Report "RALM_ME_FUNCLOC_LIST" doesn't show new created func. locs.

Hi,
if I run the report "RALM_ME_FUNCLOC_LIST" with SE38 and selection parameter func. loc. typs "S" I don't receive a newly created func. loc.
If I do the same using transaction IH06 with the same parameter, I receive the newly created func. loc.
The same happens I I start the initial replication for func. locs. The newly created isn't transfered.
Any idea?
Thank you and regards,
Florian

Hello Florian,
Unfortunatly, if you look at the code a note is reffered: 772443 . There it says you cannot select from the FLTYP field (even if it is available for data entry).
Sorry,
Julien.

Similar Messages

  • Crystal Report for VS 2010 -  The report page doesn't show in IIS

    Hi all, I get a problem with Crystal Report for VS 2010 (version 13).
    My website is built using VS 2010 (asp.net 4.0) and Crystal Report v13.
    It work okay when I run it in the VS 2010. But when I host my site in the IIS 7, when going to the page that contain the Report, the report show nothing.
    The page is blank except my button I've created to export the Report.
    The weird thing is when I click the my button (export to pdf), it doest export the correct pdf.
    Note that this happens in my development machine: windows 7 32bit.
    I've spent a day figure out problem but still haven't found the problem.
    Hope you can help me.

    Let's start with the viewer. Sounds like the viewer directory is not configured correctly. Use [https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50aa68c0-82dd-2b10-42bf-e5502b45cd3a] article as a guide on how to do this.
    I still do not have info on the following:
    it means even though the crystal report viewer doesn't show, i still can export it's content to pdf.
    With all due respect, think of it this way;
    You're the mechanic. I'm a guy with a car. I text you; I'm sitting in my car. It will not get me to point A. Fix it.
    In a nut shell, that is what you are asking me to do with the export. The more detail you provide, the better. See if you can provide the info re export I requested in my previous post.
    Ludek

  • Mail doesn't show new messages

    Mail sometimes doesn't show new messages for an IMAP account. The badge in the dock says that there is a new mail but it doesn't show up in the inbox. I'm sure that I didn't just miss it, because, smart mailboxes will not find that new mail as well. When I restart mail, the mail finally shows up in the inbox as well.
    Anybody else seeing this and what can I do to resolve that issue?
    Thanks!

    I'll bring everyone up to speed on what's been happening with my family accounts. I first suspected Safari, because it seemed to be a local problem, but then, inexplicably, all mobileme mail accounts tied to that family account, which included 4 subaccounts and 1 mail-only account, not only did not work in mail.app, but also failed in other email clients I tested, including clients on Linux. Also, the webmail version was not working well, either.
    So, if your problem is isolated to a single computer and just to mail.app, or just with a particular network, then I think the local troubleshooting steps are the way to go.
    But, if your problem extends to other platforms, clients, and webmail, then it is likely an issue the engineers at Apple will have to figure out. I found the online chat service for mobileme users to be very helpful in checking through all the 'usual suspects' and after we had pretty much ruled out any of the usual culprits, it was escalated to the engineers, who are working on it now.
    They were able to release all the email that had been piling up, but there are still some glitches they are trying to iron out. As an aside, I have been personally managing various mail servers for a dozen years, and am well aware of the difficulties in diagnosing email problems, and it was stumping me, and I have intimate knowledge of Exim and Exchange and various email modules used with mx services.
    +While this 'should never happen', it's unrealistic for users to expect it never will. Of all the services provided on the Internet, email, is arguably the most complex service and it's become much more complex in the past few years. In my work, typically 94% of all email traffic hitting the server is filtered out as spam. So, the 6% that is allowed through is the stuff most of us see and are spending time and resources filtering out the 20-40% additional unwanted spam that the host let through because if they tightened it down any further the risk of false positives would become too great. I spend way more time on the mail service aspects of my job than the web services, and mail problems occupy at least 80% of my troubleshooting logs. So, while email seems more 'simple' than the exotic and bandwidth intensive services like video chat, voip, and web2 transactions, compared to the amount of wasted bandwidth and cpu cycles filtering packets, I think email is the number one problem service for most host providers. We tried to depend upon it for mission-critical communications, and it was never designed for that initially, and the spammers are making certain it won't achieve that status at least in the near future. If anything, email is your least dependable Internet service. Combine this with the growing array of user configurations, email clients, forwarding/retrieving/syncing scenarios, and user experience, and you may find yourself uttering a little prayer now and then for the poor email administrators and support personnel.+
    [end of sermon - thanx for letting me get that off my chest; I feel better now! I'll feel a lot better when my email is flowing smoothly, but that's out of my hands for now.]

