Report printing through ORARRP

Dear Sir,
I have configured 9ias on red hat 7.2 and 9i database on windows 2000. While printing reports through IE 5.0 all the reports are skiping one extra page after printing of last page irrespective of number of pages in the report. if same report file is generated and given to printer using dos or linex dosen't skips extra page at end. It happens only if i print the report through ORARRP. The report file extension is '.rrpt'.
Thanking you.
Pramod Ingle

Hi Dev,
Thanks for the reply.
I want to print the ALV when the user clicks on a button in toolbar. Lets say the user has made some changes to the layout, (E.g hiding a field) and when i print that output it should use the changed layout, If i use the FM suggested by you, i cant acheive this.
If you try to print this manually, the system uses the changed layout and not the original. Thats why i want to know FMs/statement to print.
Regards,
Senthil.

Similar Messages

  • How to suppress extra form feed for character report printing using ORARRP?

    Dear All,
    We are using Oracle Application Server 10g (10.1.2.0.2) on Windows 2003 Server and most of our client PC's are Windows XP Professional machines. We are migrating our existing oracle application from 2-tier architecture to 3-tier architecture (6i to 10g). We have installed ORARRP utility for remote direct printing and to a limited extent we are successfull in getting the things work out for our system users, However, we are facing a problem using the ORARRP utility for which we are not able to find a solution till date.
    We have configured ORARRP utility on every user's PC and the printing of bitmap reports is working well. However, while printing CHARACTER reports using ORARRP utility, after the report gets printed, an EXTRA FORM FEED is issued by ORARRP to the printer and because of this the printer stationary skips one extra page and advances to the next page. Please note that this EXTRA FORM FEED happens only while printing a CHARACTER REPORT.
    Has anyone come across such a problem using ORARRP ? How can we avoid this extra FORM FEED from CHARACTER REPORT printing using ORARRP ? Is there any other tool which supports remote direct printing just like ORARRP?
    I shall be highly obliged if anyone could reply to my queries ASAP.
    Regards,
    KrishnaKumar S

    Please help ! I tried the "send_form_feed" and "postscript_dos_print" parameters without success. The extra form feed is always there. Thanks.

  • Report Printing Through Menu.........

    Hi
    i am going to print a Report from Menu with following settings..
    Destype=Printer,
    Desname=\\machin_name\printer_name,
    Paramform=yes
    There should be only one file,but here i got amazing result.
    I got 2 files..
    One before PARAFORM, whitch gives only HTML tags on paper after printing, and other is right one containing my report data.
    Any type of help will be apriciated
    thanks in advance
    thank you

    You have to pass the PRT file name as value for the DESFORMAT and use mode= MODE=CHARACTER.
    E.g.
    http://<host name>:<port>/reports/rwservlet?desformat=dflt&mode=character&.....

  • Oracle Reports Remote Printing Utility (ORARRP)

    Hi,
    Can Oracle Reports Remote Printing Utility (ORARRP) do chinese character printing?
    Thanks in advance.
    Regards,
    Edmund

    Hello,
    Check the link below.
    is it possible to printing report directly to printer from Form 10g ids
    -Ammad

  • Report Printing - Excel error

    Hi all,
    I'm not sure what's causing this error.
    With a regular report (not Interactive) region, I have enabled the report printing. All file types open/save correctly except for Excel.
    When opening the file, Microsoft Excel actually pops up this error:
    File cannot be opened because:
    The server did not understand the request, or the request was invalid.
    Error processing resource 'http://www.w3.org/TR/xhmtl1/DTD/xhtml1-strict.dtd'.
    Line 3, Position 57.
        "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">If I save the file and try to open it, Excel pops up this error:
    This XML file cannot be opened because of an error. Check to make sure the file is a valid XML file, and that the XML syntax is correct.
    You can also try re-creating the file and closing other applications before you attempt to open it again.Excel version is Excel 2002 SP3 (v10.x).
    Some additional info that might be helpful:
    When Excel is opening, the status bar shows it is "Opening HTML.XLA", the shows "Opening {filename}.xls" but fails halfway through that.
    Any ideas?
    Chris

