Report RBDAPP01 not processing IDocs in status 51

Hello guys,
I have a problem with the execution of some Inbound Idocs using program RBDAPP01.
Now the Idoc is executed in background with a job. Sometimes we have some locks because we receive idocs going to the same order, and then remain in status 51.
In the variant of the job we filled to execute Idocs with status 64 and 51, but the idocs that remain in status 51 are not processed, at the end we have to do it manually.
There is no parallel processo to avoid the locks.
Do you know how we can solve it?
Many thans in advance.
Regards,
Xavi.

i do have the same problem. is there an solution to this?

Similar Messages

  • Expense reports are not processing for future date?

    hi folks,
    in our co.expense reports are not processing for future date, even though the end date is one month from now the expense reports are not getting paid.
    can anybody assist me to come out of this issue.
    thanks in advance,
    regards
    bhanu

    HI,
               Could you please share how to go  Debug mode in Dymanic program, I have scenarion in SAP HR , when Employee is hire , during the hiring action Infotype 32 is updating based on following conditions
    ********INSERT IT0032 FOR CANDIDATE ID *************
    P0001-PERSG<>'5' - True
    P0000-MASSN='01'/X
    P0000-MASSN='H1'/X
    P0000-MASSN<>'84'/X
    P0000-MASSN<>'86'/X
    P0000-MASSN<>'99'/X
    GET_PNALT(ZHR_CREATEP0032)
    RP50D-FIELDS <> ''
    INS,0032,,,(P0000-BEGDA),(P0000-ENDDA)/D
    P0032-PNALT=RP50D-FIELD1
    P0032-ZZ_COMPID='05' _ True
                  Infotype record is being created but there is no data in "RP50D-FIELD1 , so i tried to debug the  subroutine GET_PNALT(ZHR_CREATEP0032) as mention in Dynamic action, its not going in debugger mode.
    Do you have any Idea about how to debug the  program.  used in dynamic action
    Regards,
    Madhu

  • Can I Re-process Idoc from status 68 to any other status?

    Can I re-process Idoc from status 68 to any other possible status?

    Hi,
    You can use this standard program RC1_IDOC_SET_STATUS to change IDoc status 68 to another status.
    Regards,
    Ferry Lianto
    Please reward points if helpful.

  • Processing idocs with status 8

    hi friends,
    how to process idocs with status 8

    Hi,
    Chek this thread which contains step by step procedure to process Idocs
    mannualy process idoc
    Also try these steps
    1. Goto Infopackage
    2. Click on the "Details" Tab of the Infopackage
    3. Goto Datapackage which is currently process
    4. Under the detail tab you can see
    Date, Time, Record... in that you can also see IDOC#
    5. Take the IDOC# and goto BD87 of the Sourcesystem
    6. Paste the IDOC# against IDOC
    7. Give IDOC Status = 64
    8. Give Partner system = "Your Source System"
    9. Execute BD87.
    10. You will navigate to next screen
    11. Maximize all by using "Expand Subtree" button on Menu
    12. You can see "IDOC stauts " column with 64
    13. Click on the row against to 64
    14. Click button "Execute" on Menu.
    15. Your IDoc will start processing
    16. If it success IDoc status will be turned to 53 else to 51.

  • RBDAPP01 is not processing Idoc's

    Hi,
    We are facing an issue that the RBDAPP01 program scheduled to process inbound Idoc's is not picking Idoc's for posting and running for ever with out processing Idoc's.
    Please let me know what could be the reason for this kind of behavior.
    Regards,
    Cheritha

    Hi ,
         Check your idoc is in 64 status ? If it in 64 process then process with RBDAPP01 in background or Put that idoc in BD87 and process in foreground.
    Thanks,
    Asit Purbey

  • Performance issues in using RBDAPP01 for reprocessing iDocs with Status 64

    Hi All,
    I am using the Standard ABAP Program 'RBDAPP01' for reprocessing Inbound iDocs with Status 64 (Ready to be posted).
    When this is scheduled as a job in background, I find that it opens multiple sessions and occupies all available dialog sessions.
    This in turn slows down the entire system.
    Also, I find the addition 'Packet Size' on the selection screen for the program.
    Is it related in any way to the number of sessions the program creates?
    Any pointers in resolving this issue will be extremely helpful.
    Thanks in advance.
    Regards,
    Keerthi