  • Touch ignores new events in ical and iTunes doesn't show new calendars

    Hi
    i just set my Touch (2nd gen 2.1.1) back to the factory settings with a freshly created itunes lib.
    My problem was (and still is) that i couldn't sync new events from my macbook to the touch.
    i also created a new calendar to ical and checked if naming could be the reason. but the new calendar doesn't show up in the info part of itunes. even if i select replace all calendars on my ipod.
    an strange and annoying problem.
    cu assetburned

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                    
    Also see
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or                     
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • Disk Utility doesn't show new drive when trying to install Snow Leopard

    Please help because I've searched everywhere. My MacBook's hard drive failed. It's done for. I bought another internal, Western Digital 320gb WD3200BEVT. So it's brand new and when I boot from the Snow Leopard install I don't see the new hard drive in the Disk Utility App. All I see is my CD-Drive. No where is my new drive so that I can at least format it. People suggested on other forums that maybe it's the cables but i don't think it is cause the hard drive you just slide in and out. There are no jumpers on this drive either, so that's out. I've narrowed it down to two things, bad hard drive or this drive just isn't recognized by by Snow Leopard?

    If you have tried restarting a few times and it still doesn't show up I'm afraid you are gonna have to go back in and check the connections. I know they just slot into the carriage, but possibly it is not in tight. I can only suggest you open it up and check everything thoroughly. If after a thorough check, if it still does not mount you may want to take the hard drive back and swap it. Are you sure it was only a hard drive failure in the first place? I only ask this because WD hard drives have quite a solid reputation.

  • SMS inbox doesn't show new messages after upgrading to OS 5.0.0.681. SMS format appears as IM.

    My SMS inbox doesnt show new messages and also my Curve 8900 doesnt prompt for any new messages. However, the Mobiso application (which logs calls, texts) shows messages coming in with its text lengths. I asked this to Blackberryhelp on Twitter but it said to contact service provider, but there is nothing wrong with it. The format of the SMS inbox should have something wrong otherwise the Mobiso application should not have logged all messages.
    Please help me, i am missing all my daily SMS since last 20 days.
    Will degrading the OS help? Which is recommended OS version for BB Curve 8900?

    Hi,
    Here are some good articles listing the available methods for organizing and displaying messages in device OS 5.0. If you can't set your exact preferences I suggest looking in AppWorld for custom programs.
    Let us know how it goes!
    Thanks,
    Bifocals
    What is new in BlackBerry Device Software 5.0    
    Option for separate SMS and Email message inboxes is missing
    How to integrate SMS text messages with BlackBerry Messenger 5.0
    SMS text messages received from multiple senders appear in the same conversation thread on the Black...   
    Organizing your inbox’s main Messages list
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • N8 doesn't show new SMS messages

    Hi,
    i've recently noticed that my N8 does not show anything that there is a new SMS. I have to check every now and then for inbox for SMS:s to know if i have received an text message. I have checked for updates for firmware, but there is no newer available.
    What can i do for it?
    Best greetings
    Perttu

    There is a homescreen widget that will show new messages (plus missed events and calls), it is called "notifications" just edit the homescreen and add it
    Also you can get the menu button light to flash if you have unread messages, to set go to Settings > Phone > Notification Lights > notification light
    N8-00 pc059C9F6 Belle
    808 PureView pc059P6W5

  • Finder doesn't show new folders/files

    I've just created some new folders and files using the "save as" dialog from within Photoshop CS 8.0. Irritatingly, they don't show up in Finder. I can find them using the File>Open dialog in PS, or using, for example, Transmit.
    This seems like a very basic function of Finder which is clearly BROKEN.
    Changing views/directories/windows etc in Finder doesn't help, nor does quitting PS.
    Any hints on how to remedy and/or report this to Apple would be welcome.
    Message was edited by: NancyN

    It finally occurred to me to relaunch Finder (duh!) and now it shows the new files/folders.

  • Inbox Doesn't Show New Mail Until I Click Out of Inbox and Click Back In

    Hello, I originally posted this in the Microsoft Community, but I was told to post here instead. HELP!!! Nobody I know seems to have an answer for this.
    I have Outlook 2010 connected to Exchange (work email). Whenever I get new mail, I have to click out of the Inbox and then click back in, in order to see and open my new mail. I do receive the pop-up notification in the lower right hand corner, and
    I receive the "(1)" notification next to "Inbox" on the left side menu (that's how I know when I have new mail), but no actual email shows in the Reading/Window Pane. It's like I have to refresh my Inbox.
    The problem does not exist with any of my Inbox subfolders - only the Inbox itself.
    When I had my department help desk remote in, the problem ceased (making me sound crazy), but when the technician logged off remote access, boom, the problem was back.
    I've searched the internet, contacted my help desk multiple times, and deleted and re-created my Outlook profile, but nothing has worked so far.
    Any insight into this issue would be greatly appreciated, as this problem is a pain!