    Hi Chris,
    This is the output I get when I click on the Print link
    <?xml version="1.0" encoding="UTF-8"?>
    <DOCUMENT>
        <DATE>04-AUG-08</DATE>
        <USER_NAME>nobody</USER_NAME>
        <APP_ID>17977</APP_ID>
        <APP_NAME>Test Export</APP_NAME>
        <PAGE_ID>1</PAGE_ID>
        <TITLE>Page 1</TITLE>
        <P1_ROWS></P1_ROWS>
        <P1_GO></P1_GO>
        <P1_REPORT_SEARCH></P1_REPORT_SEARCH>
        <REGION ID="4149756408582108901">
            <ROWSET>
                <ROW>
                    <COL1>value1</COL1>
                    <COL2>value2</COL2>
                    <COL3>value3</COL3>
                </ROW>
                <ROW>
                    <COL1>value12</COL1>
                    <COL2>value22</COL2>
                    <COL3>value32</COL3>
                </ROW>
            </ROWSET>
        </REGION>
    </DOCUMENT>Regards,
    Dimitri
    -- http://dgielis.blogspot.com/
    -- http://www.apex-evangelists.com/
    -- http://www.apexblogs.info/

  • Drill-Down Report Printing Problem for Selection Parameters

    Dear Experts,
    Have tried to configure Drill-Down Report for Vendor Balances,
    Am having trouble when printing this drill-down report, Printing is coming OK but it comes with ALL selection parameters, for e.g, have entered 20 vendor codes for the balance display, system first prints all selection parameters and then it prints the output of vendor balances,
    User does not want selection Parameters to be printed with the Report Output. Please find below screenshot for the problem.
    Input Parameter Screen
    Report Output Screen
    Print Preview Screen (First Page - Selection Parameters)
    Your help is much appreciated, if anyone can guide me, how to switch off selection parameters from Print Output of Drill-Down Report
    Thanks
    Regards
    P

    Hello Ms. Preeti,
    Thanks for your reply, Have designed the report through FKI0 (FKI*)
    Have already looked these setting, but these are not helping really, PFB screenshot for settings am having in my system, if you have any idea which can avoid User Input Parameters from printing then it will be really great help
    Thanks for your help
    Kind Regards
    P

  • Report printing problem in Oracle Report 10g

    Hi group,
    I have one report which I am callinng from form. Out put is comming directly in PDF format, While taking printout on EPSON Printer allignment is not comming properly.
    But If i convert in to text format and print from MS-DOS prompt on same printer it is comming properly.
    Now want to print same in report builder directly in first way. whole environment is on Oracle AS and server is LINUX and client machine is windows
    Please revert back, It can be a great help for me.
    Thanks & Regards,
    Narendra.

    you can solve this problem by using oracle remote printing utility(orarrp)
    Nizhad
    Software Engineer,
    Accel Frontline Limited,
    Kochi.

  • Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer

     Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer, And when Installing network printers from the domain controller it reports it cannot connect to printer.  I can ping all
    network devices. I can connect to the internet.
    On boot I get a netlogon 5719 error followed by service control manager errors 7023,7001 and a group policy error 1129.
    Clients can connect to the remote application and RDP operates to connect to the server internally and externally.
    The domain controller is another server 2008r2 box. I have scoured the internet but have not found any solutions that work yet.

    Hi,
    After referring to your post, it can be identified that the issue which you are facing is mostly due to some network issue in your environment. Please recheck your network connection issue between computer and domain controller. 
    Can you able to ping with IP address and also with fully qualified name of a domain controller in the users' and computers' domain. If it fails states that name resolution issue with computer and domain controller. Are you using MS DHCP Relay agent then there’s
    available Hotfix for the particular Event ID. Please go through this KB 2459530 to fix the error event ID.
    As per the net logon error 5719 which you are facing states that the client component of Netlogon was unable to locate a DC for the domain it was trying to perform an operation against. Below is one of the reason. If this is being logged on a DC and the event
    refers to the DC's own domain, something might be preventing the client component of Netlogon from starting a network session (to itself or to another DC in the domain). The following event 7001 & 7023 states start & stop operation service. Please
    go through beneath article for more details.
    1.  Event ID 5719 is logged when you start a computer
    2.  Netlogon 5719 and the Disappearing Domain [Controller]
    3.  Event ID 1129 — Microsoft-Windows-GroupPolicy
    Hope it helps!
    Regards.

  • Problem in oracle 10g web application report printing in character mode

    Hi,
    We are using oracle dev. 10g suite based web application.
    This is an application migrated from oracle forms & report 6i.
    It's working fine except printing report in character mode. When we run the report then preview is Ok but in printing format becomes wrong.
    I means printing is not same as preview.
    Can any one help me on this situation.

    you can solve this problem by using oracle remote printing utility(orarrp)
    Nizhad
    Software Engineer,
    Accel Frontline Limited,
    Kochi.

  • We are trying to implement a process so that any document that needs to be printed through our Java application will be printed as PDF using Adobe Reader.