    Hi,
    When you mention Parallel Processing, it becomes active only if I choose that particular option on the selection screen right?
    In my case, I haven't chosen parallel processing, but still the overall system performance seems to have fallen very badly.
    Now please correct me if my understanding is wrong.
    If I increase my Packet Size, it should improve the system performance, but will increase my runtime for the selected iDocs.
    But as I have not selected parallel processing in this current situatuon, it should not have any impact here.
    Have I summarized it rightly?
    Thanks in advance.
    Regards,
    Keerthi

  • "Error during application input" while processing IDOC with status 51

    Hi ,
    I tried to post an error IDOC with status "51" of message type FIDCC2 using program RBDINPUT, it just creates a message "Error during application input" . It is not calling the application dialog . Does anyone have answer for this?
    Thanks,
    Hemant.

    HI,
    Kindly check the RFC entries in t-code SM58.
    If any entries are their please release them manually selecting each one and press "F6".
    Regards,
    Anil.

  • Report service not processing any new jobs 10.1.2.0.2

    I seem to have a job that is 'stuck' in the report queue when I start the report service through opmnctl.
    Windows Server 2003
    Server version is 10.1.2.0.2
    I set the trace options to trace_all, which has given me the following snippet from the rwserver.trc file:
    [2008/6/3 3:2:59:8] Debug 50103 (JobStore:writePersistFile): Purge persistent file done
    [2008/6/3 3:2:59:133] Warning 50103 (EngineManager:registerEngine): REP-55103: API URLEngine:getEngineEnvs not applicable to URL engine
    [2008/6/3 3:2:59:133] Info 56026 (EngineManager:registerEngine): Reports Server started up engine rwURLEng-0
    [2008/6/3 3:2:59:149] Debug 50103 (EngineManager:updateEngineState): Engine rwURLEng-0 status is 1
    [2008/6/3 3:2:59:149] State 56004 (EngineInfo:setState): Engine rwURLEng-0 state is: Ready
    [2008/6/3 3:2:59:227] State 56012 (IdleThread:run): Reports Server is ready
    [2008/6/3 3:2:59:227] State 50103 (IdleThread:run): ons notifier started
    [2008/6/3 3:2:59:227] Debug 50103 (JobManager:runCurrentJobs): Job 34 is a sync job :false
    [2008/6/3 3:2:59:227] Debug 50103 (JobManager:findDuplicatedJob): Found no duplicated job for job 34
    [2008/6/3 3:2:59:227] Debug 50103 (JobManager:firstToRun): job 34 is first to run
    [2008/6/3 3:2:59:227] Info 56020 (EngineManager:spawnEngine): Launching engine rwEng-0
    [2008/6/3 3:2:59:227] Debug 50103 (EngineManager:spawnEngine): Start engine command line = D:\oracle\10gappr2\jdk\jre\bin\javaw -server -cp "D:\oracle\10gappr2\j2ee\home\lib\ojsp.jar;D:\oracle\10gappr2\reports\jlib\rwrun.jar;D:\oracle\10gappr2\jlib\zrclient.jar" -Duser.language=en -Duser.region=US -Xmx256M oracle.reports.engine.RWEngine name=rwEng-0 server=repperthpmstr01opera ORACLE_HOME=D:\oracle\10gappr2 engineimplclass=oracle.reports.engine.EngineImpl traceopts=trace_all tracefile=D:\oracle\10gappr2\reports\logs\repPERTHPMSTR01OPERA\rwEng-0.trc tracemode=trace_replace cacheDir=D:\oracle\10gappr2\reports\cache keepConnection="no" server_ior=D:\oracle\Temp\repperthpmstr01opera_16094127_1212476579227
    [2008/6/3 3:2:59:227] Info 56021 (EngineManager:spawnEngine): Engine rwEng-0 has been launched
    [2008/6/3 3:2:59:227] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Initial
    [2008/6/3 3:3:0:227] Debug 50103 (JobManager:runCurrentJobs): Job 34 is a sync job :false
    [2008/6/3 3:3:0:227] Debug 50103 (JobManager:findDuplicatedJob): Found no duplicated job for job 34
    [2008/6/3 3:3:1:227] Debug 50103 (JobManager:runCurrentJobs): Job 34 is a sync job :false
    [2008/6/3 3:3:1:227] Debug 50103 (JobManager:findDuplicatedJob): Found no duplicated job for job 34
    The final two lines then repeat continuously.
    If another job is submitted through the application, the application displays a message that printing is in progress, but the job is never picked up by an engine (the conf file specifies 8 engines). The following is then written to the trace file:
    [2008/6/3 3:6:28:404] Debug 50103 (ConnectionImpl:runJob): Job queue for jobid = 48 is 0
    [2008/6/3 3:6:28:404] Debug 50103 (ConnectionImpl:runJob): jobid = 48 is in current queue
    [2008/6/3 3:6:28:435] Info 56013 (ConnectionManager:release): Connection 0 is released
    [2008/6/3 3:6:29:279] Debug 50103 (JobManager:runCurrentJobs): Job 34 is a sync job :false
    [2008/6/3 3:6:29:279] Debug 50103 (JobManager:findDuplicatedJob): Found no duplicated job for job 34
    Again, those last 2 lines continue to repeat.
    I have deleted the row with job_id 34 from rw_server_job_queue, restarted the report process, but the engine still tries to run this job.
    This problem is currently in a test environment. Our support department has encountered this recently twice and resolved it by re-installing the software. They can do this in 40 minutes, as opposed to spending hours trying to diagnose with potentially no solution. I'd like to be able to fix this in the test environment so they can be better prepared if it should happen sometime in production.
    Can anybody offer a suggestion what I should be looking into next? Please let me know if I haven't included enough info.
    Many thanks.