    Hi,
    Please check whether you can see the items in your Inbox using Online mode or Outlook Web Access or Outlook Web App (OWA). If you just cannot see them in your Cached mode profile, please start Outlook using the following command-line (Click
    Start and then click Run) to have a try:
    Outlook.exe /cleanips
    http://support.microsoft.com/kb/2330226
    If it doesn’t work, please change a new computer to have a try.
    Thanks,
    Winnie Liang
    TechNet Community Support

  • Mail 3.6 doesn't show new message in IMAP folder

    Hello,
    I am using Mail with an IMAP server.
    On this IMAP server, mails are automatically sorted to different mailboxes (IMAP folder) via .procmail.rc directives.
    When I receive an Email and when this email is dispatched in the correct mailbox, Mail3.6 doesn't display this new message.
    Questions : How to set-up Mail3.6 to correctly display new incoming mail server sorted in IMAP folder ? or How to overcome this Mail bug ?
    PS : This question was already asked a few months ago on Apple Bug Report, answer was that this bug will be corrected on the next release.... Seems not...
    Thank you by adance

    Hello,
    I am having a very similar problem that just started happening recently when I started using gmail folders instead of my school's email (both IMAP).
    I have all emails configured for IMAP and the messages arrive fine, but when mail applies my custom filters and the messages are moved to the individual folders, the new message indicator (on the file and on the dock icon) are not present. The only new messages that appear are those in the mail Inbox. When I then click on the individual folders (I have to click through them all individually) it recognizes the new, unread email and updates the indicators (both next to the custom folder and on the dock icon).
    This is a frustrating issue because I do not have any indication that I have new mail unless I go and click on each folder individually.
    The issue just started occurring when i switched to using my gmail account. The folders seem to be set up appropriately to move messages in Mail and also have them labeled on gmail ([GMAIL]/foldername), but Mail just doesn't seem to recognize the messages as new once they have been moved to the folders until I sync (either by clicking on the folder or by using the "synchronize all accounts" command).
    Any suggestions? I found this same issue in the archived questions (http://discussions.apple.com/message.jspa?messageID=7513842), but it was not resolved.
    Thanks,
    Daniel
    Message was edited by: dharveyfm

  • JPanel doesn't show new text after JLabel edit

    Hello,
    I am trying to create a custom progress bar-esk window to show users during lengthy methods.
    I have a new Thread which creates and displays a new ProgressWindow object (a JFrame with a JPanel and JLabel attatched). At second intervals the text of the JLabel attatched to this frame will change. however the text seen in the window is not updated.
    System.out's show the value of the JLable to be correctly changing.
    Here is the code for creating the Thread and window:
         Runnable r = new Runnable() {
                        public void run() {
                            try {
                                prog = new ProgressWindow();//creates the frame
                                prog.addStuff();//adds the components
                                prog.addListeners(inter);
                               while(true){
                                   prog.makeAnimation();
                            } catch (InterruptedException ex) {
                                ex.printStackTrace();
                            } catch (IOException ex) {
                                ex.printStackTrace();
                   new Thread(r).start();and the code within the ProgressWindow class which updates the label
    public void makeAnimation() throws InterruptedException, MalformedURLException {
            Thread.sleep(1000);
            if (dots == 0) {
                System.out.println("dots 0");
                labelPanel.remove(dotty);
                dotty = new JLabel("Analysing input  ");
                labelPanel.add(dotty);
                labelPanel.repaint();
                dots++;
            } else if (dots == 1) {
                System.out.println("dots 1");
                labelPanel.remove(dotty);
                dotty = new JLabel("Analysing input .");
                labelPanel.add(dotty);
                labelPanel.repaint();
                dots++;
            } else if (dots == 2) {
                System.out.println("dots 2");
                labelPanel.remove(dotty);
                dotty = new JLabel("Analysing input ..");
                labelPanel.add(dotty);
                labelPanel.repaint();
                dots++;    
            } else if (dots == 3) {
                System.out.println("dots 3");
                labelPanel.remove(dotty);
                dotty = new JLabel("Analysing input ...");
                labelPanel.add(dotty);
                labelPanel.repaint();
                dots = 0; 
        }I assume this is a threading issue, however I don't understand why the value is correctly changing, but not being repainted. I'd appriciate any insight :)
    thanks :)

