Everything runs with no errors. I would prefer to see a bunch of errors ...

  • Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer

     Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer, And when Installing network printers from the domain controller it reports it cannot connect to printer.  I can ping all
    network devices. I can connect to the internet.
    On boot I get a netlogon 5719 error followed by service control manager errors 7023,7001 and a group policy error 1129.
    Clients can connect to the remote application and RDP operates to connect to the server internally and externally.
    The domain controller is another server 2008r2 box. I have scoured the internet but have not found any solutions that work yet.

    Hi,
    After referring to your post, it can be identified that the issue which you are facing is mostly due to some network issue in your environment. Please recheck your network connection issue between computer and domain controller. 
    Can you able to ping with IP address and also with fully qualified name of a domain controller in the users' and computers' domain. If it fails states that name resolution issue with computer and domain controller. Are you using MS DHCP Relay agent then there’s
    available Hotfix for the particular Event ID. Please go through this KB 2459530 to fix the error event ID.
    As per the net logon error 5719 which you are facing states that the client component of Netlogon was unable to locate a DC for the domain it was trying to perform an operation against. Below is one of the reason. If this is being logged on a DC and the event
    refers to the DC's own domain, something might be preventing the client component of Netlogon from starting a network session (to itself or to another DC in the domain). The following event 7001 & 7023 states start & stop operation service. Please
    go through beneath article for more details.
    1.  Event ID 5719 is logged when you start a computer
    2.  Netlogon 5719 and the Disappearing Domain [Controller]
    3.  Event ID 1129 — Microsoft-Windows-GroupPolicy
    Hope it helps!
    Regards.

  • Crystal Report print to PCL file needs to contain searchable text

    Hi,
    I am using VS(2005) and Crystal Report XI R2 .net Service pack 4.  I need to be able to create a pcl file that contains text information on the first page that needs to be parsed and read by another application.  However, I am not able to use a generic/text only pcl driver to do this because the remainder of the report (page 2 on) needs to contain lines and table borders as if it were printed to paper from the printer.  The report/print to file driver I have configured will produce a pcl file that meets my requirements when I print from Crystal XI R2 but when I use either the .Net view or I print directly form code all of the text in the pcl file is contained in an image. 
    Any suggestions on ways I can resolve this issue are greatly appreciated.
    Greg

    The CR.NET uses the .NET Framework print service for sending the output to the printer itself, where the page is sent as an image.  There's no way to alter this behavior within CR.NET.
    This is problematic for your task, as well as for tasks that rely embedded fonts or text strings (such as phone dialers, faxes, printer fonts, etc).
    Whatever you do, you'd have to do outside of CR.NET
    Sincerely,
    Ted Ueda

  • I need crystall report print button support insted of exporting to pdf then print

    Crystal reports are the most widely used reporting software.its print button is working on active X controls. due to the i am not able to use direct print button.
    so please help me to provide a plugin for crystal report

    Here is C# code for print crystal report
    cryRpt.PrintToPrinter(2, true, 1, 2);
    check this it will help you to print crystal reports
    http://csharp.net-informations.com/crystal-reports/csharp-crystal-reports-print.htm
    It may help you.
    merca.

Maybe you are looking for