    After some trial and error, we found that a particularly badly written report was taking 10 minutes to process (it really should have only taken a few seconds). The users were getting impatient, killing the application from their terminal, and resubmitting the report, over and over and over....
    We re-wrote the query in the report, and with the report processing in an acceptable time, we did not re-experience the issue.
    Edited by: petesh on Oct 29, 2008 10:25 PM

  • Timeout when processing IDocs

    Hi,
    I have a problem when I process IDocs in CRM 5.0 system. The IDocs of BP are sent via middleware into my system. When I use BD87 to select some IDocs, it often to be timeout. And if I use report RBDAPP01 to process IDocs as a background job, it often took long time and not finished.
    I have looked at process via SM51, and found the progress seems to stay at program "SAPLBUBA_4" or "SAPLBUD_MEM".
    Do anyone know the cause of this problem? And how to solve it?
    Thank you very much for your help!
    Best regards,
    Long

    Hi,
    Instaed of sending bulk of idocs ,break them and schedule the program RBDAPP01..say there are 2000 idocs to be processed..
    For exmaple create a variant of say 1 to 1000 and then schedule the program RBDAPP01 and once again crerate another variant with 1001 TO 2000 and then once again schedule RBDAPP01..Now in this case 2 jobs will shedule with 1000 idocs...
    Regards,
    Nagaraj

  • Inbound Idocs are not Processing

    Hi,
    Inbound IDOCS queue is not processing if any one IDOC is showing amber(error) . Please let me know the resolution to avoid this issue or let me know the BASIS setting to avoid it.
    Regards,
    PVK.

    Hello,
    Can you please explain your issue is with "Trigger by Background program" or "Trigger immediately"?
    For Trigger immediately, if there is no free dialog work process available than IDocs are posted with status 64.
    For Trigger by Background program, Background job RBDAPP01 will process IDocs depending on variant you define to select & process IDocs(i.e., IDoc Status = 64).
    It is always recommended to use "Trigger by Background program" for high volume interface which has large number of IDocs.
    Help on RBDAPP01
    Regards,
    Sameer

  • Inbound Processing of Idocs with status other than success

    Hi,
           I am new to ALE/Idocs. Can anyone  please let me know how can I process the Idocs which have the status other than 53.
    Thanks &  Regards,
    Indira

    Hi,
    In addition to the previous posts few more programs to process failed inbound IDocs are as mentioned below.
    - Use program RBDAGAIE to process edited IDocs (IDocs with status 69)
    - Use program RBDAPP01 to process IDocs failing with serialization issue (IDocs with status 66)
    - Use program RBDAGAI2 to process IDocs after ALE inbound error (IDocs with status 56, 61, 63, 65)
    ~ Bineah

  • Resend IDocs in Status 03

    Hi there,
    is there a report/programm to resend IDocs of status 03 (or any other status). I know there is report RSARFCEX to resend IDocs after tRFC errors. But is there any way to send them in any case?
    Regards

    sorry, wrong forum

  • IDOC is not processing in R/3 with status 64(Urgent)--Production issue.