    Fillis52 wrote:
    ..As for the SSCCE, I have looked at the linked site and honestly thought I had met the requirements. The code was formatted, and only the methods which presented the problem were given. Should I have included the code to create the window also?The first 'S' seems covered, but it is not SC, C or an E. Which part of the words associated with those letters are you having trouble understanding?
    If you had copy/pasted your code into the STBC (as recommended in the SSCCE document), it would have been obvious that it was not an SSCCE.
    Instead of being rebuked, I should be told what is missing from my post in order to create a SSCCE as i obviously dont know how to do it properly.You expect us to have a crystal ball? Instead of complaining, it would be more productive to be specific about what part of S-SC-C-E document you do not understand. And this time, read it carefully, don't skim it.

  • Portal Management doesn't show the created portal

    I have some problem with the Portal Management from evaluation version of the Weblogic
    Portal Server 7.0
    I followed the documentation from Bea and created a new Weblogic Portal Domain
    and a new Portal.
    The Portal i created worked but it is not shown in the Portal Management.
    Otherwise i have assigned this portal new portlets and other skins with EBCC but
    they are not available in the portal.
    Can anyone help me?

    This question is best suited to the Orac le9iAS Portal Security and Login Server forum.
    Thanks

  • Ipad2: Imovie was deleted, re-install doesn't show original created movies

    My daughter had created a number of movies in iMovie on the iPad.  Our first one was dropped and I took it to the Apple store and they replaced it (Thank You, Apple store Pioneer Square!!!!) 
    When I plugged the new one in, it re-installed everything, including all the movies that my daughter created, just as if it was the first iPad we had.
    Now, my other daughter(#2) just deleted iMovie, and when I re-installed it, it's like a new program, none of the movies daughter #1 created are on there.
    Seems like they must be on my computer if they re-installed on the new iPad after the first was broken.  Should I click "restore"?   Does that bring it back to factory specs or to the last backup?
    Any help is greatly appreciated!
    Note:  I've searched for this answer on my own for quite awhile now, through norums and Apple help, with no luck.

    If via iTunes on your computer you restore to the last backup then you will get whatever was stored in that backup back on the iPad - so anything that you've changed on the iPad since the backup was made will be removed from the iPad. You will need all the relevant apps on your computer's iTunes for the restore to work, as a backup contains an app's data and content, but not the actual apps themselves (so for the restore to work iTunes needs access to the apps so that it can install them and therefore their content).
    There is info/help on backups/restores here http://support.apple.com/kb/HT4079

  • JSC doesn't show newly created extended DataProviders

    Hi,
    I've been using JSC and Hibernate for a project.
    According to Sun's how to using Hibernate + JSC (developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/hibernate.html) , I've created a wrapper class which extends ObjectListDataProvider, but instead of creating the property on the SessionBean, I did it on the PageBean.
    The problem is that everytime I need to add another property to a page bean using one of my wrapper classes (extending ObjectListDataProvider), after following the how to instructions (compile the project, close and reopen), it doesn't appear as a property in the Outline panel.
    After a while building, cleaning, etc. I managed to get it done in one page, but on newly created pages, the property doesn't appear on the panel.
    Any ideas?
    P.S.: If I instantiate a ObjectListDataProvider property, it's shown correctly.
    Regards,
    Leonardo Eloy

    IMAP issue... fixed now.

  • Bug report: Website doesn't show flash data with version 11.4

    A website I've used for years no longer shows any data with the new version of Flash Player; I see a spinning "loading" wheel instead, which never stops spinning. Others using the site are having the same problem.
    I have removed 11.4 and installed 10.3 and all is well again.
    Website: gmws.edupage.org/timetable (the school schedule I administer). A timetable should appear, and clicking on "teacher", "class", etc. should give a dropdown list of options. (Try under 10.3 and you will see the correct behavior.)

    I've now fixed the timetable so it is using a non-Flash version. To see the problematic behavior, you will now have to navigate to gmws.edupage.org/timetable, and then click on the icon at the top of the page  which says "2012-2013 final schedule easily viewable" (this is the non-Flash version).  From the dropdown list that appears, choose the Flash version of the timetable, "2012-2013 final schedule (07/27 -..." and you will see the spinning wheel under 11.4, a proper school schedule under 10.3.

Maybe you are looking for