    We are trying to implement a process so that any document that needs to be printed through our Java application will be printed as PDF using Adobe Reader.
    For which, We created and execute the below command line to call Adobe Reader and print the PDF on a printer.
    "C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe" /T "\\<Application Server>\Report\<TEST.PDF>" "<Printer Name>".
    Current Situation: The above command line parameter when executed is working as expected in a User's Workspace.
    When executed in a command line on the Application Server, it is working as expected.
    But, the same is not working while executing it from Deployed environment.
    Software being used: 1. Adobe 11.0 enterprise version. 2. Webshpere Application Server 8.5.5.2.
    Please let us know if there is a way to enable trace logs in Adobe Reader to further diagnose this issue.

    This is the Acrobat.com forum.  Your question will have a much better chance being addressed in the Acrobat SDK forum.

  • We are trying to implement a process so that any document that needs to be printed through our Java application will be printed as PDF using Adobe Reader. For which, We created and execute the below command line to call Adobe Reader and print the PDF on a

    We are trying to implement a process so that any document that needs to be printed through our Java application will be printed as PDF using Adobe Reader. For which, We created and execute the below command line to call Adobe Reader and print the PDF on a printer."C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe" /T "\\<Application Server>\Report\<TEST.PDF>" "<Printer Name>". Current Situation: The above command line parameter when executed is working as expected in a User's Workspace. When executed in a command line on the Application Server is working as expected. But, the same is not working while executing it from Deployed environment.Software being used: 1. Adobe 11.0 enterprise version. 2. Webshpere Application Server 8.5.5.2. Please let us know if there is a way to enable trace logs in Adobe Reader to further diagnose this issue.

    This is the Acrobat.com forum.  Your question will have a much better chance being addressed in the Acrobat SDK forum.

  • AR Invoice Printing Blank page when printed through printer

    Hi,
    I customized AR invoice to give PDF output through BI Publisher.There is no issue when tried to view the output.
    When tried to print the output through printer, It's given blank page.
    All other BI publisher reports which will give PDF output in Straight single request are printing through printer correctly.
    But AR invoice By standard program itself when fired, First a Multi Language Function will fire which will have output of 0 bytes and after that as a child request Original program with Required output will fire.
    It seems that printer is printing Parent request output.
    Can anyone please help me regarding this.
    Thanks in advance,
    Best Regards,
    Mahesh

    Hi,
    I'm guessing the concurrent program is outputting text (character mode) as opposed to PDF?
    This could be a number of reasons:
    1. Printer driver issue, e.g. the number of lines printed on the page is more than is defined for the printer driver: Try reducing the "Rows" on the current program definition
    2. Printer PRT issue, extra page break could be being inserted.
    3. The "box" in the report definition containing the address could be being expanding due to the extra address line, but not enough space so it forces a new page to be printed.
    Gareth
    Blog: http://garethroberts.blogspot.com
    Web: http://www.virtuate.com

  • RG1 Report printing.

    Hi All,
    We r not getting proper RG1 report print on A4 size with all records
    and format. Quantity are not coming on print view through J2iln
    transaction.
    Yusuf

    Hi
    Can you see the quantity on the print preview screen?
    If yes then that report is not meant for A4 size.
    If no then you will have to check with your ABAPer as to why the quantity is not seen.
    Regards
    Sandy

  • Probelem in Report Printing(urgent)

    Hello Everybody,
    This is Paritosh Sharma from India(Noida).I am facing a Probelem and the Probelem is when I am printing
    a Report output through an Espon(Dot Matrix) Printer after printing every page it skips another page.
    For Example : the output on Ist page is printed on Ist page and the output of 2nd page is printed on 3rd page and then again
    output on 3rd page get printed on 5th page.
    If anybody is having the solution for it den plz help me out
    I am using Report builder (D2k).
    Thanx & Regards
    Paritosh

    Maybe your layout is (a little bit) larger than the printable space on your printer.

  • Automated Word Report Printer from a Cluster filled with controls Vi

    I am sharing this Vi that i made to solve a problem i had.
    Basically this Vi will take what ever is inside a cluster  and print it to Word. you should have a Word template with Bookmarks to work. The bookmars name should be the same as the label of the control( i am explaining the function more in depth on the block diagram comments). This way you can make fancy word templates to print in the report your own values of your test.  
    express vis come limited in the number of inputs you can feed to a template. so this will make you life easier on printing a report. you just need to worry now about putting the values in the cluster.
    You can find it here 

    Hello, take a look at this article. Unfortunately the Generate Report Get Data to Modify.vi was remove since RGT 1.1.3 release. That being said, we can try to find a workaround. See "Configuring a Printer Through the Windows Dialog in LabVIEW", open the GetPrinterSettings.vi, at the PrinterSettings property node you can select the from/to page. I hope this helps.
    Alejandro | Academic Program Engineer | National Instruments

Maybe you are looking for