    Dear Folks,
    Here we are implementing MIRROR sytem for data extraction in to BIW.
    I had gone through the steps in PDF file(How to minimize down thime for Delta Initialization) which has given by SAP.
    These are following steps I had performed in BW production
    1. Using RSADMIN transcation- Assigned one user as a Debugging user.
    2. With the Debugging user Created one infopackage on Purhcasing ITM datasource--
        In data selection tab, I given date as from 2002 to 2003
        In Update tab, I selected update mode as Initialize Delta process-               without data transfer and Uncheck Update Data in master   system immediately
       In schedule tab I selected option Start Data load immediately then Start extraction.
    3.Data was requested and It was intialized properly with green status 1 from 1 Records.
    4. In details tab Request, Extraction, transfer(IDOC and TRFC), Processing everything in Green color.
    5.As per document I have checked in R/3 for IDOC with status 64 using transaction BD87/WE05
    Problem is that IDOC is not processing in R/3 system. for that IDOC I have checked in BW montior screen using the option <b>IDOC list in Source sytem</b>, here also it is not showing any IDOCs.
    Please let me know why BW sytem is not sending any IDOCs to source sytem.Is there any settings I could have miss in BW aswell as in R/3 system.
    Note: In BW production I successfully loaded master data from R/3. aswell as I triggered infopackage-Initialization with data transfer, it is showing IDOC number properly in R/3 system.
    Points is Assured for all replies.

    Hi,
    - check you RFC destination (normal test + authorization test)
    - Check you partner profiles in WE20 and its ports WE21
    - from the source system tree (RSA13) right click your source system and perform a check
    - the best is to restore your source R/3 source system from BW (right click on it ans select RESTORE); you'll need to be able to log in the source system as an admin as well as opening the source system for customizing in SCC4 so that BW can recreate the correct partner parameters automatically; the best is to do that with your basis group.
    hope this helps,
    Olivier.

  • Idoc in 53 status but not processed completely. Missing authorisation error

    Hi ,
    Some of the ORDER Idocs are in 53 status, but the orders are not processed successfully and no PO created for these Idocs.
    They got below warning message when I checked in WPER transaction code.
    " Missing authorization: Purchase Order Create Purchasing Grou 110 " - "Workitems (tasks) were created for this IDoc"
    This is happening once in a while for some of the idocs. Remaining all idocs are posting successfully.
    These IDOCu2019s are processed via user background. Not sure why we have authorisation issues as this user has SAPALL. Any ideas?
    Thanks
    Deepthi.

    done.

  • Idocs neding in 64 status and not processed further

    Hi
    We have inbound idocs of FIDCC2 message type, which are set to be triggered immediately. However we have noticed that sometimes (not always) these idocs are in 64 status and are not processed further. We have to manually reprocess them.
    What could be the problem? Where should we start investigating?
    Any help would be appreciated.
    Thanks
    Mick

    I think the comment by Gautham Vangaveti  is probably correct.
    We hit the same issue occassionally.  We have IDOCS as trigger immediately, but at the time they try to process, there are no available work processes which can handle the IDOC and they sit at status 64.
    There is an oss note 1333417 which describes the situation
    https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1333417
    And unhelpfully suggests changing over to processing by batch job, which is not always appropriate.
    It may be worth enlisting help from you Basis team to try and indentify if those going to status 64 are occuring at the same time each day, and maybe looking to see what other processes are running at that time.  If the load on the system can be managed then the problem may go away, it did for us.
    Otherwise, Basis may be able to increase the number of work process which may also resolve the issue.

Maybe you are looking for